aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: correct WizFi630S pin mappingsTobias Welz2020-08-081-27/+8
| | | | | | | | | | | | WizFi630S had some pins changed in the release version of the board. The run led, wps button and a slide switch where affected. This patch is correcting this. i2c is removed as it is sharing a pin with the run (system) led. uart2 is enabled as it is also enabled in the OEM firmware. Signed-off-by: Tobias Welz <tw@wiznet.eu> (backported from commit d0b229f553a814b22c16976e40a197f892c0c0df) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: enable flashing WizFi630S via OEM firmwareTobias Welz2020-08-081-0/+1
| | | | | | | | | | | | WIZnet WizFi630s board name is written slightly different it its OEM OpenWrt firmware. This causes an incompatibility warning during flashing with sysupgrade. This patch is adding the vendor board name to the supported devices list to avoid this warning. For initial flashing you can use sysupgrade via command line or luci beside of TFTP. Do not keep the OEM configuration during sysupgrade. Signed-off-by: Tobias Welz <tw@wiznet.eu> (cherry picked from commit 816973f42aa47d910d3e35c2f8f8eb9d67416396)
* ramips: remove doublet entry in WizFi630S dts fileTobias Welz2020-08-081-4/+0
| | | | | | | | &wmac entry in WIZnet WizFi630S dts file was existing two times. This is removing one of them. Signed-off-by: Tobias Welz <tw@wiznet.eu> (cherry picked from commit b735bbcb1876196f33f044ed07325f8959a8967f)
* ramips: disable unused phy ports of WizFi630STobias Welz2020-08-081-0/+1
| | | | | | | | WIZnet WizFi630S is using only 3 of the phy ports. The unused phy ports draw unnecessarily power. This is disabling the unused phy ports. Signed-off-by: Tobias Welz <tw@wiznet.eu> (cherry picked from commit 36d4c2272ec65490232e70d45b945b9f467b78f0)
* mvebu: fix LAN/WAN port assignment on ClearFog Base/ProJosua Mayer2020-08-071-6/+6
| | | | | | | | | | | | | | | | | The comments in code already describe the intended lan / wan assignment: lan: switch wan: standalone ethernet and sfp Update the interface handles to match the comments, as observed with OpenWRT-19.07-rc2 on a Clearfog Pro Rev 2.0. This also matches the effective assignment on master, while the actual interface names (ethX) are different due to the reassignment in 06_set_iface_mac, which is included in 19.07 but was dropped for master. Signed-off-by: Josua Mayer <josua.mayer@jm0.eu> [extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ar71xx: restore support for boot console with arbitrary baud ratesSungbo Eo2020-08-021-0/+54
| | | | | | | | | | | | Commit 1bfbf2de6df9 ("ar71xx: serial: core: add support for boot console with arbitrary baud rates") added support for arbitrary baud rates which enabled 250000 baud rate for Yun. But the patch was not ported to kernel 4.9, and since then the kernel set its baud rate to 9600. This commit ports the patch to kernel 4.14, thereby restoring the serial console of Yun. Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit c90db26e051e4f0e7cd32333b3bd8c94a13d599a)
* ath79: restore support for boot console with arbitrary baud ratesAdrian Schmutzler2020-08-021-0/+54
| | | | | | | | | | | | | | | The Arduino Yun uses a baud rate of 250000 by default. The serial is going over the Atmel ATmega and is used to connect to this chip. Without this patch Linux wants to switch the console to 9600 Baud. With this patch Linux will use the configured baud rate and not a default one specified in uart_register_driver(). This has been added for ath79 4.19 and 5.4 in master as part of fc59b2f79b50 ("ath79: add support for Arduino Yun"), this backports it separately to 4.14. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ar71xx: enable ethernet LED of Arduino YunSungbo Eo2020-08-021-2/+1
| | | | | | | | | Commit 05d73a2a7379 enabled GPIO on ethernet LED, but proper LED setup was not added then. This commit fixes it by reverting the change on the LED. Fixes: 05d73a2a7379 ("ar71xx: Arduino Yun board 'WLAN RST' button support") Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit a5e404d1923d135d335e4ece83f87e6e891396e2)
