aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* gemini: Classify Raidsonic NAS IB-4220-B as a NASChristian Lamparter2019-03-251-0/+1
| | | | Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* gemini: D-Link DNS-313 is a NASChristian Lamparter2019-03-251-0/+1
| | | | Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: MBL: set DEVICE_TYPE to NASChristian Lamparter2019-03-251-0/+1
| | | | | | The MyBook Live is a NAS. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* toolchain: ARM: Fix option conflict with multiarchBoris Krasnovskiy2019-03-251-0/+5
| | | | | | | | | | | | This problem exposed when compiling glibc, but applicable across the board. gcc compiles runtime libraries for all supported architectures, unless otherwise specified, and later selects applicable library based -m[arch,cpu,*] options, thus these options should not be passed to gcc as they break the compilation process. Signed-off-by: Boris Krasnovskiy <borkra@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [modified so it only touches ARM - I'm too chicken, changed authors email]
* toolchain: ARM: Fix toolchain compilation for gcc 8.xBoris Krasnovskiy2019-03-252-22/+6
| | | | | | | | | | | | | | | | | | | | | | | | Set the toolchain's ARM CPU and FPU architectures by utilizing' gcc's --with-cpu / --with-fpu configure options that: "Specify which cpu variant the compiler should generate code for by default. cpu will be used as the default value of the -mcpu= switch." This will resolve the following kernel compilation failures under gcc 8.x on ARM because the kernel wants to set (possibly conflicting) optimization flags. .../ccyVnmrs.s:204: Error: selected processor does not support `dmb ish' in ARM mode .../ccyVnmrs.s:215: Error: architectural extension `mp' is not allowed for the current base architecture .../ccyVnmrs.s:216: Error: selected processor does not support `pldw [r4]' in ARM mode Because this is a big change, the .config and toolchain need to be refreshed (as in removed and regenerated). Reported-by: Ansuel Smith <ansuelsmth@gmail.com> Reported-by: Daniel Engberg <daniel.engberg.lists@pyret.net> [#1203] Signed-off-by: Boris Krasnovskiy <borkra@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [extended commit message, removed now-deprecated CPU_CFLAGS, changed author to gmail address]
* ipq40xx: essedma: Add fix for memory allocation issuesChristian Lamparter2019-03-242-0/+394
| | | | | | | | | | | | | This patch adds a ChromiumOS 3.18 patch [0] that fixes memory allocation issues under memory pressure by keeping track of missed allocs and rectify the omission at a later date. It also adds ethtool counters for memory allocation failures accounting so this can be verified. [0] <https://chromium.googlesource.com/chromiumos/third_party/kernel/+/d4e1e4ce6801f9eddce056c58f5a288864955265> Reported-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* tools/ccache: update to 3.6Deng Qingfang2019-03-242-3/+3
| | | | | | Update ccache to 3.6 Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: allow packets with ttl=0Felix Fietkau2019-03-241-2/+2
| | | | | | | Some broken ISPs (e.g. Comcast) send DHCPv6 packets with hop limit=0. This trips up the TTL=0 check in the PPE if enabled. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath79: add support for COMFAST CF-E5/E7Ding Tengfei2019-03-245-10/+175
| | | | | | | | | | | | | | | | | | | | | | | | COMFAST CF-E5/E7 is a outdoor 4G LTE AP with PoE support, based on Qualcomm/Atheros QCA9531. Short specification: 2x 10/100 Mbps Ethernet, with 24v PoE support 64 MB of RAM (DDR2) 16 MB of FLASH (SPI) 2T2R 2.4 GHz, 802.11b/g/n built-in 1x 3 dBi antennas output power (max): 80 mW (19 dBm) Qucetel EC20 LTE MODULE(1x external detachable antenna) Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Ding Tengfei <dtf@comfast.cn> [commit subject fix] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: add TP-Link TL-WR710N v1Marcin Jurkowski2019-03-244-0/+149
