aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* lantiq: enable second VPE on Fritz!Box 7412David Bauer2019-08-112-2/+2
| | | | | | | | | | The AVM Fritz!Box 7412 does not use the VMMC part of the Lantiq chip but rather a proprietary solution based on the DECT chip for the FXS ports. Therefore, the second VPE can be enabled for use with OpenWrt. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 891a7007598d5d396bf621fcc6ab0cc083b192b6)
* lantiq: correct Fritz!Box 7412 button logic levelDavid Bauer2019-08-111-2/+2
| | | | | | | | | | The AVM FRITZ!Box 7412 buttons are both active low, which is currently incorrectly defined in the device-tree. This leads to the device booting directly into failsafe. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit c12947b39e96c82974cbe0fc3557259713f37770)
* lantiq: use wpad-basic for boards with enough storageJohann Neuhauser2019-08-111-2/+2
| | | | | | | | | | This commit selects wpad-basic for the FRITZ!Box 7312 and 7412 as wpad-mini is only selected on boards with small flash. Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de> [add short description] Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit c3c3cd5e4a86acfc83449c47c5f87779a800bdc7)
* odhcpd: fix lingering uloop socket descriptorHans Dedecker2019-08-101-3/+3
| | | | | | e9e8240 router: fix lingering uloop socket descriptor Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ar71xx: ag71xx: init rings with GFP_KERNELKoen Vandeputte2019-08-091-1/+1
| | | | | | | ar71xx got lost during final rebase .. Fixes: c8a6ce71e49c ("ar71xx/ath79: ag71xx: init rings with GFP_KERNEL") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx/ath79: ag71xx: init rings with GFP_KERNELKoen Vandeputte2019-08-091-1/+1
| | | | | | | | | | | | | | | Upstream commit 246902bdf562d45ea3475fac64c93048a7a39f01 Which contains following explanation: -- There is no need to use GFP_ATOMIC here, GFP_KERNEL should be enough. The 'kcalloc()' just a few lines above, already uses GFP_KERNEL. -- Looking at the code, all other descriptors also use plain GFP_KERNEL Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx/ath79: ag71xx: fix sleep in atomicKoen Vandeputte2019-08-092-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When enabling atomic-sleep-debugging options in the kernel, following splat is seen when disabling the interface (which happens on boot): [ 10.892878] eth0: link down [ 10.896788] BUG: sleeping function called from invalid context at net/core/dev.c:5563 [ 10.904730] in_atomic(): 1, irqs_disabled(): 1, pid: 425, name: ip [ 10.911004] 2 locks held by ip/425: [ 10.914539] #0: (rtnl_mutex){....}, at: [<80377474>] rtnetlink_rcv_msg+0x2d8/0x380 [ 10.922441] #1: (&(&ag->lock)->rlock){....}, at: [<80330158>] ag71xx_hw_disable+0x24/0x94 [ 10.930976] CPU: 0 PID: 425 Comm: ip Not tainted 4.14.136 #0 [ 10.936716] Stack : 805e0000 80589228 80557404 876998ec 80610000 80610000 87cdcafc 805b5327 [ 10.945233] 80551534 000001a9 8061386c 87699ccc 87cfb180 00000001 876998a0 84f70903 [ 10.953751] 00000000 00000000 80b00000 8769979c 6a7407fa 00000000 00000007 00000000 [ 10.962270] 000000b7 16d0954a 000000b6 00000000 80000000 87cb658c 87cb65b0 00000001 [ 10.970787] 8046f97c 87699ccc 87cfb180 87ff2810 00000003 802ce724 0806e098 80610000 [ 10.979306] ... [ 10.981797] Call Trace: [ 10.984287] [<8006cb0c>] show_stack+0x58/0x100 [ 10.988814] [<800aab34>] ___might_sleep+0x100/0x120 [ 10.993774] [<8035c434>] napi_disable+0x30/0xd8 [ 10.998377] [<80330198>] ag71xx_hw_disable+0x64/0x94 [ 11.003418] [<8033069c>] ag71xx_stop+0x24/0x38 [ 11.007959] [<80359e30>] __dev_close_many+0xcc/0x104 [ 11.013009] [<80362eac>] __dev_change_flags+0xc8/0x1ac [ 11.018227] [<80362fb8>] dev_change_flags+0x28/0x70 [ 11.023182] [<80376890>] do_setlink+0x31c/0x91c [ 11.027786] [<80379360>] rtnl_newlink+0x3ec/0x7f8 [ 