aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* apm821xx: replace recovery image for the MBL with initramfsChristian Lamparter2016-10-134-118/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch "images: bump default rootfs size to 256 MB" a1f83bad606411a561e8e60110c71232b1a28aa2 caused a crash during boot for the recovery images. This is because both variants of the MyBook Live only have 256MB of RAM and for the recovery option, the ext4 rootfs was simply stored in the RAMDISK. This patch replaces recovery image for the MBL with an initramfs kernel. In order to boot the initramfs (for recovery or development): 0. copy the initramfs and device tree into tftp's server directory # cp *-initramfs-kernel.bin to /tftp-server/mbl.bin # cp *-ext4-kernel.dtb to /tftp-server/fdt.bin 1. Connect the MyBook Live (Duo) serial port. (Warning! Use a 3.3v level shifter). 2. Hit Enter during u-boot and insert these three lines: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; # tftp ${kernel_addr_r} mbl.bin; tftp ${fdt_addr_r} fdt.bin # run addtty addmisc; bootm ${kernel_addr_r} - ${fdt_addr_r} Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: ext4: Add missing kmod-crypto-crc32c dependencydaniel2016-10-131-1/+2
| | | | | | | | | This fixes the following error when mounting a ext4 filesystem ---- [ 166.240000] EXT4-fs (sda1): Cannot load crc32c driver. ---- Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
* x86: 64: enable pci hotplug and acpipnpYousong Zhou2016-10-131-7/+9
| | | | | | | | | | | | | | | | | | | | | | This will allow dynamically adding/removing at least virtio-net pci devices which are quite the norm in cloud environment with QEMU/KVM netdev_add bridge,id=wan2,br=br-wan,helper=/home/yousong/.usr/libexec/qemu-bridge-helper device_add virtio-net-pci,id=devwan2,netdev=wan2,mac=11:22:33:22:11:00 The config was formed by selecting target x86/64 first, then select CONFIG_HOTPLUG_PCI and CONFIG_HOTPLUG_PCI_ACPI with make kernel_menuconfig CONFIG_TARGET=subtarget The following text tries to explain how the current config was formed 1. CONFIG_PCI_LABEL and CONFIG_ATA_PIIX were removed because they were already enabled in x86 platform config 2. CONFIG_ATA_SFF was removed because it was enabled in generic config 3. CONFIG_NLS was removed because it will be selected by CONFIG_PCI_LABEL Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ubus: update to the latest version, adds a race fix for wait_forFelix Fietkau2016-10-121-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools: add missing dependency for dosfstoolsFelix Fietkau2016-10-121-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dosfstools: fix autotools dependencyÁlvaro Fernández Rojas2016-10-121-0/+2
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* tools: improve and simplify dosfstoolsÁlvaro Fernández Rojas2016-10-122-11/+27
| | | | | | | | | - use default host install and clean. - backport compatibility patch for OS X and LEDE (avoids having to force iconv for OS X). - use default HOST_BUILD_DIR. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* tools: remove old mkdosfs symlink from dosfstoolsÁlvaro Fernández Rojas2016-10-125-5/+4
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* uqmi: re-enable autoconnect which was dropped without explanationFelix Fietkau2016-10-121-14/+24
| | | | | | | Fixes a regression in commit 8f24ee638275: "uqmi: Add proper IPv6 support" Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uqmi: always use DHCP for IPv4Felix Fietkau2016-10-121-54/+30
| | | | | | | | | | | Commit 8f24ee638275 ("uqmi: Add proper IPv6 support") changed the code to fetch the IPv4 address via QMI by default instead of using DHCP to make it consistent with the IPv6 codepath. This breaks on at least some Sierra Wireless cards, where data exchanges fail to work until the host has fetched a DHCP lease. Leave v6 as it is, but always use DHCP for v4. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: add userspace support for D-Link DIR-869 A1, generate imagesFlorian Beier2016-10-116-1/+25
| | | | | | Signed-off-by: Florian Beier <beier.florian@gmail.com> [Matthias Schiffer: fix factory image, improve commit message] Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: add kernel support for D-Link DIR-869 A1Matthias Schiffer2016-10-117-0/+193
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: add back SEAMA header checksum fix (as used on ramips)Matthias Schiffer2016-10-111-0/+17
| | | | | | | | The D-Link DIR-869 A1 doesn't accept images with the jffs2 marker added after the checksummed range, so we need to include it in the checksum and fix it on first boot. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: avoid double lzma compression of kernel for SEAMA imagesMatthias Schiffer2016-10-111-1/+1
| | | | | | | | Use relocation loader instead of lzma loader. Tested on D-Link DIR-869 A1. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: add relocation loaderMatthias Schiffer2016-10-112-0/+15
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: clean up SEAMA image build codeMatthias Schiffer2016-10-111-34/+18
