aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* generic: platform/mikrotik: support LZOR encodingThibaut VARÈNE2020-05-121-1/+261
| | | | | | | | Some newer MikroTik RouterBOARD devices use a new encoding scheme for their WLAN calibration data. This patch provides support for decoding this new scheme. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ar71xx: enable mikrotik platform driverThibaut VARÈNE2020-05-121-0/+2
| | | | Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* generic: mikrotik platform build bitsThibaut VARÈNE2020-05-122-0/+39
| | | | Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* generic: routerboot sysfs platform driverThibaut VARÈNE2020-05-125-0/+717
| | | | | | | | | | | | | | | | | | | | | | | | | This driver exposes the data encoded in the "hard_config" flash segment of MikroTik RouterBOARDs devices. It presents the data in a sysfs folder named "hard_config". The WLAN calibration data is available on demand via the 'wlan_data' sysfs file in that folder. This driver permanently allocates a chunk of RAM as large as the "hard_config" MTD partition (typically 4KB), although it is technically possible to operate entirely from the MTD device without using a local buffer (except when requesting WLAN calibration data), at the cost of a performance penalty. This driver does not reuse any of the existing code previously found in routerboot.c. This driver has been successfully tested on BE (ath79) and LE (ipq40xx and ramips) hardware. Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Tested-by: Baptiste Jonglez <git@bitsofnetworks.org> Tested-by: Tobias Schramm <t.schramm@manjaro.org> Tested-by: Christopher Hill <ch6574@gmail.com> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* kernel: bump 4.14 to 4.14.180Koen Vandeputte2020-05-121-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx, cns3xxx, imx6 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath79: dts: add missing 'serial0' alias for TP-Link TL-MR3040v2Lech Perczak2020-05-111-0/+1
| | | | | | | | | Out of all devices currently supported based on AR9331 chipset, this one had the 'serial0' alias missing. Add it to fix setting of /dev/console and login shell on the onboard UART. Signed-off-by: Lech Perczak <lech.perczak@gmail.com> (cherry picked from commit 94f344997769a9a18e2d73574d9d17785828955d)
* opkg: Fix PKG_MIRROR_HASHHauke Mehrtens2020-05-081-1/+1
| | | | | Fixes: c61fbdd0879b ("odhcpd: fix PKG_SOURCE_DATE") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-firmware: fix mirror hashDENG Qingfang2020-05-081-1/+1
| | | | | | | | | | Fix PKG_MIRROR_HASH hash mismatch. Fixes: 641a93f0f226 ("ath10k-firmware: update wave 1 firmware to 10.2.4-1.0-00047") Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> [added missing commit description] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 2d758129ca000620ab07f78e774464a96e8f212d)
* opkg: update to latest Git HEADJo-Philipp Wich2020-05-071-3/+3
| | | | | | | | | | | | f2166a8 libopkg: implement lightweight package listing logic cf4554d libopkg: support passing callbacks to feed parsing functions 2a0210f opkg-cl: don't read feeds on opkg update b6f1967 libopkg: use xsystem() to spawn opkg-key 60b9af2 file_util.c: refactor and fix checksum_hex2bin() 206ebae file_util.c: fix possible bad memory access in file_read_line_alloc() Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 79da9d78b98e1cd4574a37e2c4c5f8315b91563d)
* wireguard: bump to 1.0.20200506Jason A. Donenfeld2020-05-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * compat: timeconst.h is a generated artifact Before we were trying to check for timeconst.h by looking in the kernel source directory. This isn't quite correct on configurations in which the object directory is separate from the kernel source directory, for example when using O="elsewhere" as a make option when building the kernel. The correct fix is to use $(CURDIR), which should point to where we want. * compat: use bash instead of bc for HZ-->USEC calculation This should make packaging somewhat easier, as bash is generally already available (at least for dkms), whereas bc isn't provided by distros by default in their build meta packages. * socket: remove errant restriction on looping to self It's already possible