11.032563] [<80377498>] rtnetlink_rcv_msg+0x2fc/0x380 [ 11.037799] [<8039a734>] netlink_rcv_skb+0xd4/0x178 [ 11.042754] [<80399d10>] netlink_unicast+0x168/0x250 [ 11.047796] [<8039a2d4>] netlink_sendmsg+0x3d8/0x434 [ 11.052841] [<8033f0e4>] ___sys_sendmsg+0x1dc/0x290 [ 11.057794] [<80340140>] __sys_sendmsg+0x54/0x84 [ 11.062495] [<8007212c>] syscall_common+0x34/0x58 This is caused by calling napi_disable() while holding the spinlock. Fix it by omitting the spinlock, which is not required here Extensively tested on GL-MiFi, RB-912 and RB-922 hardware Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.137Koen Vandeputte2019-08-097-12/+12
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* config: introduce separate CONFIG_SIGNATURE_CHECK optionJo-Philipp Wich2019-08-072-2/+6
| | | | | | | | | | | | | | | | | | | | Introduce a new option CONFIG_SIGNATURE_CHECK which defaults to the value of CONFIG_SIGNED_PACKAGES and thus is enabled by default. This option is needed to support building target opkg with enabled signature verification while having the signed package lists disabled. Our buildbots currently disable package signing globally in the buildroot and SDK to avoid the need to ship private signing keys to the build workers and to prevent the triggering of random key generation on the worker nodes since package signing happens off-line on the master nodes. As unintended side-effect, updated opkg packages will get built with disabled signature verification, hence the need for a new override option. Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit f565f276e2c06ac8f3176e0b16d6f2d40cd653d4)
* adb: fix build breakage on recent muslPetr Štetiar2019-08-071-0/+10
| | | | | | | | | | | | | | | | | | | Fix build breakage as upstream has removed implicit include of sys/sysmacros.h from sys/types.h: remove implicit include of sys/sysmacros.h from sys/types.h this reverts commit f552c792c7ce5a560f214e1104d93ee5b0833967, which exposed the sysmacros.h macros (device major/minor calculations) for BSD and GNU profiles to mimic an unintentional glibc behavior some code depended on. glibc has deprecated and since removed them as the resolution to bug #19239, so it makes no sense for us to keep this behavior. affected code should all have been fixed by now, and if it's not yet fixed it needs to be for use with modern glibc anyway. Ref: https://git.musl-libc.org/cgit/musl/commit/include/sys/types.h?id=a31a30a0076c284133c0f4dfa32b8b37883ac930 Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 79596f782e2c8daa1ebb8e480b6373c8142714c6)
* packages: apply usign padding workarounds to package indexes if neededJo-Philipp Wich2019-08-071-2/+6
| | | | | | | | | | | | | | | Since usign miscalculates SHA-512 digests for input sizes of exactly 64 + N * 128 + 110 or 64 + N * 128 + 111 bytes, we need to apply some white space padding to avoid triggering the hashing edge case. While usign itself has been fixed already, there is still many firmwares in the wild which use broken usign versions to verify current package indexes so we'll need to carry this workaround in the forseeable future. Ref: https://forum.openwrt.org/t/signature-check-failed/41945 Ref: https://git.openwrt.org/5a52b379902471cef495687547c7b568142f66d2 Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit e1f588e446c7ceb696b644b37aeab9b3476e2a57)
* usign: update to latest Git HEADJo-Philipp Wich2019-08-061-3/+3
| | | | | | | | | | | | | | | This update fixes usign signature verification on files with certain file sizes triggering a bug in the shipped SHA-512 implementation. 5a52b37 sha512: fix bad hardcoded constant in sha512_final() 3e6648b README: replace unicode character 716c3f2 README: add reference to OpenBSD signify 86d3668 README: provide reference for ed25519 algorithm 939ec35 usign: main.c: describe necessary arguments for -G Ref: https://forum.openwrt.org/t/signature-check-failed/41945 Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 991dd5a89340367920315a3fd0390a7423e6b34a)
