aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: cr5000: Fix the reset button as KEY_RESTARTDaniel F. Dickinson2018-07-301-1/+1
| | | | | | | The reset button was incorrectly returning KEY_WPS_BUTTON as the key code. We want KEY_RESTART., so make that fix. Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
* ar71xx: cr5000: board data: Use better macro nameDaniel F. Dickinson2018-07-301-2/+2
| | | | | | | The PCIe wireless MAC address address is better labelled as WMAC than MAC to emphasize that it is for a wireless interface. Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
* ath79: Port PowerCloud Systems CAP324 supportDaniel F. Dickinson2018-07-305-0/+194
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CAP324 was an AP for a NaaS offering that is now defunct. While previously supported in the ar71xx arch, there were some errata (to be fixed shortly). Notable differences from ar71xx support: 1) The method of getting the ath9k firmware for the PCIe 2ghz wifi has changed (due to changes in how the arch handles this), since this device doesn't use the EEPROM except to get the MAC address of the wifi. 2) /etc/config/wireless will need to be regenerated as the path(s) to the wireless device(s) have changed. 3) ath79 OpenWrt firmware no longer supports build an image that allows reverting to stock firmware (as the cloud service no longer exists, the stock firmware is useless), instead using all of the flash for image and overlay (less u-boot/env and art). 4) Initial network config treats the ethernet port as a Lan port with the standard default address (192.168.1.1 unless changed in .config --e.g. via menuconfig) instead of using DHCP (this was the default for the stock firmware, however for openwrt use this is rather confusion and counter-productive as the user has a harder time finding the device on the network. Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
* ath79: Port PowerCloud Systems CR5000 supportDaniel F. Dickinson2018-07-304-0/+246
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add ath79 arch support for PowerCloud Systems CR5000. Previously supported under ar71xx (however there are some errors in that support; to be fixed shortly). Info: * This board is based on the Atheros DB120 reference design, but doesn't use the on-board switch. Instead it attachs GMAC0 to an AR8327 switch. * It only uses GMAC0 and the WAN is simply a VLAN in the stock firmware. * It has 64MB RAM and 8MB flash. * In the dts version we get rid of using 'open-drain' for the AR8327 LED controls. * As with the platform data version we disable JTAG as this conflicts with one of the pair of GPIO's required for the power/status LED (GPIO2 and GPIO4 are used for this LED). * The pcie card wifi has an EEPROM but gets it's MAC address from the ART partition. * The SoC wifi (2.4 GHz) is all from the ART. * The USB is support comes from the SoC. NB. This is actually an AR9342 rather than AR9344 but we use the 9344 definitions because there are no relevant differences for this board. NB: Building only images that don't support reverting to the old cloud-based firmware as the Skydog cloud service for the CR5000 no longer exists. Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
* iwinfo: update to version 2018-07-24Nick Hainke2018-07-301-4/+4
| | | | | | | | | Update to new iwinfo version. Adds support for channel survey. Adds ubus support. Etc. Signed-off-by: Nick Hainke <vincent@systemli.org>
* grub2: fix packed-not-aligned error on GCC 8Edi Turn2018-07-301-0/+71
| | | | | | Fix the compile error "packed-not-aligned" when using GCC 8. Signed-off-by: Edi Turn <yyxstter@gmail.com>
* treewide: Bump PKG_RELEASE due to mbedtls updateDaniel Engberg2018-07-304-4/+4
| | | | | | | Bump PKG_RELEASE on packages that depends on (lib)mbedtls to avoid library mismatch. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* mbedtls: Update to 2.12.0Daniel Engberg2018-07-302-28/+28
| | | | | | | | | | | | | | | Update mbedtls to 2.12.0 Multiple security fixes Add support for Chacha20 and Poly1305 cryptographic primitives and their associated ciphersuites Difference in size on mips_24kc (ipk): 164kbytes (167882 bytes) 170kbytes (173563 bytes) https://tls.mbed.org/tech-updates/releases/mbedtls-2.12.0-2.7.5-and-2.1.14-released Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* toolchain/binutils: Add binutils 2.31.1Daniel Engberg2018-07-307-0/+110
| | | | | | Add binutils 2.31.1 to repo Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* ar71xx: improve MikroTik wAP R supportThibaut VARÈNE2018-07-303-2/+67