* ar71xx: fix sysupgrade for Arduino YunSungbo Eo2020-08-021-1/+1
| | | | | | | | | | Commit bb46b635df48 changed its partition scheme, but sysupgrade image validation still uses the old format. This commit fixes it so that force flag is not needed for sysupgrade. Fixes: bb46b635df48 ("ar71xx: move Arduino Yun to generic building code") Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit 58dc1d0637425cfe023192466e6212009332b677)
* Revert "ar71xx: fix Arduino Yun enabling of level shifters outputs"Sungbo Eo2020-08-021-2/+2
| | | | | | | | | | This reverts commit 077253dd666a30ae5231c3748222d4b5b138593d. The output enable pins should be disabled by default, and only enabled when used. Otherwise unwanted conflicts might occur between MCU and SoC pins. Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit 43896dc0b005adfb512c027a27781c971440d415)
* ramips: add kmod-usb-dwc2 to ZyXEL Keenetic imageAlexey Dobrovolsky2020-08-021-1/+2
| | | | | | | | | | | | ZyXEL Keenetic has a USB port. Thus, DWC2 USB controller driver should be in the default image for this device. Fixes: a7cbf59e0e04 ("ramips: add new device ZyXEL Keenetic as kn") Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com> [fixed whitespace issue] Signed-off-by: Petr Štetiar <ynezz@true.cz> (backported from commit 0a182fcba6d9cb2cf74cae9114ea4770ef928f75) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: remove patches for USB-dwc2Alexey Dobrovolsky2020-08-021-29/+0
| | | | | | | | | | | | | | | In FS#2738 we can see that patch first introduced in e8ebcff ("ramips: add a explicit reset to dwc2") breaks USB functionality since 18.06. Thus, this patch should be removed. Removed: - 0032-USB-dwc2-add-device_reset.patch Fixes: FS#2738 Fixes: FS#2964 Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com> (cherry picked from commit ab841b4393a4077a5819da1da040ab9a89e3b69d)
* hostapd: improve TITLE for packagesAdrian Schmutzler2020-07-301-25/+33
| | | | | | | | | | | | | | | For a few packages, the current TITLE is too long, so it is not displayed at all when running make menuconfig. Despite, there is no indication of OpenSSL vs. wolfSSL in the titles. Thus, this patch adjusts titles to be generally shorter, and adds the SSL variant to it. While at it, make things easier by creating a shared definition for eapol-test like it's done already for all the other flavors. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 917980fd8a6589d6911797211f1871016f527f8c)
* mediatek: mt7623: fix sysupgrade from vendor OpenWrt on UniElec U7623David Woodhouse2020-07-303-6/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board ships with an ancient 14.07-based OpenWrt using block2mtd, and the MBR partition table contains nonsense. It is possible to sysupgrade to an upstream OpenWrt image, but the legacy layout of the OpenWrt images start at 0xA00 in the eMMC, with a raw uImage. The legacy OpenWrt image doesn't "own" the beginning of the device, including the MBR and U-Boot. This means that when a user upgrades to upstream OpenWrt, it doesn't boot because it can't find the right partitions. So hard-code them on the kernel's command line using CONFIG_CMDLINE_PARTITION (for block). Additionally, the vendor firmware doesn't cope with images larger than about 36MiB, because it only overwrites the contents of its "firmware" MTD partition. The current layout of the legacy image wastes a lot of space, allowing over 32MiB for the kernel and another 10MiB for the FAT recovery file system which is only created as 3MiB. So pull those in to allow 4¾ MiB for the kernel, 3MiB for recovery, and then we have over 20MiB for the root file system. This doesn't affect the new images which ship with a full eMMC image including a different MBR layout and a partition for U-Boot, because our modern U-Boot can actually pass the command line to the kernel, and the built-in one doesn't get used anyway. Tested by upgrading from vendor OpenWrt to the current legacy image, from legacy to itself, to the previous legacy layout, and then to finally the full-system image. Signed-off-by: David Woodhouse <dwmw2@infradead.org> (cherry picked from commit 6eb63019afef89404899f2cb65fb4c16e00aa0ed)
