aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: gracefully handle preexisting VIFJo-Philipp Wich2017-05-141-0/+6
| | | | | | | | | | | | | | | | | | | | Gracefully handle cases where the to-be-created wireless interface already exists on the system which might commonly happen with non-multi-SSID capable wireless drivers. This fixes commit 8301e613655c2d95fa5430a1a57d92d966fdc70b which caused previously ignored "Too many open files in system (-23)" errors to fail the wireless setup procedure. With the updated approach we'll still try recreating the vif after one second if the first attempt to do so failed with ENFILE but we will now consider the operation successfull if a second attempt still yields ENFILE with the requested ifname already existing on the system. Fixes FS#664, FS#704. Suggested-by: Vittorio Gambaletta <openwrt@vittgam.net> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* imagebuilder: fix bundling of DTS sourcesJo-Philipp Wich2017-05-141-3/+3
| | | | | | | | | | | | | | | Refer to LINUX_KARCH instead of ARCH when bundling DTS files in the image builder tarball. While we're at it, also dereference symbolic links when copying as some kernel architectures contain symbolic links in their DTS directories. This fixes aarch64 imagebuilders such as brcm2708/bcm2710 ones in particular as the kernel refers to "aarch64" as "arm64" internally. Ref: https://forum.lede-project.org/t/lede-image-builder-problem/3680 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* generic: refresh patchesLuka Perkov2017-05-141-6/+1
| | | | Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
* mvebu: ClearFog Base fix phy initMarko Ratkaj2017-05-141-0/+61
| | | | | | | Fix Marvell PHYs initialization issues and optimize logic for page changing during init Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
* mvebu: add ClearFog Base supportMarko Ratkaj2017-05-146-1/+37
| | | | | | | | | | Add support for SolidRun ClearFog Base board. The base model is a smaller version of ClearFog Pro without the DSA switch, replacing it with a second copper gigabit port, and only one PCIe socket. Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
* mvebu: add ClearFog Base device tree filesMarko Ratkaj2017-05-142-0/+725
| | | | | | | | | | | | Add device tree files for Solidrun ClearFog Base board. We also need to backport some improvements for Armada 388 MicroSoM. The base model is a smaller version of ClearFog Pro without the DSA switch, replacing it with a second copper gigabit port, and only one PCIe socket. Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
* mvebu: ClearFog renamed upstream to ClearFog ProMarko Ratkaj2017-05-146-12/+12
| | | | | | The conventional model is now known as the "Clearfog Pro" Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
* mvebu: ClearFog DT file renamed upstreamMarko Ratkaj2017-05-141-0/+80
| | | | | | | The conventional model is now known as the "Clearfog Pro". We keep the old armada-388-clearfog.dts file for compatibility reasons. Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
* mac80211, hostapd: always explicitly set beacon intervalMatthias Schiffer2017-05-134-9/+10
| | | | | | | | | | | | | | | | One of the latest mac80211 updates added sanity checks, requiring the beacon intervals of all VIFs of the same radio to match. This often broke AP+11s setups, as these modes use different default intervals, at least in some configurations (observed on ath9k). Instead of relying on driver or hostapd defaults, change the scripts to always explicitly set the beacon interval, defaulting to 100. This also applies the beacon interval to 11s interfaces, which had been forgotten before. VIF-specific beacon_int setting is removed from hostapd.sh. Fixes FS#619. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* hostapd: remove unused variable declarations in hostapd.shMatthias Schiffer2017-05-131-1/+0
| | | | | | | None of the variables in this "local" declaration are actually set in wpa_supplicant_add_network(). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* dnsmasq: bump to 2.77rc3Kevin Darbyshire-Bryant2017-05-122-10/+10
| | | | | | Fix [FS#766] Intermittent SIGSEGV crash of dnsmasq-full Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* ar71xx: enable nand-utils in the mikrotik subtarget to ensure it makes it to ↵Felix Fietkau2017-05-122-2/+4
| | | | | | | | initramfs Without it, sysupgrade from initramfs to nand fails Signed-off-by: Felix Fietkau <nbd@nbd.name>
* openvpn: update to v2.4.2Jo-Philipp Wich2017-05-121-2/+2
| | | | | | | | | | | | | Update to version 2.4.2 in order to address two potential Denial-of-Service vectors in OpenVPN. CVE-2017-7478 - Don't assert out on receiving too-large control packets CVE-2017-7479 - Drop packets instead of assert out if packet id rolls over Ref: https://community.openvpn.net/openvpn/wiki/ChangesInOpenvpn24#OpenVPN2.4.2 Ref: https://community.openvpn.net/openvpn/wiki/QuarkslabAndCryptographyEngineerAudits Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* scripts: Probe external toolchains for libthread-dbFlorian Fainelli2017-05-111-0/+1
