aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* linux-firmware: set PKG_MIRROR_HASHDaniel Golle2018-09-261-1/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* linux-firmware: add ath10k supportJohn Crispin2018-09-262-4/+109
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ath10k-firmware: disable the package and use default linux-firmware packageJohn Crispin2018-09-261-7/+7
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mac80211: rebase ontop of v4.18.5John Crispin2018-09-26284-15968/+388
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* kernel: bump 4.14 to 4.14.72Koen Vandeputte2018-09-2616-492/+21
| | | | | | | | | | | | | | | | | | | Refreshed all patches. Removed upstreamed: - 203-MIPS-ath79-fix-restart.patch - 0013-MIPS-ath79-fix-system-restart.patch - 180-earlycon-initialize-port-uartclk-based-on-clock-frequency-property.patch - 181-earlycon-remove-hardcoded-port-uartclk-initialization-in-of_setup_earlycon. patch - 700-1-6-e1000e-Remove-Other-from-EIAC.patch - 700-2-6-Partial-revert-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch - 700-3-6-e1000e-Fix-queue-interrupt-re-raising-in-Other-interrupt.patch - 700-4-6-e1000e-Avoid-missed-interrupts-following-ICR-read.patch Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.129Koen Vandeputte2018-09-267-41/+21
| | | | | | | | | | | | Refreshed all patches. Removed upstreamed: - 203-MIPS-ath79-fix-restart.patch Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 3.18 to 3.18.123Koen Vandeputte2018-09-262-3/+3
| | | | | | | | | Refreshed all patches. Compile-tested on: adm5120 Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* netifd: do not validate relevant section when ipv6 is not supportedRosy Song2018-09-252-3/+3
| | | | Signed-off-by: Rosy Song <rosysong@rosinson.com>
* base-files: add network_get_metric() to /lib/functions/network.shFlorian Eckert2018-09-252-1/+6
| | | | | Signed-off-by: Florian Eckert <fe@dev.tdt.de> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* kernel: netfilter: add IPVS kernel module supportMauro Mozzarelli2018-09-241-0/+92
| | | | | | | | | | | | | | | | IPVS (IP Virtual Server) implements transport-layer load balancing inside the Linux kernel, so called Layer-4 switching. IPVS running on a host acts as a load balancer at the front of a cluster of real servers, it can direct requests for TCP/UDP based services to the real servers, and makes services of the real servers to appear as a virtual service on a single IP address. This change adds the following kmod packages - kmod-nf-ipvs - kmod-nf-ipvs-ftp - kmod-nf-ipvs-sip Signed-off-by: Mauro Mozzarelli <mauro@ezplanet.org> Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* ncurses: use default host installAndy Walsh2018-09-241-6/+0
| | | | | | * just use default host/install, so libs/headers get properly generated/installed Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
* gettext-full: host compile with -fpicAndy Walsh2018-09-241-0/+2
| | | | Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
* zram-swap: Shell cosmeticSamuel Casa2018-09-241-4/+4
| | | | Signed-off-by: Samuel Casa <samuel.casa@neratec.com>
* zram-swap: remove trailing whitespaces in init scriptSamuel Casa2018-09-241-2/+2
| | | | | | Signed-off-by: Samuel Casa <samuel.casa@neratec.com> [slightly reword subject] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* dante: disable sched_getscheduler() - not implemented in muslDavid Yang2018-09-241-3/+4
| | | | | | | | | | | | | | | | | musl doesn't come with an valid implementation of `sched_getscheduler()`; it simply returns -ENOSYS for it. Without this option (and compile dante with `sched_getscheduler()` enabled), you will get error: serverinit(): sched_getscheduler(2): failed to retrieve current cpuscheduling policy: Function not implemented and dante won't start at all. Ref: http://lists.alpinelinux.org/alpine-devel/3932.html Ref: http://lists.alpinelinux.org/alpine-devel/3936.html Signed-off-by: David Yang <mmyangfl@gmail.com> [slightly reword commit message] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* base-files: fix postinstall uci-defaults removalTony Ambardar2018-09-241-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 7f694582 introduced a bug where default_postinst() often fails to remove a uci-defaults script after application, leaving it to run again after a reboot. (Note: commit 7f694582 also introduced FS#1021, now fixed by 