aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ath79: fix OCEDO RaccoonDavid Bauer2018-07-252-0/+5
| | | | | | | | | | | The OCEDO Raccoon only has one ethernet port, but currently uci sections for WAN and LAN are created. Additionally, newer versions of the devices U-Boot (units with SteelWRT) set the kernel-cmdline and therefore overwrite the partition-layout. We fix this by overwriting the cmdline supplied by the bootloader. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: remove stale get_status_led callMathias Kresin2018-07-251-3/+0
| | | | | | | | | | | | The get_status_led() function was removed due to the convertion to dts alias based status led. Since we don't need the boardname any longer, the functions.sh include isn't required any more. Fixes: c9c4b2116c09 ("ramips: Use dts alias based status led") Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: don't auto attach ubi on read errorMathias Kresin2018-07-242-10/+20
| | | | | | | | | | | | With a10a204aab26cc ("kernel: make ubi auto-attach check for a tar file magic") the check for the magic was added without considering a failing mtd_read(). If the read fails, no check is done and the mount code is called straight away. Failing with an error message for such cases seems to me the cleaner way, as it would allow to spot hidden/workaround issues. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: handle bad blocks in ubi auto attach codeMathias Kresin2018-07-242-8/+36
| | | | | | | | | | The first block(s) of the ubi mtd device might be bad. We need to take care on our own to skip the bad block(s) and read the next one(s). Don't treat recoverable read errors as fatal and check for the UBI magic if the data of a block could be recovered using ECC or similar. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: improve ubi auto attach code readabilityMathias Kresin2018-07-242-52/+62
| | | | | | | | | | | | | | Move the put_mtd_device() called on multiple error conditions to a goto label to use it later for more error conditions. The early return on failed open of the mtd device and mismatching mtd type allows to get rid of one level of indentation. By jumping to the cleanup code, a refcount bug is fixed for the wrong flash type condition. While at it, make clear that we only check for the UBI magic if the read from flash was successful. Signed-off-by: Mathias Kresin <dev@kresin.me>
* elfutils: Copy missing libraries to staging and packagesTed Hess2018-07-241-6/+6
| | | | | | | Newer shared libraries seem to have the package version as part of their name. E.g.: libelf-0.173.so Signed-off-by: Ted Hess <thess@kitschensync.net>
* utils/curl: Disable libpslDaniel Engberg2018-07-241-1/+2
| | | | | | | | | Disabled libpsl to fix build issue reported by buildbots Package libcurl is missing dependencies for the following libraries: libpsl.so.5 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* build: do not override CCACHE_DIR when ccache is disabledJo-Philipp Wich2018-07-242-2/+2
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: prereq-build.mk: fix gcc/g++ SetupHostCommand invocationJo-Philipp Wich2018-07-241-2/+2
| | | | | | | A missing comma caused the first command option to be considered part of the error message. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ipq40xx: drop bus driver, its a no-op and only does lots of alloc/freeJohn Crispin2018-07-2412-12178/+0
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* wireguard-tools: add wireguard_watchdog scriptAleksandr V. Piskunov2018-07-222-2/+63
| | | | | | | | | | | | This watchdog script tries to re-resolve hostnames for inactive WireGuard peers. Use it for peers with a frequently changing dynamic IP. persistent_keepalive must be set, recommended value is 25 seconds. Run this script from cron every minute: echo '* * * * * /usr/bin/wireguard_watchdog' >> /etc/crontabs/root Signed-off-by: Aleksandr V. Piskunov <aleksandr.v.piskunov@gmail.com> [bump the package release] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mac80211: backport and update patches for ath10kAnsuel Smith2018-07-2219-74/+2508