* mediatek: mt7623: add explicit console= to U7623 kernelDavid Woodhouse2020-07-301-1/+1
| | | | | | | | The bootloader for legacy builds can't set it, so we end up unable to log in on the serial port. Signed-off-by: David Woodhouse <dwmw2@infradead.org> (cherry picked from commit ea9ef8c9451a08aa4dbb6efcbe5f20d9b788ebd2)
* curl: patch CVE-2020-8169Jan Pavlinec2020-07-292-1/+39
| | | | | | | | | | | Affected versions: curl 7.62.0 to and including 7.70.0 https://curl.haxx.se/docs/CVE-2020-8169.html Run tested on Omnia with OpenWrt 19.07 Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz> [added missing commit description] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* make_ext4fs: Update to version 2020-01-05Hauke Mehrtens2020-07-292-14/+3
| | | | | | | | 5c201be Add LDFLAGS when building libsparse.a ec17045 make_ext4fs: fix build on musl systems Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 271d0c825ba5821160e4a516497796fa342c2eff)
* make-ext4fs: update to HEAD of 2017-05-29 - eebda1Christian Lamparter2020-07-291-3/+3
| | | | | | | | | | | | | | Update make-ext4fs to commit eebda1d55d9701ace2700d7ae461697fadf52d1f git log --pretty=oneline --abbrev-commit 484903e4..eebda1d5 eebda1d make_ext4: Add strict prototypes. bb9cf91 make_ext4fs: Remove off64_t in favor of standard off_t Created with the help of the make-package-update-commit.sh script. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit ac2f341036c18acee2b4f69e819cffeaacc2e824)
* firewall: backport patch for mss clamping in both directionsYousong Zhou2020-07-262-1/+34
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ath79: correctly define WiFi switch for TL-WR841ND v8Adrian Schmutzler2020-07-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | The TL-WR841ND v8 feature a WiFi switch instead of a button. This adds the corresponding input-type to prevent booting into failsafe regularly. This has been defined correctly in ar71xx, but was overlooked when migrating to ath79. In contrast, the TL-WR842ND v2, which has the key set up as switch in ar71xx, actually has a button. The TL-MR3420 v2 has a button as well and is set up correctly for both targets. (Information based on TP-Link user guide) Note: While looking into this, I found that support PR for TL-MR3420 v2 switched reset button to ACTIVE_HIGH. However, the other two device still use ACTIVE_LOW. This seems strange, but I cannot verify it lacking the affected devices. Fixes: FS#2733 Fixes: 9601d94138de ("add support for TP-Link TL-WR841N/ND v8") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (backported from commit 5e86877f36b0d95127dcef8ed3abf78ecd78061d)
* bcm47xx: fix switch setup for Linksys WRT610N v2Adrian Schmutzler2020-07-231-0/+1
| | | | | | | | | | | | | WRT610N V2 is not detected by the initial network configuration script. The switch remains unconfigured and wlan/lan vlans are not created. This adds the correct setup for the device. Fixes: FS#1869 Suggested-by: Alessandro Radicati Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit a2fee73e270305c4cb086055cc30e97f65e6f58b)
* tplink-safeloader: expand support list for TP-Link CPE210 v3Adrian Schmutzler2020-07-231-1/+8
| | | | | | | | | | | | | | | This adds new strings to the support list for the TP-Link CPE210 v3 that are supposed to work with the existing setup. Without it, the factory image won't be accepted by the vendor UI on these newer revisions. Tested on a CPE210 v3.20 (EU). Ref: https://forum.openwrt.org/t/build-for-cpe210-v3-20/68000 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 4a2380a1e778a8f8e0bfb0a00f2996ed0aab58d8)
* lantiq/xrx200: make WLAN button responsive on Fritzbox 7360 & 7362Dustin Gathmann2020-07-231-1/+1