* kernel: bump 4.14 to 4.14.136Koen Vandeputte2019-08-0628-174/+61
| | | | | | | | | | | | | | | | | | | | | Refreshed all patches. Altered patches: - 306-v4.16-netfilter-remove-saveroute-indirection-in-struct-nf_.patch Remove upstreamed: - 100-powerpc-4xx-uic-clear-pending-interrupt-after-irq-ty.patch - 088-0002-i2c-qup-fixed-releasing-dma-without-flush-operation.patch - 500-arm64-dts-marvell-Fix-A37xx-UART0-register-size.patch Fixes: - CVE-2019-13648 - CVE-2019-10207 Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mpc85xx: correct OCEDO Panda LED definitionDavid Bauer2019-08-051-2/+2
| | | | | | | | WLAN0 and the unused LED are currently swapped. Fix this, so the LED behavior matches the other OCEDo devices. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit a3a2b4857eb9c926bdbce7809bf5bd92f777e967)
* tools/patch: apply upstream patch for CVE-2019-13636Russell Senior2019-08-012-1/+109
| | | | | | | | | | In GNU patch through 2.7.6, the following of symlinks is mishandled in certain cases other than input files. This affects inp.c and util.c. https://nvd.nist.gov/vuln/detail/CVE-2019-13636 Signed-off-by: Russell Senior <russell@personaltelco.net> (cherry picked from commit 995bcc532943639f3df36dbcaa361f9167f9f4d5)
* scripts/ubinize-image.sh: fix buildbot breakagePetr Štetiar2019-08-011-1/+1
| | | | | | | | | | | | | | | New Docker based buildslaves install just bare minimum of packages, thus not having bsdmainutils package installed which provides `hexdump` utility, leading to the following build breakage on buildbots: ubinize-image.sh: 12: /builder/scripts/ubinize-image.sh: hexdump: not found So this patch simply replaces `hexdump` with `od` utility provided by coreutils package, which should be likely available. Co-authored-by: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit c6d41c320c795b0bb9a9350c7d4b1ce55f25769a)
* ar71xx: fix HiveAP 121 PLL for 1000MDavid Bauer2019-08-011-1/+1
| | | | | | | | | | | | | The Aerohive HiveAP 121 has the wrong PLL value set for Gigabit speeds, leading to packet-loss. 10M and 100M work fine. This commit sets the Gigabit Ethernet PLL value to the correct value, fixing packet loss. Confirmed with iperf and floodping. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit cb49e46a8a4526d86270ced3ba3aa90225ca82d7)
* ar71xx: really fix Mikrotik board detectionKoen Vandeputte2019-08-011-0/+1
| | | | | | | | | | | | | | | | | | commit e09da0169a08 ("ar71xx: fix Mikrotik board detection") was generated based on testing a rb-912 board, on which detection failed. Testing on more hardware shows something fun: machine : MikroTik RouterBOARD 922UAGS-5HPacD machine : Mikrotik RouterBOARD 912UAG-5HPnD Both lowercase and uppercase are used. So ensure we support both now .. Fixes: e09da0169a08 ("ar71xx: fix Mikrotik board detection") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit 845b2a1cfe307394f3f2144cce085bbb5e171ecc)
* toolchain/musl: bump to version 1.1.23Koen Vandeputte2019-07-311-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | new features: - riscv64 port - configure now allows customizing AR and RANLIB vars - header-level support for new linux features in 5.1 major internal changes: - removed extern __syscall; syscall header code is now fully self-contained performance: - new math library implementation for log/exp/pow - aarch64 dynamic tlsdesc function is streamlined compatibility & conformance: - O_TTY_INIT is now defined - sys/types.h no longer pollutes namespace with sys/sysmacros.h in any profile - powerpc asm is now compatible with clang internal assembler changes for new POSIX interpretations: - fgetwc now sets stream error indicator on encoding