aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* include/kernel.mk: build kmod packages with empty FILESMatthias Schiffer2018-04-121-4/+2
| | | | | | | | | | | kmod packages without FILES did not have an install step defined, leading to no package being built. This affected netfilter/iptables packages, which filter out builtin modules from FILES. Not building a package that it is selected in .config is problematic, as the generated empty package may be necessary to satisfy dependencies. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* tools/mpfr: Update to 4.0.1Daniel Engberg2018-04-111-2/+2
| | | | | | Update mpfr to 4.0.1 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/cmake: Update to 3.11.0Daniel Engberg2018-04-116-22/+6
| | | | | | | | Update cmake to 3.11.0 Remove 110-alpine_musl-compat.patch as it's integrated upstream Rename and refresh patches Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* packages/uboot-omap: bugfix: serial using ns16550 fifo not enabledAlexander Couzens2018-04-112-1/+310
| | | | | | | | The serial was working before, but not when doing copy&pasting longer commands in a short time. Fixes: a4def18f29e1 ("uboot-omap: Update to u-boot v2017.01") Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* omap: kernel update and switch to 4.14Lucian Cristian2018-04-112-1/+737
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* ar71xx: increase kernel partition size for CPE/WBS 210/510Matthias Schiffer2018-04-102-9/+9
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* firmware-utils: tplink-safeloader: move CPE/WBS 210/510 version metainfo to ↵Matthias Schiffer2018-04-101-20/+20
| | | | | | | | | the end Having the metainfo between kernel and rootfs prevents us from resizing the kernel partition as necessary. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: sysupgrade: improve CPE/WBS 210/510 validation, add new metadata offsetMatthias Schiffer2018-04-101-12/+20
| | | | | | | | | Previously, tplink_pharos_check_image() would accept any image with ELF magic and only non-printable data in the support-list, as in this case the while-read loop would not run at all. Add the new support-list offset and ensure an image is only accepted when the model string is actually found. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: increase kernel partition size for UniFi AP Pro and Outdoor+, enable ↵Matthias Schiffer2018-04-101-2/+4
| | | | | | | | devices again Tested on UAP Outdoor+. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: limit Ethernet speed of UBNT Airmax M (XM) devices to 100Mbit/sMatthias Schiffer2018-04-101-0/+2
| | | | | | | | | Some Airmax devices can establish a Gigabit link even though the MAC only supports 10/100 MBit/s, leading to broken connectivity. Prevent this from happening by limiting the speed to 100MBit/s. Fixes: FS#296 Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* iptables: split physdev match out as a separate packageMatthias Schiffer2018-04-093-4/+30
| | | | | | | Split physdev match out of ipt-extra to allow installing ipt-extra without pulling in br-netfilter. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: kmod-ebtables: do not depend on kmod-br-netfilterMatthias Schiffer2018-04-091-1/+1
| | | | | | | While ebtables can be combined with br-netfilter, there is no good reason to make it a dependency. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: unhide kmod-br-netfilterMatthias Schiffer2018-04-091-1/+0
| | | | | | | kmod-br-netfilter is not only a support module, but can be useful on its own, using the net.bridge.bridge-nf-call-* sysctls. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: change dependency of kmod-ebtables-* on kmod-ebtables to selectingMatthias Schiffer2018-04-091-1/+1
| | | | | | | | Non-selecting dependencies easily lead to Kconfig failures due to recursive dependencies. We hit such an issue in Gluon; the easiest fix is to make the dependency selecting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* dnsmasq: remove example domains from rfc6761.conf (FS#1447)Hans Dedecker2018-04-092-5/+1
| | | | | | | | | | | | RFC6771 does not exclude the forwarding of the example domain as it states : "Caching DNS servers SHOULD NOT recognize example names as special and SHOULD resolve them normally." Example domains cannot be assigned to any user or person by DNS registrars as they're registered in perpetuity to IANA meaning they can be resolved; therefore let's remove the example domains from the rfc6761.conf file. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcpd: update to latest git HEADHans Dedecker2018-04-091-4/+4