| | | | | | | | | | | | | 81d446b045176e3e25bb0ef74e3d060b51a0a353 introduced incomplete support for this device. This patch attempts to correct the situation based on OEM source code. LED1-3 are GSM mode on OFW (2G/3G/4G) hence unassigned here. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> Tested-by: David Ehrmann <ehrmann@gmail.com>
* ar71xx: add missing diag LED support for RB wAP 2nDThibaut VARÈNE2018-07-301-1/+2
| | | | | | | 3b15eb06c366cf3805590a61f22e966a95bf8101 did not include diag.sh edit Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ar71xx: rbspi: mark rb911L user led as active lowThibaut VARÈNE2018-07-301-1/+4
| | | | | | | | | | | | The active_low flag was missing for the user LED. This LED is open drain (confirmed in OEM source) and open drain only makes sense for active low GPIOs. The two wireless LEDs mentioned in the comments are also #defined for future reference. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> Tested-by: Ryan Mounce <ryan@mounce.com.au>
* ar71xx: rbspi: fix RB wAP AC gpio conflict and LEDThibaut VARÈNE2018-07-302-11/+9
| | | | | | | | | | | | | | | e15c63a37574bd15ce3a6636c2f04741ab76f7b9 introduced code that was trying to register GPIO 1 as both an LED and a button. The OEM source makes it clear that LED1 is not wired to the SoC GPIOs. GPIO 1 is the reset button. Furthermore the (green) power led default state should also be defined, (matching OEM source), and it should be used by diag.sh since it's currently the only software-controllable LED. This patch fixes these issues and renames the corresponding #defines for clarity Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ar71xx: rbspi: clarify USB power gpios actionThibaut VARÈNE2018-07-301-10/+9
| | | | | | | | | | | | | | | The gpios that control power toggle for USB on the RouterBOARD devices are active low _off_ switches. When they are active (low), power is off. When they are inactive (high), power is on. Rename GPIO defines, set gpios to GPIOF_ACTIVE_LOW for consistency and reflect their true action in the display name. This brings openwrt code in line with OEM. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> Tested-by: Ryan Mounce <ryan@mounce.com.au>
* admswconfig: Remove dead URL + HTTPSRosen Penev2018-07-301-2/+1
| | | | | | Found using uscan. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: add DT binding support to the mtd redboot parserRafał Miłecki2018-07-302-0/+62
| | | | | | It allows using that parser with the "compatible" set in DT. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* apm821xx: clean up gpio-hogsChristian Lamparter2018-07-302-30/+31
| | | | | | | | | | | convert the usb and both sata port power related gpio-hogs to what they really are: fixed-regulators. The ethernet phy-reset gpio-hog is replaced by a proper upstream (4.15+) reset-gpios property in the mdio-node. So this will work eventually. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: split MBL's rootfs.img.gz into a sysupgrade and factory imageChristian Lamparter2018-07-301-2/+3
| | | | | | | | | | | | | | | @vahid-dan reported a issue with extracting the rpi images with Gnome's Archive Manager: "Ubuntu Archive Manager cannot extract the file and it just throws a general error message: "An error occurred while extracting files". <https://forum.lede-project.org/t/corrupted-pre-built-v18-06-0-rc2-image-for-rpi> The MBL's rootfs.img.gz image is generated in much the same way. Hence this patch preemptively splits the rootfs.img.gz image into a sysupgrade and a factory image. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: build squashfs-rootfs images for the MBLChristian Lamparter2018-07-305-10/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for squashfs as the root filesystem. advantages: - migrate from a existing -ext4 installation and back with the sysupgrade utility - existing partition layout will not be lost during switch - slightly smaller image size as compared to the -ext4 image. disadvantages: - needs f2fs + tools. This is because fstools rootdisk.c decides based on the partition size (currently root partitions > 100 MiB) f2fs is used as the rootfs_data filesystem. - rootfs_data is placed into the rootfs partition after the squashfs. This makes it difficult for tools that expect a /dev/sda${X} device. It also makes it difficult for data recovery tools as they might not expect to find a embedded partition or will be slightly confused. ... or will not support f2fs. For people with existing build configurations: make sure to include mkf2fs and f2fsck packages into the image. Otherwise the new -squashfs image will only boot from the ram-overlay. Note: All overlay data (configurations/all installed packages/...) will be placed in inside the rootfs partition (i.e. /dev/sda2) just after the squashfs image. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* brcm2708: split sdcard.img.gz into a sysupgrade and factory imageChristian Lamparter2018-07-301-2/+3
