aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mt76: remove specific firmware versions from makefileFelix Fietkau2015-04-211-3/+5
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45549
* kernel: backport an upstream PPPoE shutdown fixFelix Fietkau2015-04-211-0/+89
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45548
* bcm53xx: sysupgrade: check if new kernel fits partition sizeRafał Miłecki2015-04-211-2/+7
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45547
* bcm53xx: sysupgrade: improve NAND warningsRafał Miłecki2015-04-211-2/+5
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45546
* bcm53xx: image: prepare for generating serial flash imagesRafał Miłecki2015-04-211-0/+7
| | | | | | | | | There are some rare devices without NAND, like Netgear EX6200 or TP-LINK Archer C8. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45545
* bcm53xx: sysupgrade: drop some debugging messageRafał Miłecki2015-04-211-1/+0
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45544
* bcm53xx: sysupgrade: allow flashing NAND devices without --forceRafał Miłecki2015-04-211-5/+0
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45543
* bcm53xx: sysupgrade: support flashing TRX with UBI imageRafał Miłecki2015-04-211-3/+9
| | | | | | Signed-off-by: Dan Haab <dhaab@luxul.com> SVN-Revision: 45542
* bcm53xx: append only 1 block (with erasing mark) to UBIRafał Miłecki2015-04-211-2/+8
| | | | | | | | | | This is needed as prepare_generic_squashfs generates more data (in our case 0x40004 B) and it's complex for sysupgrade to extract UBI image out of TRX. Signed-off-by: Dan Haab <dhaab@luxul.com> SVN-Revision: 45541
* bcm53xx: always use 4 MiB for TRX kernel partition to simplify upgradesRafał Miłecki2015-04-211-3/+5
| | | | | | Signed-off-by: Dan Haab <dhaab@luxul.com> SVN-Revision: 45540
* odhcpd: minor fixesSteven Barth2015-04-211-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45539
* ar71xx: add TP-LINK TL-WR710N v2John Crispin2015-04-211-1/+3
| | | | | | | | TP-Link TL-WR710n v2 looks like v1, but has less memory (4MB). Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 45538
* ipq806x: add db149 support to OpenWrt init scriptsJohn Crispin2015-04-213-0/+10
| | | | | | | | | | DB149 is a IPQ8064 based platform. This patch adds the init scripts to detect it, configure the network accordingly, and generate a flashable image for it. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45537
* ipq806x: add db149 dts filesJohn Crispin2015-04-212-0/+586
| | | | | | | | | DB149 is an IPQ806x based development platform. This patch adds the dts files to support it. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45536
* ipq806x: enable AT803x driverJohn Crispin2015-04-212-0/+2
| | | | | | | | | Certain IPQ806x based platforms are making use of this PHY. So we'll enable it so it gets detected as such. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45535
* kernel: remove module checks for 3.15/3.16/3.17John Crispin2015-04-214-30/+11
| | | | | | Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 45534
* kernel: remove usb-serial-motorola-phoneJohn Crispin2015-04-211-15/+0
| | | | | | | | replaced by usb-serial-simple (see r45233) Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 45533
* wpan: remove duplicate DEPENDSJohn Crispin2015-04-211-2/+1
| | | | | | Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 45532
* kernel: add bluetooth symbols from Kernel 4.0John Crispin2015-04-211-0/+2
| | | | | | | | | upstream commit: Bluetooth: Introduce BT_BREDR and BT_LE config options id: 65efd2bf4885312b42de9829159789199221cc60 Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 45531
* kernel: fix generic/3.18 wpan symbolsJohn Crispin2015-04-211-1/+1
| | | | | | | | | -removed symbol because it should be handled by wpan.mk -add missing FAKEHARD symbol (this symbol is removed in Kernel 4.0) Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 45530
* wpan: rework bluetooth / wpan and 6lowpan dependenciesJohn Crispin2015-04-212-20/+18
| | | | | | | | | | - remove/rename of 6lowpan-iphc upstream change in 3.17: 6lowpan: introduce new net/6lowpan directory id: 2c6bed7cfcd3f594ed9e4d6919fa2ebea2243d19 Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 45529
* ar71xx: refresh patchesLuka Perkov2015-04-207-15/+15
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45528
* ar71xx: add support for compex wpj344Luka Perkov2015-04-209-7/+224
| | | | | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de> Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45527
* nettle: bump to 3.1Steven Barth2015-04-206-3581/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45526
* binutils/oprofile: disable mips16 to fix build errors (#19522)Felix Fietkau2015-04-202-0/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45525
* ar71xx: Increase RXD/RDV to 2 on OM5P-ANFelix Fietkau2015-04-201-3/+2
| | | | | | | | | | It was reported that OM5P-AN needs not only a delay setting of 1 for RXD/RDV but 2. These was found when testing with a NetGear GS752TP POE switch with a cable length of 50ft and 250ft. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 45524
* ar71xx: add a helper function to set RXDV/RXD of ETH_CFG on AR934xFelix Fietkau2015-04-202-0/+27