| | | | | | | | | | | Split seama-factory and seama-sysupgrade into smaller pieces (similar to the ramips code) to make the image generation more flexible. Also use standard pad-offset instead of adding a block of zeros at the beginning of the image that is later cut off again. Standard pad-rootfs can be used as the seal header doesn't contain an image size or checksum. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* include: prereq-build.mk: improve gcp checkJo-Philipp Wich2016-10-111-2/+2
| | | | | | | | | Adjust the check for gcp (GNU copy command) to rule out false positives with "Goffi's CoPier" a python copy command. Fixes FS#218. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* lantiq: fix lantiq-dsl output spamMathias Kresin2016-10-111-1/+1
| | | | | | | | | | | | | | | | | In case the adsl/vdsl service is disabled intentional, the output is cluttered with the following message multiple times if the status of the dsl line is queried: killall: vdsl_cpe_control: no process killed If the dsl line status is queried by LuCI, the logfile is spammed with the message. Fix the issue by using killall in quite mode. In quite mode killall still returns a non-zero value if the to be killed process can not be found so that existing logic based on the return value still works. Signed-off-by: Mathias Kresin <dev@kresin.me>
* netfilter: remove nf_tproxy_core referencesMathias Kresin2016-10-111-2/+1
| | | | | | | | | | nf_tproxy_core was removed during 3.12 development with kernel commit fd158d79d33d3c8b693e3e2d8c0e3068d529c2dc. The code was moved to xt_TPROXY.c. Fixes FS#212 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ar71xx: build image for Archer C7 v2 ILAmir Rachum2016-10-091-1/+11
| | | | | | | TP-Link uses a different region coding mechanism for IL firmware for the Archer C7 v2. Instead of of setting the region, they set a different TPLINK_HWREV. Signed-off-by: Amir Rachum <amir@rachum.com>
* uhttpd: update to the latest version, adds a small json handler fixFelix Fietkau2016-10-081-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: update rtl8xxxu patchesÁlvaro Fernández Rojas2016-10-0863-98/+616
| | | | | | | Adds the latest patches from Jes Sorensen for rtl8xxxu, which improve rtl8732bu, rtl8192eu and rtl8188eu support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: update kernel 4.4 to version 4.4.24Álvaro Fernández Rojas2016-10-081-2/+2
| | | | | | | Refresh patches for all targets that support kernel 4.4. compile/run-tested on brcm2708/bcm2710 only. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* lantiq: fix BTHOMEHUBV2B default packagesMathias Kresin2016-10-061-1/+1
| | | | | | | | | | Due to the introduced double whitespace the default package selection isn't applied. This leads to errors like a not working networking because of a missing swconfig binary. Fixes FS#208. Signed-off-by: Mathias Kresin <dev@kresin.me>
* scripts/diffconfig.sh: fix output if TARGET_PER_DEVICE_ROOTFS is setMathias Kresin2016-10-061-0/+1
| | | | | | | diffconfig show packages selected as dependencies of TARGET_PER_DEVICE_ROOTFS as individual selected. Signed-off-by: Mathias Kresin <dev@kresin.me>
* tools: do not apply ccache dependency to xzJo-Philipp Wich2016-10-061-1/+1
| | | | | | | Since XZ is needed to bootstrap building ccache we must not depend on it, so remove the dependency on ccache to avoid circular dependencies. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* tools: xz: force building without ccacheJo-Philipp Wich2016-10-061-0/+3
| | | | | | | Since XZ is required to bootstrap ccache we must not use the ccache compiler wrapper to avoid circular dependencies. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* tools: make all tools depend on xzJo-Philipp Wich2016-10-061-0/+3
| | | | | | | Make all tools except tar (which is required to bootstrap xz-utils) and XZ itself depend on XZ, in order to be able to handle .tar.xz downloads. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* tools: tar: use .bz2 archiveJo-Philipp Wich2016-10-061-2/+2
| | | | | | | The "tar" utility is required to bootstrap XZ which is required to handle .tar.xz archives, therfore revert to using the bz2 archive. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* tools: xz: use .bz2 archiveJo-Philipp Wich2016-10-062-13/+10
| | | | | | | | | | In order to build XZ itself we cannot assume that XZ support is available, so fetch the bz2 archive variant of its sources instead. Also drop the FreeBSD portability patch and apply it at prepare time using sed, to avoid a dependency on GNU patch which in turn depends on XZ support. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* source: Switch to xz for packages and tools where possibleDaniel Engberg2016-10-0649-71/+96
| | | | | | | | | | | * Change git packages to xz * Update mirror checksums in packages where they are used * Change a few source tarballs to xz if available upstream * Remove unused lines in packages we're touching, requested by jow- and blogic * We're relying more on xz-utils so add official mirror as primary source, master site as secondary. * Add SHA256 checksums to multiple git tarball packages Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* dslite: Quote resolveip hostname argumentHans Dedecker2016-10-062-4/+8