errors - fmemopen no longer rejects 0 size bugs fixed: - static TLS for shared libraries was allocated wrong on "Variant I" archs - crash in dladdr reading through uninitialized pointer on non-match - sigaltstack wrongly errored out on invalid ss_size when doing SS_DISABLE - getdents function misbehaved with buffer length larger than INT_MAX - set*id could deadlock after fork from multithreaded process arch-specfic bugs fixed: - s390x SO_PEERSEC definition was wrong - passing of 64-bit syscall arguments was broken on microblaze - posix_fadvise was broken on mips due to missing 7-arg syscall support - vrregset_t layout and member naming was wrong on powerpc64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.134Koen Vandeputte2019-07-315-52/+5
| | | | | | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 049-v4.20-mips-remove-superfluous-check-for-linux.patch Fixes: - CVE-2019-3846 - CVE-2019-3900 Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* imx6: bump SDMA firmware to 3.5Koen Vandeputte2019-07-311-0/+0
| | | | | | | | | | | - add uart rom script address in header of sdma firmware to support the uart driver of latest kernel working well while old firmware assume ram script used for uart driver as NXP internal legacy kernel. - add multi-fifo SAI/PDM scripts. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit 819b6345a206ad182dd3c2d786a3d7f04e33f751)
* ath79: make target source-onlyPetr Štetiar2019-07-291-1/+1
| | | | | | | In order to prevent build of images for this release as ath79 is going to deprecate ar71xx in the next release. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ar71xx: fix Mikrotik board detectionKoen Vandeputte2019-07-291-1/+1
| | | | | | | | | | | Fix a typo in the machine type being extracted from /proc/cpuinfo which causes all Mikrotik board to be undetected properly. This lead to sysupgrade issues and probably some others too. Fixes: 76c963bb01fb ("ar71xx: base-files: fix board detect on new MikroTik devices") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: fix WLAN LED names for Archer C7Tomislav Požega2019-07-281-2/+2
| | | | | | | Update WLAN LED colour identifier for both interfaces on Archer C7 Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> (cherry picked from commit 65762cdd2223d759f5836214143888e32ce5766b)
* ar71xx: fix system LED names on Archer C5/C7Tomislav Požega2019-07-281-2/+2
| | | | | | | | Move system LED board definitions of Archer C5/C7 to reflect actual system LED colour used Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> (cherry picked from commit a73934fc9ad05207e79a3e58abc3d14eee28b6f2)
* ar71xx: Archer C7 v1 LED names and RFKILL fixesTomislav Požega2019-07-281-10/+10
| | | | | | | | | | | All leds on these boards are green. v1 has RFKILL GPIO 23 for production units (it had GPIO 13 only for test phase units, and these are rather very rare to find). As for the previous attempt to fix this and revert due to WDR boards have blue leds, it was wrong: WDR board does not use common setup (false). Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> (cherry picked from commit c79c001b593bd826d51722f2c83ad8770255f3b3)
* ar71xx: update qca-usb-quirks patchTomislav Požega2019-07-281-1/+1
| | | | | | | | Base address for USB0 has changed from 0x18116c94 on AR934X to 0x18116d94 on QCA9558. CP Typo remained for years here... Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> (cherry picked from commit fd5aa19480b92045db224a2d2450680e9fe66385)
* mac80211: brcm: improve brcmfmac debugging of firmware crashesRafał Miłecki2019-07-282-1/+39
| | | | | | | This provides a complete console messages dump. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 6a7b201b6c5c82d3d8d392ae931100c1909869e0)
* mac80211: brcm: update brcmfmac 5.4 patchesRafał Miłecki2019-07-2810-23/+32