73c745f6) The subtle problem arises from the shell logical chain: [ -f "$i" ] && . "$i" && rm -f "$i" Most uci-defaults scripts contain a terminal 'exit 0' statement which, when sourced, results in the logic chain exiting before executing 'rm -f'. This was observed while testing upgrades of 'luci-app-sqm'. The solution is to wrap the shell sourcing in a subshell relative to the command 'rm -f': ( [ -f "$i" ] && . "$i" ) && rm -f "$i" Revert to using 'grep' to prefilter the list of entries from the control file, which yields the full path of uci-defaults scripts. This allows keeping the existence check, directory change and script sourcing inside the subshell, with the script removal correctly outside. This approach avoids adding a second subshell only around the "." (source) command. The change also preserves the fix FS#1021, since the full path is used to source the script, which is POSIX-portable irrespective of PATH variable or reference to the CWD. Run Tested on: LEDE 17.01.4 running ar71xx, while tracing installation of package luci-app-sqm with its associated /etc/uci-defaults/luci-sqm file. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* rules.mk: add ESED commandKonstantin Demin2018-09-241-0/+1
| | | | | | | ESED is SED with extended regular expressions turned on. Command line and usage are the same as for SED. Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
* kernel: pick earlycon regression fixes from the stable-queue.gitRafał Miłecki2018-09-243-33/+85
| | | | | | | This fixes regression introduced in kernel 4.14 and makes bcm53xx revert obsolete. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* build: drop buildbot toolchain rebuild check when not using gitFelix Fietkau2018-09-241-0/+2
| | | | | | | | The check cleans and rebuilds the toolchain if it changed on update. When building from a source tarball, it is reasonable to expect that there will be no updates, so no rebuild check is necessary Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lldpd: inhibit linking of libbsd on !GLIBCJo-Philipp Wich2018-09-241-0/+4
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* busybox: fix dependency for IPV6Rosy Song2018-09-232-1/+2
| | | | Signed-off-by: Rosy Song <rosysong@rosinson.com>
* kernel: fix build of nftablesHauke Mehrtens2018-09-221-0/+67
| | | | | | | | Backport an additional patch from 4.16 for nftables. This fixes a build problem recently introduced. Fixes: f57806b56e5 ("kernel: generic: Fix nftables inet table breakage") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* layerscape: build ls-dpl package with linux dtc toolYangbo Lu2018-09-221-0/+3
| | | | | | | | | Building ls-dpl package requires the dtc tool. This patch is to support using linux dtc tool for ls-dpl package. This avoids compile issue when host system doesn't have the dtc tool. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: fix get_device_file() function of restoolYangbo Lu2018-09-221-0/+107
| | | | | | | | | | | | | | The restool failed to work with current gcc-7.3.0-musl. This patch is to add a restool fix-up patch to fix multiple problems encountered in the get_device_file() function: - The deprecated atoi() function is replaced by strtoul - An invalid memory access was being performed by using memory from dir->d_name even after closedir(). This is fixed by a strdup() on the device filename. - Also, error prints now print any relevant error code. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update README for SD card boot and new devicesYangbo Lu2018-09-221-100/+96
| | | | | | | This patch is to update the README since SD card boot support and LS1012AFRWY/LS1021ATWR were introduced. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add ls1012afrwy support and drop ls1012afrdmYangbo Lu2018-09-228-60/+64
| | | | | | | | | | | | | | | | | | | | | | | ls1012afrdm was no longer supported in NXP Layerscape SDK. Instead a new board ls1012afrwy was introduced in LSDK. This patch is to drop ls1012afrdm and add ls1012afrwy support. Since only 2MB NOR flash could be used, we just put u-boot and firmware on NOR flash, and put kernel/dtb/rootfs on SD card. The Layerscape FRWY-LS1012A board is an ultra-low-cost development platform for LS1012A Series Communication Processors built on Arm Cortex-A53. This tool refines the FRDM-LS1012A with more features for a better hands-on experience for IoT, edge computing, and various advanced embedded applications. Features include easy access to processor I/O, low-power operation, micro SD card storage, an M2 connector, a small form factor, and expansion board options via mikroBUS Click Module. The MicroBUS Module provides easy expansion via hundreds of powerful modules supporting sensors, actuators, memories, and displays. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add SD card boot supportYangbo Lu2018-09-2211-2/+191
