aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* target/archs38: switch to 4.9 kernelAlexey Brodkin2017-05-023-18/+39
| | | | | | | | With update of ARC tools to arc-2016.09 based on GCC v6.x we have to bump Linux kernel version so both toolchain and the kernel use the same ARC ABIv4. Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
* toolchain/arc: update to the most recent release arc-2016.09Alexey Brodkin2017-05-0241-523/+573
| | | | | | | | | | | | | | | | | | arc-2016.09 is the most recent toolchain for ARC cores and it is based on top of upstream Binutils 2.27 and GCC 6.2.1. With updated major version of GCC we copied all GCC 6.x patches for ARC as well as Bintils 2.27 patches. Note that toochain sports ARCv4 ABI and so must be used with 4.8+ Linux kernels. Even though it will build v4.4 kernel perfectly fine on attempt to run user-space apps they won't work with older kernel. That said previuosly sent RFC patches with Linux kernel update are required: [1] https://patchwork.ozlabs.org/patch/726686/ [2] https://patchwork.ozlabs.org/patch/726687/ Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
* linux-4.9: Fix building of DWC3 moduleAlexey Brodkin2017-05-021-0/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DWC3 driver uses of_usb_get_phy_mode() which is implemented in drivers/usb/phy/of.c and in bare minimal configuration it might not be pulled in kernel binary. In case of ARC or ARM this could be easily reproduced with "allnodefconfig" +CONFIG_USB=m +CONFIG_USB_DWC3=m. On building all ends-up with: ---------------------->8------------------ Kernel: arch/arm/boot/Image is ready Kernel: arch/arm/boot/zImage is ready Building modules, stage 2. MODPOST 5 modules ERROR: "of_usb_get_phy_mode" [drivers/usb/dwc3/dwc3.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 ---------------------->8------------------ This was affecting Lede in case of CONFIG_ALL_KMODS=y. The patch is already scheduled for v4.12 and once it is backported to 4.9.y it must be removed from here. Note this patch makes sense not only for ARC instead it fixes a generic issue which may affect more arches and platforms thus putting it in "generic/" folder. Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [patch rename]
* perf: disable build for ARC, it is currently brokenFelix Fietkau2017-05-021-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* target: mpc85xx: make kernel_menuconfigAlexandru Ardelean2017-05-021-14/+33
| | | | | | | It's the best method I know (so far) to refresh the kernel config to a default state. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* target: mpc85xx: tl_wdr4900_v1: drop 'fsl_rstcr_restart' hookAlexandru Ardelean2017-05-021-1/+0
| | | | | | | | | | | | Since commit: http://github.com/torvalds/linux/commit/7120438e5d82f445acbfe131a1b58eab7e83fa33 Seems that fsl_rstcr_restart() has been converted to a reset handler and dropped as hook/callback. Apply the same to the `tl_wdr4900_v1` target. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* target: mpc85xx: refresh kernel patchesAlexandru Ardelean2017-05-023-136/+9
| | | | | | | | | | | | | Re-applied patches: 001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch 100-powerpc-85xx-tl-wdr4900-v1-support.patch Dropped patch: 200-spi-fsl-espi-preallocate-local-buffer.patch now part of kernel upstream hash https://github.com/torvalds/linux/commit/1423877b73ed5f4982eaba8bed359605b9918a2b Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* target: mpc85xx: switch to kernel 4.9Alexandru Ardelean2017-05-025-1/+1
| | | | Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* build: remove absolute path to perl and replace with /usr/bin/env perlBastian Köcher2017-05-024-4/+7
| | | | Signed-off-by: Bastian Köcher <git@kchr.de>
* kernel: allow selecting RTC drivers on targets without explicit RTC supportFelix Fietkau2017-05-022-9/+17
| | | | | | Keep them disabled by default to avoid pulling in extra kernel bloat Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-omap: rename patch to 101-disable-thumb-omap3.patchAlexander Couzens2017-04-301-0/+0
| | | | | | It's disabling thumb for the whole omap3 family. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* uboot-omap: enable thumb for overoAlexander Couzens2017-04-301-0/+18
| | | | | | | | Even it's unknown if it's booting with thumb, because the lack of hardware. Enable it for now, so the build succeed, because without thumb it can not fit into spl. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* mediatek: fix mt7530 mcm resetJohn Crispin2017-04-293-3/+12
