aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* odhcpd: optimize syslog priority valuesHans Dedecker2019-12-161-3/+3
| | | | | | e53fec8 treewide: optimize syslog priority values Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* lantiq: remove redundant WiFi LED on FRITZ!Box 7320Manuel Kock2019-12-141-3/+0
| | | | | | | | | | The led wireless trigger is already set correctly to phy0tpt through the alias in the device tree. Signed-off-by: Manuel Kock <github.web@manu.li> [rephrased commit title] Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 509894cffb7ec24ac21a381bed3c035efce42aeb)
* mpc85xx: add support for Enterasys WS-AP3710iDavid Bauer2019-12-147-0/+310
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: NXP P1020 (2x e500 @ 800MHz) RAM: 256M DDR3 (Micron) FLASH: 32M NOR (Spansion S29GL128S) BTN: 1x Reset WiFi: 1x Atheros AR9590 2.4 bgn 3x3 2x Atheros AR9590 5.0 an 3x3 ETH: 1x Gigabit Ethernet (Atheros AR8033) LED: System (green/red) - Radio{0,1} (green) LAN (connected to PHY) - GE blue - FE green Serial is a Cisco-compatible RJ45 next to the ethernet port. 115200-N-8 are the settings for OS and U-Boot. Installation ------------ 1. Grab the OpenWrt initramfs, rename it to 01C8A8C0.img. Place it in the root directory of a TFTP server and serve it at 192.168.200.200/24. 2. Connect to the serial port and boot the AP. Stop autoboot in U-Boot by pressing Enter when prompted. Credentials are identical to the one in the APs interface. By default it is admin / new2day. 3. Set the bootcmd so the AP can boot OpenWrt by executing $ setenv boot_openwrt "setenv bootargs; cp.b 0xee000000 0x1000000 0x1000000; bootm 0x1000000" $ setenv bootcmd "run boot_openwrt" $ saveenv If you plan on going back to the vendor firmware - the bootcmd for it is stored in the boot_flash variable. 4. Load the initramfs image to RAM and boot by executing $ tftpboot 0x1000000 192.168.200.200:01C8A8C0.img; bootm 5. Make a backup of the "firmware" partition if you ever wish to go back to the vendor firmware. 6. Upload the OpenWrt sysupgrade image via SCP to the devices /tmp folder. 7. Flash OpenWrt using sysupgrade. $ sysupgrade -n /tmp/openwrt-sysupgrade.bin Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 16b01fb1b9c99513c318109bef96a1a3545c57a0)
* glibc: update to latest 2.27 commit (BZ #2503, BZ #2504)Hans Dedecker2019-12-141-2/+2
| | | | | | | | bef0b1cb31 libio: Disable vtable validation for pre-2.1 interposed handles [BZ #25203] 4d5cfeb510 rtld: Check __libc_enable_secure before honoring LD_PREFER_MAP_32BIT_EXEC (CVE-2019-19126) [BZ #25204] 92f04eedb5 mips: Force RWX stack for hard-float builds that can run on pre-4.8 kernels Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* glibc: backport fix for regexec buffer read overrunAlin Nastac2019-12-141-0/+26
| | | | | | | | | | | | | | | | | | | Problem found by AddressSanitizer[1]: Latest `grep` (git commit 1019e6e) compiled with asan may cause a heap-buffer-overflow when `-i` is specified. ./grep -i '\(\(\)*.\)*\(\)\(\)\1' /bin/chvt ================================================================= ==16206==ERROR: AddressSanitizer: heap-buffer-overflow on address 1. https://debbugs.gnu.org/34140 Ref: https://sourceware.org/bugzilla/show_bug.cgi?id=24114 Signed-off-by: Alin Nastac <alin.nastac@gmail.com> [commit title and description facelift] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* glibc: update to latest 2.27 commit (BZ#23637)Hans Dedecker2019-12-141-2/+2