| | | | | | | | | | | | | | | | | | | | | This commit adds support for TP-Link TL-WR710N v1 router. CPU: Atheros AR9331 400MHz RAM: 32MB FLASH: 8MiB PORTS: 1 Port 100/10 LAN (connected to a switch), 1 Port 100/10 WAN WiFi: Atheros AR9331 1x2:1 bgn USB: ChipIdea HDRC USB2.0 LED: SYS BTN: Reset Sysupgrade from `ar71xx` works without glitches. Network interfaces assigned for LAN and WAN ports are `eth1` and `eth0` respectively, what's consistent with `ar71xx` target. Wireless radio path is automatically upgraded from `platform/ar933x_wmac` to `platform/ahb/18100000.wmac`. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
* ath79: add support for TP-Link TL-WR941N v7 (CN)Chuanhong Guo2019-03-243-2/+138
| | | | | | | | | | | | | | | | | This adds support for the Chinese version of TL-WR941N v7. It uses QCA9558+AR8236 while the international version uses TP9343 instead. Specification: - SoC: Qualcomm Atheros QCA9558 - Flash: 4 MB - RAM: 64 MB - Ethernet: Atheros AR8236 with 5 FE ports Flash instruction: Upload the generated factory firmware on web interface. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ath79: ag71xx: remove switch driver in ag71xxChuanhong Guo2019-03-242-1345/+0
| | | | Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ath79: use ar8216 for builtin switchChuanhong Guo2019-03-247-10/+17
| | | | Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: introduce qca,mib-poll-interval propertyChuanhong Guo2019-03-242-2/+13
| | | | | | | | This allows users to specify a shorter mib poll interval so that the swconfig leds could behave normal with current get_port_stats() implementation. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: do a software reset for switch during hw_initChuanhong Guo2019-03-241-0/+3
| | | | | | | | | | | | | | This applies to ar8216 and ar8236. QCA's newer U-boot will enable the switch mdio master for FE switches which makes phy inaccessible from CPU mdio. (e.g. on TP-Link TL-WR941N v7 Chinese version which uses QCA9558+AR8236.) For these devices PHY probing is broken and mdio device probing is a must. We also need to disable switch mdio master in driver for later PHY initialization. Do a soft reset during hw_init so that mdio master can be disabled and expose PHYs to CPU mdio for later PHY accessing. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: mib_work_func: read all port mibs everytimeChuanhong Guo2019-03-242-9/+5
| | | | | | | | ar8xxx_mib_capture will update mib counters for all ports. Current code only update one port at a time and the data for other ports are lost. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: add support for get_port_stats()Chuanhong Guo2019-03-243-25/+59
| | | | | | | | | | | | | | | | | | | | | | | Partially reverts commit eff3549c5883a9abc5dbff00c084cabbcfdf4437. AR7240 and AR9341 have buggy hardware switch LED trigger. The AR7240 one doesn't blink and the blinking of port0/port5 is reversed on AR9341 if we swap PHY0 and PHY4. (Only blinking is reversed, which means LED for PHY0 will lit when PHY0 is link up and will blink when PHY4 has active link and vice versa.) On these two chips a software swconfig LED trigger is required. This commit adds swconfig port stats back but: 1. move checking of mib_t/rxb_id into ar8xxx_chip since we can't distinguish ar7240sw and ar8216 using only chip id. 2. don't update mib counter in get_port_stat. This function is called every 0.01s and this capturing procedure will take up a lot of CPU. We already have a mib_work_func updating mib counters every 2s so return the saved counter instead of fetching new data. The blinking rate will be weird but it should solve the previously mentioned CPU time problem. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: add support for ar724x/ar933x builtin switchChuanhong Guo2019-03-242-6/+112
| | | | | | | | | | | | | | This builtin switch is a bugless ar8216 with different mib counters and gigabit cpu port. Atheros uses the same device ID and it's impossible to distinguish the standalone one and the builtin one. So we add support to mdio device probe only. This switch doesn't have buggy vlan tag so it's not needed to enable atheros header. This commit changed ar8216_setup_port so that it can be reused for this switch. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: mdiodev: add qca,phy4-mii-enable optionChuanhong Guo2019-03-241-0/+6