| | | | | | | Use commits from wireless-drivers-next.git. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 8e466fb7e315f33d0d2bbc06c4fa7c27b81d9a3b)
* tfa-layerscape: fix create_pbl and byte_swap host buildBiwen Li2019-07-273-2/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - make create_pbl and byte_swap as host tools - fix a bug that maybe use the cross compiler to compile create_pbl and byte_swap: # -a option appends the image for Chassis 3 devices in case of non secure boot aarch64-openwrt-linux-musl-gcc -Wall -Werror -pedantic -std=c99 -O2 -DVERSION=v1.5(release):reboot-10604-ge9216b3336 -D_GNU_SOURCE -D_XOPEN_SOURCE=700 -c -o create_pbl.o create_pbl.c cc1: note: someone does not honour COPTS correctly, passed 0 times LD create_pbl /usr/bin/ld: create_pbl.o: Relocations in generic ELF (EM: 183) /usr/bin/ld: create_pbl.o: Relocations in generic ELF (EM: 183) /usr/bin/ld: create_pbl.o: Relocations in generic ELF (EM: 183) create_pbl.o: error adding symbols: File in wrong format collect2: error: ld returned 1 exit status Makefile:43: recipe for target create_pbl failed make[4]: *** [create_pbl] Error 1 plat/nxp/tools/pbl_ch2.mk:45: recipe for target pbl failed make[3]: *** [pbl] Error 2 - add tfa- prefix to all tools in order to avoid future clashes with other toolnames Signed-off-by: Biwen Li <biwen.li@nxp.com> [added missing HOST_CFLAGS, added tfa- prefix to the tools] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 83d5ca2186f7801d94f336e09f8db0a2c5c5d97f)
* tfa-layerscape: fix fiptool host buildPetr Štetiar2019-07-272-2/+88
| | | | | | | | | | | | | | | | | | | fiptool is a host tool, used in a firmware generation pipeline, but it's not treated as such, leading to the build breakage on the hosts which don't have {Open,Libre}SSL dev package installed: In file included from fiptool.h:16:0, from fiptool.c:19: fiptool_platform.h:18:27: fatal error: openssl/sha.h: No such file or directory # include <openssl/sha.h> So this patch promotes fiptool into the host tool with proper host include and library paths under STAGING_DIR. Ref: https://github.com/openwrt/openwrt/pull/2267 Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit b8249cef9fedb1e2e3ed4f1b16382c6815e08df1)
* openwrt-keyring: update to Git HEADJo-Philipp Wich2019-07-251-3/+3
| | | | | | | | | | | | | | | 8080ef3 usign: add 19.07 release build pubkey e24fe0d usign: use distro agnostic comments 251ded7 usign: fix filename of Stijn's usign key 14f0efc gpg: update snapshots public signing key 14f845b gpg: replace my public GPG key 4f735b8 gpg: add OpenWrt 19.07 signing key 228f8da gpg: add OpenWrt 18.06 v2 signing key 36057d9 gpg: update LEDE 17.01 public signing key f2989ab Add my public GPG and usign key Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit e9216b3336f7a774be7021dd663a433d9ec5edc7)
* urngd: move project to git.openwrt.orgPetr Štetiar2019-07-221-4/+4
| | | | | | | Let's move project to a proper place. Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit bec8fb1ee7188bfe7eff0f39e060039623e2575e)
* build: add urandom-seed and urngd to default packages setPetr Štetiar2019-07-221-1/+1
| | | | | | | | | | | | | | urandom-seed content was split from base-files into separate package so in order to preserve the current functionality and to provide some fallback mechanism in case jent-rng initialization fails in urngd we need to add it back. urngd is OpenWrt's micro non-physical true random number generator based on timing jitter. Tested-by: Lucian Cristian <lucian.cristian@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit f5387b754f98f85bf4a1c8c392a965bdbcb96db6)
* base-files: move urandom seed bits into separate packagePetr Štetiar2019-07-225-1/+42
| | | | | | | | So it's possible to install or remove it as needed. Tested-by: Lucian Cristian <lucian.cristian@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 27bfde9c9f789dbfabebf13047e8b042c27cdeef)