| | | | | | | | | | | | 5b4f7382af Add undef to fix test failure. 9456483fb2 Improve performance of memmem 373f8b06a3 Improve performance of strstr 4ec1b9e913 Fix strstr bug with huge needles (bug 23637) ecd6271ed8 Speedup first memmem match bba6b9288f Simplify and speedup strstr/strcasestr first match 7a4da6ef7a Improve strstr performance Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* glibc: update to latest 2.27 commit (BZ #24228, BZ #24744, BZ #24699)Hans Dedecker2019-12-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | 5f0d2e0491 [AArch64] Add ifunc support for Ares e6b7252040 aarch64,falkor: Use vector registers for memcpy c74b884f70 aarch64,falkor: Ignore prefetcher tagging for smaller copies 0fc5934ebd aarch64/strncmp: Use lsr instead of mov+lsr e0a0bd3acc aarch64/strncmp: Unbreak builds with old binutils 638caf3000 aarch64: Improve strncmp for mutually misaligned inputs d5f45a29ff aarch64/strcmp: fix misaligned loop jump target 7f690fafad aarch64: Improve strcmp unaligned performance 40df047b3b aarch64: Fix branch target to loop16 062139f233 aarch64: Optimized memcmp for medium to large sizes f3e2add213 aarch64: Use the L() macro for labels in memcmp 22bd3ab40e posix: Fix large mmap64 offset for mips64n32 (BZ#24699) bdd16894aa aarch64: handle STO_AARCH64_VARIANT_PCS 0b48caab9a aarch64: add STO_AARCH64_VARIANT_PCS and DT_AARCH64_VARIANT_PCS 949da7f2fd io: Remove copy_file_range emulation [BZ #24744] f056ac8363 libio: do not attempt to free wide buffers of legacy streams [BZ #24228] 5f90e009b1 NEWS: add entries for bugs 22964, 24180, and 24531 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ath79: add support for TP-Link TL-WDR4300 v1 (IL)Adrian Schmutzler2019-12-134-0/+21
| | | | | | | | | The TL-WDR4300 v1 sold in Israel has a different TPLINK_HWID. Thanks to Josh4300 for testing on device. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit c642a97aa6b51352a718449cd715b92f94af4a5d)
* ramips: allow JCG_MAXSIZE in kiB in Build/jcg-headerAdrian Schmutzler2019-12-132-2/+4
| | | | | | | | | | | | | | | This allows JCG_MAXSIZE to be specified in kilobytes. This makes this value more consistent and easier comparable with other size variables. This also changes the only occurence of the variable, for Cudy WR1000. This is backported to 19.07 for convenience, as other developers backporting device support might not be aware that JCG_MAXSIZE in kilobytes would not work there. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 0bf4d681d4f2e4bd3c3a61e7fe5dca2a40b1902f)
* brcm47xx: add switch configuration for WNR3500LOlli Asikainen2019-12-111-1/+2
| | | | | | | | | | | | | | | | | | | | | Netgear WNR3500L is an already supported device, but out of the box, the device has no switch configuration and there is no wan. The correct configuration for this specific model is similar to some other models. This simple commit adds the correct switch and the out-of-the-box experience is improved. Experimentally determined: Port 0 => WAN Port 1..4 => LAN Port 5..7 => unused Port 8 => CPU Signed-off-by: Olli Asikainen <olli.asikainen@gmail.com> Tested-by: Fabian Zaremba <fabian@youremail.eu> [added port mapping to commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit deb835849aeb713968aaa48bf046101140ab4825)
* ramips: fix number of LAN Ports for Mikrotik RBM33GMartin Schiller2019-12-111-1/+4
| | | | | | | | | The Mikrotik RBM33G has only 2 LAN ports. Signed-off-by: Martin Schiller <ms@dev.tdt.de> [moved node in 02_network to maintain alphabetic sorting; backport] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 3a55c7935d4efdc86575601cb4aa7bc94e3c5e44)
* ramips: fix switch port order for TP-Link Archer C20iWalter Sonius2019-12-111-1/+1
| | | | | | | | | | | | | | | | | | | Physical port order watched from the backside of the C20i (from left to right) is: Internet / 1 / 2 / 3 / 4 Physical Port Switch port WAN 0 LAN 3 1 LAN 4 2 LAN 1 3 LAN 2 4 (not used) 5 CPU 6 Signed-off-by: Walter Sonius <walterav1984@gmail.com> [commit message/title improvements; backport to 19.07] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit a065cd29bf2dfd1ce1f07becd65aef96cec658e7)
* ath10k-firmware: update Candela Tech firmware imagesKoen Vandeputte2019-12-101-24/+24
| | | | | | | | | | | | | | | The release notes since last time for wave-1: * November 29, 2019: Fix IBSS merge issue, related to TSF id leakage bug in firmware code. Thanks for Ahmed Zaki @ Mage-Networks for helping to diagnose and test. The release notes since last time for wave-2: * December 6, 2019: Fix 160Mhz problem caused by logic that did not take into account the fact that 160Mhz has only 1/2 of the NSS of lower bandwidths in the rate table. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit 30109782df3c74becd60dd13216346e1ea2fcc96)