| | | | | | | libthread-db is a package that can be configured for external toolchains, so let's have the script probe for it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* scripts: Probe external toolchains for libgompFlorian Fainelli2017-05-111-1/+2
| | | | | | | Now that libgomp can be a package, probe external toolchains for that library. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* toolchain: Package libgompFlorian Fainelli2017-05-111-0/+35
| | | | | | | Some external toolchains may be configured to enable OpenMP. Provide a package for these libraries which can be used by other packages. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* fritz-tools: Find zlib.h header fileFlorian Fainelli2017-05-111-0/+3
| | | | | | | | Add the necessary changes to CMakeLists.txt to search zlib.h. Fixes build issues with external toolchains that don't have STAGING_DIR in the default search path. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* bcm53xx: backport MDIO bus clock initialization fixRafał Miłecki2017-05-112-0/+96
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: backport USB 3.0 PHY patch cleaning all writesRafał Miłecki2017-05-113-0/+354
| | | | | | It doesn't change any bevahior just cleanes up the code. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* fritz_tffs_read: fix parsing of size argumentValentin Spreckels2017-05-111-1/+1
| | | | | | The parameter specification missed that -s takes an argument. Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.DE>
* perf: Disable perf for ARC770 only, enable for ARC HS38Alexey Brodkin2017-05-111-1/+1
| | | | | | | | | | | | | | | Toolchain built for ARCv1 (read for ARC700 cores) by default has disabled atomic ops (-mno-atomic). When we build Linux kernel for ARC770 which has LL/SC instructions and thus may handle normally atomic ops we explicitly add "-matomic" in CFLAGS. But since user-space perf utility has no way to extract CPU config options from Kconfig/defconfig it uses compiler default settings. In case of ARCv2 (read ARC HS38) atomics are enabled by default and so perf builds perfectly fine thus reenabling perf for ARC HS38 (actually for non-ARC700 targets). Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
* build: new fixes for symlinked .config handlingSergey Ryazanov2017-05-111-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When running "make {config|defconfig|oldconfig}" with symlinked .config (e.g. to env/.config) it renames symlink to .config.old, creates new .config file, and writes the updated configuration into it. This breaks the desired workflow when changes in the configuration can be checked using "scripts/env diff" and commited using "scripts/env save". Since the env/.config file is not updated. The things become even worse when working with feeds, since feeds script quite often silently invokes "make {oldconfig|defconfig}" and breaks the symlink. Fix this issue by exporting KCONFIG_OVERWRITECONFIG=1, which forces mconf to overwrite the .config content, instead of renaming it and creating a new file. This variable is set only if .config is a symlink, otherwise the variable is not exported and the old behaviour is preserved. This change uses the same behaviour as "make menucofig", which has already been fixed in commit 5bf98b1acc3b6b178f8954c5075a58e1e6a99d6a. Also make a tiny cosmetic update to the "make menuconfig" target code layout to make it look like other config handling targets. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* dnsmasq: don't propagate DUID from one host to anotherArjen de Korte2017-05-111-1/+1
| | | | | | If no DUID is set for a host, it should be empty, not the last one set for a previous host. Signed-off-by: Arjen de Korte <build+lede@de-korte.org>
* ramips: fixup-mac-address: add missing includeJo-Philipp Wich2017-05-111-0/+1
| | | | | | | | | Add missing include of ramips.sh in order to import the missing ramips_board_name() procedure. Fixes FS#774. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: add support for Asus RT-AC51UØrjan Malde2017-05-107-0/+147
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - SoC: MediaTek MT7620A (580 MHz) - RAM: 64 MiB (Winbond W9751G6JB-25) - Flash: 16 MiB (Spansion S25FL128SAIF00) - LAN: x4 100M - WAN: x1 100M - Others: USB 2.0, reset button, wps button and 9 LEDs Issues: - 5 GHz band is not functional (missing driver support) Installation: Asus windows recovery tool: - install the Asus firmware restoration utility - unplug the router, hold the reset button while powering it on - release when the power LED flashes slowly - specify a static IP on your computer: IP address: 192.168.1.75; Subnet mask 255.255.255.0 - Start the Asus firmware restoration utility, specify the sysupgrade image, and press upload TFTP Recovery method: - set computer to a static ip, 192.168.1.75 - connect computer to the LAN 1 port of the router - hold the reset button while powering on the router for a few seconds - send firmware image using a tftp client; i.e from linux: $ tftp tftp> binary tftp> connect 192.168.1.1 tftp> put lede-ramips-mt7620-rt-ac51u-squashfs-sysupgrade.bin tftp> quit Signed-off-by: Ørjan Malde <foxyred333@gmail.com>
