aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: Move F9K1115v2 under ar71xx tiny targetKin Chan2018-07-165-10/+10
| | | | | | | | | | | | F9K1115v2 has a kernel partition size of 1408 kB. Since kernel 4.9.x+ the kernel image for this device compiled had exceeded the kernel partition size limit and thus failing size check. The kernel image generated for this device under ar71xx tiny target is 1329.67 kB < 1408 kB. Signed-off-by: Kin Chan <kcchan1@outlook.com>
* librpc: add host build to install h files needed for nfs-kernel-server to ↵Peter Wagner2018-07-161-0/+9
| | | | | | get compiled Signed-off-by: Peter Wagner <tripolar@gmx.at>
* ramips: Use dts alias based status ledChuanhong Guo2018-07-16208-555/+1035
| | | | | | Also fix several typos in led node name. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: insmod phy-broadcom module during preinitSteffen Förster2018-07-161-1/+1
| | | | | | | | | Some HP Thin clients use the broadcom nextreme chip as integrated NIC. It is connected via PCI express and will only be found automatically if phy-broadcom is loaded before tg3. This small change makes the thin client usable for Freifunk with gluon out of the box. Signed-off-by: Steffen Förster <steffen@chemnitz.freifunk.net>
* popt: Replace dead upstream site with mirrorDaniel Engberg2018-07-161-1/+1
| | | | | | | We can safely assume by now that rpm5.org is dead and isn't coming back so just add another mirror instead. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/utils/f2fs-tools: Update to 1.11.0Daniel Engberg2018-07-161-2/+2
| | | | | | Update f2fs-tools to 1.11.0 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/utils/e2fsprogs: Update to 1.44.3Daniel Engberg2018-07-161-4/+4
| | | | | | | | | | | | | | | Update e2fsprogs to 1.44.3 Enable threads Enable LTO Numbers on mips_24kc (a few packages): Old --> New --> LTO and threads e2fsprogs_*_mips_24kc.ipk: 173 --> 174 --> 154kbyte libblkid_*_mips_24kc.ipk: 114 --> 114 --> 114kbyte libext2fs_*_mips_24kc.ipk: 138 --> 139 --> 139kbyte Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* ar71xx: add support for MikroTik RB931-2nDThibaut VARÈNE2018-07-169-2/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the MikroTik RB931-2nD (hAP mini): https://mikrotik.com/product/RB931-2nD Specifications: * SoC: Qualcomm QCA9533 (650MHz) * RAM: 32MiB * Storage: 16MiB SPI NOR flash * Ethernet: 3x100M * Wireless: QCA9533 built-in, dual-chain 802.11b/g/n Installation: 1. Setup a DHCP/BOOTP Server with the following parameters: * DHCP-Option 66 (TFTP server name): pointing to a local TFTP server within the same subnet of the DHCP range * DHCP-Option 67 (Bootfile-Name): matching the initramfs filename of the to be booted image. The usable intramfs files are: - openwrt-ar71xx-mikrotik-vmlinux-initramfs.elf - openwrt-ar71xx-mikrotik-vmlinux-initramfs-lzma.elf - openwrt-ar71xx-mikrotik-rb-nor-flash-16M-initramfs-kernel.bin 2. Press the reset button on the board and keep that pressed. 3. Connect the board to your local network via its Internet port. 4. Release the button after the LEDs on the board are turned off. Now the board should load and start the initramfs image from the TFTP server. 5. Now connect the board via either of its LAN ports (2 or 3). 6. Upload the sysupgrade image to the board with scp: $ scp openwrt-ar71xx-mikrotik-rb-nor-flash-16M-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/fw.bin 7. Log in to the running system listening on 192.168.1.1 via ssh as root (without password): $ ssh root@192.168.1.1 8. Flash the uploaded firmware file from the ssh session via the sysupgrade command: root@OpenWrt:~# sysupgrade /tmp/fw.bin Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* kernel: leds-apu2 remove boardname checkLukas Mrtvy2018-07-161-12/+0
| | | | | | | 'In different versions of coreboot are different names of apu boardname. No need to check boardname to load module.' Signed-off-by: Lukas Mrtvy <lukas.mrtvy@gmail.com>
* brcm63xx: initial support for Sky SR102 routerAndrius Štikonas2018-07-167-0/+236
| | | | | | | | | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. SOC: BCM63168 (BMIPS4350 V8.0 @400MHz) Flash size: 16 MiB RAM size: 128 MiB Heavily based on patch for OpenWRT Chaos Chalmer. Original patch and more info can be found at: https://openwrt.org/toh/sky/sr102 Known issues: - Wireless and ADSL modem are not working. Signed-off-by: Andrius Štikonas <andrius@stikonas.eu>
* apm821xx: attempt to fix sata access freezesChristian Lamparter2018-07-161-0/+25