* kernel: bump 4.14 to 4.14.158Koen Vandeputte2019-12-1021-42/+42
| | | | | | | | | | | | Refreshed all patches. Altered patches: - 400-mtd-add-rootfs-split-support.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mac80211: unify setup of iw htmode for mesh and adhocSantiago Piccinini2019-11-301-49/+16
| | | | | | | | | | This also fixes mac80211_prepare_vif iw set channel in monitor or mesh mode. Signed-off-by: Santiago Piccinini <spiccinini@altermundi.net> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [daniel@makrotopia.org: fixed commit message] (cherry picked from commit c7fb12beb1d347f1cedc7890dbe2d441f70ccf62)
* ucert: update to latest git HEADDaniel Golle2019-11-301-3/+3
| | | | | | | | | | | | | e4bd927 cast ucert_argv to proper type when passing to execv Fixes warnings: warning: passing argument 2 of 'execv' from incompatible pointer type [-Wincompatible-pointer-types] 254 | execv(usign_argv[0], usign_argv) Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 9c272dd3e42a51c1343ed4fad54ac38bb97349dd)
* OpenWrt v19.07.0-rc2: revert to branch defaultsHauke Mehrtens2019-11-305-11/+9
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v19.07.0-rc2: adjust config defaultsv19.07.0-rc2Hauke Mehrtens2019-11-305-9/+11
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* generic ar8xxx: increase VLAN table for AR83x7David Bauer2019-11-303-9/+13
| | | | | | | | | | | | | The Atheros AR8327 and AR8337 have (according to their datasheet) a VLAN table with a maximum of 4096 entries. Currently, there's a hard limit of 128 VLANs, which is the same as for most other Atheros switches. Increase this limit only for the AR83x7 series and modify some shared functions to allow them to work with a variable max VLAN count. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 3f79aaa2979793c054eae2c8b4058c8c7fccdbe7)
* busybox: add glibc dependency for vi regex optionSatadru Pramanik2019-11-301-1/+2
| | | | | | | | | | | | | | | | | | | Build with musl libc fails with BUSYBOX_DEFAULT_FEATURE_VI_REGEX_SEARCH enabled. Enabling BusyBox's vi regex search option depends upon GNU regex. Musl libc does not support GNU regex[1]. So this patch adds explicit dependency on GNU libc and while at it remove the FIXME comment. 1. https://wiki.musl-libc.org/functional-differences-from-glibc.html Ref: https://dev.archive.openwrt.org/ticket/21741.html Ref: https://forum.openwrt.org/t/busybox-not-compiling/ Ref: https://github.com/openwrt/packages/issues/4453 Signed-off-by: Satadru Pramanik <satadru@umich.edu> [commit subject/description tweaks, From: fix, USE_GLIBC fix, removed comments] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit f1410902e6c089a53935ab44e83207e877445bc5)
* usign: Activate LTO compile optionHauke Mehrtens2019-11-301-0/+3
| | | | | | | | | | | | | This decreases the size of the usign application by 16% on MIPS BE. old: 24,597 /usr/bin/usign new: 20,501 /usr/bin/usign Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 6ffd8a8f92ab5337ab967ab2922d7de7f0480bc9)
* swconfig: Activate LTO compile optionHauke Mehrtens2019-11-301-0/+3
| | | | | | | | | | | | | This decreases the size of the swconfig application by 25% on MIPS BE. old: 16,916 /sbin/swconfig new: 12,565 /sbin/swconfig Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit e926681387891fe9af89d884ebc3dce4c8c7f450)
* mtd: Activate LTO compile optionHauke Mehrtens2019-11-301-1/+2
| | | | | | | | | | | | | This decreases the size of the mtd application by 25% on MIPS BE. old: 20,597 /sbin/mtd new: 16,421 /sbin/mtd Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 1eb34b7287ed97ad1e2ae60a436babbb5c68076f)
* ramips: disable ZyXel Keenetic by defaultJo-Philipp Wich2019-11-301-0/+1
| | | | | | | | Disable the ZyXel Keenetic images by default as the device has insufficient flash space for release build images. Ref: https://forum.openwrt.org/t/devices-too-big-to-save-overlay/18161/72 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: disable WR512-3GN 4MB variant by defaultJo-Philipp Wich2019-11-301-0/+1