* ubox: move getrandom into separate getrandom packagePetr Štetiar2019-07-221-3/+14
| | | | | | | | So it's possible to install or remove it as needed. Tested-by: Lucian Cristian <lucian.cristian@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 9b4de712cae9b3d745ea4331a804242505f58619)
* urngd: add micro non-physical true RNG based on timing jitterPetr Štetiar2019-07-222-0/+65
| | | | | | | | | | | | | | | | | | | μrngd is OpenWrt's micro non-physical true random number generator based on timing jitter. Using the Jitter RNG core, the rngd provides an entropy source that feeds into the Linux /dev/random device if its entropy runs low. It updates the /dev/random entropy estimator such that the newly provided entropy unblocks /dev/random. The seeding of /dev/random also ensures that /dev/urandom benefits from entropy. Especially during boot time, when the entropy of Linux is low, the Jitter RNGd provides a source of sufficient entropy. Acked-by: Jo-Philip Wich <jow@mein.io> Tested-by: Lucian Cristian <lucian.cristian@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 714bd89fceee494282984d0ed76e4a3acde419e0)
* mac80211: brcm: backport first set of 5.4 brcmfmac changesRafał Miłecki2019-07-2119-15/+1875
| | | | | | | | | | | | This doesn't include 9ff8614a3dbe ("brcmfmac: use separate Kconfig file for brcmfmac") due to a few conflicts with backports changes. An important change is: [PATCH 2/7] brcmfmac: change the order of things in brcmf_detach() which fixes a rmmod crash in the brcmf_txfinalize(). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit db8e08a5a4469f98ed5d9b0ff3189e356f53d924)
* ramips: add support for ASUS RT-AC57UDavid Bauer2019-07-213-4/+167
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SoC: MediaTek MT7621AT RAM: 128M (Winbond W631GG6KB-15) FLASH: 16MB (Spansion S25FL128SA) WiFi: MediaTek MT7603EN bgn 2SS WiFi: MediaTek MT7612EN nac 2SS BTN: Reset - WPS LED: - Power - LAN {1-4} - WAN - WiFi 2.4 GHz - WiFi 5 GHz - USB UART: UART is present next to the Power LED. TX - RX - GND - 3V3 / 57600-8N1 3V3 is the nearest one to the Power LED. Installation ------------ Via TFTP: 1. Set your computers IP-Address to 192.168.1.75. 2. Power up the Router with the Reset button pressed. 3. Release the Reset button after 5 seconds. 4. Upload OpenWRT sysupgrade image via TFTP: > tftp -4 -v -m binary 192.168.1.1 -c put <IMAGE> Via SSH: Note: User/password for SSH is identical with the one used in the Web-interface. 1. Complete the initial setup wizard. 2. Activate SSH under "Administration" -> "System". 3. Transfer the OpenWrt sysupgrade image via scp: > scp owrt.bin admin@192.168.1.1:/tmp 4. Connect via SSH to the router. > ssh admin@192.168.1.1 5. Write the OpenWrt image to flash. > mtd-write -i /tmp/owrt.bin -d linux 6. Reboot the router > reboot Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 14e0e4f138e35c3e2a15cc3a836c939547ee053b)
* ath79: add support for devolo WiFi pro 1750xDavid Bauer2019-07-214-1/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Qualcomm Atheros QCA9558 RAM: 128M DDR2 FLASH: 16MiB ETH: 1x Atheros AR8035 (PoE in) WiFi2: QCA9558 3T3R WiFi5: QCA9880 3T3R BTN: 1x Reset LED: 1x LED Power (non-controllable) 1x LED Status (internal) 1x LED LAN (controlled by PHY) 1x LED WLAN BEEP: 1x GPIO attached piezo beeper UART: 3.3V GND TX RX (115200-N-8) (3.3V is square pad) Header is located next to external-LED header. Installation ------------ Make sure you set a password for the root user as prompted on first setup! 1. Upload OpenWRT sysupgrade image via SSH to the device. Use /tmp as the destination folder on the device. User is root, password the one set in the web interface. 2. Install OpenWRT with > sysupgrade -n -F /tmp/<openwrt-image-name> Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit cb3cd526948af3f69da1af18e035177a0a8f58e3)
