aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* image: remove duplicate cameo-factorySebastian Kemper2018-12-171-12/+0
| | | | | | The function was accidentally added twice. Remove the duplicate. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
* ipq40xx: GL-B1300: convert to new partitions layoutChristian Lamparter2018-12-171-52/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | Alberto Bursi reported: >The patch "ipq40xx: specify "firmware" partition format for GL.iNet GL-B1300" >prevents boot on my B1300. I compiled from latest sources. The GL-B1300 was using the discouraged direct subnodes method to declare the partitions on the flash. |The partition table should be a subnode of the flash node and should be named |'partitions'. This node should have the following property: |- compatible : (required) must be "fixed-partitions" |Partitions are then defined in subnodes of the partitions node. | |For backwards compatibility partitions as direct subnodes of the flash device are |supported. This use is discouraged. |NOTE: also for backwards compatibility, direct subnodes that have a compatible |string are not considered partitions, as they may be used for other bindings. <https://www.kernel.org/doc/Documentation/devicetree/bindings/mtd/partition.txt> Hence, this patch converts the device to the "partitions" layout. Fixes: 1cbe457cf94 ("ipq40xx: specify "firmware" partition format for GL.iNet GL-B1300") Reported-by: Alberto Bursi <bobafetthotmail@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: dts: Remove newly added default-state=off propertyChristian Lamparter2018-12-171-10/+0
| | | | | | I'm afraid that this will be "one of many" patches to come. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ar71xx/ath79: switch devices to the -ct driver and firmwareChristian Lamparter2018-12-173-5/+5
| | | | | | | Since commit 61b5b4971e7 ("mac80211: make ath10k-ct the default ath10k") select ath10k-ct and the -ct firmwares by default. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* bcm53xx: include WiFi firmware for devices with 4366C0Rafał Miłecki2018-12-171-1/+1
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* linux-firmware: broadcom: package 4366C0 FullMAC firmwareRafał Miłecki2018-12-171-0/+9
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* linux-firmware: update to the commit from 2018-12-16Rafał Miłecki2018-12-171-3/+3
| | | | | | It includes e.g. new Broadcom FullMAC firmwares for 4366B1 and 4366C0. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport ifconfig ioctl support for class e addressesKevin Darbyshire-Bryant2018-12-173-0/+237
| | | | | | | | | | | | | | | | | Backport net: Allow class-e address assignment via ifconfig ioctl While most distributions long ago switched to the iproute2 suite of utilities, which allow class-e (240.0.0.0/4) address assignment, distributions relying on busybox, toybox and other forms of ifconfig cannot assign class-e addresses without this kernel patch. While CIDR has been obsolete for 2 decades, and a survey of all the open source code in the world shows the IN_whatever macros are also obsolete... rather than obsolete CIDR from this ioctl entirely, this patch merely enables class-e assignment, sanely. https://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git/commit/?id=65cab850f0eeaa9180bd2e10a231964f33743edf Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* netifd: support configuring class e 240.0.0.0/4 addressesKevin Darbyshire-Bryant2018-12-171-3/+3
| | | | | | cd089c5 proto: Support class-e addressing in netifd Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* treewide: dts: Remove default-state=off property from all gpio LED nodesPetr Štetiar2018-12-1772-233/+0
| | | | | | | | | | | | | | | | | | >From the Documentation/devicetree/bindings/leds/common.txt: - default-state : The initial state of the LED. Valid values are "on", "off", and "keep". If the LED is already on or off and the default-state property is set the to same value, then no glitch should be produced where the LED momentarily turns off (or on). The "keep" setting will keep the LED at whatever its current state is, without producing a glitch. The default is off if this property is not present. So setting the default-state of the LEDs to `off` is redundant as `off` is default LED state anyway. We should remove it as almost every new PR/patch submission contains this property by default which seems to be just copy&paste from some DTS file already present in the tree. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: add support for TP-Link Archer A7Karl-Felix Glatzer2018-12-177-1/+314