* ramips: add new device ZyXEL Keenetic as knAlexey Belyaev2017-05-107-4/+133
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This device exactly same as NBG-419N but with USB port and USB Led. Specification: - SoC: Ralink RT3052 (MIPS24Kc) @384MHz - RAM: 32 MiB - Flash: 8 MiB - WLAN: WiSoC 2T2R/300Mbps (2.4GHz) - LAN: 4x100M - WAN: 1x100M - USB: 1x2.0 Installation via serial console (57600 8N1) from TFTP server - rename the firmware to something shorter, for example "sysupgrade.bin" (max. 32 chars) - copy firmware TFTP server's directory - when you power on device, and see U-Boot log, immediatly push "2" once. - You will see this message: 2: System Load Linux Kernel then write to Flash via TFTP. Warning!! Erase Linux in Flash then burn new one. Are you sure? - Push "y", and enter: device IP, then TFTP server's IP, and then image firmware file name. The firmware will be downloaded within ~30 seconds and flashed to the device (It will take about 2 minutes). Signed-off-by: Alexey Belyaev <spider@spider.vc> [squash commits, compact commit message, fix compatible string, remove superfluous pinmuxes] Signed-off-by: Mathias Kresin <dev@kresin.me>
* dnsmasq: use append_interface_name when using option --interface-nameHans Dedecker2017-05-092-4/+4
| | | | Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dnsmasq: add interface-name uci list.Daniel Danzberger2017-05-092-1/+7
| | | | | | | | | | | | | | | | | | This patch adds the interface-name option for each dhcp config in /etc/config/dhcp. With the interface_name option users can define a DNS name for each dhcp section that will be resolved by dnsmasq with the underlaying interface address. For example: config dhcp 'lan' option interface 'lan' ... list interface_name 'home.lan' ... Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* ramips: use GPIO_ACTIVE macros in UBNT-ERX.dtsSven Roederer2017-05-061-3/+4
| | | | | | | - reorder includes - use GPIO_ACTIVE_LOW macro instead of hardcoded "1" Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
* ramips: strip padding from TP-Link sysupgrade imagesHenryk Heisig2017-05-051-3/+3
| | | | | | This reduce size of sysupgrade firmware. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ramips: add factory firmware for Tp-Link C20i/C50Henryk Heisig2017-05-051-0/+4
| | | | | | TP-Link firmware doesn't accept sysupgrade.bin with metadata. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* brcm63xx: fix invalid Asmax AR 1004g DTS referenceMarcin Jurkowski2017-05-051-1/+1
| | | | | | | Build profile for Asmax AR 1004g refers to an invalid DTS "rg100a". The correct DTS for this device is "ar1004g". Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
* lantiq: fix avm fritz box mac addressesMathias Kresin2017-05-055-9/+17
| | | | | | | | | It has been shown that the Fritz boxes have the correct mac address set in the wireless calibration data/eeeprom. Use this mac address as base for the ethernet and xdsl interface increment/decrement the address to match the values stored in the tffs. Signed-off-by: Mathias Kresin <dev@kresin.me>
* x86: fix lifting kernel CPU requirements and always enable PAEDaniel Golle2017-05-053-10/+243
| | | | | | | | | commit 89878f60f4 x86: lift kernel minimum CPU requirement to Pentium MMX caused kconfig havoc. Fix this and make sure PAE is enabled even on legacy CPUs as the minimum required CPU has been Pentium MMX for a while now and hence PAE is supported even on the x86_legacy target. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: allow val.% targets to bypass the prepare stepsFelix Fietkau2017-05-051-0/+3
| | | | | | | Significantly reduces time spent processing those targets and should also silence some log clutter which could confuse buildbot Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86/legacy: add missing config symbolJo-Philipp Wich2017-05-051-0/+1
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* x86: lift kernel minimum CPU requirement to Pentium MMXDaniel Golle2017-05-053-3/+3
| | | | | | | Anything older than that isn't supported since commit f4f8f4a180366, hence also switch to Pentium MMX when building the kernel. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* x86: generic: use HIGHMEM64G instead of HIGHMEM4GDaniel Golle2017-05-051-1/+2
| | | | | | | | commit 4b4f73937371 switched on HIGHMEM4G which implicitely disabled PAE and hence also NX and other useful and security-relevant features. Re-enable PAE by switching to HIGHMEM64G. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* x86: keep /boot mounted for kexecDaniel Golle2017-05-051-4/+7
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: make tftp root if not existingAlberto Bursi2017-05-041-1/+1
| | | | | | | | | | If there's a TFTP root directory configured, create it with mkdir -p (which does not throw an error if the folder exists already) before starting dnsmasq. This is useful for TFTP roots in /tmp, for example. Originally submitted by nfw user aka Nathaniel Wesley Filardo Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* dnsmasq: fix dhcp_option usage warningHans Dedecker2017-05-041-1/+2