| | | | | | | | | | | | | | Pressing the 'WLAN' button should enable/disable wireless activity. Currently, the button is mapped to the KEY_WLAN, which will not have this effect. This patch changes the mapping of the WLAN button, so a button press will emit an action for the 'rfkill' key instead of 'wlan'. Apparently, this is what stock OpenWRT expects. This fix is analogous to the preceding patch for Fritzbox 3370. Signed-off-by: Dustin Gathmann <dzsoftware@posteo.org> (cherry picked from commit d5a148f5c8f6d6dee7041fd348bd0f52839d0f4e)
* lantiq/xrx200: fix WLAN button actions for Fritzbox 3370Dustin Gathmann2020-07-231-1/+1
| | | | | | | | | | | | | The WLAN button actions are reversed, i.e. pressing the button emits a 'released' action, and vice versa. This can easily be checked by adding logger -t button_action "$BUTTON $ACTION" as the second line of /etc/rc.button/rfkill, and using logread to read the events (assuming the preceding patch has been applied). Defining the GPIO as ACTIVE_LOW corrects this behavior. Signed-off-by: Dustin Gathmann <dzsoftware@posteo.org> (cherry picked from commit 0ee30adb46a87583badd85b69e4ccd7942786374)
* lantiq/xrx200: make WLAN button responsive on Fritzbox 3370Dustin Gathmann2020-07-231-1/+1
| | | | | | | | | | | | Pressing the 'WLAN' button should enable/disable wireless activity. However, on the Fritzbox 3370 this doesn't have an effect. This patch changes the mapping of the physical WLAN button, so a button press will emit an action for the 'rfkill' key instead of 'wlan'. Apparently, this is what stock OpenWRT expects, and also what is implemented for most other devices. Signed-off-by: Dustin Gathmann <dzsoftware@posteo.org> (cherry picked from commit a53bf63756ef2a266ae5f3b3507eeb7382b4cdc9)
* vxlan: bump and change to PKG_RELEASEAdrian Schmutzler2020-07-171-1/+1
| | | | | | | | | | | | | | Bumping package version has been overlooked in a previous commit. While at it, use PKG_RELEASE instead of PKG_VERSION, as the latter is meant for upstream version number only. (The effective version string for the package would be "3" in both cases, so there is no harm done for version comparison.) Fixes: 0453c3866feb ("vxlan: fix udp checksum control") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit b29d620ed2521fe6fda40ddafe6cb0f1d70e4503)
* vxlan: fix udp checksum controlJohannes Kimmel2020-07-171-0/+2
| | | | | | | | | | | | So far, passing "rxcsum" and "txcsum" had no effect. Fixes: 95ab18e0124e ("vxlan: add options to enable and disable UDP checksums") Signed-off-by: Johannes Kimmel <fff@bareminimum.eu> [add Fixes:] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 0453c3866feb701160bbab4ecf9762c5a3038503)
* ipq40xx: fix ethernet vlan double taggingJohn Crispin2020-07-141-0/+193
| | | | | | | | | | | As the the SoC uses implicit vlan tagging for dual MAC support, the offload feature breaks when using double tagging. This is backport of 9da2b567605b0964d921b9ca4f0c9886db4f636d from trunk. As the layout of the files has changed a cherry-pick was not possible. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: John Crispin <john@phrozen.org>
* build,json: fix compatibility with Python 3.5Paul Spooren2020-07-131-1/+1
| | | | | | | | The f-string feature was introduced in Python 3.6. As Buildbots may run on Debian 9, which comes per default with Python 3.5, this would cause an issue. Instead of f-strings use the *legacy* `.format()` function. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: fix compatibility with python 3.6Huangbin Zhan2020-07-131-3/+4
| | | | | | | | | On a system python3 is linked to python3.6, fail to perform json_overview_image_info and got `TypeError: __init__() got an unexpected keyword argument 'capture_output'`. This patch emulate the behaviour on python 3.7+. Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com> (cherry picked from commit 3caad5150c2011a7dac462acaa06d0e69f8ed005)
* build,json: fix build failure in case no data is foundDaniel Golle2020-07-131-18/+16