| | | | | | 31f217f router: improve RFC7084 compliancy Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mt76: update to the latest versionFelix Fietkau2018-04-091-3/+3
| | | | | | | | | | | | | | | | | | | c66094e mt76x2: fix possible NULL pointer dereferencing in mt76x2_tx() 249fa2d mt76x2: fix warning in ieee80211_get_key_rx_seq() 54d6710 mt76: use mt76_poll_msec routine in mt76pci_load_firmware() eb359f1 mt76x2: remove unnecessary len variable in mt76x2_eeprom_load() 7e6e00b mt76: initialize available_antennas_{tx,rx} info 6469dca mt76: add mt76_init_stream_cap routine ced433d mt76x2: add mac80211 {set,get}_antenna callbacks 238f3f1 mt76x2: remove warnings in mt76x2_mac_write_txwi() 880611b mt7603: main: fix warning in ieee80211_get_key_rx_seq() bc35af8 mt76x2: fix tssi initialization for 5GHz band 700ed20 mt76x2: make mt76x2_mac_reset routine static 6e7d5ce mt76x2: remove unnecessary MT_TX_ALC_CFG_4 configuration 5153ece mt76x2: set default values in TX_ALC_CFG_{1,2} for tempetaure compensation a3e7740 mt76x2: fix tx_alc_enabled check Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: replace linux,part-probe with a proper partitions subnodeRafał Miłecki2018-04-094-5/+20
| | | | | | | | | | | This solution is more upstream compatible as it only requires specifying of_match_table in the parser code and doesn't depend on linux,part-probe which is solution made generic by a LEDE downstream patch that can't be upstreamed. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Acked-by: John Crispin <john@phrozen.org>
* kernel: use accepted mtd patchset adding support for "compatible" stringRafał Miłecki2018-04-096-18/+50
| | | | | | | These patches were finally accepted and are already present in the Linus's tree. This should be good enough to make is "backport" material. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: rename pwm kernel moduleMathias Kresin2018-04-081-5/+5
| | | | | | | | | | | | | | With kernel 4.14 the OpenWrt specific module name collides with the upstream added module for Mediatek ARM Socs. During addition of preliminary support for kernel 4.14, the config symbol used by the out of tree driver was already renamed but the ramips kernel package wasn't updated. Fix the build error by updating the config and kernel module name for the kernel package. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add support for Zorlik ZL5900V2Vianney le Clément de Saint-Marcq2018-04-086-1/+109
| | | | | | | | | | | | | | | | | | | | | | | | The Zorlik ZL5900V2 is an unbranded clone of HAME MPR-A1/2. It is marketed as "3G Wi-Fi Router". Only the PCB has the model name "ZL5900V2" printed on it. Specifications: - Ralink RT5350F (360 MHz) - 32 MB RAM - 8 MB Flash - 802.11bgn 1T1R - 1x 10/100 Mbps Ethernet - 1x USB 2.0 (Type-A) - 5200 mAh battery The ramdisk image (not the squashfs sysupgrade image) can be flashed through the web interface (named "GoAhead") of the factory firmware. However, as the factory firmware does not cleanly unmount the rootfs before flashing, the device may hang instead of rebooting after successful write. Power cycling the device gets you in OpenWrt where the squashfs image may be flashed through normal sysupgrade procedure. Signed-off-by: Vianney le Clément de Saint-Marcq <code@quartic.eu>
* ramips: add support for the YouHua WR1200JSZheng Qian2018-04-086-1/+157
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | YouHua tech WR1200JS is an AC1200 router with 5 1Gb ports (4 Lan, 1 Wan) and 1 USB 2.0 port. Devices is base on MediaTek MT7621AT + MT7603E + MT7612E. Specification: - MT7612AT (880 MHz) - 128 MB of RAM - 16 MB of FLASH (SPI NOR) - 5x 10/100/1000 Mbps Ethernet - 2T2R 2.4 GHz (MT7603E) - 2T2R 5 GHz (MT7612E) - 1x USB 2.0 - 10x LED (Power 2G 5G WPS Internet LAN4-1 USB) - 3x button (reset wifi wps) - DC jack for main power input (12V) Installation: 1.) Press reset key 5 sec and restore the factory default 2.) Login webUI and change username to root and set a new password 3.) Visit http://192.168.2.254/adm/telnetd.shtml and turn on the telnet service 4.) Copy openwrt-ramips-mt7621-youhua_wr1200js-initramfs-kernel.bin to a usb pan 5.) Plug the usb pan to the router, telnet to the router and login by root 6.) cd /media/sda1 and check the initramfs file is there 7.) exec command: mtd_write write openwrt-ramips-mt7621-youhua_wr1200js-initramfs-kernel.bin Kernel 8.) reboot and visit 192.168.1.1 Signed-off-by: Zheng Qian <sotux82@gmail.com>