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for TP-Link Archer A7 Specification: - SOC: QCA9563 - Flash: 16 MiB (SPI) - RAM: 128 MiB (DDR2) - Ethernet: 4x 1Gbps LAN + 1x 1Gbps WAN - Wireless: - 2.4GHz (bgn) SoC internal - 5GHz (ac) QCA988x - USB: 1x USB 2.0 port - Button: 1x power, 1x reset, 1x wps - LED: 10x LEDs - UART: holes in PCB - Vcc, GND, RX, TX from ethernet port side - 115200n8 Flash instructions: Upload openwrt-ath79-generic-tplink_archer-a7-v5-squashfs-factory.bin via the Webinterface. Flash instruction using tftp recovery: 1. Connect the computer to one of the LAN ports of the Archer A7 2. Set the computer IP to 192.168.0.66 3. Start a tftp server with the OpenWrt factory image in the tftp root directory renamed to ArcherC7v5_tp_recovery.bin 2. Connect power cable to Archer A7, press and hold the reset button and turn the router on 3. Keep the reset button pressed for ~5 seconds 4. Wait ~150 seconds to complete flashing Changes since first revision: - Flash instructions using stock image webinterface - Changed "Version 5" in model string to "v5" - Split DTS file in qca9563_tplink_archer-x7-v5.dtsi and qca9563_tplink_archer-a7-v5.dts - Firmware image is now build with dynamic partitioning - Default to ath10k-ct Changes since second revision: - Changed uboot@0 to uboot@20000 in DTS file - Fixed ordering issue in board led script - Specify firmware partition format in DTS file - Rebased Makefile device definition on common Device/tplink-safeloader-uimage definition - Merged switch section in network script (same configuration as tplink,tl-wdr3600 and tplink,tl-wdr4300) Signed-off-by: Karl-Felix Glatzer <karl.glatzer@gmx.de>
* ath79, brcm63xx: Fix debounce-interval properties in gpio-keys-polled nodesPetr Štetiar2018-12-1770-71/+181
| | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes wrong usage of debounce-interval subnode property of gpio-keys-polled nodes, which was used inproperly in parent node, but it belongs to the subnodes, excerpt from the docs: Optional subnode-properties: - debounce-interval: Debouncing interval time in milliseconds. If not specified defaults to 5. And the docs are up to date as the source code matches that description as well: if (fwnode_property_read_u32(child, "debounce-interval", &button->debounce_interval)) button->debounce_interval = 5; While at it, I've also re-formatted gpio-keys-polled nodes, usually just adding new lines after every key subnode. Cc: Tomasz Maciej Nowak <tomek_n@o2.pl> Cc: Matt Merhar <mattmerhar@protonmail.com> Cc: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: ag71xx: Fix code formatting in ag71xx_probePetr Štetiar2018-12-171-2/+2
| | | | Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: ag71xx: Unify debug output with ar71xx and make debugging easierPetr Štetiar2018-12-171-16/+32
| | | | | | | | | Currently it's quite hard to diff debugging output between ar71xx and ath79, so this patch tries to improve it by adding the same ag71xx_dump_regs function and placing debugging output from the registers to relatively same places. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ar71xx: ag71xx: Replace duplicate debugging code with simple function callPetr Štetiar2018-12-171-16/+1
| | | | | | | ag71xx_dump_regs is used in code several times, and is providing same output. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* scripts/qemustart: more compact rand_mac()Yousong Zhou2018-12-171-1/+1
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ipq806x: drop kernel/ rootfs partition images for the ZyXEL NBG6817Stefan Lippers-Hollmann2018-12-171-3/+1
