aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx, firmware-utils: split ubdev01 flash layout from XMFelix Fietkau2016-02-292-1/+7
| | | | | | | | | The ubdev01 profile defines its own MTDPARTS with smaller firmware partition, so give it its own UBNT_BOARD in mkfwimage. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 48828
* firmware-utils: mkfwimage: add -Wall, fix obvious bugs causing compile warningsFelix Fietkau2016-02-292-8/+6
| | | | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 48827
* gcc: update gcc 5 to version 5.3.0Felix Fietkau2016-02-2939-65/+30
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48826
* mt76: update to the latest version, adds a number of stability fixesFelix Fietkau2016-02-281-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48814
* ramips: add sysupgrade support for mt7628Felix Fietkau2016-02-281-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48813
* ramips: create device tree node for MT7628 WMAC in preparation for future ↵Felix Fietkau2016-02-282-0/+17
| | | | | | | | work on driver support in mt76 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48812
* mt76: update to the latest version, enable MT7603 support (very basic, needs ↵Felix Fietkau2016-02-281-5/+8
| | | | | | | | testing and debugging work) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48811
* bsdiff: add bsdiff and bspatch tool packageHauke Mehrtens2016-02-272-0/+162
| | | | | | | | | This will be used to create a diff between the Lantiq annex A and the annex B firmware. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48810
* scripts/download.pl: fix sha256 hash command (#21931)Felix Fietkau2016-02-271-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48809
* Revert "ar71xx: WNR612v2: exclude USB modules from image"Felix Fietkau2016-02-261-1/+0
| | | | | | | | This reverts commit r48778. The issue has now been fixed properly Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48808
* include/target.mk: fix profile defaultsFelix Fietkau2016-02-261-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48807
* base-files: support passing mode to ucidef_set_led_netdev()Jo-Philipp Wich2016-02-263-4/+6
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 48806
* kernel: use upstream accepted bcm47xxpart patchesRafał Miłecki2016-02-262-3/+6
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48805
* toolchain: use musl instead of glibc by default for mips64Felix Fietkau2016-02-261-4/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48804
* musl: add mips64 portFelix Fietkau2016-02-261-0/+2714
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48803
* kernel: disable MIPS VDSO by default until the cache issues have been resolvedFelix Fietkau2016-02-261-0/+21
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48802
* dnsmasq: add host-specific lease time option for static hostsJohn Crispin2016-02-262-3/+5
| | | | | | | | | | | | | | | | | | | | | | | Enable setting a host-specific lease time for static hosts. The new option is called "leasetime" and the format is similar as for the default lease time: e.g. 12h, 3d, infinite Default lease time is used for all hosts for which there is no host-specific definition. The option is added to /etc/config/dhcp for the selected hosts: config host option name 'Nexus' option mac 'd8:50:66:55:59:7c' option ip '192.168.1.245' option leasetime '2h' It gets appended to /var/etc/dnsmasq.conf like this: dhcp-host=d8:50:66:55:59:7c,192.168.1.245,Nexus,2h Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 48801
* dnsmasq: add dhcp relay optionJohn Crispin2016-02-261-0/+19
| | | | | | Signed-off-by: dbugnar <dnbugnar@ocedo.com> SVN-Revision: 48800
* procd: hotplug.json: allow passing hotplug events from all subsystemsJohn Crispin2016-02-261-12/+6
| | | | | | | | | | | There are time that programs need to be notified of events from subsystems that are not enumerated in the .json definition, e.g. QEMU guest agent by default requires /dev/virtio-ports/org.qemu.guest_agent.0 which is a symlink to /dev/vportMpN from virtio-ports subsystem. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 48799
* libubox: update to latest git HEADJohn Crispin2016-02-261-2/+2
| | | | | | | | adds isdir support to json_script Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 48798
* ar71xx: Renamed Gainstrong MiniBox profile to Gainstrong (manufacturer) and ↵John Crispin2016-02-261-1/+1
| | | | | | | | | | | | | | | | updated copyright This is the first patch of a series of three to tidy up the profiles for Gainstrong devices. Right now there are two Gainstrong profiles, each for a single device built by this manufacturer. This patch renames the MiniBox profile to Gainstrong and updates the copyright notice. The series applies cleanly to current trunk. Resent with the architecture in the subject, forgot that the first time. Signed-off by: Stijn Segers <francesco.borromini@inventati.org> SVN-Revision: 48797
