aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: add support for TP-Link RE355Henryk Heisig2018-02-1315-5/+142
| | | | | | | | | | | | | | | | | | | | | | | | This device is identical as TP-Link RE450 RE355 is a dual-band AC1200 router, based on Qualcomm/Atheros QCA9558+QCA9880. Specification: 720/600/200 MHz (CPU/DDR/AHB) 64/128 MB of RAM (DDR2) 8 MB of FLASH (SPI NOR) 3T3R 2.4 GHz 3T3R 5 GHz 1x 10/100/1000 Mbps Ethernet 7x LED, 3x button UART header on PCB Flash instruction: Web: Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and use OEM System Tools - Firmware Upgrade site. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* kmod-sched: add sch_multiq to extra schedulersPhilip Prindeville2018-02-131-0/+1
| | | | | | | For hardware that supports multiple h/w output queues, add a compatible scheduler (NET_SCH_MULTIQ). Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* base-files: don't evaluate block-device ueventDaniel Golle2018-02-131-4/+8
| | | | | | | | | | | | | Current code and also before commit da52dd0c83 was vulnerable to shell injection using volume lables in the GPT partition table of block devices. Given that partition names can be freely defined in GPT tables we really shouldn't evaluate a string which is potentially crafted with evil intentions. Hence rather use `export -n` to absorb the uevent's variables into the environment. Fixes commit da52dd0c83 (base-files: quote values when evaluating uevent) Signed-off-by: Daniel Golle <daniel@makrotopia.org> [mschiffer@universe-factory.net: suggested export -n usage]
* kernel: add IEEE-1284 parallel port supportDaniel Gimpelevich2018-02-121-5/+40
| | | | | | | | | | The kmod-lp package included both lp.ko and ppdev.ko, but ECP device drivers may or may not require lp NOT to be loaded, needing only ppdev. Additionally, There were no packages for any parport interface modules, such as uss720 or parport_pc, provided here. It has not been otherwise possible to use PC-style parport hardware for kmod-lp. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* brcm63xx: switch to kernel 4.9Jonas Gorski2018-02-121-1/+1
| | | | | | Now that we have support for it, let's switch to kernel 4.9. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ar7: switch to kernel 4.9Jonas Gorski2018-02-121-1/+1
| | | | | | | With generic run tested and ac49x compile tested, and no complaints so far, let's switch to 4.9. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ar7: fix ac49x compilation with 4.9Jonas Gorski2018-02-121-1/+1
| | | | | | | | This will introduce a warning on 3.18, but fixes an error when compiling for 4.9. Fixes: cf9e0a59aabd ("ar7: add kernel 4.9 support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* Revert "mediatek: activate fpu feature flag"John Crispin2018-02-121-1/+1
| | | | | | | | This reverts commit 3594447a7d0398c55ea78f658b52b7d8084ae9f9. This causes the userland to not come up properly Signed-off-by: John Crispin <john@phrozen.org>
* tools: update patch to v2.7.6Russell Senior2018-02-122-27/+2
| | | | | | | Removes a redundant patch with a fix already upstream. Build tested on apm821xx (PPC). Signed-off-by: Russell Senior <russell@personaltelco.net>
* mvebu: fix sysupgrade from 17.04 for clearfog proJonas Gorski2018-02-111-0/+1
| | | | | | | | | When clearfog was renamed to clearfog pro, it broke sysupgrade from 17.04 as the new images now get rejected as incompatible. Fix this by adding the legacy boardname to the compatible devices. Fixes: ec4a8c6dee81 ("mvebu: ClearFog renamed upstream to ClearFog Pro") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: add kernel 4.14 supportJonas Gorski2018-02-11193-0/+23023
| | | | | | | Add support for kernel 4.14. Increases compressed kernel size by ~64k compared to 4.9. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* broadcom-wl: fix compilation with 4.14Jonas Gorski2018-02-111-0/+10
| | | | | | | | The last_rx field was removed from net_device. Since the field wasn't used by the generic subsystem, and the driver only writes to it, just remove the usage. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: add kernel 4.9 supportJonas Gorski2018-02-11204-0/+23683
| | | | | | | | Add support for kernel 4.9 based on the more upstream comformant partition defintions. Increases compressed kernel size by ~95k compared to 4.4. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: switch to new partition layout specificationJonas Gorski2018-02-1187-863/+1407