| | | | | | | | | | | | | | | | | | | | | | | | This commit refreshes and updates the VHT160 ath10k support fix patches and adds a number of backports from ath-next: * 8ed05ed06fca ath10k: handle tdls peer events * 229329ff345f ath10k: wmi: modify svc bitmap parsing for wcn3990 * 14d65775687c ath10k: advertise TDLS wider bandwidth support for 5GHz * bc64d05220f3 ath10k: debugfs support to get final TPC stats for 10.4 variants * 8b2d93dd2261 ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk) * 4b190675ad06 ath10k: fix kernel panic while reading tpc_stats * be8cce96f14d ath10k: add support to configure channel dwell time * f40105e67478 ath: add support to get the detected radar specifications * 6f6eb1bcbeff ath10k: DFS Host Confirmation * 260e629bbf44 ath10k: fix memory leak of tpc_stats * 38441fb6fcbb ath10k: support use of channel 173 * 2e9bcd0d7324 ath10k: fix spectral scan for QCA9984 and QCA9888 chipsets Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [move backported patches in the 3xx number space, bring in upstream order, replace incomplete patch files with git format-patch ones, rewrite commit message, fix subject] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* wireguard: bump to 0.0.20180718Jason A. Donenfeld2018-07-221-2/+2
| | | | | | | | | | | | | | 80b41cd version: bump snapshot fe5f0f6 recieve: disable NAPI busy polling e863f40 device: destroy workqueue before freeing queue 81a2e7e wg-quick: allow link local default gateway 95951af receive: use gro call instead of plain call d9501f1 receive: account for zero or negative budget e80799b tools: only error on wg show if all interfaces failk Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> [Added commit log to commit description] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* hostapd: remove unused struct hostapd_ubus_ifaceFelix Fietkau2018-07-222-16/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* rules.mk: replace iremap when using GCC 8Syrone Wong2018-07-221-0/+4
| | | | | | The original -iremap is replaced by -fmacro-prefix-map in GCC 8 Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
* toolchain/gcc: add GCC 8.1.0Syrone Wong2018-07-2222-0/+862
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes compared to GCC 7.x 001-revert_register_mode_search.patch dropped The underlying issue is described at the end of https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58139 It is fixed by the upstream commit: https://github.com/gcc-mirror/gcc/commit/3fa2798aa887d141d86985240f03e2f3809e7e62 020-PR-libstdc-81797-Add-.NOTPARALLEL-to-include-Makefil.patch dropped due to already upstream 100-PR-rtl-optimization-83496.patch dropped due to already upstream 910-mbsd_multi.patch modified to fix ambiguous overloaded inform() call error gcc/input.h header: define UNKNOWN_LOCATION ((source_location) 0) - inform (0, "someone does not honour COPTS correctly, passed %d times", - honour_copts); + inform (UNKNOWN_LOCATION, "someone does not honour COPTS correctly, passed %d times", + honour_copts); 940-no-clobber-stamp-bits.patch dropped due to fixed upstream by another way upstream commit: https://github.com/gcc-mirror/gcc/commit/87b2d547f8ac9778d66909b8726fe967d1efbc74 950-cpp_file_path_translation.patch dropped, Both -fmacro-prefix-map and -ffile-prefix-map are added to gcc 8.1.0, if I understand it correctly, we should use -fmacro-prefix-map usage: -fmacro-prefix-map=@var{old}=@var{new} upstream commit: https://github.com/gcc-mirror/gcc/commit/859b51f83662d01e4f158ea9327db9ca37fe70b3 -iremap exists as a flag for a long time, for backward compatibility, I think we should keep the variable name unchanged but change its value in rules.mk for gcc 8.x and higher. Compile and run tested on x86_64 Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
* kernel: backport a change to 4.9 which disables overly aggressive warnings ↵Felix Fietkau2018-07-221-0/+45
| | | | | | on gcc 8 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: backport fixes for GCC 8 errors in syscall definitionsFelix Fietkau2018-07-224-0/+457
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: do not alter global default package selection from profilesJo-Philipp Wich2018-07-211-1/+0