* ramips: add dwr-512 jboot firmware configurationGiuseppe Lippolis2018-04-085-15/+19
| | | | | | | | | | | | | | | | | | | | | The previous fw version require the replacement of the stock bootloader with u-boot. This prevent an easy stock restore of the original fw. Now a proper fw util has been developed to manage the stock jboot bootloader. Therefore make sense have a fw image for the stock bootloader. The old fw configuration (u-boot) is not compatible with the new one and will not be supported anymore. So at the end 2 image can be generated: 1) factory image with jboot bootloader openwrt-ramips-rt305x-dwr-512-b-squashfs-factory.bin 2) sysupgrade image with jboot bootloader openwrt-ramips-rt305x-dwr-512-b-squashfs-sysupgrade.bin Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
* ar8216: reduce latency even further for ar8327 chipsFelix Fietkau2018-04-081-2/+4
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar8216: reduce latency by inserting scheduling points into code hogging the CPUFelix Fietkau2018-04-081-2/+7
| | | | | | Should reduce network related latency caused by accessing MIB counters Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix usbphy DT nodes on linux 4.14Vianney le Clément de Saint-Marcq2018-04-077-25/+34
| | | | | | | | | | | | | | The Ralink USB PHY driver merged into mainline has a slightly different device tree binding than the patch that was used with linux 4.9. The new driver requires a `ralink,sysctl` node pointing to the `syscon` node. This patch also sets `#phy-cells` to 0, as recommended by the mainline documentation [1]. [1] Documentation/devicetree/bindings/phy/ralink-usb-phy.txt Signed-off-by: Vianney le Clément de Saint-Marcq <code@quartic.eu>
* libubox: update to the latest versionFelix Fietkau2018-04-071-3/+3
| | | | | | | | 42a8ecd jshn: fix format string for int64 type 92009b7 utils: ensure that byte-order conversion functions evaluate the argument only once ace6489 switch from typeof to the more portable __typeof__ Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert "libubox: update to the latest version"Felix Fietkau2018-04-071-3/+3
| | | | | | | This reverts commit def82714d92d124dc5376c340132392ff7a3d4a5. Needs further fixes Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libubox: update to the latest versionFelix Fietkau2018-04-071-3/+3
| | | | | | | 42a8ecd jshn: fix format string for int64 type 92009b7 utils: ensure that byte-order conversion functions evaluate the argument only once Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: add support for TP-Link Archer C60 v2Henryk Heisig2018-04-0715-4/+157
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link Archer C60 v2 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561 + QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Flash instruction (web): Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and use OEM System Tools - Firmware Upgrade site. Flash instruction (recovery): 1. Set PC to fixed IP address 192.168.0.66 2. Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery Flash instruction (under U-Boot, using UART): tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize reset Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ar71xx: add support for TP-Link TL-WR940N v6Robert Marko2018-04-068-17/+72
| | | | | | | | | Add support for TL-WR940N v6 board. It is pretty much the same as v5 except they only left WAN LED and removed other ones. Installation: flash factory image through WEB UI or use TFTP. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ar71xx: drop kernel 4.4 supportPiotr Dymacz2018-04-0697-8147/+0
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: change brand name WHQX to QxwlanPeng Zhang2018-04-065-16/+16
| | | | Signed-off-by: Peng Zhang <sd20@qxwlan.com>