| | | | | | | Early SoC versions with an ECO of 1 required the gpio reset. Mass production SoCs no longer need this work around. Signed-off-by: John Crispin <john@phrozen.org>
* odhcpd: update to git HEAD version (FS#656,FS#595)Hans Dedecker2017-04-281-3/+3
| | | | | | | | | | 9268ca6 ndp: don't trigger IPv6 ping when neighbor entry is invalid 2b3355f ndp: fix adding proxy neighbor entries 7dff5b4 ndp: fix wrong interface name in syslog message a54afb5 dhcpv6-ia: Fix segfault when writing DHCPv4 leases in state file c0e9dbf ubus: don't segfault when there're no leases Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dnsmasq: support dhcp_option config as a listHans Dedecker2017-04-271-4/+21
| | | | | | | | | | Configuring dhcp_option as an option does not allow the usage of white spaces in the option value; fix this by supporting dhcp_option as a list config while still supporting the option config to maintain backwards compatibility Signed-off-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* x86: enable 4G high memory support for generic (32bit) subtargetJo-Philipp Wich2017-04-272-4/+8
| | | | | | | | | This is required to fully support a number of 32bit x86 systems equipped with more than one GB ram, e.g. certain Atom CPU machines. Ref: https://forum.lede-project.org/t/17-01-1-x86-doesnt-detect-all-of-the-ram/3295 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: ZTE-Q7: fix switch driver initialization in DTS (FS#716)Jo-Philipp Wich2017-04-271-2/+4
| | | | | | | | | | Add the changes suggested by FS#716 to fix the switch driver initialization on the ZTE Q7. Also remove the `pinctrl-names` field obsoleted by the changes. Reported-by: Harry Lau <harrylwc@gmail.com> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* busybox: nslookup_lede: mimic output format of old Busybox appletJo-Philipp Wich2017-04-272-22/+61
| | | | | | | | | | | | | When invoking "nslookup_lede" with a domain argument and without explicit query type, issue both A and AAAA queries and display the resulting IP addresses in a numbered list style, similar to how the old BusyBox nslookup used to output the records. This is required for compatibility with certain scripts. Ref: https://forum.lede-project.org/t/nslookup-ipv6-in-lede-17-01-1 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* busybox: nslookup_lede: fix compatibility with v1.25Jo-Philipp Wich2017-04-272-6/+7
| | | | | | | | | | | | | | The ":*" optstring syntax was only recently introduced with BusyBox v1.26, older versions need a corresponding hint in the "opt_complementary" variable to denote flag values that should be stored as llist entries. Add the required opt_complementary entry to fix random SIGBUS, SIGILL or SIGSEGV related crashes on BusyBox 1.25.x when attempting to use the "-q" flag of the "nslookup_lede" applet. Ref: https://forum.lede-project.org/t/nslookup-ipv6-in-lede-17-01-1 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: fix syntax error in board.d/01_ledsMathias Kresin2017-04-271-1/+1
| | | | | | | | | | Fixes the following error: syntax error: unexpected newline (expecting ")") Fixes: FS#739 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: ZBT-WE826: include the correct dtsiMathias Kresin2017-04-273-6/+4
| | | | | | | | | Fix a copy/paste error and include the ZBT-WE826 dtsi instead of the ZBT-WG3526 one. Fix the syntax error in the ZBT-WE826 dtsi to prevent an compile error. Signed-off-by: Mathias Kresin <dev@kresin.me>
* dropbear: fix procd interface trigger installHans Dedecker2017-04-261-1/+3
| | | | | | | | Install procd interface triggers only for interfaces which are enabled so dropbear instances running on (an) enabled interface(s) are not restarted due to an interface trigger of an interface which is disabled. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* busybox: Enable sendfile by defaultDaniel Engberg2017-04-261-1/+1
| | | | | | Enable sendfile system call by default. http://lists.busybox.net/pipermail/busybox-cvs/2014-November/034831.html Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* include/packages-defaults.mk: Remove LARGEFILE optionDaniel Engberg2017-04-261-1/+0
| | | | | Remove LARGEFILE option, support was removed back in 2011 (OpenWrt rev 25208). Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* imx6: ventana: add GW553x board identificationTim Harvey2017-04-261-0/+5
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx6: disable MSI interruptsTim Harvey2017-04-262-40/+24