| | | | | | | | | | | | | | | | | This partly reverts ca32373c951c651f4fe5d8f99ddeb8d4f20bbe3e which lets profiles that suppress packages to alter the package selection for all devices of the target when building with CONFIG_TARGET_PER_DEVICE_ROOTFS. In particular, this caused the brcm47xx Edimax PS-1208MFG profile to disable mtd, dropbear, firewall and other essential packages for all brcm47xx/generic builds. To solve this problem, prevent profiles from mangling the global DEFAULT_PACKAGES selection and restrict the supression of negated packages to the local PACKAGE variable list only. Fixes ca32373c95 ("target.mk: let profile remove from DEFAULT_PACKAGES") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* iproute2: tc: backport canonical cake supportKevin Darbyshire-Bryant2018-07-212-150/+154
| | | | | | | | | | | | | | | | | | | iproute2's tc was updated to support the recently upstreamed cake qdisc. Backport this canonical support from upstream into iproute2 v4.17 There is no kernel kmod/userspace tc ABI change in this release from the previous package bump, so everyone can breath a sigh of relief. This is largely a code style change, the exception to prove the rule: option 'autorate_ingress' has been changed to 'autorate-ingress' to fit in with upstream option naming expectations. No openwrt package (e.g. sqm-scripts) has knowledge of 'autorate_ingress' thus only users who made their own scripts or used it within the 'dangerous configuration' options of sqm-scripts will be affected. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* build: fix compile error when a package includes itself in PROVIDESFelix Fietkau2018-07-201-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: dts: Remove device_type = "ethernet-phy"Rosen Penev2018-07-1912-26/+0
| | | | | | device_type is deprecated. Upstream doesn't seem to like it either. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* apm821xx: unify My Book Live Single + Duo imagesChristian Lamparter2018-07-194-246/+187
| | | | | | | | | | | | | | By takimata: "Come to think of it, an MBL Single board boots up just fine on an MBL Duo image, and the MBL Single board identifies completely identical to the MBL Duo (Board: Apollo-3G - APM82181 Board, 2*SATA, 1*USB). I wonder if there is any downside to just using the MBL Duo firmware on a MBL Single. I wonder if the two firmwares could even be unified." <https://forum.lede-project.org/t/wd-mybook-live-duo-two-disks/16195/9> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ramips: define common MikroTik RouterBOARD image recipeThibaut VARÈNE2018-07-191-11/+9
| | | | | | | | | | All these devices share the exact same image format. The usb3 kmod is added for the rbm11g, as the rbm11g has a mini-pcie slot like its bigger sibling. The usb kmod is necessary for usb-over-pcie support, which is mandatory for a lot of LTE modules. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* lantiq: add support for FritzBox 7312Johann Neuhauser2018-07-185-1/+197
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The FritzBox 7312 is also known as 1&1 WLAN-MODEM. The device is almost the same as FB7330, but only one ETH-Port and no USB. Hardware SoC: Lantiq Xway ARX188 PSB 50812 EL RAM: 64MB DDR1 (Zentel A4S12D40FTP-G5) Ethernet: Atheros 8030 Wireless: Atheros AR9227 b/g/n 2x2 DSL: Lantiq ADSL2+ DECT: Dialog SC14441 Buttons: WiFi, DECT LEDs: Power/DSL, Fon, DECT, WLAN, Info LEDs Power: GPIO#44 (active low) Internet: GPIO#47 (active low) DECT: GPIO#38 (active low) WLAN: GPIO#37 (active low) Info: GPIO#35 (active low) The Fon LED is labeled as internet in avm gpl sources. Buttons WLAN: GPIO#1 (active low) DECT: GPIO#2 (active low) Phy GPIO#03: 25 MHz GPIO#34: Reset (active low) GPIO#39: Int GPIO#42: MII MDIO GPIO#43: MII MDC PCIe GPIO#21: reset (active low) Installation: To install OpenWrt via Eva bootloader, within the first seconds after power on a ftp connection need to be established to the FRITZ!Box at 192.168.178.1 and the the following ftp commands need to be run: ftp> quote USER adam2 ftp> quote PASS adam2 ftp> binary ftp> debug ftp> passive ftp> quote MEDIA FLSH ftp> put /path/to/openwrt-lantiq-xway-avm_fritz7312-squashfs-sysupgrade.bin mtd1 ftp> quote REBOOT Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de>