* ar71xx: rework chipidea controller support, add QCA9531Piotr Dymacz2018-04-061-39/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | Rework (again) platform support for dual-role chipidea USB controller: - include support for QCA9531 - use correct EHCI block size - drop ar933x_usb_setup_ctrl_config() function - simplify code after previous "register chipidea only in device mode" change (fa22714181) Reworked patch was tested on devices with below QCA WiSOCs (signal/GPIO name with required bootstrap state for USB bus 0 in device mode): - AR9331 (GPIO13 pull-down) - AR9342 (RGMII_TXD1/ETXD1 pull-up) - AR9344 (GPIO20 pull-up) - QCA9531 (GPIO13 pull-up) - QCA9558 (GPIO13 pull-up) The only way to select device mode for bus 0 is to change SOC bootstrap configuration which is sampled only once, at hard reset. Likely, other models, like QCA9556 or AR9341, should also support dual-role USB mode but they were not tested. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ramips: add U-Boot env support for ALFA Network AC1200RMPiotr Dymacz2018-04-063-2/+8
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: fix ALFA Network AWUSFREE1 supportPiotr Dymacz2018-04-061-7/+9
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ramips: image: drop redundant SUPPORTED_DEVICESPiotr Dymacz2018-04-062-2/+0
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ramips: fix build error caused by missing ifdef guard in hwnat codeJohn Crispin2018-04-061-1/+4
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ramips: implement hardware NAT offload for MT7621John Crispin2018-04-068-3/+985
| | | | | | | | | | Supports IPv4 flow offloading on MT7621 for Routing, SNAT and DNAT Supported are regular ethernet->ethernet connections, including one 802.1q VLAN and/or PPPoE encapsulation Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: drop linux 4.9 supportFelix Fietkau2018-04-0685-27704/+0
| | | | | | | 4.14 has been tested a lot by a number of users, and we want to use it for the release. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: switch to linux 4.14Felix Fietkau2018-04-061-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* busybox: update to 1.28.3Hannu Nyman2018-04-051-2/+2
| | | | | | | | | Bug fix release. 1.28.3 has fixes for * ash and hush (do not leave stray open file destriptors in children), * cpio (fix for symlink extraction), * grep ("grep -Fw a" was matching "aa"). Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* odhcp6c: update to latest git HEADHans Dedecker2018-04-051-4/+4
| | | | | | | | 74b5a3 script: fix possible negative delay 473f248 dhcpv6: always trigger script update in case of IA updates ea18935 ra: rework route information option handling Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ramips: mtk-mmc: don't advertise highmem support.NeilBrown2018-04-052-0/+2
| | | | | | | | | | | | | | | | of_dma_configure() sets a default ->dma_mask of DMA_BIT_MASK(32), claiming devices can DMA from the full 32bit address space. The mtk-mmc driver does not support access to highmem pages, so it is really limited to the bottom 512M (actually 448M due to 64M of IO space). Setting ->dma_mask to NULL causes mmc_setup_queue() to fall-back to using BLK_BOUNCE_HIGH to tell the block layer to use a bounce-buffer for any highmem pages requiring IO. Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix xtables flow offload issuesFelix Fietkau2018-04-051-4/+5
| | | | | | | - avoid using garbage stack values as dst pointer if lookup fails - provide the source address for ipv6 dst lookup Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix BUG_ON on mtk-mmc driver probeFelix Fietkau2018-04-052-6/+2
| | | | | | | Our .dts files only have one device defined and this is unlikely to change, so statically initialize host->id to 0. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: move mtk-mmc driver code out of patches-*/ and into files-*/Felix Fietkau2018-04-0516-9557/+9515
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* firewall: update to the latest version, adds hw flow offload supportFelix Fietkau2018-04-051-3/+3
| | | | | | 35b3e74 defaults: add support for setting --hw on the xt_FLOWOFFLOAD rule Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add support for enabling hardware flow offload via iptablesFelix Fietkau2018-04-052-6/+116
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add hardware offload patch for flow tables supportFelix Fietkau2018-04-057-2/+1143
| | | | | | Supports offloading through VLAN, bridge and PPPoE devices as well Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 12:21:03 +0000