| | | | | | | | | Only collect arch_packages if actually generating any output. Fixes: commit f09b9319 ("build,json: store arch_packages in profiles.json"( Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 3b0f698760ae3a62173a28f18e9e1e3adef9c492)
* build,json: store arch_packages in profiles.jsonPaul Spooren2020-07-131-2/+5
| | | | | | | | | | The `arch_packages` contains the supported package architecture. Previously it was necessary to parse the `Packages` index for the line `Architecture:`, requiring both an additional parser and file download. Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit f09b9319c666e343763c7618878a503ad7eb7531)
* build: store default/device packages in JSONPaul Spooren2020-07-133-2/+20
| | | | | | | | | | | | | With this commit the `profiles.json` contain both the target specific `default_packages` as well as the device specific `device_packages` as a array of strings. This information is required for downstream projects like the various web-based interactive firmware generators. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 263f7e5bbd119ebed1f514c16f659a2e2a2b132c)
* imagebuilder: Remove json_info_files/ before buildPaul Spooren2020-07-131-0/+1
| | | | | | | | | | | | | | | The folder `json_info_files` contains multiple JSON files which describe created firmware images. The folder is not removed between builds as the ImageBuilder does not use `image.mk`. Not removing the JSON files result in a merged `profiles.json` file containing entries for outdated or non-existing images. This commit adds the `json_info_files/` cleanup step to the ImageBuilder Makefile. Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 941ec28b355ea690b5682d2bf8175aa513379997)
* kirkwood: support for button in Pogoplug V4Sungbo Eo2020-07-101-1/+1
| | | | | | | | Pogoplug V4 has a reset button on a GPIO pin. To use it, kmod-gpio-button-hotplug package needs to be installed. Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit 91472dc2ce051d255eecb7fbba3484de917fa65d)
* lantiq: dts: Move the &usb_vbus nodes out of &gpioLuca Olivetti2020-07-104-48/+48
| | | | | | | | | | | | | | | | | | | | | | Move the USB VBUS regulator nodes out of the GPIO controller node. This fixes a problem where the "regulator-fixed" driver wasn't probed for these regulators because the GPIO driver doesn't scan the child-nodes and based on the dt-bindings documentation it's not supposed to. This fixed the following error reported by Luca Olivetti: ... dwc2 1e101000.usb: DWC OTG Controller dwc2 1e101000.usb: new USB bus registered, assigned bus number 1 dwc2 1e101000.usb: irq 62, io mem 0x1e101000 dwc2 1e101000.usb: startup error -517 dwc2 1e101000.usb: USB bus 1 deregistered dwc2 1e101000.usb: dwc2_hcd_init() FAILED, returning -517 Fixes: FS#1634 Cc: Luca Olivetti <luca@ventoso.org> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> [backported from 982468de35d499f85470b7b547d2b27cea53bae0] Signed-off-by: Luca Olivetti <luca@ventoso.org>
* ar71xx: Fix mikrotik NAND compile problemHauke Mehrtens2020-07-071-1/+1
| | | | | | | | | | | This fixes the following compile error: drivers/mtd/nand/rb91x_nand.c: In function 'rb91x_nand_remove': drivers/mtd/nand/rb91x_nand.c:445:16: error: 'rbni' undeclared (first use in this function) nand_release(&rbni->chip); Fixes: 9cad70044f75 ("kernel: fix nand_release() usage.") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 66e04abbb6d0dec8642be5deb2fca4bba470f8ac)
* ar71xx: Fix mikrotik NAND compile problemHauke Mehrtens2020-07-061-1/+1
| | | | | | | | There is one closing bracket too much. Fixes: 9cad70044f75 ("kernel: fix nand_release() usage.") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 014d3f593acea13ee6aa002d858f182806ed43f0)
* armvirt,x86: fix build breakage of crypto ccp modulePetr Štetiar2020-07-052-0/+2
| | | | | | | | | | | Upstream in commit f9f8f0c24203 ("crypto: ccp -- don't "select" CONFIG_DMADEVICES") removed dependency on CONFIG_DMADEVICES symbol which leads to build breakage of ccp crypto module, so fix this by adding that symbol back in the kernel config. Fixes: f4985a22ca1b ("kernel: Update kernel 4.14 to version 4.14.187") Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 472b8fc91bbab0530d72e9780a482bacc1bbe5f7)