| | | | | | | Don't display unnecessary dhcp_option usage warning in case dhcp_option is empty Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ramips: purge default packages on MT7621Daniel Golle2017-05-049-29/+48
| | | | | | | | | | | | | | In order to have a smaller initramfs image remove all packages not needed on all devices and add them explicitely for those actually needing them. Also remove wpad-mini from ramips default package set and add it to all sub-targets except for MT7621. While at it reorder packages alphabetically and replace kmod-mt76 with kmod-mt7603 and/or kmod-mt76x2 depending on the chip actually used on a specific board. Hopefully fixes FS#758 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: clean up modules definitionsMatthias Schiffer2017-05-043-45/+5
| | | | | | | | | | | | | | | | | | Module definitions for kmod-wdt-sunxi and kmod-eeprom-sunxi are removed (wdt-sunxi was builtin anyways; nvmem-sunxi, which is the new name of eeprom-sunxi is changed to builtin). As kmod-eeprom-sunxi was specified in DEFAULT_PACKAGES, but not available on kernel 4.4, it was breaking the image builder. Support for kmod-sunxi-ir is added for kernel 4.4 (it is unclear why it was disable before, it builds fine with with kernel 4.4). Condtionals only relevant for pre-4.4 kernels are removed from modules.mk, as sunxi does't support older kernels anymore. Fixes FS#755. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ramips: enable ramdisk for mt7621Paul Spooren2017-05-041-1/+1
| | | | | | Fixes #758 Signed-off-by: Paul Spooren <paul@spooren.de>
* octeon: port missing 4.9 patchesFelix Fietkau2017-05-046-0/+1766
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* armvirt: 64: enable usb supportYousong Zhou2017-05-032-1/+1
| | | | | | | | | It was originally only enabled for the "32" subtarget along with the "usb" feature which is now also shared by the "64" target This should fix the phase1 build of armvirt/64 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ipq806x: fix EA8500 switch configurationJo-Philipp Wich2017-05-031-1/+1
| | | | | | | | | Do not assign the CPU port twice, this confuses LuCI and possible other programs relying on topology information in board.json. Ref: https://github.com/openwrt/luci/issues/1086 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* hostapd: add legacy_rates option to disable 802.11b data rates.Nick Lowe2017-05-031-8/+20
| | | | | | | | | | | | | | | | | | Setting legacy_rates to 0 disables 802.11b data rates. Setting legacy_rates to 1 enables 802.11b data rates. (Default) The basic_rate option and supported_rates option are filtered based on this. The rationale for the change, stronger now than in 2014, can be found in: https://mentor.ieee.org/802.11/dcn/14/11-14-0099-00-000m-renewing-2-4ghz-band.pptx The balance of equities between compatibility with b clients and the detriment to the 2.4 GHz ecosystem as a whole strongly favors disabling b rates by default. Signed-off-by: Nick Lowe <nick.lowe@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup, defaults change]
* hostapd: fix reload frequency change patchAbhilash Tuse2017-05-032-7/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When sta is configured, hostapd receives 'stop' and 'update' command from wpa_supplicant. In the update command, hostapd gets sta parameters with which it configures ap. Problem is, with the default wireless configuration: mode:11g freq:2.4GHz channel:1 If sta is connected to 5GHz network, then ap does not work. Ideally with 340-reload_freq_change.patch hostapd should reload the frequency changes and start ap in 5GHz, but ap becomes invisible in the network. This issue can be reproduced with following /etc/config/wireless: config wifi-device radio0 option type mac80211 option channel 1 option hwmode 11g option path 'virtual/uccp420/uccwlan' option htmode 'none' config wifi-iface 'ap' option device 'radio0' option encryption 'none' option mode 'ap' option network 'ap' option ssid 'MyTestNet' option encryption none config wifi-iface 'sta' option device radio0 option network sta option mode sta option ssid TestNet-5G option encryption psk2 option key 12345 This change updates current_mode structure based on configured hw_mode received from wpa_supplicant. Also prepare rates table after frequency selection. Signed-off-by: Abhilash Tuse <Abhilash.Tuse@imgtec.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup, patch refresh]
* base-files: implement ucidef_set_hostname(), ucidef_set_ntpserver()Jo-Philipp Wich2017-05-031-0/+20
| | | | | | | | | | | | | | Commit 2036ae4 (base-files: support hostname and ntp servers through board.d) was supposed to implement these procedures but lacked the required changes to uci-defaults.sh. Add the missing procedures now to fix config generation on targets relying on hostname or NTP server presetting. Fixes FS#754. Reported-by: Cristian Morales Vega <cristian@samknows.com> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 18:44:28 +0000