* ramips: fix GPIO names for RT5350F-OLinuXino-EVBJohn Crispin2016-02-261-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hi, the board in subject (RT5350F-OLinuXino-EVB) still ships from vendor with a RC3 image built upon a .dts file which declares GPIO12 and GPIO14 as relay2 and relay1 respectively, as you can see from their rt5350f branch on GitHub. For some reason in the official stable build both the GPIOs are swapped and the wrong names are declared in the gpio-export directive. I'm submitting this patch which should roll back the wrong changes, so that we get backward compatibility with any script developed on RC3 which controls the relays. After patching correct operation is restored: root@OpenWrt:/# cat /sys/kernel/debug/gpio GPIOs 0-21, platform/10000600.gpio, 10000600.gpio: gpio-0 (button ) in hi gpio-12 (relay2 ) out lo gpio-14 (relay1 ) out lo Thank you, Signed-off-by: Lorenzo Cafaro <lorenzo@ibisco.net> SVN-Revision: 48796
* hotplug-preinit: remove superfluous `and`John Crispin2016-02-261-3/+1
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 48795
* mpc85xx/tl-wdr4900: correct address of the gpio controllerJohn Crispin2016-02-261-1/+1
| | | | | | | | since linux 3.19 the address of the gpio-controller changed Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 48794
* kernel/gpio_keys: load module on pre-initJohn Crispin2016-02-261-1/+1
| | | | | | | | fix rescue mode on wdr4900 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 48793
* kernel: deactivate the vdso gettimeofday function.Hauke Mehrtens2016-02-251-0/+9
| | | | | | | | | | The vdso version of this function has some problems with the cache. Very often it works on dated data which causes problem. We are currently working on fixing this in upstream Linux kernel. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48787
* linux-atm: activate format security checksHauke Mehrtens2016-02-253-14/+20
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48786
* ltq-vdsl-mei: activate format security checksHauke Mehrtens2016-02-252-1/+11
| | | | | | | | | This activates the format warnings in this package and that makes it possible to activate format-security checks. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48785
* strace: update to version 4.11Hauke Mehrtens2016-02-252-55/+2
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48784
* kernel: update kernel 4.4 to version 4.4.3Hauke Mehrtens2016-02-2530-316/+85
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48783
* mac80211: backport brcmfmac fix for primary channel in 80 MHz modeRafał Miłecki2016-02-252-1/+65
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48782
* mac80211: backport brcmfmac fix for sdio sg table alloc crashRafał Miłecki2016-02-252-0/+118
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48781
* toolchain/glibc: remove obsolete versionsFelix Fietkau2016-02-2518-1404/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48780
* ar71xx: WNR612v2: fix for random WLAN MACFelix Fietkau2016-02-251-1/+7
| | | | | | | | | | Fix for invalid/random WLAN MAC address in WNR612v2. Permanent platform MAC is calculated and assigned during system startup. WLAN MAC follows wired Ethernet interface addresses. This is the same fix as for WNR2000v3. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> SVN-Revision: 48779
* ar71xx: WNR612v2: exclude USB modules from imageFelix Fietkau2016-02-251-0/+1
| | | | | | | | | Netgear WNR612v2 has no USB port yet default system image includes USB kernel modules. This patch fixes that. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> SVN-Revision: 48778
* ar71xx: WNR2000v3: fix for random WLAN MACFelix Fietkau2016-02-251-6/+41
| | | | | | | | | | Fix for invalid/random WLAN MAC address in WNR2000v3. Permanent platform MAC is calculated and assigned during system startup. WLAN MAC follows wired Ethernet interface addresses. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> SVN-Revision: 48777
* base-files: add support for speed mask to switch config init scriptsFelix Fietkau2016-02-253-3/+9
| | | | | | | | | | | This patch adds extra parameter to switch LED trigger initialization functions. New functionality maintains backward compatibility, so calling functions without setting new speed_mask parameter works as expected. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> SVN-Revision: 48776
* switch: allow Ethernet port LEDs to show specific port speeds onlyFelix Fietkau2016-02-251-5/+99
| | | | | | | | | | | | | This patch adds speed_mask special file to LEDs connected to switch ports via 'switch' trigger. It allows to choose which speeds to signal when link is up. If router has more than one LED per port, they may light up differently depending on how fast connection is. Default setting is 'all speeds' so backward compatibility with system scripts (for example uci) is maintained. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> SVN-Revision: 48775