| | | | | | | | | | | | | | | | | | @vahid-dan reported a issue with extracting the rpi images with Gnome's Archive Manager: "Ubuntu Archive Manager cannot extract the file and it just throws a general error message: "An error occurred while extracting files". <https://forum.lede-project.org/t/corrupted-pre-built-v18-06-0-rc2-image-for-rpi> @blogic told me to split the single sdcard.img.gz for the RPi into a sysupgrade and a factory image for all brcm2708 targets. The factory images will have no metadata attached, this way these utilities that can't deal with the attached metadata will not fail for no reason. Cc: John Crispin <john@phrozen.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq-wifi: add a note / reminder about upstreaming new board filesChristian Lamparter2018-07-301-0/+3
| | | | | | | | |Please send a mail with your device-specific board files upstream. |You can find instructions and examples on the linux-wireless wiki: |<https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* brcm63xx: drop linux,part-probe usage where possibleJonas Gorski2018-07-2988-182/+5
| | | | | | | It was present as 4.4 compatibility, but since we now use 4.9 or later with the new upstream solution, we don't need it anymore. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: drop own implementation of DT partitions in favour of upstreamJonas Gorski2018-07-294-320/+0
| | | | | | The binding works the same, so we can just drop the revert and the patch. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* thc-ipv6: Update URLsRosen Penev2018-07-291-2/+2
| | | | | | Development has moved to GitHub. Found using UScan. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* libjson-c: Update package URLRosen Penev2018-07-291-1/+1
| | | | | | Found through UScan. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* bcm53xx: revert SPI controller commit breaking flash readsRafał Miłecki2018-07-291-0/+146
| | | | | | | That upstream commit caused instability in flash reads. It was reported but there isn't any proper fix as for now. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* tools/cmake: Update to 3.12.0Daniel Engberg2018-07-296-75/+7
| | | | | | | Update cmake to 3.12.0 Remove 140-curl-fix-libressl.patch as fix is in upstream Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* bcm53xx: backport BCM5301X/BCM53573 dts commits from 4.19+Rafał Miłecki2018-07-287-104/+475
| | | | | | | This includes Linksys EA9500 support, BCM53573 timer fix and upstream-ready partitions patch that replaces two downstream hacks. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: switch USB 3.0 PHY DT description to use MDIO busRafał Miłecki2018-07-282-1/+459
| | | | | | | | | | | | USB 3.0 PHY is attached to the MDIO bus and should be supported (accessed) as a MDIO device. This wasn't known initially which resulted in writing driver that was working with MDIO bus (using some magic values) without knowing it. This commit updates DT to properly describe MDIO & USB 3.0 PHY and enables required kernel drivers. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: backport DT fix for I2C controller interruptRafał Miłecki2018-07-281-0/+24
| | | | | | Specified interrupt type was incorrect. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* igmpproxy: add a silent logging optionDmitry Tunin2018-07-283-5/+6
| | | | | | | | [0-3](none, minimal[default], more, maximum) It is not 100% backward compatible, because now 0 disables logging Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
* dnsmasq: bump to dnsmasq v2.80test3Kevin Darbyshire-Bryant2018-07-2820-1565/+6
| | | | | | | | | | | | | | | | | Refresh patches Upstream commits since last bump: 3b6eb19 Log DNSSEC trust anchors at startup. f3e5787 Trivial comment change. c851c69 Log failure to confirm an address in DHCPv6. a3bd7e7 Fix missing fatal errors when parsing some command-line/config options. ab5ceaf Document the --help option in the french manual 1f2f69d Fix recurrent minor spelling mistake in french manual f361b39 Fix some mistakes in french translation of the manual eb1fe15 When replacing cache entries, preserve CNAMES which target them. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: backport mtd support for subpartitions in DTRafał Miłecki2018-07-2718-36/+402