* lantiq: etop: pass devicetree node to phy driverJohann Neuhauser2018-07-181-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use of_mdiobus_register() to pass the ethernet phy node to the phy drivers. This is needed for the at8030 phy driver which needs to know the GPIO which is connected to the ar8030 reset pin. This driver expects a child in gsw/etop node named "mdio-bus", which has the ethernet phys defined: &gsw { phy-mode = "rmii"; phy-handle = <&phy0>; mtd-mac-address = <&ath9k_cal 0xa91>; mtd-mac-address-increment = <(-2)>; mdio-bus { #address-cells = <1>; #size-cells = <0>; reg = <0>; phy0: ethernet-phy@0 { reg = <0>; reset-gpios = <&gpio 34 GPIO_ACTIVE_LOW>; }; }; }; Fallback to mdiobus_register() if no mdio-bus child node exists. This way we don't need to touch all xway dts files, for which we don't know the actual address on the mdio bus. Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de>
* base-files: fix wrong sysctl parameter orderLuiz Angelo Daros de Luca2018-07-182-2/+2
| | | | | | | | | | | Restarting service sysctl echos multiple errors like: sysctl: -e: No such file or directory After the first filename, all remaining arguments are treated as files. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* ath79: fix TP-Link Archer C7 v2 wlan1 MAC addressAleksandr V. Piskunov2018-07-181-0/+1
| | | | | | | | | | | | The mac address for the 2.4 wireless need to be decremented by one. Correct MAC adress increments for this board are: wlan0 (5GHz) : -2 wlan1 (2.4GHz) : -1 eth1 (LAN) : 0 eth0 (WAN) : 1 Signed-off-by: Aleksandr V. Piskunov <aleksandr.v.piskunov@gmail.com>
* hostapd: fix conflicts hellMathias Kresin2018-07-181-95/+47
| | | | | | | | | | | | | Add each variant to the matching PROVIDERS variables after evaluating the respective hostapd*, wpad* and wpa* variant. Each package providing the same feature will automatically conflict with all prior packages providing the same feature. This way we can handle the conflicts automatically without introducing recursive dependencies. Signed-off-by: Mathias Kresin <dev@kresin.me>
* hostapd: cleanup package definitionMathias Kresin2018-07-181-46/+48
| | | | | | | | | | | | Move common variables and/or values to the package (variant) default. Add additional values in variant packages if necessary. Remove further duplicates by introducing new templates. Remove the ANY_[HOSTAPD|SUPPLICANT_PROVIDERS]_PROVIDERS. The are the same as the variables without the any prefix. No need to maintain both variables. Signed-off-by: Mathias Kresin <dev@kresin.me>
* igmpproxy: run in foreground for procdKevin Darbyshire-Bryant2018-07-182-2/+2
| | | | | | | | | procd needs processes to stay in foreground to remain under its gaze and control. Failure to do so means service stop commands fail to actually stop the process (procd doesn't think it's running 'cos the process has exited already as part of its forking routing) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* firewall3: update to latest git HEADHans Dedecker2018-07-171-3/+3
| | | | | | d2bbeb7 firewall3: make reject types selectable by user Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dnsmasq: don't use network functions at boottime (FS#1542)Hans Dedecker2018-07-172-6/+15
| | | | | | | | | | | | As dnsmasq is started earlier than netifd usage of network.sh functions at boottime will fail; therefore don't call at boottime the functions which construct the dhcp pool/relay info. As interface triggers are installed the dhcp pool/relay info will be constructed when the interface gets reported as up by netifd. At the same time also register interface triggers based on DHCP relay config. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ppp: fix building pptp pluginJo-Philipp Wich2018-07-172-1/+12
| | | | | | | | | The pptp.so plugin needs to be built with -fPIC as well in order to be linkable again. Fixes 888a15ff83 ("ppp: add missing -fPIC to rp-pppoe.so CFLAGS") Fixes e7397eef69 ("ppp: compile with LTO enabled") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* scripts/dl_github_archive.py: stringify exceptionYousong Zhou2018-07-171-4/+5