* ar71xx: enable SGMII fixup on Mikrotik wAP ACEtienne Champetier2019-07-211-0/+16
| | | | | | | | | | | | | | | | | fixes intermittent loss of connectivity on 1Gbit port, with log message: > 803x_aneg_done: SGMII link is not ok Thanks to David Bauer for pointing me in the right direction. I just had to figure out the right bus_id, which you find in this log: > ag71xx ag71xx.1: connected to PHY at gpio-1:00 [uid=004dd074, driver=Atheros 8031 ethernet] Fixes FS#2236 Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com> [Wrapped commit message - Fixed whitespace erors] Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 2a7519e29d6cbbe1eb73623ef35add0ef596fb5f)
* mt7620: disable image generation for Netgear EX2700Petr Štetiar2019-07-201-1/+1
| | | | | | | | | Image generation is currently failing on builbots due to the following error: WARNING: Image file [...] mt7620-ex2700-squashfs-factory.bin is too big Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86: add modern network modules to Generic targetAlberto Bursi2019-07-201-1/+2
| | | | | | | | | | | | | | | | Many Atom-based embedded/industrial x86 boards can't run 64bit operating systems due to either processor or board firmware limitations, but they have modern interfaces (PCIe) or have modern Intel gigabit controllers onboard. With the current default package selection for x86 Generic target their network won't work. Add the modern gigabit network modules needed or most likely going to be used as add-in cards, similar to what is the list on x86_64 target. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it> [fixed whitespace issue] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit bb27cde2579b0273c464e5ccd3dda7d14e84fd23)
* ath25: disable image generation for ubnt2 and ubnt5 devicesPetr Štetiar2019-07-201-2/+2
| | | | | | | | | | | | | | | | Image generations is currently failing on builbots due to the following errors: mkfwimage -B XS2 -v XS2 [...] ath25-ubnt2-squashfs-sysupgrade.bin ERROR: Failed creating firmware layout description - error code: -2 mkfwimage -B XS5 -v XS5 [...] ath25-ubnt5-squashfs-sysupgrade.bin ERROR: Failed creating firmware layout description - error code: -2 That cryptic -2 error simply means, that kernel+rootfs doesn't fit into the firmware partition. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* gpio-button-hotplug: unify polled and interrupt codeDavid Bauer2019-07-191-65/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch unifies the polled and interrupt-driven gpio_keys code paths as well implements consistent handling of the debounce interval set for the GPIO buttons and switches. Hotplug events will only be fired if 1. The input changes its state and remains stable for the duration of the debounce interval (default is 5 ms). 2. In the initial stable (no state-change for duration of the debounce interval) state once the driver module gets loaded. Switch type inputs will always report their stable state. Unpressed buttons will not trigger an event for the initial stable state. Whereas pressed buttons will trigger an event. This is consistent with upstream's gpio-key driver that uses the input subsystem (and dont use autorepeat). Prior to this patch, this was handled inconsistently for interrupt-based an polled gpio-keys. Hence this patch unifies the shared logic into the gpio_keys_handle_button() function and modify both implementations to handle the initial state properly. The changes described in 2. ) . can have an impact on the failsafe trigger. Up until now, the script checked for button state changes. On the down side, this allowed to trigger the failsafe by releasing a held button at the right time. On the plus side, the button's polarity setting didn't matter. Now, the failsafe will only