| | | | | | | | Disable the WR512-3GN 4MB image by default as the device has insufficient flash space for release build images. Ref: https://forum.openwrt.org/t/devices-too-big-to-save-overlay/18161/72 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: disable A5-V11 by defaultJo-Philipp Wich2019-11-301-0/+1
| | | | | | | | Disable the A5-V11 image by default as the device has insufficient flash space for release build images. Ref: https://forum.openwrt.org/t/devices-too-big-to-save-overlay/18161/72 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: disable TP-Link TL-WA855RE by defaultJo-Philipp Wich2019-11-301-0/+1
| | | | | | | | Disable the TP-Link TL-WA855RE image by default as the device has insufficient flash space for release build images. Ref: https://forum.openwrt.org/t/devices-too-big-to-save-overlay/18161/72 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* brcm47xx: disable Linksys E1000 v1 by defaultJo-Philipp Wich2019-11-301-0/+1
| | | | | | | | Disable the Linksys E1000 v1 image by default as the device has insufficient flash space for release build images. Ref: https://forum.openwrt.org/t/devices-too-big-to-save-overlay/18161/72 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: disable TP-Link TL-WA750RE by defaultJo-Philipp Wich2019-11-301-0/+1
| | | | | | | | Disable the TP-Link TL-WA750RE image by default as the device has insufficient flash space for release build images. Ref: https://forum.openwrt.org/t/devices-too-big-to-save-overlay/18161/30 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: disable TP-Link TL-WA850RE by defaultJo-Philipp Wich2019-11-301-0/+1
| | | | | | | | Disable the TP-Link TL-WA850RE image by default as the device has insufficient flash space for release build images. Ref: https://forum.openwrt.org/t/devices-too-big-to-save-overlay/18161/30 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: disable TP-Link TL-WR840N v5 by defaultJo-Philipp Wich2019-11-291-0/+1
| | | | | | | | Disable the TP-Link TL-WR840N v5 image by default as the device has insufficient flash space for release build images. Ref: https://forum.openwrt.org/t/devices-too-big-to-save-overlay/18161/29 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: disable Sitecom WL-351 by defaultJo-Philipp Wich2019-11-291-0/+1
| | | | | | | | Disable the Sitecom WL-351 image by default as the device has insufficient flash space for release build images. Ref: https://forum.openwrt.org/t/devices-too-big-to-save-overlay/18161/24 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: disable D-Link DIR-645 by defaultJo-Philipp Wich2019-11-291-0/+1
| | | | | | | | Disable the D-Link DIR-645 image by default as the device has insufficient flash space for release build images. Ref: https://forum.openwrt.org/t/devices-too-big-to-save-overlay/18161/23 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: disable D-Link DIR-300 B5/B6/B7 by defaultJo-Philipp Wich2019-11-291-0/+1
| | | | | | | | Disable the D-Link DIR-300 B5/B6/B7 image by default as the device has insufficient flash space for release build images. Ref: https://forum.openwrt.org/t/devices-too-big-to-save-overlay/18161/18 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: disable Netgear WNR2000v4 by defaultJo-Philipp Wich2019-11-291-0/+1
| | | | | | | | Disable the Netgear WNR2000v4 image by default as the device has insufficient flash space for release build images. Ref: https://forum.openwrt.org/t/devices-too-big-to-save-overlay/18161/11 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: disable On Networks N150R by defaultJo-Philipp Wich2019-11-291-0/+1
| | | | | | | | Disable the On Networks N150R image by default as the device has insufficient flash space for release build images. Ref: https://forum.openwrt.org/t/devices-too-big-to-save-overlay/18161/10 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: disable TP-Link TL-WA850RE v2 by defaultJo-Philipp Wich2019-11-291-0/+1