* switch: make LED port_mask file write handler use kstrtoul() functionFelix Fietkau2016-02-251-25/+16
| | | | | | | | | | | This patch changes swconfig_trig_port_mask_store() handler to utilize kstrtoul() function instead of call to obsolete simple_strtoul(). Thanks to this change, new handler takes less memory and makes port_mask special file accept not only hexadecimal, but also decimal and octal numbers. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> SVN-Revision: 48774
* kernel: crypto: add fsl CAAM packageJohn Crispin2016-02-251-0/+26
| | | | | | | | | Kernel package enables the Freescale CAAM (crypto accelerator and assurance module, aka SEC4). Sets kernel defaults for ringsize, intc, and debug. Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48773
* ramips: mt7620: fix failsafe switch configJohn Crispin2016-02-251-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | As indicated in the bug tracker[1], failsafe mode is broken on at least some devices using the mt7620 switch (and possibly mt7621). The thread explicitly mentions the Xiaomi MiWifi, and the Nexx WT3020, and an unspecified device using the mt7621 switch; the issue also applies to the Netgear EX2700. The problem is that failsafe mode uses eth0, but enable_vlan is always set to 1 by the switch driver. Connecting to and/or pinging the device fails. This patch fixes the failsafe preinit config, by making sure that vlan support is disabled. It currently only fixes the switch config on mt7620, but might apply to the mt7621 as well, so the patch has been designed with this in mind. A similar (line wrapped) patch was submitted in December by Simon Peter, but never accepted and/or discussed. This patch applies to both Chaos Calmer and trunk. [1] https://dev.openwrt.org/ticket/18768 Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> SVN-Revision: 48772
* ramips: build factory images for Netgear EX2700John Crispin2016-02-252-1/+27
| | | | | | | | | | | | | | | | This patch adds support for building factory and sysupgrade images for the Netgear EX2700 that don't require modification of u-boot environment variables. The bootloader on this device expects the kernel partition to end on a 64k block boundary. The last 64 byte of the kernel partition must contain a valid uImage header - in the stock firmware, this is the uImage header of the root filesystem. For this patch, we're using the uImage header of a 0 byte partition (ex2700-fakeroot.uImage). Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> SVN-Revision: 48771
* leds: support oneshot as well as timer triggersJohn Crispin2016-02-252-6/+15
| | | | | | | | | oneshot and timer have the same configuration options, just a different trigger name. Signed-off-by: Karl Palsson <karlp@etactica.com> SVN-Revision: 48770
* ar71xx: correct imagename for TPlink WA730REJohn Crispin2016-02-251-2/+2
| | | | | | | | - insert missing "-" to separate model and version Signed-off-by: Sven Roederer <devel-sven@geroedel.de> SVN-Revision: 48769
* ar71xx: correct imagename for TPlink WA701NDJohn Crispin2016-02-251-2/+2
| | | | | | | | - it seems there was never a 701N-model build Signed-off-by: Sven Roederer <devel-sven@geroedel.de> SVN-Revision: 48768
* ar71xx: matchup of TPlink WR841N(D)-namesJohn Crispin2016-02-251-8/+8
| | | | | | | | | | | | | - remove the suffix (N, ND) to indicate that the image is for all WR841-models - some of these models have a "N"-suffix, others have (ND)-suffix, but the boards are the same - only difference is the detachable antenna on "D"-models - discussed this idea to remove the suffix in IRC with jow and Borromini Signed-off-by: Sven Roederer <devel-sven@geroedel.de> SVN-Revision: 48767
* brcm2708: remove linux 4.1 supportJohn Crispin2016-02-25216-151539/+10
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 48766
* brcm2708: switch to linux 4.4 and update patchesJohn Crispin2016-02-25155-272/+5594
| | | | | | | | | As usual these patches were extracted from: https://github.com/raspberrypi/linux/commits/rpi-4.4.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 48765
* uboot-oxnas: fix typo leading to tool not being builtJohn Crispin2016-02-251-1/+1
| | | | | | | | Fixes #21907 Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 48764
* ltq-vdsl-app: Enable T1.413 in Annex A xTSE setJohn Crispin2016-02-251-1/+1
| | | | | | | | | Before r47933 Bit 1 (first bit) of xTSE Octet 1 (first octet) defaulted to 1, which allowed T1.413 to operate. Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> SVN-Revision: 48763
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 14:42:20 +0000