| | | | | | | | | | | | | Since commit 8e9a59a6b924469c0061d4bd945ae0c6dbfdecfe (build: add mkrasimage) a proper factory image can be provided for the ZyXEL NBG6817, which can be flashed from the OEM firmware or used for tftp based push-button recovery, therefore the previously used partition images for mmcblk0p5-rootfs.bin and mmcblk0p4-kernel.bin are no longer required (and using them properly has always been slightly difficult and risky) and can now be dropped from the image generation code. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* ath79: add d-link dir-825-c1 and dir-835-a1Sebastian Kemper2018-12-178-8/+344
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit ports both dir-825-c1 and dir-835-a1 from ar71xx to ath79. They're pretty much identical, except dir-835-a1 has less LEDs. The routers come with 128 MByte of RAM and 16 MBytes of flash and sport 2.4GHz and 5.0GHz wireless. Both routers have entries already in OpenWrt's TOH. Please check there for more information on these antiquities. https://openwrt.org/toh/hwdata/d-link/d-link_dir-825_c1 https://openwrt.org/toh/hwdata/d-link/d-link_dir-835_a1 Installation: 1. Connect to the web interface of the vendor firmware (usually listening on 192.168.0.1). 2. Go to "Tools", then "Firmware". 3. In the "Firmware Upgrade" box click "Browse". 4. Select the OpenWrt factory image for your router. 5. Click "Upload", confirm the popups if you agree to flash the file you selected. 6. Wait for firmware upgrade to complete. It takes about 5 minutes. Run-tested on dir-825-c1. dir-835-a1 should work as well, but I don't have this router so I can't confirm. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [trivial changes]
* image: add cameo-factory commandSebastian Kemper2018-12-171-0/+12
| | | | | | | | | | | This command enables factory image generation for Cameo boards. On upgrade the vendor firmware will check the size of the provided image and if a specific string is located at the end of the binary. cameo-factory will generate an image that the vendor firmware accepts. Tested on a D-Link DIR-825 C1 with vendor firmwares 3.01 and 3.04. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
* ipq40xx: device-tree overhaulChristian Lamparter2018-12-1714-145/+156
| | | | | | | | | | | | - replace licence texts with SPDX-License-Identifier where applicable. - make node-names more generic to fit with Device-Tree Release v0.2 Section 2.2.2 Generic Names Recommendation. - utilize wifi0/1, blsp1_uart1 labels Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: specify "firmware" partition format for EnGenius EAP1300Christian Lamparter2018-12-171-0/+1
| | | | | | | Specify firmware partition format by compatible string. Cc: Steven Lin <steven.lin@senao.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: specify "firmware" partition format for GL.iNet GL-B1300Christian Lamparter2018-12-171-0/+1
| | | | | | Specify firmware partition format by compatible string. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: specify "firmware" partition format for Compex WPJ428Christian Lamparter2018-12-171-0/+1
| | | | | | Specify firmware partition format by compatible string. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: specify "firmware" partition format for ZyXEL WRE6606Christian Lamparter2018-12-171-0/+1
| | | | | | Specify firmware partition format by compatible string. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: specify "firmware" partition format for Netgear EX61[50]0v2Christian Lamparter2018-12-171-0/+1
| | | | | | | Specify firmware partition format by compatible string. Cc: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: specify "firmware" partition format for AVM Fritz!Box 4040Christian Lamparter2018-12-171-0/+1
| | | | | | Specify firmware partition format by compatible string. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: add DT binding support to the fit parserChristian Lamparter2018-12-171-0/+6
| | | | | | It allows specifying default and Netgear parsers directly in the DT. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* base-files: Fix netdev led triggerHauke Mehrtens2018-12-161-1/+4
| | | | | | | | | | In the upstream netdev led trigger the one mode file was replaced by 3 files named rx, tx and link. Fix the netdev trigger configuration code to use the modified API. Fixes: aa3b6a08c56 ("kernel: Replace ledtrig-netdev with upstream backport") Reported-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* omcproxy: use PROJECT_GIT in PKG_SOURCE_URLHans Dedecker2018-12-161-1/+1
