aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* layerscape: fix adjust_link for 10G & 2.5GYangbo Lu2017-02-131-0/+48
| | | | | | Added a linux-4.4 patch to fix adjust_link for 10G & 2.5G. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* ramips: correct switch configuration for Newifi D1Chuanhong Guo2017-02-131-4/+1
| | | | Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* lantiq: fix patching the wifi mac address on BTHOMEHUBV3AMartin Blumenstingl2017-02-131-1/+1
| | | | | | | | | | | | | | | | | | | The firmware hotplug script tries to read the mac address from a partition with the name "uboot-env" which does not exist (instead it's name is uboot_env). This broke calculation of the new checksum (after patching the mac address) which resulted in ath9k refusing to use the EEPROM data. The original error reported by ath9k was: PCI: Enabling device 0000:00:0e.0 (0000 -> 0002) ath: phy0: Bad EEPROM checksum 0x2523 ath: phy0: Unable to initialize hardware; initialization status: -22 ath9k 0000:00:0e.0: Failed to initialize device Fixes: a20616863d32d9 ("lantiq: use ath9k device tree bindings binding/owl-loader") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* netifd: update to git HEAD versionHans Dedecker2017-02-121-3/+3
| | | | | | | | | | f107656 netifd: Add option to configure locktime for each device cdc0e80 interface: add prefix assignment priority support 6397f5e device: add veth support 6228d0f wireless: fix _wireless_add_process 7cc2f10 treewide: fix white space errors Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mac80211: refresh patchesFelix Fietkau2017-02-124-95/+106
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport upstream fix for CSA in IBSS modeKoen Vandeputte2017-02-121-0/+34
| | | | | | Allows to change channels on-the-fly using CSA when using IBSS. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: fix platform_find_rootfspart()Thibaut VARENE2017-02-121-1/+1
| | | | | | | | platform_find_rootfspart() fails if the kernel partition comes before the rootfs partition. The proposed patch fixes this while preserving what I understand was the original idea: stop at first match. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* build: fix dependency of kernel_menuconfig targetBaptiste Jonglez2017-02-121-1/+1
| | | | | | | | | | | | When running "make kernel_menuconfig" in a clean tree, it fails with: make[1]: *** No rule to make target 'tools/quilt/install'. Stop. Replacing the dependency with 'tools/quilt/compile' fixes the issue (quilt and all its prerequisites will be built, and quilt will be installed in staging_dir). Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* ath9k: fix various issues in the airtime-fairness implementationFelix Fietkau2017-02-121-0/+107
| | | | | | | Effects of the bugs could include memory corruption, tx hangs, kernel crahes, possibly other things as well Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix kmod-rxrpc with kernel 4.9Hauke Mehrtens2017-02-122-2/+5
| | | | | | rxkad will be build into af-rxrpc now and is of type boolean. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: fix compile error on linux 4.9 with CONFIG_KALLSYMS disabledMartin Blumenstingl2017-02-121-2/+3
| | | | | | | | Upstream linux commit 7523e4dc5057e "module: use a structure to encapsulate layout." moves some of the struct module members into a separate struct module_layout. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatchHauke Mehrtens2017-02-122-0/+70
| | | | | | | This backports the following fix to our mips IRQ stack patches: https://patchwork.linux-mips.org/patch/15110/ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: fix section mismatch in PCIe driverHauke Mehrtens2017-02-122-2/+2
| | | | | | | Do not put the probe function into the __init section, but use the normal section. This fixes a section mismatch warning. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ltq-ptm: use netif_trans_update() only for kernel >= 4.7Hauke Mehrtens2017-02-122-4/+4
| | | | | | | This fixes a bug introduced in commit c7ce9908bd58af60153716aa64a7251 "ltq-ptm: fix build with kernel 4.9" Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: add support for kernel 4.9Hauke Mehrtens2017-02-1137-1/+16803