| | | | | | | | | NOR/QSPI Flash on Layerscape board only has limited 64MB memory size. Since some boards (ls1043ardb/ls1046ardb/ls1088ardb/ls1021atwr) could support SD card boot, we added SD boot support for them to put all things on SD card to meet large memory requirement. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add armv7 subtarget and ls1021atwr board supportYangbo Lu2018-09-228-3/+1027
| | | | | | | | | | | | | | | | | | The NXP TWR-LS1021A module is a development system based on the QorIQ LS1021A processor. - This feature-rich, high-performance processor module can be used standalone or as part of an assembled Tower System development platform. - Incorporating dual Arm Cortex-A7 cores running up to 1 GHz, the TWR-LS1021A delivers an outstanding level of performance. - The TWR-LS1021A offers HDMI, SATA3 and USB3 connectors as well as a complete Linux software developer's package. - The module provides a comprehensive level of security that includes support for secure boot, Trust Architecture and tamper detection in both standby and active power modes, safeguarding the device from manufacture to deployment. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: split image makefile per subtargetYangbo Lu2018-09-223-185/+317
| | | | | | | | | | | | This patch is to split image makefile per subtarget. The ARMv7 subtarget will be added in the future. It will be not convinient if only one makefile is used for several subtargets management and future development. This patch also dropped 32-bit Traverse LS1043-S since Traverse only intended to support 64-bit and the 32-bit compile now had an issue. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: define ls-append functionYangbo Lu2018-09-221-73/+50
| | | | | | | This patch is to define a ls-append function for each device to reuse it for image appending. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update linux 4.9 patches to LSDK-18.06Yangbo Lu2018-09-2223-12438/+23929
| | | | | | | This patch is to update linux 4.9 patches to LSDK-18.06 release and to adjust config-4.9 accordingly. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add u-boot environment support for OpenWrt bootYangbo Lu2018-09-229-7/+86
| | | | | | | This patch is to implement u-boot environment txt files to support OpenWrt boot for all layerscape devices. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update u-boot to LSDK-18.06Yangbo Lu2018-09-223-58/+92
| | | | | | | | | | | | | | The u-boot source code had been migrated to codeaurora for LSDK-18.06 release and the future release. This patch is to update u-boot to LSDK-18.06 for both uboot-layerscape and uboot-layerscape-armv8_32b packages. Besides, this patch also introduced some other changes. - Reworked uboot-layerscape makefile to make it more readable. - Define package in uboot-layerscape-armv8_32b for each board. - Fixed u-boot package selection in target image makefile. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: drop uboot-layerscape patchesYangbo Lu2018-09-226-320/+0
| | | | | | | | Dropped uboot-layerscape patches which were environemnt patches. We will make u-boot environment binaries with a txt file for all devices. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update restool to LSDK-18.06Yangbo Lu2018-09-221-6/+5
| | | | | | | | The restool source code had been migrated to codeaurora for LSDK-18.06 release and the future release. This patch is to update restool to LSDK-18.06 release. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-ppa to LSDK-18.06Yangbo Lu2018-09-221-73/+46
| | | | | | | This patch is to update ls-ppa to LSDK-18.06 release and to rework ls-ppa makefile to make it more readable. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-rcw to LSDK-18.06Yangbo Lu2018-09-224-181/+87