to create two different interfaces and loop packets between them. This has always been possible with tunnels in the kernel, and isn't specific to wireguard. Therefore, the networking stack already needs to deal with that. At the very least, the packet winds up exceeding the MTU and is discarded at that point. So, since this is already something that happens, there's no need to forbid the not very exceptional case of routing a packet back to the same interface; this loop is no different than others, and we shouldn't special case it, but rather rely on generic handling of loops in general. This also makes it easier to do interesting things with wireguard such as onion routing. At the same time, we add a selftest for this, ensuring that both onion routing works and infinite routing loops do not crash the kernel. We also add a test case for wireguard interfaces nesting packets and sending traffic between each other, as well as the loop in this case too. We make sure to send some throughput-heavy traffic for this use case, to stress out any possible recursion issues with the locks around workqueues. * send: cond_resched() when processing tx ringbuffers Users with pathological hardware reported CPU stalls on CONFIG_ PREEMPT_VOLUNTARY=y, because the ringbuffers would stay full, meaning these workers would never terminate. That turned out not to be okay on systems without forced preemption. This commit adds a cond_resched() to the bottom of each loop iteration, so that these workers don't hog the core. We don't do this on encryption/decryption because the compat module here uses simd_relax, which already includes a call to schedule in preempt_enable. * selftests: initalize ipv6 members to NULL to squelch clang warning This fixes a worthless warning from clang. * send/receive: use explicit unlikely branch instead of implicit coalescing Some code readibility cleanups. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> (cherry picked from commit 4f6343ffe7fe8f7018f904b153dea9fc6038daf4)
* wireguard: bump to 20191226Jason A. Donenfeld2020-05-074-34/+61
| | | | | | | | | | | | | | | | | As announced on the mailing list, WireGuard will be in Linux 5.6. As a result, the wg(8) tool, used by OpenWRT in the same manner as ip(8), is moving to its own wireguard-tools repo. Meanwhile, the out-of-tree kernel module for kernels 3.10 - 5.5 moved to its own wireguard-linux- compat repo. Yesterday, releases were cut out of these repos, so this commit bumps packages to match. Since wg(8) and the compat kernel module are versioned and released separately, we create a wireguard-tools Makefile to contain the source for the new tools repo. Later, when OpenWRT moves permanently to Linux 5.6, we'll drop the original module package, leaving only the tools. So this commit shuffles the build definition around a bit but is basically the same idea as before. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> (cherry picked from commit ea980fb9c6de24350976dcc6c20da2bed5fc8cb8)
* odhcpd: fix PKG_SOURCE_DATEHans Dedecker2020-05-071-1/+1
| | | | | | Fixes: 5e8b50da15 (odhcpd : fix lan host reachibility due to identical RIO and PIO prefixes (FS#3056)) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcpd: fix lan host reachibility due to identical RIO and PIO prefixes ↵Hans Dedecker2020-05-061-3/+3
| | | | | | | | (FS#3056) 49e4949 router: fix Lan host reachibility due to identical RIO and PIO prefixes (FS#3056) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ustream-ssl: update to 19.07 Git HEADJo-Philipp Wich2020-05-061-4/+4
| | | | | | | | 40b563b ustream-openssl: clear error stack before SSL_read/SSL_write 30cebb4 ustream-ssl: mbedtls: fix ssl client verification 77de09f ustream-ssl: mbedtls: fix net_sockets.h include warning Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uhttpd: update to 19.07 Git HEADJo-Philipp Wich2020-05-061-3/+3
| | | | | | | 975dce2 client: allow keep-alive for POST requests d062f85 file: poke ustream after starting deferred program Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* fstools: update to the latest versionRafał Miłecki2020-05-061-3/+3