| | | | | | | | | | | | | | | | This is a new & warm feature that allows nesting partiitons in DT and mixing their types (e.g. static vs. dynamic). It's very useful for boards that have most partitions static but some of them require extra parsing (e.g. a "firmware" partition). It's required to successfully backport support for new devices using that new syntax in their DT files. Since brcm63xx has a custom alternative patch the upstream one is being reverted for it. The plan is to make brcm63xx use the upstream implementation. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* brcm47xx: revert upstream commit breaking BCM4718A1Rafał Miłecki2018-07-271-0/+76
| | | | | | This fixes kernel hang when booting on BCM4718A1 (& probably BCM4717A1). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport mtd patches with Broadcom of_match_table-sRafał Miłecki2018-07-275-19/+168
| | | | | | | Two tiny & trivial patches with no regression risk. One simplifies bcm53xx downstream patch. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* util-linux: package blockdev executableDaniel Golle2018-07-271-0/+16
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* wwan: Fix teardown for sierra_net driverMasashi Honma2018-07-271-1/+1
| | | | | | | The sierra_net driver is using proto_directip_setup for setup. So use proto_directip_teardown for teardown. Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
* ead: use new protocol setting API since libpcap 1.9.0Syrone Wong2018-07-271-3/+1
| | | | | | | Dropped the protocol API specific symbol: HAS_PROTO_EXTENSION and switch to the official API Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
* libpcap: update to 1.9.0Syrone Wong2018-07-279-306/+50
| | | | | | | | | | | | | 001-Fix-compiler_state_t.ai-usage-when-INET6-is-not-defi.patch dropped due to upstream 002-Add-missing-compiler_state_t-parameter.patch dropped due to upstream 202-protocol_api.patch dropped due to implemented upstream by another way upstream commit: https://github.com/the-tcpdump-group/libpcap/commit/55c690f6f834b4762697d7a134de439c9096c921 and renamed via: https://github.com/the-tcpdump-group/libpcap/commit/697b1f7e9b1d6f5a5be04f821d7c5dc62458bb3b ead is the only user who use the protocol api, we have to use the new api since libpcap 1.9.0 Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
* mac80211: brcmfmac: backport 4.19 patches preparing monitor mode supportRafał Miłecki2018-07-276-1/+383
| | | | | | | | Monitor mode isn't supported yet with brcmfmac, it's just an early work. This also prepares brcmfmac to work stable with new firmwares which use updated struct for passing STA info. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: backport brcmfmac fixes & debugging helpers from 4.18Rafał Miłecki2018-07-269-2/+341
| | | | | | | | | | | | The most important is probably regression fix in handling platform NVRAM. That bug stopped hardware from being properly calibrated breaking e.g. 5 GHz for Netgear R8000. Other than that it triggers memory dumps when experiencing firmware problems which is important for debugging purposes. Fixes: 7e8eb7f309a8 ("mac80211: backport brcmfmac firmware & clm_blob loading rework") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ubus: update to latest git HEADJo-Philipp Wich2018-07-261-3/+3
| | | | | | 40e0931 libubus: pass an empty UBUS_ATTR_DATA block if msg is NULL on invoke Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* odhcpd: update to latest git HEADJo-Philipp Wich2018-07-261-4/+4
| | | | | | 44cce31 ubus: avoid dumping interface state with NULL message Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* firewall: update to latest git HEADJo-Philipp Wich2018-07-261-3/+3
| | | | | | aa8846b ubus: avoid dumping interface state with NULL message Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ubus: update to latest git HEADJohn Crispin2018-07-251-3/+3
| | | | | | 884be45 libubus: check for non-NULL data before running callbacks Signed-off-by: John Crispin <john@phrozen.org>
* libubox: update to latest git HEADJohn Crispin2018-07-251-4/+4
| | | | | | c83a84a fix segfault when passed blobmsg attr is NULL Signed-off-by: John Crispin <john@phrozen.org>
* ipq40xx: move essedma patches into same rangeJohn Crispin2018-07-253-9/+11
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ipq40xx: sync kernel configJohn Crispin2018-07-251-5/+3
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ipq40xx: use patches that were sent upstreamJohn Crispin2018-07-2527-296/+510
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ipq40xx: move dts file patches to end of seriesJohn Crispin2018-07-257-168/+168
| | | | Signed-off-by: John Crispin <john@phrozen.org>