| | | | | | | | | | | | The rcw source code had been migrated to codeaurora for LSDK-18.06 release and the future release. The source code had also involved ls1012ardb/ls1012afrdm/ ls1088ardb/ls2088ardb rcw, so we updated ls-rcw to LSDK-18.06, reworked the makefile and dropped ls-rcw-bin package in this patch. Also reworked ls-rcw patch to adapt to the latest source code. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ppfe-firmware to LSDK-18.06Yangbo Lu2018-09-221-6/+4
| | | | | | This patch is to update ppfe-firmware to LSDK-18.06 release. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-mc to LSDK-18.06Yangbo Lu2018-09-221-13/+7
| | | | | | This patch is to update ls-mc to LSDK-18.06 release. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-dpl to LSDK-18.06Yangbo Lu2018-09-221-16/+12
| | | | | | | | | The dpl-examples source code had been migrated to codeaurora for LSDK-18.06 release and the future release. This patch is to update this package to LSDK-18.06. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update fman-ucode to LSDK-18.06Yangbo Lu2018-09-222-62/+24
| | | | | | | | | Actually there was no change for fman-ucode in LSDK-18.06 just tagged with LSDK-18.06. This patch is to rework the fman-ucode makefile to make it more readable, and to use lsdk-1806 as the PKG_VERSION. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* zynq: kernel: select FPGA-related configsLuis Araneda2018-09-221-0/+10
| | | | | | These configs are necessary to program the FPGA fabric Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* sunxi: build image/uboot for the NanoPi NEO2Jasper Scholte2018-09-222-0/+19
| | | | | | | | The NanoPi NEO2 is a small Allwinner H5 based board available with different DRAM configurations. This board is very similar to the NanoPi NEO PLUS2 Signed-off-by: Jasper Scholte <NightNL@outlook.com>
* kernel: generic: Fix nftables inet table breakageBrett Mastbergen2018-09-2231-42/+1230
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit b7265c59ab7d ("kernel: backport a series of netfilter cleanup patches to 4.14") added patch 302-netfilter-nf_tables_inet-don-t-use- multihook-infrast.patch. That patch switches the netfilter core in the kernel to use the new native NFPROTO_INET support. Unfortunately, the new native NFPROTO_INET support does not exist in 4.14 and was not backported along with this patchset. As such, nftables inet tables never see any traffic. As an example the following nft counter rule should increment for every packet coming into the box, but never will: nft add table inet foo nft add chain inet foo bar { type filter hook input priority 0\; } nft add rule inet foo bar counter This commit pulls in the required backport patches to add the new native NFPROTO_INET support, and thus restore nftables inet table functionality. Tested on Turris Omnia (mvebu) Fixes: b7265c59ab7d ("kernel: backport a series of netfilter cleanup ...") Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
* kernel: add Si7020 relative humidity/temperature sensor driverHartmut Knaack2018-09-221-0/+18
| | | | | | | Add support for the Silicon Labs Si7020 family of relative humidity and temperature sensors using the I2C bus. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
* kernel: add TSL4531 ambient light sensor driverHartmut Knaack2018-09-221-0/+18
| | | | | | | Add support for the TAOS TSL4531x family of ambient light sensors using the I2C bus. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
* ath79: Fix GL-AR300M USB triggerRobert Marko2018-09-221-1/+1
| | | | | | Correct a typo preventing USB trigger to work on AR300M. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ar71xx: flag FritzBox 4020 buttons as active lowDavid Bauer2018-09-221-2/+2
| | | | | | | | | Buttons of AVM FritzBox 4020 are incorrectly flagged as active high. This was an oversight as RFKill button was working as expected even with incorrectly flagged GPIO. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: flag FritzBox 4020 buttons as active lowDavid Bauer2018-09-221-2/+2
| | | | | | | | | Buttons of AVM FritzBox 4020 are incorrectly flagged as active high. This was an oversight as RFKill button was working as expected even with incorrectly flagged GPIO. Signed-off-by: David Bauer <mail@david-bauer.net>
* mbedtls: update to 2.13.0Magnus Kroken2018-09-221-2/+2
| | | | | | | | * Fixed a security issue in the X.509 module which could lead to a buffer overread during certificate extensions parsing. * Several bugfixes. * Improvements for better support for DTLS on low-bandwidth, high latency networks with high packet loss. Signed-off-by: Magnus Kroken <mkroken@gmail.com>