| | | | | | | | | | eec16e2 blockd: add optional "device" parameter to "info" ubus method 9ab936d block(d): always call hotplug.d "mount" scripts from blockd 4963db4 blockd: use uloop_process for calling /sbin/hotplug-call mount cddd902 Truncate FAT filesystem label until 1st occurance of a blank (0x20) Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit c3a43753b984657d1b65c666f776856cdf3af61d)
* generic: ar8216: fix unknown packet flooding for ar8229/ar8236Chuanhong Guo2020-05-062-7/+16
| | | | | | | | | | | | | ar8229 and ar8236 don't allow unknown unicast/multicast frames and broadcast frames to be flooded to cpu port. This isn't desired behavior for swconfig as we treat it as a standalone switch. Current code doesn't enable unicast frame flooding for ar8229 and uses wrong setup for ar8236. This commit fixes both of them by enabling port 0 flooding for all unknown frames. Fixes: FS#2848 Signed-off-by: Chuanhong Guo <gch981213@gmail.com> (cherry picked from commit 47f17b066259589b4a7b4181522321abf0660e18)
* libpcap: fix library packaging issuesJo-Philipp Wich2020-05-061-1/+5
| | | | | | | | | | | | | Workaround a bug in patches/100-debian_shared_lib.patch - it attemptss to extract the library major version from debian/changelog which does not exist in the vanilla upstream tarball. Create a fake changelog file for now to satisfy the version extraction routine until we get around to properly augment the patch. Fixes: FS#2970 Fixes: 96ee7c8bfd ("libpcap: Update shared-lib patch from Debian to fix linking problems") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: bump 4.14 to 4.14.179Petr Štetiar2020-05-051-2/+2
| | | | | | | Runtime-tested on: qemu-x86-64 Compile-tested on: x86/64 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* fstools: update to the latest versionRafał Miłecki2020-05-051-3/+3
| | | | | | | | | | | 8b9e601 block: always use st_dev (device ID) of / when looking for root 37c9148 block: simplify check_extroot() a bit d70774d block: add some basic extroot documentation 32db27d Revert "block: support hierarchical mount/umount" 0b93429 Revert "block: mount_action: handle mount/umount deps" Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 9295ce70069fee39f2a6b5cf961d8514406a64a7)
* fstools: update to the latest versionFelix Fietkau2020-05-051-3/+3
| | | | | | | | | | | 84965b92f635 blockd: print symlink error code and string message 62c578c22f9d blockd: report "target" path as "mount" for autofs available mounts d1f1f2b38fa1 block: remove mount target file if it's a link 830441d790d6 blockd: remove symlink linkpath file if it's a dir or link c80f7002114f libfstools/mtd: attempt to read from OOB data if empty space is found Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit b7d6e80feea21aac80d5bd25dc3a0dd5b148fec9)
* mac80211: Update to version 4.19.120Hauke Mehrtens2020-05-0517-63/+63
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* scripts/download: add sources CDN as first mirrorPaul Spooren2020-05-051-0/+1
| | | | | | | | | | | | | | | | | | OpenWrt now has a CDN for sources at sources.cdn.openwrt.org which mirrors sources.openwrt.org. Downloading sources outside Europe or US (mainland) could result in low throughput, extremely slowing down the first compilation of the build system. This patch adds sources.cdn.openwrt.org as the first mirror to offer worldwide fast download speeds by default. If the CDN goes down for whatever reason, the script jumps to the next available mirror and downloads requested files as before (in regional varying speed). Signed-off-by: Paul Spooren <mail@aparcar.org> Acked-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit c737a9ee6a9c47b6e553ac81bf293b1161e59799)
* upgs: Remove extra _DEFAULT_SOURCE definitionHauke Mehrtens2020-05-051-4/+0
| | | | | | | | | | | | | | | | This extra _DEFAULT_SOURCE definition results in a double definition which is a compile error. This fixes the following compile error with glibc: ---------------------------------------------------------------------- ugps-2019-06-25-cd7eabcd/nmea.c:19: error: "_DEFAULT_SOURCE" redefined [-Werror] #define _DEFAULT_SOURCE <command-line>: note: this is the location of the previous definition cc1: all warnings being treated as errors Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 70a962ca6f13e82d8d67f5c8ee65064a41f66a9c)
* dante: Fix compile with glibcHauke Mehrtens2020-05-052-1/+54