| | | | | | | | | | | The original vendor's driver programmed the dma controller's AHB HPROT values to enable bufferable, privileged mode. This along with the "same priorty for both channels" could very well fix the freezes that have been reported on the forum by @ticerex and @takimata. <https://forum.lede-project.org/t/wd-mybook-live-duo-two-disks/16195/46> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kmod-sched-cake: bump to 20180716Kevin Darbyshire-Bryant2018-07-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bump to the latest cake recipe. This backports tc class support to kernel 4.9 and other than conditional kernel compilation pre-processor macros represents the cake that has gone upstream into kernel 4.19. Loud cheer! Fun may be had by changing cake tin classification for packets on ingress. e.g. tc filter add dev ifb4eth0 parent 800b: protocol ip u32 match \ ip dport 6981 0xffff action skbedit priority 800b:1 Where 800b: represents the filter handle for the ifb obtained by 'tc qdisc' and the 1 from 800b:1 represents the cake tin number. So the above example puts all incoming packets destined for port 6981 into the BULK (lowest priority) tin. f39ab9a Obey tin_order for tc filter classifiers 1e2473f Clean up after latest backport. 82531d0 Reorder includes to fix out of tree compilation 52cbc00 Code style cleanup 6cdb496 Fix argument order for NL_SET_ERR_MSG_ATTR() cab17b6 Remove duplicate call to qdisc_watchdog_init() 71c7991 Merge branch 'backport-classful' 32aa7fb Fix compilation on Linux 4.9 9f8fe7a Fix compilation on Linux 4.14 ceab7a3 Rework filter classification aad5436 Fixed version of class stats be1c549 Add cake-specific class stats 483399d Use tin_order for class dumps 80dc129 Add class dumping 0c8e6c1 Fix dropping when using filters c220493 Add the minimum class ops 5ed54d2 Start implementing tc filter/class support Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* tools/e2fsprogs: Update to 1.44.3Daniel Engberg2018-07-161-2/+2
| | | | | | Update e2fsprogs to 1.44.3 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* apm821xx: fix usb-otg on 4.14Christian Lamparter2018-07-161-1/+1
| | | | | | | Starting with 4.14, the "amcc,dwc-otg" needs to be used in order to get the usb-otg to work. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* dropbear: close all active clients on shutdownChristian Schoenebeck2018-07-161-0/+5
| | | | | | | | | | | | | | | | | | | | Override the default shutdown action (stop) and close all processes of dropbear Since commit 498fe85, the stop action only closes the process that's listening for new connections, maintaining the ones with existing clients. This poses a problem when restarting or shutting-down a device, because the connections with existing SSH clients, like OpenSSH, are not properly closed, causing them to hang. This situation can be avoided by closing all dropbear processes when shutting-down the system, which closes properly the connections with current clients. Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com> [Luis: Rework commit message] Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* mtd: improve check for TRX header being already fixedRafał Miłecki2018-07-152-8/+9
| | | | | | | | | | | First of all lengths should be compared after checking all blocks for being good/bad. It's because requested length may differ from a final one if there were some bad blocks. Secondly it makes sense to also compare crc32 since we already have a new one calculated. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* curl: Update to 7.61.0Daniel Engberg2018-07-151-5/+5
| | | | | | Update curl to 7.61.0 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* odhcp6c: add noserverunicast config option for broken DHCPv6 serversHans Dedecker2018-07-152-6/+9
| | | | | | | | | Fix broken DHCPv6 servers which provide the server unicast option but do not reply on DHCPv6 renew messages directed to the IPv6 address contained in the server unicast option whihc results in broken IPv6 connectivity. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mtd: support bad blocks within the mtd_fixtrx()Rafał Miłecki2018-07-152-7/+29
| | | | | | | | | | | | | | | | Reading MTD data with (p)read doesn't return any error when accessing bad block. As the result, with current code, CRC32 covers "data" stored in bad blocks. That behavior doesn't match CFE's one (bootloader simply skips bad blocks) and may result in: 1) Invalid CRC32 2) CFE refusing to boot firmware with a following error: Boot program checksum is invalid Fix that problem by checking every block before reading its content. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* include/prereq-build.mk: explicitly check for -f flag when using busybox timeMatthias Schiffer2018-07-141-2/+2
| | | | | | | On Debian, busybox does have a time applet, but it does not support the -f flag. Catch this in prereq check to give users to proper error message. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* include/kernel-build.mk: fix kernel rebuild on backport patch changesMatthias Schiffer2018-07-141-1/+1
| | | | | | | | An incorrect variable name was referenced in KERNEL_FILE_DEPENDS, leading to the omission of the backport-* patch dirs in the generation of the prepared stamp name. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: backport page fragment API changes from 4.10+ to 4.9Felix Fietkau2018-07-143-0/+291