| | | | | | | | Disable the TP-Link TL-WA850RE v2 image by default as the device has insufficient flash space for release build images. Ref: https://forum.openwrt.org/t/devices-too-big-to-save-overlay/18161/9 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: disable Netgear WNR612 v2 by defaultJo-Philipp Wich2019-11-291-0/+1
| | | | | | | | Disable the Netgear WNR612 v2 image by default as the device has insufficient flash space for release build images. Ref: https://forum.openwrt.org/t/devices-too-big-to-save-overlay/18161/4 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: disable ASUS RT-N10+ B1 by defaultJo-Philipp Wich2019-11-291-0/+1
| | | | | | | | Disable the ASUS RT-N10+ B1 image by default as the device has insufficient flash space for release build images. Ref: https://forum.openwrt.org/t/devices-too-big-to-save-overlay/18161/1 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: bump 4.14 to 4.14.156Koen Vandeputte2019-11-2926-67/+67
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* config: kernel: fix typo in HFSPLUG_FS_POSIX_ACLStijn Tintel2019-11-281-1/+1
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 5f6833395293548f9fdf4897d9766417f2990bac)
* uboot-envtools: ath79: add support for YunCore XD4200 and A782Piotr Dymacz2019-11-261-1/+3
| | | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> (cherry picked from commit 5d2a900163d0a161e6fa5e63436b57deea31287e)
* ath79: add support for YunCore XD4200 and A782Piotr Dymacz2019-11-266-1/+211
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | YunCore XD4200 ('XD4200_W6.0' marking on PCB) is Qualcomm/Atheros based (QCA9563, QCA9886, QCA8334) dual-band, Wave-2 AC1200 ceiling AP with PoE (802.3at) support. A782 model ('T750_V5.1' marking on PCB) is a smaller version of the XD4200, with similar specification but lower TX power. Specification: - QCA9563 (775 MHz) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 2x 10/100/1000 Mbps Ethernet (QCA8334), with 802.3at PoE support (WAN) - Wi-Fi 2.4 GHz: - XD4200: 2T2R (QCA9563), with ext. PA (SKY65174-21) and LNA - A782: 2T2R (QCA9563), with ext. FEM (SKY85329-11) - Wi-Fi 5 GHz: - XD4200: 2T2R (QCA9886), with ext. FEM (SKY85728-11) - A782: 2T2R (QCA9886), with ext. FEM (SKY85735-11) - LEDs: - XD4200: 5x (2x driven by SOC, 1x driven by AC radio, 2x Ethernet) - A782: 3x (1x RGB, driven by SOC and radio, 2x Ethernet) - 1x button (reset) - 1x UART (4-pin, 2.54 mm pitch) header on PCB - 1x DC jack (12 V) Flash instructions: If your device comes with generic QSDK based firmware, you can login over telnet (login: root, empty password, default IP: 192.168.188.253), issue first (important!) 'fw_setenv' command and then perform regular upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download image to the device, SSH server is not available): fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin In case your device runs firmware with YunCore custom GUI, you can use U-Boot recovery mode: 1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with 'tftp' image renamed to 'upgrade.bin' 2. Power the device with reset button pressed and release it after 5-7 seconds, recovery mode should start downloading image from server (unfortunately, there is no visible indication that recovery got enabled - in case of problems check TFTP server logs) Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> (backported from commit e5d4c0966736287c7ade29c5ccaf6f1ad841b7db)
* ath79: add support for YunCore TFTP image generationVincent Wiemann2019-11-262-0/+15
| | | | | | | | | | | | | | | | | | | YunCore QCA9k based devices released in 2019 require a custom TFTP image for U-Boot built-in recovery mode (triggered with reset button). Image has to be prepended with 'YUNCORE' keyword followed by U-Boot CLI commands which will be executed later. Images without the custom header will be ignored by U-Boot. To be able to support both the vendor firmware (QSDK) and OpenWrt flash layouts, used here commands change the 'bootcmd' before flashing image. This commit adds generic helper script for YunCore devices with 16 MB of flash and enables TFTP image generation for A770 model. Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com> [pepe2k@gmail.com: commit description reworded, recipe renamed] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> (cherry picked from commit 8016f648640e8f73f0dc4fc307fb6bebd12afb88)