| | | | | | | Now that we support parsing the expected upstream definition, update the dts files to it. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: enhance dt partitions support to match upstream more closelyJonas Gorski2018-02-111-9/+19
| | | | | | | Partitions are supposed to be enclosed in an extra partitions node. Allow the bcm63xxpart parser to cope with that. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: backport latest bcm63xx_enet changes from upstreamJonas Gorski2018-02-1111-19/+201
| | | | | | No functional changes, just simple cleanups. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: fix ephy reset gpio lookupJonas Gorski2018-02-111-1/+1
| | | | | | | The lookup needs to be called just "reset" for the common code. Fixes: 054c0d4e3193 ("brcm63xx: backport mdio-bus reset gpio support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ar71xx: add missing config symbol ATH79_MACH_CF_E375ACMatthias Schiffer2018-02-112-0/+2
| | | | | Fixes: bf66bb8c96 "ar71xx:add support for COMFAST CF-E375AC" Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* wrt55agv2-spidevs: remove obsolete packageFelix Fietkau2018-02-114-155/+0
| | | | | | | It hasn't compiled in a long time and needs to be updated before it can be restored anyway. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: activate fpu feature flagHauke Mehrtens2018-02-111-1/+1
| | | | | | | | | | | The arm CPUs uses in the supported Mediatket SoCs have a FPU accordingly to the datasheet, activate it also. The CPU subtype "neon-vfpv4" is selected, but the toolcahin generated for this SoC will still be compiled with soft float and not with the hard float ABI as we haven't the fpu feature flag set. If this toolchain is reused by other targets this will even affect other targets. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* base-files: quote values when evaluating ueventDaniel Golle2018-02-111-3/+2
| | | | | | | | When sourcing /sys/class/block/*/uevent values have to be quoted as they may contain spaces (e.g. in PARTNAME). Fix this by pre-processing with sed before sourcing. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq-wifi: drop OpenMesh A42 board-2.binSven Eckelmann2018-02-113-3/+2
| | | | | | | | | | | The BDFs for OpenMesh A42 were upstreamed [1] to the ath10k-firmware repository and are now part of ath10k-firmware 2018-01-26. The ipq-wifi-openmesh_a42 package can now be dropped because OpenWrt already ships the QCA4019 board-2.bin from this version. [1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* firmware: ath10k-firmware: update to 2018-01-26Sven Eckelmann2018-02-111-3/+3
| | | | | | | | | * introduces the BDFs for the OpenMesh A42 in /lib/firmware/ath10k/QCA4019/hw1.0/board-2.bin. * adds new firmware firmware-6.bin_RM.4.4.1.c1-00037-QCARMSWP-1 for QCA6174 hw3.0 Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx:add support for COMFAST CF-E375ACDing Tengfei2018-02-1111-1/+139
| | | | | | | | | | | | | | | | | | | | | | | | COMFAST CF-E375AC is a ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9563 + QCA9886 + QCA8337. Short specification: 2x 10/100/1000 Mbps Ethernet, with PoE support 128MB of RAM (DDR2) 16 MB of FLASH 3T3R 2.4 GHz, 802.11b/g/n 2T2R 5 GHz, 802.11ac/n/a, wave 2 built-in 5x 3 dBi antennas output power (max): 500 mW (27 dBm) 1x RGB LED, 1x button built-in watchdog chipset Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Ding Tengfei <dtf@comfast.cn>
* ar71xx: remove bs-partition ro-flag for UniFi ACDavid Bauer2018-02-111-1/+1
| | | | | | | | | | | | This removes the read-only flag from the bs (bootselect) partition on UniFi AC devices. This allows to correct the indicator from which partition the device is booting its kernel from. See also: - https://github.com/freifunk-gluon/gluon/issues/1301 - https://bugs.lede-project.org/index.php?do=details&task_id=662 Signed-off-by: David Bauer <mail@david-bauer.net>
* kexec-tools: bump version to 2.0.16Philip Prindeville2018-02-115-245/+3
| | | | | | All patches have been integrated upstream. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* kexec-tools: issue warning when dd'ing vmcorePhilip Prindeville2018-02-112-1/+3