| | | | | | mt76 now relies on this API Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ppp: add missing -fPIC to rp-pppoe.so CFLAGSFelix Fietkau2018-07-141-0/+11
| | | | | | Fixes build error with LTO Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: ethernet: disable fraglist supportFelix Fietkau2018-07-141-1/+1
| | | | | | | The code has some remaining issues that cause ethernet hangs, so disable it for now until we can get it fixed Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ubus: compile with LTO enabledFelix Fietkau2018-07-131-1/+2
| | | | | | Reduces total .ipk size by about 1k Signed-off-by: Felix Fietkau <nbd@nbd.name>
* procd: compile with LTO enabledFelix Fietkau2018-07-131-0/+3
| | | | | | Reduces .ipk size on MIPS from 42k to 39k Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dropbear: compile with LTO enabledFelix Fietkau2018-07-132-2/+35
| | | | | | Reduces size of the .ipk on MIPS from 87k to 84k Signed-off-by: Felix Fietkau <nbd@nbd.name>
* firewall: compile with LTO enabledFelix Fietkau2018-07-131-2/+2
| | | | | | Reduces .ipk size on MIPS from 41.6k to 41.1k Signed-off-by: Felix Fietkau <nbd@nbd.name>
* iw: compile with LTO enabledFelix Fietkau2018-07-131-2/+3
| | | | | | Reduces .ipk size on MIPS from 34k to 33k Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ppp: compile with LTO enabledFelix Fietkau2018-07-131-2/+2
| | | | | | Reduces .ipk size on MIPS from 98.5k to 98k Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ppp: fix linker flags for the radius pluginFelix Fietkau2018-07-131-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: compile with LTO enabledFelix Fietkau2018-07-131-1/+4
| | | | | | Reduces .ipk size from 65k to 63k on MIPS Signed-off-by: Felix Fietkau <nbd@nbd.name>
* busybox: compile with LTO enabledFelix Fietkau2018-07-132-5/+42
| | | | | | | In the default configuration on MIPS, it reduces the .ipk size from 214k to 207k Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-07-131-3/+3
| | | | | | | | | 08719b1 mt76: use a per rx queue page fragment cache 4d2c565 mt76x2: reset HW before probe f622975 mt76x2: fix CCK protection control frame rate 6780375 mt76x2: add frame protection support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* include/feeds.mk: rework generation of opkg distfeeds.confMatthias Schiffer2018-07-124-24/+8
| | | | | | | Allow enabling/commenting/disabling each feed individually by using a tristate config symbol. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: fix feed list in PKG_CONFIG_DEPENDSMatthias Schiffer2018-07-121-1/+1
| | | | | | | FEEDS_ENABLED and FEEDS_DISABLED are derived from FEEDS_AVAILABLE, not FEEDS_INSTALLED. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* include/feeds.mk: always add available feeds to PACKAGE_SUBDIRSMatthias Schiffer2018-07-121-5/+1
| | | | | | | | | | | | | | | Setting CONFIG_FEED_... symbols combined two different effects: Disabling a feed in the generated opkg distfeeds.conf, and omitting the feed from PACKAGE_SUBDIRS. It does not make sense to omit built feeds from PACKAGE_SUBDIRS, as it will only lead to packages that can be enabled in .config (and that will consequently be built) not to be found during rootfs creation, breaking the build. All feeds that packages are emitted to should simply always be added to PACKAGE_SUBDIRS instead; the CONFIG_FEED_... only configure the generated distfeeds.conf like this. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* scripts/feeds: add src-dummy methodMatthias Schiffer2018-07-121-1/+6
| | | | | | | | | The src-dummy method does not actually obtain any feed, but it can be used to insert addtional entries into the opkg distfeeds.conf. This is useful to make package feeds available to users without requiring the corresponding source feeds to be available during build. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ramips: ethernet: use own page_frag_cacheFelix Fietkau2018-07-122-3/+15
| | | | | | | | | | | | | | | | Using the NAPI or netdev frag cache along with other drivers can lead to 32 KiB pages being held for a long time, despite only being used for very few page fragment. This can happen if the ethernet driver grabs one or two fragments for rx ring refill, while other drivers use (and free up) the remaining fragments. The 32 KiB higher-order page can only be freed once all users have freed their fragments, which only happens after the rings of all drivers holding the fragments have wrapped around. Depending on the traffic patterns, this can waste a lot of memory and look a lot like a memory leak Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: ethernet: use skb_free_frag to free fragmentsFelix Fietkau2018-07-121-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: TP-Link TL-WR902AC v3: add missing wps buttonPeter Lundkvist2018-07-121-1/+7