* nghttp2: bump to 1.41.0Hans Dedecker2020-07-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 8f7b008b Update bash_completion 83086ba9 Update manual pages c3b46625 Merge pull request from GHSA-q5wr-xfw9-q7xr 3eecc2ca Bump version number to v1.41.0, LT revision to 34:0:20 881c060d Update AUTHORS f8da73bd Earlier check for settings flood 336a98fe Implement max settings option ef415836 Revert "Add missing connection error handling" 979e6c53 Merge pull request #1459 from nghttp2/proxyprotov2 b7d16101 Add missing connection error handling cd53bd81 Merge pull request #1460 from gportay/patch-1 e5625b8c Fix doc c663349f integration: Add PROXY protocol v2 tests 854e9fe3 nghttpx: Always call init_forwarded_for c60ea227 Update doc 49cd8e6e nghttpx: Add PROXY-protocol v2 support 3b17a659 Merge pull request #1453 from Leo-Neat/master 600fcdf5 Merge pull request #1455 from xjtian/long_serials 4922bb41 static_cast size parameter in StringRef constructor to size_t aad86975 Fix get_x509_serial for long serial numbers dc7a7df6 Adding CIFuzz b3f85e2d Merge pull request #1444 from nghttp2/fix-recv-window-flow-control-issue ffb49c6c Merge pull request #1435 from geoffhill/master 2ec58551 Fix receiving stream data stall 459df42b Merge pull request #1442 from nghttp2/upgrade-llhttp a4c1fed5 Bump llhttp to 2.0.4 866eadb5 Enable session_create_idle_stream test, fix errors 5e13274b Fix typo e0d7f7de h2load: Allow port in --connect-to df575f96 h2load: add --connect-to option 1fff7379 clang-format-9 b40c6c86 Merge pull request #1418 from vszakats/patch-1 9bc2c75e lib/CMakeLists.txt: Make hard-coded static lib suffix optional 2d5f7659 Bump up version number to 1.41.0-DEV Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> Note this is cherry-pick from master. It fixes CVE-2020-11080 and https://github.com/nxhack/openwrt-node-packages/issues/679 Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
* kernel: fix nand_release() usage.Hauke Mehrtens2020-07-047-13/+12
| | | | | | | | nand_release() takes nand_chip since commit 5bcfcbfc4019 ("mtd: rawnand: Pass a nand_chip object to nand_release()") Fixes: f4985a22ca1b ("kernel: Update kernel 4.14 to version 4.14.187") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* wireguard: bump to 1.0.20200611Stijn Segers2020-07-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This bump fixes breakage introduced by kernel commit 8ab8786f78c3fc930f9abf6d6d85e95567de4e1f, which is part of the 4.14.181 kernel bump, and backported ip6_dst_lookup_flow to 4.14. This breaks the older WireGuard version currently in 19.07. For reference, the compilation error is the one below: build_dir/target-x86_64_musl/linux-x86_64/wireguard-linux-compat-1.0.20200506/src/compat/compat.h:104:42: error: 'const struct ipv6_stub' has no member named 'ipv6_dst_lookup'; did you mean 'ipv6_dst_lookup_flow'? #define ipv6_dst_lookup_flow(a, b, c, d) ipv6_dst_lookup(a, b, &dst, c) + (void *)0 ?: dst Changelogs below taken from the official release announcements. == Changes since v1.0.20200506 == This release aligns with the changes I sent to DaveM for 5.7-rc7 and were pushed to net.git about 45 minutes ago. * qemu: use newer iproute2 for gcc-10 * qemu: add -fcommon for compiling ping with gcc-10 These enable the test suite to compile with gcc-10. * noise: read preshared key while taking lock Matt noticed a benign data race when porting the Linux code to OpenBSD. * queueing: preserve flow hash across packet scrubbing * noise: separate receive counter from send counter WireGuard now works with fq_codel, cake, and other qdiscs that make use of skb->hash. This should significantly improve latency spikes related to buffer bloat. Here's a before and after graph from some data Toke measured: https://data.zx2c4.com/removal-of-buffer-bloat-in-wireguard.png * compat: support RHEL 8 as 8.2, drop 8.1 support * compat: support CentOS 8 explicitly * compat: RHEL7 backported the skb