| | | | | | Switch PKG_SOURCE_URL to git.openwrt.org Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* Revert "elfutils: install library files for pkg-config"Kevin Darbyshire-Bryant2018-12-161-3/+0
| | | | | | | | | | | | This reverts commit 216397b8124dafafbd79afdf9f8e716b55775194. Due to: Package ip-tiny is missing dependencies for the following libraries: libelf.so.1 Makefile:187: recipe for target '/var/lib/buildbot/slaves/slave-lede-builds4/mips_24kc/build/sdk/bin/packages/mips_24kc/base/ip-tiny_4.19.0-6_mips_24kc.ipk' failed Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* omcproxy: switch to OpenWrt github repoHans Dedecker2018-12-162-40/+5
| | | | | | | Switch to OpenWrt github repo in PKG_SOURCE_URL so we can remove the out of tree patch Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* gemini: Activate USB support againHauke Mehrtens2018-12-161-0/+1
| | | | | | | | | | | This activates the CONFIG_USB_SUPPORT option in the in the gemini kernel again which will provide the core USB support and makes it possible to compile the rest of the USB parts into modules. Without this change USB will not be available in the gemini target and some modules fail to compile because the feature list indicates USB support. Fixes: 10ec966f7ba7 ("gemini: Break out USB to packages") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: Make eapol-test depend on libubusHauke Mehrtens2018-12-161-3/+3
| | | | | | | | The eapol-test application also uses the code with the newly activated ubus support, add the missing dependency. Fixes: f5753aae233 ("hostapd: add support for WPS pushbutton station") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools/sdimage: Fix build with host Linux headers < 3.18Hauke Mehrtens2018-12-161-0/+13
| | | | | | | | The ufb tool needs the host UAPI Linux headers from kernel 3.18 or later, remove it for now as it is not used anyway. Fixes: 4bf5c4395b3 ("tools/sdimage: update to latest git version") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mbedtls: fix compilation on ARM < 6Hauke Mehrtens2018-12-161-0/+27
| | | | | | | | mbedtls uses some instructions introduced in ARMv6 which are not available in older architectures. Fixes: 3f7dd06fd85 ("mbedtls: Update to 2.14.1") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: add support for Netgear R6350NOGUCHI Hiroshi2018-12-165-2/+179
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Netgear R6350 is a wireless router, aka Netgear AC1750. Specification: - SoC: Mediatek MT7621AT (2 CPU cores, 4 threads) - RAM: 128MiB (Nanya NT5CC64M16GP-DI) - ROM: 128MiB NAND Flash (Macronix MX30LF1G18AC-TI) - Wireless: for 11b/g/n (upto 300Mbps): MT7603 for 11a/ac (upto 1450Mbps) : MT7615, is not avaliable now - Ethernet LAN speed: up to 1000Mbps - Ethernet LAN ports: 4 - Ethernet WAN speed: up to 1000Mbps - Ethernet WAN ports: 1 - USB ports: 1 (USB 2.0) - LEDs: 4 (all can be controlled by SoC's GPIO) - buttons: 2 - serial ports: unknown Installation through telnet: - Copy kernel.bin and rootfs.bin to a USB flash disk, plug to usb port on the router. - Enable telnet with link: http://192.168.1.1/setup.cgi?todo=debug (login if required, default: admin password) - You will see "Debug Enabled!" - Telnet 192.168.1.1 and login with "root" - ls /mnt/shares/ to find out path of your USB disk. 'myUdisk' for example. - cd /mnt/shares/myUdisk - mtd_write write rootfs.bin Rootfs - mtd_write write kernel.bin Kernel - reboot recovery when bricked: nmrpflash can be used to recover to the netgear firmware if a broken image was flashed. The SC_PART_MAP partition suggests that an on flash partition table exists. After implementing a partition parser/builder for the sercom partition format, the definitions don't match the flash layout used by the stock firmware. It either means the partition format has not yet been completely understood or it isn't used by the stock firmware. For now, use fixed partitions instead. Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com> [apply latest ramips changes and document the on flash partition map issues] Signed-off-by: Mathias Kresin <dev@kresin.me>
* jffs2: Fix use of uninitialized delayed_work, lockdep breakageDaniel Santos2018-12-164-2/+126