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patches were dropped because they are already applied upstream: 0012-pinctrl-lantiq-fix-up-pinmux.patch 0013-MTD-lantiq-xway-fix-invalid-operator.patch 0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch 0015-MTD-lantiq-xway-remove-endless-loop.patch 0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch 0017-MTD-xway-fix-nand-locking.patch 0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch 0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch 0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch 0047-irq-fixes.patch 0047-mtd-plat-nand-pass-of-node.patch 0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch 0120-MIPS-lantiq-add-support-for-device-tree-file-from-bo.patch 0121-MIPS-lantiq-make-it-possible-to-build-in-no-device-t.patch 122-MIPS-store-the-appended-dtb-address-in-a-variable.patch The PHY driver was reduced to the code adding the LED configuration, the rest is already upstream: 0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch The SPI driver was replaced with the version pending for upstream inclusion: New driver: 0090-spi-add-transfer_status-callback.patch 0091-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-controller.patch Old driver: 0100-spi-add-support-for-Lantiq-SPI-controller.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ltq-vmmc: fix build with kernel 4.9Hauke Mehrtens2017-02-116-68/+74
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ltq-ptm: fix build with kernel 4.9Hauke Mehrtens2017-02-112-0/+16
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add missing config option for kernel 4.9Hauke Mehrtens2017-02-111-0/+1
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add rest controller option for kernel 4.9Hauke Mehrtens2017-02-111-0/+9
| | | | | | | Deactivate the reset controllers which could be activated on kernel 4.9 by default. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* glibc: update to version 2.25Felix Fietkau2017-02-112-12/+7
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* glibc: override default rpath to /lib:/usr/libFelix Fietkau2017-02-111-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* cns3xxx: clean up patchesFelix Fietkau2017-02-113-73/+13
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kirkwood: add ZyXEL NSA325 deviceAlberto Bursi2017-02-115-2/+254
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add ZyXEL NSA325 2-Bay Media Server The ZyXEL NSA325 device is a Kirkwood based NAS: - SoC: Marvell 88F6702 1600Mhz - SDRAM memory: 512MB DDR2 400Mhz - Gigabit ethernet: Marvell Alaska - Flash memory: 128MB - 1 Power button - 1 Power LED (blue) - 5 Status LED (green/red) - 1 Copy/Sync button - 1 Reset button - 2 SATA II ports (internal) - 2 USB 2.0 ports (back) - 1 USB 3.0 port (front) - Fan (fixed speed) - hardware watchdog in a mcu Basically a bigger, more powerful version of NSA310, installation is the same as they share the same flash layout. A notable difference is that there is a hardware watchdog in a mcu on the board, which is disabled by default in the LEDE u-boot. The watchdog is also disabled with a GPIO activation through raw register change when kwbooting or it would reset the board before the new uboot was transferred. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it> Signed-off-by: Felix Fietkau <nbd@nbd.name> [remove dead code]
* uboot-kirkwood: add Zyxel NSA325 ubootAlberto Bursi2017-02-112-0/+714
| | | | | | add uboot for NSA325 Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* uboot-envtools: add nsa325 envsAlberto Bursi2017-02-111-0/+1
| | | | | | adding nsa325 envs for consistency with other kirkwoods Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* kirkwood: cleanup nsa310b mac address extractionAlberto Bursi2017-02-111-1/+1
| | | | | | | | | switch nsa310b mac address reading to mtd_get_mac_ascii helper as it seems the fw_env.config file is created way later than when network is set up, when I tested I still had that file included in the image through /files folder. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* apm821xx: add linux 4.9 apm821xx patchesChristian Lamparter2017-02-1114-1/+2573
| | | | | | This patch updates the apm821xx target to use the 4.9 kernel. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
* gdb: update to version 7.12.1, fix glibc 2.25 build issuesFelix Fietkau2017-02-114-4/+80
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* glibc: use default PATCH_DIRFelix Fietkau2017-02-113-2/+0
| | | | | | | Version configuration is gone, so version specific patch directories are not necessary either. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86: Add configuration back for Traverse GeosDavid Woodhouse2017-02-112-0/+45
| | | | | | | | When we merged all the Geode boards into one generic target, the default network and LED configuration was lost. Put it back. Fixes: 9e0759ea2653 ("x86: merge all geode based subtargets into one") Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* pppd: fix compile issues with glibc 2.25Felix Fietkau2017-02-112-46/+28