hash renamings The usual RHEL churn. * compat: backport renamed/missing skb hash members The new support for fq_codel and friends meant more backporting work. * compat: ip6_dst_lookup_flow was backported to 4.14, 4.9, and 4.4 == Changes since v1.0.20200611 == * qemu: always use cbuild gcc rather than system gcc * qemu: remove -Werror in order to build ancient kernels better * qemu: patch kernels that rely on ancient make * qemu: force 2MB pages for binutils 2.31 * qemu: use cbuild gcc for avx512 exclusion * qemu: add extra fill in idt handler for newer binutils * qemu: support fetching kernels for arbitrary URLs * qemu: patch in UTS_UBUNTU_RELEASE_ABI for Ubuntu detection * qemu: work around broken centos8 kernel * qemu: mark per_cpu_load_addr as static for gcc-10 Our qemu test suite can now handle more kernels and more compilers. Scroll down to the bottom of https://www.wireguard.com/build-status/ to see the expanded array of kernels we now test against, including some distro kernels. * compat: widen breadth of integer constants * compat: widen breadth of memzero_explicit backport * compat: backport skb_scrub_packet to 3.11 * compat: widen breadth of prandom_u32_max backport * compat: narrow the breadth of iptunnel_xmit backport * compat: backport iptunnel_xmit to 3.11 With the expanded qemu test suite, it was possible to expand our list of mainline kernels, so the backport compat layer is now more precise. * compat: ubuntu appears to have backported ipv6_dst_lookup_flow * compat: bionic-hwe-5.0/disco kernel backported skb_reset_redirect and ipv6 flow Ubuntu kernels changed recently, so this ensures we can compile with the latest Ubuntu releases. * compat: remove stale suse support Signed-off-by: Stijn Segers <foss@volatilesystems.org> (cherry picked from commit 1fd1f5e8cff18f97675ce303b05d411136b99fb0)
* kernel: Update kernel 4.14 to version 4.14.187Hauke Mehrtens2020-07-0451-183/+105
| | | | | | | | | | Fixes: - CVE-2020-10757 Run tested: ath79, ipq40xx Build tested: ath79, ipq40xx Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: fix use of local variableLeon M. George2020-06-301-1/+1
| | | | | | | | | | | mac80211_get_addr is called from mac80211_generate_mac, where the local variable initialisation id="${macidx:-0}" suggests that macidx is not always defined. Probably, idx was supposed to be used instead of $(($macidx + 1)). Fixes: 4d99db168cf7 ("mac80211: try to get interface addresses from wiphy sysfs 'addresses' if no mask is set") Signed-off-by: Leon M. George <leon@georgemail.eu> (cherry picked from commit 8f95220bcb554b1b668114e5264ebce4028c5f93)
* scripts: JSON merge don't crash if no JSON foundPaul Spooren2020-06-301-2/+0
| | | | | | | | | | | | | | | | | | | The JSON `WORK_DIR` ($(KDIR)/json_info_files) is only created if the new image generation methods from `image.mk` are used. However some targets like `armvirt` do not use it yet, so the folder is never created. The `json_overview_image_info.py` script used to raise an error if the given `WORK_DIR` isn't a folder, however it should just notify about missing JSON files. This patch removes the Python assert and exists with code 0 even if no JSON files were found, as this is not necessarily an error but simply not yet implemented. Using `glob` on an not existing `Path` results in an empty list, therefore the for loop won't run. Signed-off-by: Paul Spooren <mail@aparcar.org> CC: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 14cbd8fb2dd8c81bad06d3c3bb45213685c19c98)
* build: refactor JSON info files to `profiles.json`Paul Spooren2020-06-306-54/+124