| | | | | | | | | Quote resolveip hostname argument to avoid bad shell injections. While at it fix pattern match logic in case multiple IPv6 addresses are returned for a hostname as they're seperated by newline by resolveip and not a white space Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* include: remove XZ host prereqJo-Philipp Wich2016-10-061-3/+0
| | | | | | | We build XZ as part of tools/, so no need to require it to be available on the host system. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* at91: Remove u-boot from platform images folderBen Whitten2016-10-067-836/+0
| | | | | | | Removes the bootloader from the images section as its now in packages/boot with the others. Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
* package: Add U-Boot for at91Ben Whitten2016-10-061-0/+102
| | | | | | | Adds u-boot for the at91 platform and a couple of boards. The build honours COPTS to benefit from fortify source et al. Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
* uhttpd: rename certificate defaults sectionJo-Philipp Wich2016-10-061-2/+2
| | | | | | | Now that the uhttpd init script can generate certificates using openssl as well, update the section name and related comment to be more generic. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ipq806x: fix wlan mac for Netgear R7800Pavel Kubelun2016-10-061-0/+3
| | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* include/package-ipkg.mk: use TARGET_PATH_PKG in Package/*/install stepsMatthias Schiffer2016-10-061-0/+2
| | | | | | | Package/*/install was using a different PATH than all other steps like Build/Install, which was confusing and easily led to mistakes. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* include/host-build.mk: set Host/Exports for Host/Install stepMatthias Schiffer2016-10-061-0/+1
| | | | | | | | | Having a different PATH in Host/Install than in other steps like Host/Build is confusing and easily leads to mistakes. Setting all of Host/Exports makes host builds match target builds (Build/Install is part of $(STAMP_BUILT), which has Build/Exports set). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* include/host-build.mk: fix ACLOCAL_INCLUDEMatthias Schiffer2016-10-061-1/+1
| | | | | | | | It seems the intention was to add both $(STAGING_DIR_HOST)/... and $(STAGING_DIR)/host/... instead of passing $(STAGING_DIR_HOST) twice. This makes the definition match HOST_CPPFLAGS and HOST_LDFLAGS. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* include/host-build.mk: pass HOST_BUILD_PREFIX to Host/installMatthias Schiffer2016-10-061-2/+2
| | | | | | | | | | Using HOST_BUILD_PREFIX instead of STAGING_DIR_HOST will make the argument work as expected from packages. Nothing changes for tools, for which HOST_BUILD_PREFIX and STAGING_DIR_HOST are equivalent. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* hostapd: make -mesh and -p2p variants depend on the cfg80211 symbolFelix Fietkau2016-10-051-3/+3
| | | | | | Avoids build failures when the nl80211 driver is disabled Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: fixup last commitsMathias Kresin2016-10-055-9/+9
| | | | | | | Revert the rename of unrelated device tree nodes. Rename the missed leds of the Speedport W 504V Typ A. Signed-off-by: Mathias Kresin <dev@kresin.me>
* base-files: also generate configs when current is empty (FS#193)Koen Vandeputte2016-10-052-6/+6
| | | | | | | | | | | | | | | Before a configuration is generated, an empty file is created to store it in. (required by UCI) If something happens during config generation (power cut, interruption, ..) an empty file exists and it is never regenerated again, causing some daemons to fail starting (NTPD, logread, ..) Fix this by also generating new configs if a critical file is empty. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* lantiq: fix usb leds/triggerMathias Kresin2016-10-054-8/+11
| | | | | | | | | | | Add USB led aliases to boards having an led which is meant to be used as USB led according to the manuals. Remove the kmod-ledtrig-usbdev from the default package selection for boards not having an USB led. Add the kmod-ledtrig-usbdev to boards where it is missing. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: use aliases device tree node for ledsMathias Kresin2016-10-0536-285/+277
| | | | | | The chosen node is clearly the wrong place for aliases. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: cleanup led handling functionsMathias Kresin2016-10-053-19/+22
| | | | | | | | | Use a more generic name for the lantiq_get_dt_led_chosen function. Drop the lantiq_is_dt_led_chosen function. The lantiq_get_dt_led function can be used to achieve the same. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: board.d: apply alphabetical order to led fileMathias Kresin2016-10-051-12/+12
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* include/download.mk: Use -7e compression instead of -6 by defaultDaniel Engberg2016-10-051-1/+1
| | | | | | Adds a slightly higher compression level to xz by default which roughly raises memory usage from 100MiB to about 200MiB during compression, about 10MiB for decompression. (Source: xz manpage) Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* include/prereq-build.mk: Add xz-utils to make prereqDaniel Engberg2016-10-051-0/+3
| | | | | | Add xz-utils to make prereq Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 10:33:38 +0000