| | | | | | | | With no warning, it just looks like the box has hung during boot. We don't want users resetting it without having captured a crashdump. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* ramips: add support for TP-Link Archer C50 v3Henryk Heisig2018-02-116-0/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link Archer C50 v3 is a router with 5-port FE switch and non-detachable antennas. It's based on MediaTek MT7628N+MT7612E. Specification: - MediaTek MT7628N/N (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 4x external, non-detachable antennas - UART (J1) header on PCB (115200 8n1) - 7x LED (GPIO-controlled*), 2x button, power switch * WAN LED in this devices is a dual-color, dual-leads type which isn't (fully) supported by gpio-leds driver. This type of LED requires both GPIOs state change at the same time to select color or turn it off. For now, we support/use only the green part of the LED. Flash instruction: The only way to flash LEDE image in ArcherC50v3 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.66/24 and tftp server. 2. Rename "openwrt-ramips-mt7628-ArcherC50v3-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ramips: ArcherC20v4: use common TP-Link dtsi fileHenryk Heisig2018-02-111-72/+3
| | | | | | and remove common part from dts file. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ramips: change the TP-Link dtsi filenameHenryk Heisig2018-02-114-3/+3
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* kernel: mtdsplit: Add support for D-link JBOOTPawel Dembicki2018-02-117-0/+287
| | | | | | | | | The D-Link devices with JBOOT bootloader use their own kernel image header (stag + sch2 headers). This driver find jImage header and set rootfs start after kernel file. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ipq806x: mark AVM FB4040 switchport as untaggedDavid Bauer2018-02-111-1/+1
| | | | | | | | This commit marks the CPUs switchport explicit as untagged. Otherwise, an eth0.1 interface is created and the devices LAN-ports are not working. Signed-off-by: David Bauer <mail@david-bauer.net>
* x86: add preinit hook to reload microcodeZoltan HERPAI2018-02-111-0/+10
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* firmware: add microcode package for IntelZoltan HERPAI2018-02-111-0/+49
| | | | | | | | | | | | | | | | Compiling the Intel microcode package results in a microcode.bin and a microcode-64.bin. As we can decide based on the subtarget which should be used, we'll only split the required .bin file with iucode-tool. x64 will get the intel-microcode-64.bin All other variants will get intel-microcode.bin The microcodes will be updated from preinit via a common script - that's the earliest place where we can do it. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* firmware: add microcode package for AMDZoltan HERPAI2018-02-111-0/+45
| | | | | | | | | | | Use the Debian repository for sourcing the ucode files. Current (20171205) includes support for fam17h CPUs already. The microcodes will be updated from preinit via a common script - that's the earliest place where we can do it. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* tools: add iucode-toolZoltan HERPAI2018-02-111-0/+47
| | | | | | | | | | | | Add tool to "compile" Intel microcode files. The tool will be compiled for host (to split the microcode.dat) and for target (to forcibly reload the microcode if required). Instead of using the large microcode.bin/microcode-64.bin, the splitted ucode files (separate for CPU families) will be installed. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* x86: enable microcode loading for Intel and AMDZoltan HERPAI2018-02-112-2/+8
| | | | | | Enable for 4.9 and 4.14. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* fstools: update to latest git HEADJohn Crispin2018-02-111-3/+3
| | | | | | | | 3d23981 strip trailing spaces from vfat labels c4a3c97 fix vfat volume label 5010710 block: support /dev/nvme* nodes Signed-off-by: John Crispin <john@phrozen.org>
* uboot-fritz4040: Fix build with HOSTCFLAGSHauke Mehrtens2018-02-111-1/+1
| | | | | | | | | | | | When we provide the HOSTCFLAGS to the U-Boot build it will fail because it can not find the u-boot provided header files any more. Just overwrite and not append the package specific configuration on top of the configuration provided by u-boot.mk. uboot-fritz4040 is based on U-Boot 2012.07 and this problem is probably similar to the problem seen with the lantiq and ar71xx u-boot build. Fixes: df9781a4205 ("u-boot,at91bootstrap: fix incorrect HOSTCPPFLAGS variable") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ar71xx: Orders the names of the devices alphabetically.Arne Zachlod2018-02-113-176/+176
| | | | Signed-off-by: Arne Zachlod <arne@nerdkeller.org>
* imx6: use DTS_DIR at image build codeAdrià Llaudet2018-02-101-1/+1