* ath79: Add support for TP-Link Archer C60 v2Adrian Schmutzler2019-11-265-2/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link Archer C60 v2 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561 + QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Flash instruction (WebUI): Download *-factory.bin image and upload it via the firmwary upgrade function of the stock firmware WebUI. Flash instruction (TFTP): 1. Set PC to fixed IP address 192.168.0.66 2. Download *-factory.bin image and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery Flash instruction (under U-Boot, using UART): tftp 0x81000000 ...-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize reset Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 974d6958a7c6332438ab4cda98e72156c8d944ed)
* ath79: Add support for TP-Link Archer C60 v1Adrian Schmutzler2019-11-266-1/+183
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Flash instruction (WebUI): Download *-factory.bin image and upload it via the firmwary upgrade function of the stock firmware WebUI. Flash instruction (TFTP): 1. Set PC to fixed ip address 192.168.0.66 2. Download *-factory.bin image and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 ...-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. reset Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 6d313da6dc5f655d92aa86e2ec42ecfcf763df3d)
* base-files: config_generate: split macaddr with multiple ifacesSungbo Eo2019-11-262-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | netifd does not handle network.@device[x].name properly if it contains multiple ifaces separated by spaces. Due to this, board.d lan_mac setup does not work if multiple ifaces are set to LAN by ucidef_set_interface_lan. To fix this, create a device node for each member iface when running config_generate instead. Those are named based on the member ifname: ucidef_set_interface_lan "eth0 eth1.1" ucidef_set_interface_macaddr "lan" "yy:yy:yy:yy:yy:01" will return config device 'lan_eth0_dev' option name 'eth0' option macaddr 'yy:yy:yy:yy:yy:01' config device 'lan_eth1_1_dev' option name 'eth1.1' option macaddr 'yy:yy:yy:yy:yy:01' ref: https://github.com/openwrt/openwrt/pull/2542 Signed-off-by: Sungbo Eo <mans0n@gorani.run> [always use new scheme, extend description, change commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 298814e6be7640d89328de9e7c90d4349e30683f)
* ar71xx: ubnt-(xm,xw): add rssileds packageLech Perczak2019-11-261-2/+8
| | | | | | | | | | | | | | | | | | | In order to make RSSI indicator on the device work out of box, include "rssileds" package in per-device rootfs image by default for Ubiquiti XM and XW devices, namely: - Bullet M (XM/XW) - Rocket M (XM/XW) - Nanostation M (XM/XW) - Nanostation Loco-M (XW) This moves the package addition to the individual devices in order to prevent accidental inclusions of the package when not looking at the parent node carefully enough. Signed-off-by: Lech Perczak <lech.perczak@gmail.com> [add bullet-m-xw, remove rocket-m-ti, extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 08d9c95417399ac8615df210f4381cca68a4b25c)
* ath79: add PoE passthrough switch for Ubiquiti Nanostation (XM/XW)Adrian Schmutzler2019-11-261-0/+6
| | | | | | | | | | | | | | This adds the gpio switch to enable PoE passthrough on Ubiquiti Nanostation (XM/XW). Values are copied from the implementation in ar71xx. GPIO values checked on: - NanoStation M5 XW - NanoStation M2 XM Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 317e98a5a2c6f1e2ac599ec530478669b965602c)
* uboot-envtools: ramips: add support for ALFA Network Quad-E4GPiotr Dymacz2019-11-241-0/+1
| | | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> (cherry picked from commit 10bcf1eb40b728b3583c1a7693111f27a9801dc5)
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-17 17:59:49 +0000