| | | | | | This option allows setting phy4 as a phy connected directly to CPU. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: ar8229: add phy_read/phy_writeChuanhong Guo2019-03-242-0/+57
| | | | | | | the added function also works for ar8216 and will be used in the following ar7240 support. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: add support for separated mdio bus for phy accessChuanhong Guo2019-03-242-1/+37
| | | | | | | | | | | | | | Atheros FE switches have a builtin mdio master available for PHY accessing and on ar724x/ar933x builtin switches this mdio master is the only way of accessing PHYs. After this patch if there is phy_read/phy_write method available in ar8xxx_chip we register a separated mdio bus for accessing PHYs. Still adds support for mdio device probing only since this isn't needed for those switches registered using PHY probing. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: add support for ar8229Chuanhong Guo2019-03-242-5/+144
| | | | | | | | | | | | | | | | ar8229 is the builtin switch in ar934x and later chips. There is also a standalone version available and their registers/functions are the same. This commit added support for the builtin ar8229. The only thing missing for standalone ar8229 should be phy modes. Since I don't have a router using that, this commit doesn't add support for other phy modes. Only add its support for mdio-device probing method because the current PHY probing can't return 1G speed when it's a FE switch. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: add mdio-device probing supportChuanhong Guo2019-03-241-1/+134
| | | | | | | currently only ar8327 and ar8236 are added since they are the only two I could verify. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: move ar8xxx_id_chip into ar8xxx_phy_probeChuanhong Guo2019-03-241-4/+4
| | | | | | | | ar8xxx_id_chip is used to determine current ar8xxx_chip using switch id and this isn't needed during mdiodev probing. Move it out of ar8xxx_probe_switch so that we can skip it. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: add device struct into struct ar8xxx_privChuanhong Guo2019-03-243-2/+5
| | | | | | dev has been taken up by switch_dev so it's named pdev instead. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: drop duplicated includeChuanhong Guo2019-03-241-1/+0
| | | | Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: move chip id reading into a separate functionChuanhong Guo2019-03-241-1/+12
| | | | | | | | | for mdio-device probing we still need to read chip id but ar8xxx_chip can be determined using drvdata. We can't distinguish the buggy standalone ar8216 and the builtin ar8216 in ar724x/ar933x using chip id. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ath79: add support for linux 4.19Chuanhong Guo2019-03-2440-0/+7053
| | | | | | | | | | | | | | | | | | | | | The following patches are dropped because they are merged upstream: -0001-tty-serial-drop-QCA-pecific-SoC-symbols.patch -0006-usb-drop-deprecated-symbols.patch -0009-MIPS-ath79-add-lots-of-missing-registers.patch -0010-MIPS-ath79-add-support-for-QCA953x-QCA956x-TP9343.patch -0014-MIPS-ath79-finetune-cpu-overrides.patch -0015-MIPS-ath79-enable-uart-during-early_prink.patch -0016-MIPS-ath79-get-PCIe-controller-out-of-reset.patch This patch is dropped due to the introduction of spi-mem framework: -461-spi-ath79-add-fast-flash-read.patch Thank to Michael Marley @mamarley for his work on this patch: -910-unaligned_access_hacks.patch Signed-off-by: Chuanhong Guo <gch981213@gmail.com> [synchronized kernel config with make kernel_oldconfig] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: ag71xx: pass correct device pointer to dma functionsChuanhong Guo2019-03-241-7/+7
| | | | | | | | | linux 4.19 doesn't accept a NULL device for these functions. It also complains that the device struct in net_device doesn't have a dma_mask set. Pass the device struct from platform_device for these functions. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ath79: ag71xx: add support for timer functions in linux 4.15+Chuanhong Guo2019-03-241-0/+10