| | | | | | Closes openwrt/openwrt#1163 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* openvpn: increase procd termination timeout to 15sJo-Philipp Wich2018-07-172-1/+2
| | | | | | | | | Increase the termination timeout to 15s to let OpenVPN properly tear down its connections, especially when weak links or complex down scripts are involved. Fixes FS#859. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mediatek: fix parallel build issues in image build codeJo-Philipp Wich2018-07-171-10/+4
| | | | | | | | | Drop the parallel-unsafe custom Build/dtb macro and use the .dtb artifacts produced by the generic image build code. Also remove unused .dtb references in the mt7623 subtarget. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* base-files: network.sh: gracefully handle missing network.interface ubus nsJo-Philipp Wich2018-07-172-5/+11
| | | | | | | | | | | | | | | | | | | | | When attempting to use any of the functions in network.sh while netifd is not started yet, the ubus interface dump query will fail with "Not found", yielding an empty response. Subsequently, jsonfilter is invoked with an empty string instead of a valid JSON document, causing it to emit a second "unexpected end of data" error. This caused the dnsmasq init script to log the following errors during early boot on some systems: procd: /etc/rc.d/S19dnsmasq: Command failed: Not found. procd: /etc/rc.d/S19dnsmasq: Failed to parse json data: unexpected end of data. Fix the issue by allowing the ubus query to fail with "Not found" but still logging other failures, and by passing an empty JSON object to jsonfilter if the interface status cache is empty. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: Move F9K1115v2 under ar71xx tiny targetKin Chan2018-07-165-10/+10
| | | | | | | | | | | | F9K1115v2 has a kernel partition size of 1408 kB. Since kernel 4.9.x+ the kernel image for this device compiled had exceeded the kernel partition size limit and thus failing size check. The kernel image generated for this device under ar71xx tiny target is 1329.67 kB < 1408 kB. Signed-off-by: Kin Chan <kcchan1@outlook.com>
* librpc: add host build to install h files needed for nfs-kernel-server to ↵Peter Wagner2018-07-161-0/+9
| | | | | | get compiled Signed-off-by: Peter Wagner <tripolar@gmx.at>
* ramips: Use dts alias based status ledChuanhong Guo2018-07-16208-555/+1035
| | | | | | Also fix several typos in led node name. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: insmod phy-broadcom module during preinitSteffen Förster2018-07-161-1/+1
| | | | | | | | | Some HP Thin clients use the broadcom nextreme chip as integrated NIC. It is connected via PCI express and will only be found automatically if phy-broadcom is loaded before tg3. This small change makes the thin client usable for Freifunk with gluon out of the box. Signed-off-by: Steffen Förster <steffen@chemnitz.freifunk.net>
* popt: Replace dead upstream site with mirrorDaniel Engberg2018-07-161-1/+1
| | | | | | | We can safely assume by now that rpm5.org is dead and isn't coming back so just add another mirror instead. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/utils/f2fs-tools: Update to 1.11.0Daniel Engberg2018-07-161-2/+2
| | | | | | Update f2fs-tools to 1.11.0 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/utils/e2fsprogs: Update to 1.44.3Daniel Engberg2018-07-161-4/+4