| | | | Signed-off-by: Peter Lundkvist <peter.lundkvist@gmail.com>
* ramips: TP-Link TL-WR902AC v3: don't build factory imagePeter Lundkvist2018-07-121-1/+0
| | | | | | | | | | | | | | | | | | | | | The line that produces factory image was accidentally left by me while testing before inital commit. I came to the conclusion that flashing from OEM firmware does not work (seems to share this behavior with other tplinks based on mt7628). I have not done any further analysis, as I was unable to open the case and attach a serial port (too much glue). Maybe i will try once more. So the way to do initial flashing (or un-bricking) is to use the tftp-recover image. It is possible to revert to OEM firmware with tftp recovery; in this case the first 512 bytes the image file need to be cut off. Signed-off-by: Peter Lundkvist <peter.lundkvist@gmail.com> [add explaination provided via mail as commit message] Signed-off-by: Mathias Kresin <dev@kresin.me>
* tools: kernel2minor: update to latest versionMathias Kresin2018-07-121-3/+4
| | | | | | 9fa9190 create reproducible images Signed-off-by: Mathias Kresin <dev@kresin.me>
* config: extend small_flash featureAlex Maclean2018-07-125-6/+12
| | | | | | | | | | Extend the small_flash feature to disable swap, core dumps, and kernel debug info, and change the squashfs block size to 1024KiB. Also change squashfs fragment cache to 2 for small_flash to ease memory usage. Signed-off-by: Alex Maclean <monkeh@monkeh.net>
* kernel: only optimized for size if small_flashMathias Kresin2018-07-1229-40/+30
| | | | | | | | | | | | | | | | | | | | | | | | Add a new config option to allow to select the default compile optimization level for the kernel. Select the optimization for size by default if the small_flash feature is set. Otherwise "Optimize for performance" is set. Add the small_flash feature flag to all (sub)targets which had the optimization for size in their default kernel config. Remove CC_OPTIMIZE_FOR_* symbols from all kernel configs to apply the new setting. Exceptions to the above are: - lantiq, where the optimization for size is only required for the xway_legacy subtarget but was set for the whole target - mediatek, ramips/mt7620 & ramips/mt76x8 where boards should have plenty of space and an optimization for size doesn't make much sense - rb532, which has 128MByte flash Signed-off-by: Mathias Kresin <dev@kresin.me>
* ar71xx: move boards to tiny subtargetMathias Kresin2018-07-125-35/+36
| | | | | | | Move boards to the tiny subtarget which break the build if the kernel is set to "Optimize for performance". Signed-off-by: Mathias Kresin <dev@kresin.me>
* verbose.mk: quote SUBMAKE options李国2018-07-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | build openwrt on centos 6 I should use devtoolset-3 to get gcc 4.9, but it fail when make menuconfig. so I have to give option HOSTCC='gcc -Wl,--copy-dt-needed-entries' to make. But it passed to sub make to HOSTCC=gcc as micro SUBMAKE expand to HOSTCC=gcc -Wl,--copy-dt-needed-entries. This patch fix this issue. make -C build menuconfig HOSTCC='gcc -Wl,--copy-dt-needed-entries' V='1' make: Entering directory `/work/openwrt/openwrt/build' /opt/rh/devtoolset-3/root/usr/libexec/gcc/x86_64-redhat-linux/4.9.2/ld: lxdialog/checklist.o: undefined reference to symbol 'acs_map' //lib64/libtinfo.so.5: error adding symbols: DSO missing from command line collect2: error: ld returned 1 exit status make[1]: *** [mconf] Error 1 make -s -C scripts/config all CC=gcc -Wl,--copy-dt-needed-entries: build failed. Please re-run make with -j1 V=s to see what's going on make: *** [scripts/config/mconf] Error 1 make: Leaving directory `/work/openwrt/openwrt/build' Signed-off-by: 李国 <uxgood.org@gmail.com>
* arc: Update variables substitutions in u-boot env filesEvgeniy Didin2018-07-122-6/+6
| | | | | | | | | | | | | In the latest version of u-boot (2018.05) there was a swith to Hush shell for ARC AXS10x boards(arc770/archs38): commit 9249d74781e1 ("ARC: AXS10x: Enable hush shell"). In Hush shell using "$()" to declare envitonment variables is forbidden, instead of this "${}" need to be used. Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: John Crispin <john@phrozen.org>
* mediatek: Fix memory node for U7623Kristian Evensen2018-07-121-4/+16
| | | | | | | | | | The changed applied to BananaPi R2 in upstream commit c0b0d540db1a, which was backported to 4.14 in 4.14.53, is also required for the U7623. Without updating the memory node, the board refuses to boot. Fixes: d0839e020d0a ("kernel: bump 4.14 to 4.14.53") Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
* kernel: gpio-nct5104d remove boardname checkLukáš Mrtvý2018-07-121-5/+0
| | | | | | | 'In different versions of coreboot are different names of apu boardname. No need to check boardname to load module.' Signed-off-by: Lukáš Mrtvý <lukas.mrtvy@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 11:28:06 +0000