engage when a button was pressed at the right moment (same as before), but now it can theoretically also trigger when the button was pressed the whole time the kernel booted and well into the fast-blinking preinit phase. However, the chances that this can happen are really small. This is because the gpio-button module is usually up and ready even before the preinit state is entered. So, the initial pressed button event gets lost and most devices behave as before. Bisectors: If this patch causes a device to permanently go into failsafe or experience weird behavior due to inputs, please check the following: - the GPIO polarity setting for the button - the software-debounce value Run-tested for 'gpio-keys' and 'gpio-keys-polled' on - devolo WiFi pro 1200e - devolo WiFi pro 1750c - devolo WiFi pro 1750x - Netgear WNDR4700 - Meraki MR24 - RT-AC58U Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [further cleanups, simplification and unification] (cherry picked from commit 27f3f493de0610c74de2ea406641b256bfcc13a9)
* gpio-button-hotplug: fix 4.19 build breakage on malta/be64Petr Štetiar2019-07-191-0/+1
| | | | | | | | | | | | | | While testing 4.19 build on malta/be64, I've encountered following error: gpio-button-hotplug/gpio-button-hotplug.c:529:18: error: implicit declaration of function 'gpio_to_desc' which is caused by the missing include fixed by this patch. Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit dd6d82112a10796dd5aa0f9e9c76ec8e77e7e211)
* ath79: Use -v1 suffix for TP-Link WDR3600/4300Adrian Schmutzler2019-07-175-14/+14
| | | | | | | | | | | | | | | In ath79, identifiers tplink_tl-wdr3600 and tplink_tl-wdr4300 have been used while most other TP-Link devices include the revision. Although there actually is only one major revision of these devices, they bear the revision on their bottom (v1.x). TP-Link also refers to the devices as V1 on its web page. This patch thus adds -v1 to both so it is more consistent with other devices and with what you would expect from reading the on-device sticker and the support pages. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* openvpn: fix handling of list optionsMatt Merhar2019-07-172-3/+4
| | | | | | | | | | | | | | | This addresses an issue where the list option specified in /etc/config/openvpn i.e. 'tls_cipher' would instead show up in the generated openvpn-<name>.conf as 'ncp-ciphers'. For context, 'ncp_ciphers' appears after 'tls_cipher' in OPENVPN_LIST from openvpn.options. Also, the ordering of the options in the UCI config file is now preserved when generating the OpenVPN config. The two currently supported list options deal with cipher preferences. Signed-off-by: Matt Merhar <mattmerhar@protonmail.com> (cherry picked from commit 1d4c4cbd20580dd211431ab58460a6eebd5e021e)
* ath79: ar9330: add missing watchdog nodePetr Štetiar2019-07-171-0/+10
| | | | | | | | | It was reported in FS#2385, that Carambola2 doesn't currently have working watchdog so fix it by adding watchdog node. Ref: FS#2385 Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 0893f28e19afbd9d4081f59df10631d6ef02e0d7)
* iptables: update to 1.8.3Deng Qingfang2019-07-178-170/+28
| | | | | | | | | | | | | | | | | | | | | | Update iptables to 1.8.3 ChangeLog: https://netfilter.org/projects/iptables/files/changes-iptables-1.8.3.txt Removed upstream patches: - 001-extensions_format-security_fixes_in_libip.patch - 002-include_fix_build_with_kernel_headers_before_4_2.patch - 003-ebtables-vlan-fix_userspace_kernel_headers_collision.patch Altered patches: - 200-configurable_builtin.patch - 600-shared-libext.patch No notable size changes Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [lipibtc ABI_VERSION fix] (cherry picked from commit 299f6cb2da0a443484339aaa51b3d9edcc21ce4e)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 12:08:46 +0000