| | | | | | | | | Use "$(DTS_DIR)", defined at include/image.mk, instead of "$(LINUX_DIR)/arch/$(LINUX_KARCH)/boot/dts" in order to generalize and allow a better Device/* device-tree parameterization (i.e. DEVICE_DTS_DIR and DTS_DIR). Signed-off-by: Adrià Llaudet <adria.llaudet@gmail.com>
* archs38: bump kernel to 4.14.Evgeniy Didin2018-02-103-26/+28
| | | | | | | | | Update Linux kernel version from 4.9 to 4.14 for archs38. config-4.14 was simply regenerated with "make kernel_menuconfig". Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: John Crispin <john@phrozen.org>
* kernel: backport fix undefined abortEvgeniy Didin2018-02-102-0/+125
| | | | | | | | | | | | | | | | | | | While building mpi.ko module with stable Linux v4.14.14 an error occured: >ERROR: "abort" [lib/mpi/mpi.ko] undefined! In upstream Linux 4.15 this issue is fixed: Commit 7c2c11b208be ("arch: define weak abort()") https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7c2c11b208be09c156573fc0076b7b3646e05219 Commit dc8635b78cd8 ("kernel/exit.c: export abort() to modules") https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=dc8635b78cd8669c37e230058d18c33af7451ab1 So lets add backport patches until these fixes are not applied in stable version. Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> CC: John Crispin <john@phrozen.org> CC: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-fouFilip Moc2018-02-101-0/+22
| | | | | | | | | Once installed fou kernel module allows you to use FOU (Foo over UDP) and GUE (Generic UDP encapsulation) tunnel protocols. To get ip fou command working you also need to install ip-full. Signed-off-by: Filip Moc <lede@moc6.cz>
* uboot-mvebu: fix build ; use the build's tools/libresslAlexandru Ardelean2018-02-103-251/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since I have no openssl-dev on my machine, I first get this error: ``` tools/kwbimage.c:21:10: fatal error: openssl/bn.h: No such file or directory #include <openssl/bn.h> ``` After removing the UBOOT_MAKE_FLAGS the next error is: ``` tools/kwbimage.c:40:6: error: conflicting types for ‘EVP_MD_CTX_cleanup’ void EVP_MD_CTX_cleanup(EVP_MD_CTX *ctx) ``` After removing the OpenSSL patches the next error is: ``` HOSTLD tools/dumpimage /usr/bin/ld: cannot find -lssl /usr/bin/ld: cannot find -lcrypto collect2: error: ld returned 1 exit status scripts/Makefile.host:108: recipe for target 'tools/dumpimage' failed make[5]: *** [tools/dumpimage] Error 1 ``` So, the final part is to add the build system's HOST_LDFLAGS to the UBOOT_MAKE_FLAGS. (which was done in the previous commit) Then the image builds. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* u-boot.mk: add HOST_LDFLAGS to UBOOT_MAKE_FLAGSAlexandru Ardelean2018-02-101-1/+1
| | | | | | | | This will make sure that the build system's paths for linking are available. This is needed mostly for linking with tools/libressl. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* u-boot,at91bootstrap: fix incorrect HOSTCPPFLAGS variableAlexandru Ardelean2018-02-102-2/+2
| | | | | | | | | | | | | | | | | This would should up as `$$(HOSTCPPFLAGS)` in the host CFLAGS. ``` make --jobserver-fds=3,4 -j -C <openwrt>/build_dir/target-arm_cortex-a8+vfpv3_musl_eabi/u-boot-A10-OLinuXino-Lime/u-boot-2017.07 CROSS_COMPILE=arm-openwrt-linux-muslgnueabi- DTC="<openwrt>/build_dir/target-arm_cortex-a8+vfpv3_musl_eabi/linux-sunxi_cortexa8/linux-4.9.76/scripts/dtc/dtc" HOSTCC="gcc" HOSTCFLAGS='-O2 -I<openwrt>/staging_dir/host/include -I<openwrt>/staging_dir/host/usr/include -I<openwrt>/staging_dir/hostpkg/include -I<openwrt>/staging_dir/target-arm_cortex-a8+vfpv3_musl_eabi/host/include $$(HOSTCPPFLAGS)' HOSTLDFLAGS="" BL31=<openwrt>/staging_dir/target-arm_cortex-a8+vfpv3_musl_eabi/image/bl31.bin ``` And then it would complain with: ``` /bin/sh: 1: HOSTCPPFLAGS: not found ``` Also, HOSTCPPFLAGS does not exist. The correct var is HOST_CPPFLAGS. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* valgrind: Fix compile on ARM64Hauke Mehrtens2018-02-101-2/+7
| | | | | | | Activate the support for 64 bit on all 64 bit CPUs and not only x86_64. ARM64 does not provide an xml file, so do not pack any. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bunwind: build for ARM64Hauke Mehrtens2018-02-101-1/+1
| | | | | | | ARM64 is supported by libunwind since some versions, allow building it for aarch64. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* config: fix ARM64 dependency checkHauke Mehrtens2018-02-101-2/+2
| | | | | | The ARM64 CPUs use aarch64 config symbol, fix the depends lines. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 15:56:24 +0000