| | | | | | | | | | | | | | | | | | | | When compiled with glibc the config_scan.c wants to use the cpupolicy2numeric() function which is only available when HAVE_SCHED_SETSCHEDULER is set. It looks like the wrong define was used here. This fixes a build problem with glibc in combination with the force ac_cv_func_sched_setscheduler=no in the OpenWrt CONFIGURE_VARS. This fixes the following compile error with glibc: ---------------------------------------------------------------------- /bin/ld: config_scan.o: in function `socks_yylex': dante-1.4.1/sockd/config_scan.l:461: undefined reference to `cpupolicy2numeric' collect2: error: ld returned 1 exit status make[5]: *** [Makefile:522: sockd] Error 1 Fixes: aaf46a8fe23e ("dante: disable sched_getscheduler() - not implemented in musl") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit ce1798e915181e6c1f3ba735b254b37b84261303)
* perf: build with NO_LIBCAP=1Yangbo Lu2020-05-051-0/+1
| | | | | | | | | | Build with NO_LIBCAP=1. This is to resolve build issue. Package perf is missing dependencies for the following libraries: libcap.so.2 Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> (cherry picked from commit 80f128d2aa7586ce068bbc24badc46ffab2edd4a)
* mac80211: ath10k: increase rx buffer size to 2048Linus Lüssing2020-05-051-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | Before, only frames with a maximum size of 1528 bytes could be transmitted between two 802.11s nodes. For batman-adv for instance, which adds its own header to each frame, we typically need an MTU of at least 1532 bytes to be able to transmit without fragmentation. This patch now increases the maxmimum frame size from 1528 to 1656 bytes. Tested with two ath10k devices in 802.11s mode, as well as with batman-adv on top of 802.11s with forwarding disabled. Fix originally found and developed by Ben Greear. Link: https://github.com/greearb/ath10k-ct/issues/89 Link: https://github.com/greearb/ath10k-ct/commit/9e5ab25027e0971fa24ccf93373324c08c4e992d Cc: Ben Greear <greearb@candelatech.com> Signed-off-by: Linus Lüssing <ll@simonwunderlich.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> (cherry picked from commit 066ec97167e49b5c037b04dc4ec76c4cad5b75e2)
* kernel: backport fix for non-regular inodes on f2fsMatt Merhar2020-05-041-0/+69
| | | | | | | | | | | | | | | | Upstream commit dda9f4b9ca ("f2fs: fix to skip verifying block address for non-regular inode"). On 4.14, attempting to perform operations on a non-regular inode residing on an f2fs filesystem, such rm-ing a device node, would fail and lead to a warning / call trace in dmesg. This fix was already applied to other kernels upstream - including 4.19, from which the patch was taken. More info at https://bugzilla.kernel.org/show_bug.cgi?id=202495. Signed-off-by: Matt Merhar <mattmerhar@protonmail.com> (cherry picked from commit ee500186a5617dfe80f4b762fd6bd0c38af93d49)
* ath79: indicate boot/failsafe/upgrade for NanoBeam/Nanostation ACAdrian Schmutzler2020-05-042-2/+14
| | | | | | | | | Like for Ubiquiti PowerBeam 5AC Gen2, the highest RSSI LED can be exploited to indicate boot/failsafe/upgrade for the NanoBeam AC and Nanostation AC as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 80a094aaf3247059846e7d857c236b4fa9e497c7)
* ath79: add SUPPORTED_DEVICES based on ar71xx for some devicesAdrian Schmutzler2020-05-042-0/+13
| | | | | | | | | | This adds some still-missing board names for old TP-Link devices to ath79 SUPPORTED_DEVICES. Fixes: FS#3017 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 522f6b7eee479768dd7851e83c4530c3329b9f53)
* kernel: bump 4.14 to 4.14.178Petr Štetiar2020-05-0422-198/+65
| | | | | | | | | | | | | | Refreshed all patches and removed upstreamed: oxnas/001-irqchip-versatile-fpga-Handle-chained-IRQs-properly.patch oxnas/002-irqchip-versatile-fpga-Apply-clear-mask-earlier.patch Fixes: CVE-2020-12114 and CVE-2020-11669 Runtime-tested on: qemu-x86-64 Compile-tested on: ath79/generic, x86/64, imx6 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* wpad-wolfssl: fix crypto_bignum_sub()Antonio Quartulli2020-05-011-0/+26