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix linux 4.9 host tools portability issuesFelix Fietkau2017-02-111-0/+28
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* perf: avoid picking up a dependency on libunwindFelix Fietkau2017-02-111-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ugps: update to the latest version, fixes build error with glibcFelix Fietkau2017-02-111-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tcpdump: fix tcpdump-mini build on glibc 2.25Felix Fietkau2017-02-111-30/+7
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* fstools: update to the latest versionFelix Fietkau2017-02-111-3/+3
| | | | | | Fixes compatibility issues with glibc 2.25 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* procd: update to the latest versionFelix Fietkau2017-02-111-3/+3
| | | | | | Fixes compatibility issues with glibc 2.25 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* toolchain/uclibc: Bump version to 1.0.22Alexey Brodkin2017-02-113-21/+5
| | | | | | | | | | | | | | Important change was made in 1.0.18: all sub-libs were merged in one and only libc similarly to musl. See [1] for more details. To support that we had to remove refences to those sub-libs like libpthread, libcrypt, libdl, libm, libutil etc. [1] http://cgit.uclibc-ng.org/cgi/cgit/uclibc-ng.git/commit/?id=29ff9055c80efe77a7130767a9fcb3ab8c67e8ce Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
* toolchain/uclibc: Fix unmanned configuration with "V=s"Alexey Brodkin2017-02-111-1/+1
| | | | | | | | | | | | | | | | | Currently on attempt to configure uClibc with "V=s" user is prompted to answer on configuration questions. Major inconvenience here is build procedure get paused until user answers all questions. That happens because not all symbols are defined in our .config. Solution is as simple as usage of "olddefconfig" target instead of simple "oldconfig". In that case default values get silently set for symbols not defined by our .config explicitly. We haven't noticed that subtle issue before because without "V=s" what we do is "make oldconfig < /dev/null" which automatically answers all questions :) Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
* toolchain: remove separate prepare/ stepFelix Fietkau2017-02-111-8/+1
| | | | | | It was a leftover from an old obsoleted dependency chain Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: move to Linux 4.9 kernelTim Harvey2017-02-114-4/+535
| | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: remove libc version config codeFelix Fietkau2017-02-118-62/+5
| | | | | | We only support one version per libc type Signed-off-by: Felix Fietkau <nbd@nbd.name>
* cns3xxx: add back watchdog supportFelix Fietkau2017-02-114-68/+150
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ARC: use -mcpu=XXX instead of obsolete -mXXXAlexey Brodkin2017-02-111-2/+2
| | | | | | | | | | | | | | -mXXX option is deprecated already in arc-2016.03 toolchain and removed completely starting from arc-2016.09. Direct replacement is -mcpu=XXX which is already supported by arc-2016.03 used today in Lede. With that change we'll be ready for ARC toolchain update still keeping everything working with current tools. Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: John Crispin <john@phrozen.org>
* kernel: add missing symbols to generic/config-4.9John Crispin2017-02-111-0/+4
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* kernel: fix 304-mips_disable_fpu.patch for v4.9John Crispin2017-02-111-9/+42
| | | | | | | the function prototype has changed, make the new stub consistent with this change. Signed-off-by: John Crispin <john@phrozen.org>
* dropbear: enable SHA256 HMACsJoseph C. Sible2017-02-101-3/+2
| | | | | | | The only HMACs currently available use MD5 and SHA1, both of which have known weaknesses. We already compile in the SHA256 code since we use Curve25519 by default, so there's no significant size penalty to enabling this. Signed-off-by: Joseph C. Sible <josephcsible@users.noreply.github.com>
* cns3xxx: switch to linux 4.9Koen Vandeputte2017-02-101-1/+1
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* cns3xxx: add preliminary 4.9 supportKoen Vandeputte2017-02-1027-0/+1420
| | | | | | | | | | | | | | | Adds preliminary kernel 4.9 support for this target. - Refreshed/Updated all patches Added 3 new patches: - 093 --> Add virtual PCI MMIO mapping - 230 --> Remove deprecated code - 240 --> Rework AT24 eeprom code to use the new NVMEM API Compiled & tested on cns3xxx (gw2388) Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* build: drop circular dependencyFelix Fietkau2017-02-101-1/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 01:23:53 +0000