| | | | | | | | | | | | | | | Update e2fsprogs to 1.44.3 Enable threads Enable LTO Numbers on mips_24kc (a few packages): Old --> New --> LTO and threads e2fsprogs_*_mips_24kc.ipk: 173 --> 174 --> 154kbyte libblkid_*_mips_24kc.ipk: 114 --> 114 --> 114kbyte libext2fs_*_mips_24kc.ipk: 138 --> 139 --> 139kbyte Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* ar71xx: add support for MikroTik RB931-2nDThibaut VARÈNE2018-07-169-2/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the MikroTik RB931-2nD (hAP mini): https://mikrotik.com/product/RB931-2nD Specifications: * SoC: Qualcomm QCA9533 (650MHz) * RAM: 32MiB * Storage: 16MiB SPI NOR flash * Ethernet: 3x100M * Wireless: QCA9533 built-in, dual-chain 802.11b/g/n Installation: 1. Setup a DHCP/BOOTP Server with the following parameters: * DHCP-Option 66 (TFTP server name): pointing to a local TFTP server within the same subnet of the DHCP range * DHCP-Option 67 (Bootfile-Name): matching the initramfs filename of the to be booted image. The usable intramfs files are: - openwrt-ar71xx-mikrotik-vmlinux-initramfs.elf - openwrt-ar71xx-mikrotik-vmlinux-initramfs-lzma.elf - openwrt-ar71xx-mikrotik-rb-nor-flash-16M-initramfs-kernel.bin 2. Press the reset button on the board and keep that pressed. 3. Connect the board to your local network via its Internet port. 4. Release the button after the LEDs on the board are turned off. Now the board should load and start the initramfs image from the TFTP server. 5. Now connect the board via either of its LAN ports (2 or 3). 6. Upload the sysupgrade image to the board with scp: $ scp openwrt-ar71xx-mikrotik-rb-nor-flash-16M-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/fw.bin 7. Log in to the running system listening on 192.168.1.1 via ssh as root (without password): $ ssh root@192.168.1.1 8. Flash the uploaded firmware file from the ssh session via the sysupgrade command: root@OpenWrt:~# sysupgrade /tmp/fw.bin Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* kernel: leds-apu2 remove boardname checkLukas Mrtvy2018-07-161-12/+0
| | | | | | | 'In different versions of coreboot are different names of apu boardname. No need to check boardname to load module.' Signed-off-by: Lukas Mrtvy <lukas.mrtvy@gmail.com>
* brcm63xx: initial support for Sky SR102 routerAndrius Štikonas2018-07-167-0/+236
| | | | | | | | | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. SOC: BCM63168 (BMIPS4350 V8.0 @400MHz) Flash size: 16 MiB RAM size: 128 MiB Heavily based on patch for OpenWRT Chaos Chalmer. Original patch and more info can be found at: https://openwrt.org/toh/sky/sr102 Known issues: - Wireless and ADSL modem are not working. Signed-off-by: Andrius Štikonas <andrius@stikonas.eu>
* apm821xx: attempt to fix sata access freezesChristian Lamparter2018-07-161-0/+25
| | | | | | | | | | | The original vendor's driver programmed the dma controller's AHB HPROT values to enable bufferable, privileged mode. This along with the "same priorty for both channels" could very well fix the freezes that have been reported on the forum by @ticerex and @takimata. <https://forum.lede-project.org/t/wd-mybook-live-duo-two-disks/16195/46> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kmod-sched-cake: bump to 20180716Kevin Darbyshire-Bryant2018-07-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bump to the latest cake recipe. This backports tc class support to kernel 4.9 and other than conditional kernel compilation pre-processor macros represents the cake that has gone upstream into kernel 4.19. Loud cheer! Fun may be had by changing cake tin classification for packets on ingress. e.g. tc filter add dev ifb4eth0 parent 800b: protocol ip u32 match \ ip dport 6981 0xffff action skbedit priority 800b:1 Where 800b: represents the filter handle for the ifb obtained by 'tc qdisc' and the 1 from 800b:1 represents the cake tin number. So the above example puts all incoming packets destined for port 6981 into the BULK (lowest priority) tin. f39ab9a Obey tin_order for tc filter classifiers 1e2473f Clean up after latest backport. 82531d0 Reorder includes to fix out of tree compilation 52cbc00 Code style cleanup 6cdb496 Fix argument order for NL_SET_ERR_MSG_ATTR() cab17b6 Remove duplicate call to qdisc_watchdog_init() 71c7991 Merge branch 'backport-classful' 32aa7fb Fix compilation on Linux 4.9 9f8fe7a Fix compilation on Linux 4.14 ceab7a3 Rework filter classification aad5436 Fixed version of class stats be1c549 Add cake-specific class stats 483399d Use tin_order for class dumps 80dc129 Add class dumping 0c8e6c1 Fix dropping when using filters c220493 Add the minimum class ops 5ed54d2 Start implementing tc filter/class support Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 21:01:18 +0000