| | | | | | | | | | | | | | | Backport patch from hostapd.git master that fixes copy/paste error in crypto_bignum_sub() in crypto_wolfssl.c. This missing fix was discovered while testing SAE over a mesh interface. With this fix applied and wolfssl >3.14.4 mesh+SAE works fine with wpad-mesh-wolfssl. Cc: Sean Parkinson <sean@wolfssl.com> Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 4b3b8ec81cd1965d0bd548fa31db491295b83354)
* mac80211: backport fix for an no-ack tx status issueFelix Fietkau2020-05-012-1/+83
| | | | | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> Tested-by: Jérôme Benoit <jerome.benoit@piment-noir.org> [WRT1900AC v1] [added missing package version bump] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit e0ab33ea496f371a0683b18d5555d651f8df1f5e)
* hostapd: unconditionally enable ap/mesh for wpa-cliFelix Fietkau2020-05-012-2/+8
| | | | | | | | | | | Without this change, wpa-cli features depend on which wpad build variant was used to build the wpa-cli package Signed-off-by: Felix Fietkau <nbd@nbd.name> Tested-by: Jérôme Benoit <jerome.benoit@piment-noir.org> [WRT1900AC v1] [added missing package version bump] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 03e9e4ba9ea8f00ff7c6f076f2cdc322e18cd3a4)
* wireless-regdb: backport three upstream fixesPetr Štetiar2020-05-014-0/+935
| | | | | | | | | Another release is overdue for quite some time, so I'm backporting three fixes from upstream which I plan to backport into 19.07 as well. Ref: FS#2880 Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 76a0ddf1308782a4da2693978955aee9cf631862)
* curl: backport fix for CVE-2019-15601Petr Štetiar2020-05-012-1/+45
| | | | | | | | | | On Windows, refuse paths that start with \\ ... as that might cause an unexpected SMB connection to a given host name. Ref: PR#2730 Ref: https://curl.haxx.se/docs/CVE-2019-15601.html Suggested-by: Jerome Benoit <jerome.benoit@sap.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-kirkwood: fix ethernet and usbPawel Dembicki2020-05-012-1/+39
| | | | | | | | | | | | | | | | | Before 2019.01 version was introduced patch, which changes cache routines: 93b283d4 ("ARM: CPU: arm926ejs: Consolidate cache routines to common file"). Unfortunately that patch make ethernet and usb in kirkwood broken. This patch backport commit 599f7aa5 ("ARM: kirkwood: disable dcache for Kirkwood boards"), which are fix for that problem. Fixes: dc08514e6d ("uboot-kirkwood: update to 2019.01") Run tested: pogoplugv4 Tested-by: Cezary Jackiewicz <cezary@eko.one.pl> [nsa310] Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ramips: remove memory node for ZBT MT7621 devicesChuanhong Guo2020-04-283-15/+0
| | | | | | | | | | It's known that ZBT sells 256M variants of these routers. As a result, our images won't be able to boot on these routers. This commit removes memory node for them. With previously backported memory detection patch, kernel is able to detect memory size itself. Fixes: FS#3053 Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: remove unnecessary DEVICE_PACKAGES for Belkin F7C027Sungbo Eo2020-04-271-1/+0
| | | | | | | | kmod-usb-dwc2 and kmod-usb-ledtrig-usbport are not target default packages, and Belkin F7C027 does not have a USB port anyway. Just drop it. Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit 1dedad2a00d8519d4892b8529b5f2fffcb768220)
* oxnas: move service file to correct placeSungbo Eo2020-04-271-0/+0
| | | | | | | | This service file has been misplaced from the very beginning. Fixes: dcc34574efba ("oxnas: bring in new oxnas target") Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit 01961f163d927d6b44097f48a67bbc5b4c63eaf7)
* relayd: bump to version 2020-04-25Kevin Darbyshire-Bryant2020-04-271-3/+3
| | | | | | | | | f4d759b dhcp.c: further improve validation Further improve input validation for CVE-2020-11752 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 9e7d11f3e275d6f5d6b3edd7f0fa0440da43c45a)
* umdns: update to version 2020-04-25Kevin Darbyshire-Bryant2020-04-271-3/+3
| | | | | | | | | | | | cdac046 dns.c: fix input validation fix Due to a slight foobar typo, failing to de-reference a pointer, previous fix not quite as complete as it should have been. Improve CVE-2020-11750 fix Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 9f7c8ed0786be97eda879e5f6681994e4de53d74)