| | | | | | | | | | | | | | | The ETH_RXDV_DELAY (17:16) and ETH_RXD_DELAY (15:14) are currently not cleared by the function ath79_setup_ar934x_eth_cfg. Clearing these in the ath79_setup_ar934x_eth_cfg may cause problems on some hardware because they rely on the preset value by the bootloader. Instead another function is introduced which also works on ETH_CFG on AR934x. It can be used to safely clear and set ETH_RXDV_DELAY and ETH_RXD_DELAY on machines which require special settings. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 45523
* ar71xx: add mask and shift for RXD/RDV bits in AR934X register fileFelix Fietkau2015-04-201-1/+5
| | | | | | | | | | | | | The commit r38948 ("ag71xx: add F1E specific feature bit definitions to AR934X register file") introduced definitions for some bits in the RDV/RXD part of the ETH_CFG register of AR934x. These are incomplete because ETH_RXDV_DELAY is specified as 17:16 and ETH_RXD_DELAY is specified 15:14. The original commit only specified the lower bits. The upper bits also have to be unset when the lower bits should only be set. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 45522
* ar71xx: Remove TX/RX delay from pll_1000 for OM5P-ANFelix Fietkau2015-04-201-1/+1
| | | | | | | | | | The tx/rx delay bits in the ETH_XMII_CONTROL register have to be unset when the enable_rgmii_rx_delay/enable_rgmii_tx_delay will be set in the AT803x PHY. Othwise the throughput in gigabit mode is heavily reduced. Signed-off-by: Sven Eckelmann <sven@open-mesh.org> SVN-Revision: 45521
* mac80211: fallback to wpa_supplicant to setup encrypted meshFelix Fietkau2015-04-201-4/+3
| | | | | | | | | | instead of failing when authsae is not installed, also try using wpa_supplicant as the newly added -mesh variants support mesh mode and SAE encryption. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 45520
* hostapd/netifd: encrypted mesh with wpa_supplicantFelix Fietkau2015-04-201-18/+29
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 45519
* tools: drop unused genext2fsJo-Philipp Wich2015-04-205-687/+0
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 45518
* all: replace genext2fs with make_ext4fsJo-Philipp Wich2015-04-204-12/+46
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 45517
* netfilter.mk: remove obsolete ip_nat_ftp related lineFelix Fietkau2015-04-201-1/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45516
* netfilter.mk: move IRC conntrack/nat helpers to kmod-nf-nathelper-extraFelix Fietkau2015-04-201-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45515
* odhcp6c: fix SOL_MAX_RT to match RFC 3315Steven Barth2015-04-201-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45514
* nftables: bump versionSteven Barth2015-04-201-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45513
* iproute2: update to v4.0.0Steven Barth2015-04-205-25/+9
| | | | | | | | | | | | The most significant change from the previous version is the trimming of the 300-ip_tiny.patch to lib/utils.c where a section previously patched had vanished. That section of the patch was removed. Built and lightly tested on ar71xx against uClibc and musl. Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 45512
* Revert "ar71xx/image: move TPLINK-LZMA image to new build code" (r45490)Felix Fietkau2015-04-191-325/+45
| | | | | | | | | Profile definitions need to be checked and fixed before this patch can be applied again. Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45511
* libnl-tiny: link library with -Bsymbolic-functionsFelix Fietkau2015-04-191-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45510
* lua: link library with -Bsymbolic-functionsFelix Fietkau2015-04-191-0/+11
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45509
* cmake.mk: enable -Bsymbolic-functions by default for linking shared libs, ↵Felix Fietkau2015-04-191-2/+3
| | | | | | | | slightly improves performance and compression Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45508
* ramips: switch WSR-1166 and WSR-600 to single-firmware mtd layoutFelix Fietkau2015-04-192-22/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45507
* kernel: refresh generic patchesJonas Gorski2015-04-1933-60/+60
| | | | | | | | | Refresh patches to remove the trailing whitespaces caused by an old diffutils version on osx. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45506
* brcm63xx: fix bcm63268 rgmii port rgmii configurationJonas Gorski2015-04-191-0/+13
| | | | | | | | | | | This should rather be done by passing appropriate platform_data/OF, but should suffice for now. Fixes e.g. GbE ports on BCM963268BU_P300. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45505
* brcm63xx: allow using all four rgmii ports on bcm6316xJonas Gorski2015-04-192-9/+5
| | | | | | | | | At least the third rgmii port is available on 63169, so assume all are available. Simplifies cpu vs. variant handling. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45504
* netifd: update to the latest version, fixes more interface device config ↵Felix Fietkau2015-04-191-2/+2
| | | | | | | | handling issues Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45503
* brcm63xx: BCM963268BU_P300 reference board fixesJonas Gorski2015-04-184-4/+4
| | | | | | | | | | | - Fix profile name. - Rremove whitespace on board patch. - Refresh patches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45499
* image.mk: do not emit multiple target definitions for kernel imagesFelix Fietkau2015-04-181-1/+4
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45498
* netifd: update to the latest version, fixes more device config handling issuesFelix Fietkau2015-04-181-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45497
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 08:07:45 +0000