| | | | | | | | | | I've sent this one upstream. This patch is critical if you want to run with "prove lock correctness" (lockdep) and you happen to have certain mtd devices. The misuse of the uninitialized object is undefined behaviour, but being zeroed it does not appear to have actually broken anything other than the lockdep engine. Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
* tools/sdimage: update to latest git versionMichael Heimpold2018-12-161-3/+3
| | | | | | | This includes code cleanups and fixes some portability issues, compiler warnings about printf arguments etc. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* kernel/modules: HMC5843 3D-compass kernel module support enabled.Roman Bazalevsky2018-12-161-0/+17
| | | | Signed-off-by: Roman Bazalevsky <rvb@rvb.name>
* mbedtls: Update to 2.14.1Daniel Engberg2018-12-162-26/+26
| | | | | | | | | | | Update mbedtls to 2.14.1 This fixes: * CVE-2018-19608: Local timing attack on RSA decryption Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> [Update to 2.14.1] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* netfilter: Add fib support for nftablesBrett Mastbergen2018-12-164-0/+19
| | | | Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
* kernel: mv88e6060: disable hardware level MAC learningAnderson Luiz Alves2018-12-163-0/+132
| | | | | | | | | | | | | | | | Disable Marvell's hardware level MAC learning because it breaks station roaming. When enabled it drops all frames that arrive from a MAC address that is on a different port at learning table. Problem description: Multiple APs with inter-AP roaming connected to different ports, when station moves from one AP on one port to another AP on another port, traffic flow breaks down because the learning table is not updated. Signed-off-by: Anderson Luiz Alves <alacn1@gmail.com> [Replaced with upstream version, move to generic] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add mv88e61xx switch port-mirroring supportDeng Qingfang2018-12-162-6/+169
| | | | | | Compile & run tested on mvebu Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* mt76: fix dependenciesDeng Qingfang2018-12-161-1/+1
| | | | | | Only MT76x0U needs kmod-mt76x02-usb Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* swconfig: Add missing includeRosen Penev2018-12-162-1/+2
| | | | | | | | | Fixes these warnings: swlib.c:455:18: warning: implicit declaration of function 'isspace' swlib.c:461:9: warning: implicit declaration of function 'isdigit' Signed-off-by: Rosen Penev <rosenp@gmail.com>
* f2fs-tools: Update to 1.12.0Rosen Penev2018-12-163-2/+61
| | | | | | | | | | | Added two upstream mailing list patches that fix behavior under big endian systems. Issue was present since version 1.11.0. Tested on Turris Omnia. Original discussion: https://github.com/openwrt/openwrt/pull/1575 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* lantiq: add integer latency stat for lantiq-dslAndre Heider2018-12-161-0/+8
| | | | | | | The current stats always have a 'ms' suffix, and they're used by luci. Introduce dsl.latency_[down|up] values, exported in µs without suffix. Signed-off-by: Andre Heider <a.heider@gmail.com>
* rtl8812au: Add out-of-tree driver.Ben Greear2018-12-162-0/+68
| | | | | | | | | Use a forked version of the rtl8812au driver that works better with OpenWRT (fix compile bugs, fix phy MAC address, etc) Signed-off-by: Ben Greear <greearb@candelatech.com> [update to 2018-11-16, replace rtw_byteorder.h, rename folder] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* omcproxy: fix compilation on little-endian CPUsEneas U de Queiroz2018-12-162-1/+36
| | | | | | Don't use cpu_to_be32 outside of a function. Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
* ath79: add support for TP-Link TL-WR842N/ND v1 routerMarcin Jurkowski2018-12-154-0/+175
| | | | | | | | | | | | | | | | | | This ports support for TP-Link TL-WR842N/ND v1 from ar71xx. CPU: Atheros AR7241 400 MHz RAM: 32 MiB FLASH: 8 MiB PORTS: 4 Port 100/10 Switch, 1 Port 100/10 Wan WiFi: Atheros AR9287 LED: SYS, WiFi, LAN, WAN, 3G, QSS BTN: WiFi, Reset/WPS AR71xx target used "tl-mr3420" as board id so force flag is needed if upgrading from old target. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [trivial cleanup]
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 23:23:46 +0000