* dnsmasq: fix dnssec+ntp chicken-and-egg workaround (FS#2574)Henrique de Moraes Holschuh2020-04-252-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | Fix the test for an enabled sysntp initscript in dnsmasq.init, and get rid of "test -o" while at it. Issue reproduced on openwrt-19.07 with the help of pool.ntp.br and an RTC-less ath79 router. dnssec-no-timecheck would be clearly missing from /var/etc/dnsmasq.conf.* while the router was still a few days in the past due to non-working DNSSEC + DNS-based NTP server config. The fix was tested with the router in the "DNSSEC broken state": it properly started dnsmasq in dnssec-no-timecheck mode, and eventually ntp was able to resolve the server name to an IP address, and set the system time. DNSSEC was then enabled by SIGINT through the ntp hotplug hook, as expected. A missing system.ntp.enabled UCI node is required for the bug to show up. The reasons for why it would be missing in the first place were not investigated. Signed-off-by: Henrique de Moraes Holschuh <henrique@nic.br> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase] (cherry picked from commit 556b8581a15c855b2de0efbea6b625ab16cc9daf)
* libpcap: fix build breakage with very high number of simultaneous jobsPetr Štetiar2020-04-251-1/+1
| | | | | | | | | | | | | | | | | | | | | Building libpcap with high number (64) of simultaneous jobs fails: In file included from ./fmtutils.c:42:0: ./ftmacros.h:106:0: warning: "_BSD_SOURCE" redefined #define _BSD_SOURCE <command-line>:0:0: note: this is the location of the previous definition ./gencode.c:67:10: fatal error: grammar.h: No such file or directory #include "grammar.h" ^~~~~~~~~~~ compilation terminated. Makefile:99: recipe for target 'gencode_pic.o' failed So fix this by less intrusive way by disabling the parallel builds for this package. Ref: FS#3010 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* openssl: bump to 1.1.1gPetr Štetiar2020-04-211-2/+2
| | | | | | | | | Fixes NULL dereference in SSL_check_chain() for TLS 1.3, marked with high severity, assigned CVE-2020-1967. Ref: https://www.openssl.org/news/secadv/20200421.txt Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 3773ae127ac83766028f767ac744e87a7ddcaf50)
* relayd: bump to version 2020-04-20Kevin Darbyshire-Bryant2020-04-201-3/+3
| | | | | | | | | 796da66 dhcp.c: improve input validation & length checks Addresses CVE-2020-11752 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit be172e663f318ec364c13f795df025bbcce9ac18)
* umdns: update to version 2020-04-20Kevin Darbyshire-Bryant2020-04-201-4/+4
| | | | | | | | | e74a3f9 dns.c: improve input validation Addresses CVE-2020-11750 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 533da61ac63079f218a9946cd8e347b880c33dc0)
* umdns: update to the version 2020-04-05Kevin Darbyshire-Bryant2020-04-201-4/+4
| | | | | | | | | ab7a39a umdns: fix unused error 45c4953 dns: explicitly endian-convert all fields in header and question Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 22ae8bd50ef6d056b25a96ce6c77de0b0d53c1a1) (cherry picked from commit 17c4593e63f5847868f2c38185275199d37d379a)
* umdns: suppress address-of-packed-member warningKevin Darbyshire-Bryant2020-04-201-2/+2
| | | | | | | | | | | | | | | | | | | gcc 8 & 9 appear to be more picky with regards access alignment to packed structures, leading to this warning in dns.c: dns.c:261:2: error: converting a packed ‘struct dns_question’ pointer (alignment 1) to a ‘uint16_t’ {aka ‘short unsigned int’} pointer (alignment 2) may result in an unaligned pointer value [-Werror=address-of-packed-member] 261 | uint16_t *swap = (uint16_t *) q; Work around what I think is a false positive by turning the warning off. Not ideal, but not quite as not ideal as build failure. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 02640f014719a994e2e538b2cb6376a189cd39de) (cherry picked from commit a10b6ec1c8cd6d14a3b76a2ec3d81442b85f7321)
* binutils: add ALTERNATIVES for strings (FS#3001)Hans Dedecker2020-04-181-1/+2
| | | | | | | | | Don't move strings anymore to /bin/strings to avoid clash with busybox /usr/bin/strings but move it to /usr/bin/binutils-strings. Use ALTERNATIVES support to install it as /usr/bin/strings Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (cherry picked from commit 5f126c541a743e2ff5d8f406128d477ab5a509b4)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 09:38:24 +0000