| | | | | | | Kernel newer than 4.15 dropped "data" field and used from_timer to cast out the parent struct pointer for current timer. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: add support for DLINK DIR-510LPawel Dembicki2019-03-245-0/+161
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DIR-510L Wireless Router are based on the MT7620A SoC. Specification: -MediaTek MT7620A (580 Mhz) -128 MB of RAM -16 MB of FLASH -802.11bgn radio -1x 10/100 Mbps Ethernet -2x internal, non-detachable antennas -UART (J3) header on PCB (57600 8n1) -1x bi-color LED (GPIO-controlled), 2x button -JBOOT bootloader Known issues: -Ethernet port is used as LAN -No communication with charger IC. (uart bitbang needed) Installation: Apply factory image via d-link http web-gui. How to revert to OEM firmware: 1.) Push the reset button and turn on the power. Wait until LED start blinking (~10sec.) 2.) Upload original factory image via JBOOT http (IP: 192.168.123.254) 3.) If http doesn't work, it can be done with curl command: curl -F FN=@XXXXX.bin http://192.168.123.254/upg where XXXXX.bin is name of firmware file. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [fixed whitespace issue in 10-rt2x00-eeprom] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* firmware-utils: mkdlinkfw: add kernel image offsetPawel Dembicki2019-03-243-37/+32
| | | | | | | | Some boards with JBOOT have partiton between bootloader and kernel image. This patch add possibility to change kernel partition start address. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ramips: fix wrong i2s clock unit from kHz to MHzQin Wei2019-03-241-1/+1
| | | | | | | | | | | clk_get_rate returns the current clock rate in Hz for a clock source so if we divide it by 1M, then we get frequency in MHz and not kHz. Signed-off-by: Qin Wei <support@vocore.io> [added missing commit message, and fixed author with SoB from PR message] Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mt76: update to the latest versionFelix Fietkau2019-03-231-3/+3
| | | | | | | | | | | | | 4d8c7e8 mt76: mt76x02: send no-skb tx status without holding the status lock 7e9e9ad mt76: mt7603: add missing initialization for dev->ps_lock 3a7e6bb mt76: fix potential deadlock on cancelling workqueues deacb8f mt76: fix using mac80211 tx skb header padding c9402eb mt76: use napi polling for tx cleanup 60e508e mt76: use readl/writel instead of ioread32/iowrite32 5912e8a mt7603: fix sequence number assignment 95a83cc mt7603: send BAR after powersave wakeup Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 4.14 to 4.14.107Koen Vandeputte2019-03-2210-32/+22
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.164Koen Vandeputte2019-03-224-10/+10
| | | | | | | | | Refreshed all patches. Compile-tested on: ar7 Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* imx6: fix legacy IRQ support (4.19)Koen Vandeputte2019-03-222-0/+50
| | | | | | | | | | | | | | | The PCIe DWC host controller is now using MSI (Message-signaled-interrupts) by default. While ath9k itself does support MSI here, a lot of wlan adapters do not. Avoid non-functioning cards by simply continue to disable MSI for now. This can be done by appending "pci=nomsi" to the boot cmdline. Also an extra fix needs to be backported which avoids MSI initialization which prevented legacy IRQ's init from taking over. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* imx6: enable PCIe (4.19)Koen Vandeputte2019-03-221-0/+9
| | | | | | | The DWC host controller symbols are now depending on a few others Fixes: ca1b93f038a5 ("imx6: add support for kernel 4.19") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* imx6: enable crypto acceleration (4.19)Koen Vandeputte2019-03-221-5/+8
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* imx6: enable crypto accelerationKoen Vandeputte2019-03-221-5/+8
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* imx6: refresh kernel configsKoen Vandeputte2019-03-222-5/+5
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* glibc: update to latest 2.27 commitHans Dedecker2019-03-221-2/+2