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | JSON info files contain machine readable information of built profiles and resulting images. These files were added in commit 881ed09ee6e2 ("build: create JSON files containing image info"). They are useful for firmware wizards and script checking for reproducibility. Currently all JSON files are stored next to the built images, resulting in up to 168 individual files for the ath79/generic target. This patch refactors the JSON creation to store individual per image (not per profile) files in $(BUILD_DIR)/json_info_files and create an single overview file called `profiles.json` in the target directory. Storing per image files and not per profile solves the problem of parallel file writes. If a profiles sysupgrade and factory image are finished at the same time both processes would write to the same JSON file, resulting in randomly broken outputs. Some target like x86/64 do not use the image code yet, resulting in missing JSON files. If no JSON info files were created, no `profiles.json` files is created as it would be empty anyway. As before, this creation is enabled by default only if `BUILDBOT` is set. Tested via buildroot & ImageBuilder on ath79/generic, imx6 and x86/64. Signed-off-by: Paul Spooren <mail@aparcar.org> [json_info_files dir handling in Make, if case refactoring] Signed-off-by: Petr Štetiar <ynezz@true.cz> (backported from commit 07449f692ce4c4525e946401f4c3ed0cbbc8c4df) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: image: fix build breakage of some imagesPetr Štetiar2020-06-301-0/+1
| | | | | | | | | | | | | | Commit 881ed09ee6e2 ("build: create JSON files containing image info") has removed the crucial empty new line from the image copy step resulting in the following errors during make function expansion: GZ_SUFFIX := bash: GZ_SUFFIX: command not found Makefile:86: recipe for target 'openwrt-ath79-generic-tplink_archer-c7-v5-squashfs-sysupgrade.bin' failed Fixes: 881ed09ee6e2 ("build: create JSON files containing image info") Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 0fb23d67f00a18c3f9e712ca97cfc34b38071f4a)
* build: create JSON files containing image infoPaul Spooren2020-06-303-1/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The JSON info files contain details about the created firmware images per device and are stored next to the created images. The JSON files are stored as "$(IMAGE_PREFIX).json" and contain some device/image meta data as well as a list of created firmware images. An example of openwrt-ramips-rt305x-aztech_hw550-3g.json { "id": "aztech_hw550-3g", "image_prefix": "openwrt-ramips-rt305x-aztech_hw550-3g", "images": [ { "name": "openwrt-ramips-rt305x-aztech_hw550-3g-squashfs-sysupgrade.bin", "sha256": "db2b34b0ec4a83d9bf612cf66fab0dc3722b191cb9bedf111e5627a4298baf20", "type": "sysupgrade" } ], "metadata_version": 1, "supported_devices": [ "aztech,hw550-3g", "hw550-3g" ], "target": "ramips/rt305x", "titles": [ { "model": "HW550-3G", "vendor": "Aztech" }, { "model": "ALL0239-3G", "vendor": "Allnet" } ], "version_commit": "r10920+123-0cc87b3bac", "version_number": "SNAPSHOT" } Signed-off-by: Paul Spooren <mail@aparcar.org> (backported from commit 881ed09ee6e23f6c224184bb7493253c4624fb9f) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: do not build TP-Link tiny images by defaultAdrian Schmutzler2020-06-281-0/+2
| | | | | | | | | | | | | | | For quite some time, the tiny (4M flash) TP-Link sysupgrade and factory images cannot be built anymore by the buildbots, just the initramfs-kernel.bin files are still there. Disable these images for the buildbots and don't waste build resources. Note that these devices still build fine with default settings, just not with the additional packages and config symbols for the buildbots. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mediatek: fix IPv4-only corner case and commit in 99-net-psAdrian Schmutzler2020-06-281-1/+4
| | | | | | | | | | | | | | | | | The uci config section network.globals set up in /bin/config_generate will only be created if /proc/sys/net/ipv6 exists. Correspondingly, lacking IPv6 support, the command uci set network.globals.packet_steering=1 will fail with "uci: Invalid argument" as the network.globals config has not been set up. Fix that by adding the setup there as well. While at it, limit the uci commit to the network config file. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 636b62e8e232951154ac4ccd7972fda3f8de0379)