| | | | | | 1ab314d8d3 S390: Mark vx and vxe as important hwcap. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ath79: Add support for Ubiquiti NanoBeam ACTobias Schramm2019-03-225-0/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NanoBeam is a small AR9342 based directional 5 GHz AC CPE with hardware almost identical to the Ubiquiti NanoStation AC loco. Over the NanoStation AC loco it has 5 additional LEDs. Four of those LEDs are used as rssi indicators, the fifth LED is used as an ethernet link/activity indicator. CPU: Atheros AR9342 SoC RAM: 64 MB DDR2 Flash: 16 MB NOR SPI WLAN: QCA988X Ports: 1x GbE Flashing procedure is identical to the NanoStation AC loco and can be performed either via serial or the factory firmware upgrade. Serial flashing: 1. Connect to serial header on device (8N1 115200) 2. Power on device and enter uboot console 3. Set up tftp server serving an openwrt initramfs build 4. Load initramfs build using the command tftpboot in the uboot cli 5. Boot the loaded image using the command bootm 6. Copy squashfs openwrt sysupgrade build to the booted device 7. Use mtd to write sysupgrade to partition "firmware" 8. Reboot and enjoy Flashing through factory firmware: 1. Ensure firmware version v8.5.0.36727 is installed. Up/downgrade to this exact version. 2. Patch fwupdate.real binary using `hexdump -Cv /bin/ubntbox | sed 's/14 40 fe fe/00 00 00 00/g' | hexdump -R > /tmp/fwupdate.real` 3. Make the patched fwupdate.real binary executable using `chmod +x /tmp/fwupdate.real` 4. Copy the squashfs factory image to /tmp on the device 5. Flash OpenWRT using `/tmp/fwupdate.real -m <squashfs-factory image>` 6. Wait for the device to reboot Thanks to @cybermaus for testing! Tested-by: Maurits van Dueren den Hollander <cybermaus@gmail.com> Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
* ar71xx: Add support for Mikrotik RB SXT 2nD r3Xavier Douville2019-03-226-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The Mikrotik RouterBOARD SXT 2nD r3 is an outdoor WiFi AP / CPE with a single 2.4 GHz radio and a 100 Mbps Ethernet port. The device similar to the SXT 2nD r2, but it has SPI NOR flash instead of NAND flash. Hardware -------- CPU: Atheros AR9344 (600 MHz) RAM: 64 MiB FLASH: 16 MiB SPI NOR W25Q128 ETH: 1x 100 Mbps Atheros AG71xx WiFi: 2T2R 802.11b/g/n (ath9k) Power: Passive PoE 8-30 V Installation instructions: 1. Boot openwrt-ar71xx-mikrotik-vmlinux-initramfs.elf using a DHCP+TFTP server. 2. Erase the "firmware" partition using the mtd command. This should no longer be required once this patch is merged. 3. Use sysupgrade to install to flash. The file openwrt-ar71xx-mikrotik-rb-nor-flash-16M-squashfs-sysupgrade.bin should be used. Signed-off-by: Xavier Douville <github@douville.org>
* build: suppress error output in feeds.mkFlorian Eckert2019-03-221-1/+1
| | | | | | | | | | | If no feed.conf or feeds.conf.default is found on image generation with the imagebuilder we always get the following message "Unable to open feeds configuration at <dir>/scripts/feeds line 48." on std error. To get rid off this needless warning on image generation with the imagebuilder supress the output in feeds.mk. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* netifd: update to latest git HEADHauke Mehrtens2019-03-211-3/+3
| | | | | | | a8cf037 netifd: wireless: Add support for GCMP cipher 34a70b6 netifd: wireless: Add support for 802.11ad Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ubox: update to latest git HEADHauke Mehrtens2019-03-211-3/+3
| | | | | | a782779 kmodloader: increase module name length Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* iwinfo: update to latest git HEADHauke Mehrtens2019-03-211-3/+3
| | | | | | | ce1814b iwinfo: Add device ID for Wilocity Wil6210 a8e8275 iwinfo: Add support for 802.11ad Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "valgrind: enable LTO and refresh patches"Hauke Mehrtens2019-03-211-1/+0
| | | | | | | | | This reverts commit 0331770299b1587a96285fd1af33afe6de4ecbb9. With LTO enabled valgridn does not build on MIPS32 any more, deactivate it for now. The patch refresh was not reverted. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* libnftnl: bump to latest versionRosy Song2019-03-211-3/+3
| | | | Signed-off-by: Rosy Song <rosysong@rosinson.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 05:58:33 +0000