| | | | | | | | | | | | The IMX6 PCIe host controller does not fire legacy interrupts if MSI is enabled. A patch is being worked on to enable MSI at runtime only when it is needed but meanwhile this patch will disable MSI for the imx6 kernel. This fixes the no interrupt issue on cards/drivers that use legacy interrupts such as ath9k. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* imx6: apply upstream mmc fix for DDR50 cards on UHS-I capable boardsTim Harvey2017-04-261-0/+42
| | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git/commit/?h=fixes&id=9f327845358d3dd0d8a5a7a5436b0aa5c432e757 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* build: fix symlinked .config handlingSergey Ryazanov2017-04-261-1/+1
| | | | | | | | | | | | | | | | | | When running "make menuconfig" with symlinked .config (e.g. to env/.config) it renames symlink to .config.old, creates new .config file and writes updated configuration here. This breaks the desired workflow when changes in the configuration could be checked using "scripts/env diff" and commited with "scripts/env save". Since the env/.config file is not updated. Fix this issue by exporting KCONFIG_OVERWRITECONFIG=1, which forces mconf to overwrite the .config content, instead of renaming it and creating a new file. This variable is set only if .config is a symlink, otherwise the variable is not exported and the old behaviour is preserved. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* apm821xx: Merge the Cisco Meraki MX60 & MX60WChris Blake2017-04-261-7/+1
| | | | | | | | | Both of these boards share the same DTS, and hardware. The only difference would be the PCI-E slot, and ath9k card found on the MX60W. Due to the similarities, it would be more efficient to merge these profiles. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* apm821xx: Add default packages to NAND targetChris Blake2017-04-263-8/+9
| | | | | | | | | This moves core router packages to the NAND target, to ensure they are applied to all images. This change is being done due to an issue found when flashing the MX60W image, which came without these when built as a multi image. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* ar71xx: fold 641-MIPS-ath79-fix-AR934x-OTP-offsets.patch into the patch that ↵Felix Fietkau2017-04-2615-131/+91
| | | | | | it fixes Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: Backport AR934x OTP PatchChris Blake2017-04-261-0/+42
| | | | | | | | | Merged upstream in https://patchwork.kernel.org/patch/9572541/, this patch fixes the OTP offset used by the AR934x and AR955X to properly enable reading from the OTP. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* ar71xx: Add OTP support for AR934xChris Blake2017-04-261-0/+66
| | | | | | | | | | The patch 523-MIPS-ath79-OTP-support only supports the OTP offsets for AR933x chips, which has changed on newer platforms such as the AR934x. The follwoing change is to add support for reading the OTP on the AR934x. Tested on an Aerohive AP-121. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* tools: host/include/getline.h: RemoveRosen Penev2017-04-262-73/+1
| | | | | | Seems to be useful only for old and unsupported operating systems. Removed and adjusted the mtd-utils Makefile. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: remove out of tree direct-io disable hackFelix Fietkau2017-04-2611-256/+1
| | | | | | | Direct-IO support has to be enabled for the release build anyway, so this hack is not worth keeping Signed-off-by: Felix Fietkau <nbd@nbd.name>
* utils/mdadm: Update to 4.0Daniel Engberg2017-04-265-31/+53
| | | | | | | | | | | Update mdadm to 4.0 Remove 000-compile.patch as it's fixed upstream Refresh patches Add mdadm.h-Undefine-dprintf-before-redefining.patch Source: http://git.openembedded.org/openembedded-core/tree/meta/recipes-extended/mdadm/files Add RAID 0,1 and 10 as depends to make mdadm usable. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* ramips: use the ZBT-WE826 power LED for status indicationMathias Kresin2017-04-252-2/+1
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add ZBT-WE826 32MB variantMathias Kresin2017-04-259-19/+57
| | | | | | | | The ZBT-WG826 is available with 16 or 32 MByte of flash. Split the device tree source file, rename the currently supported 16 MByte version and add the 32 MByte variant. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: rename Digineo AC1200 Pro to ZBT-WG3526 32MBMathias Kresin2017-04-258-29/+23
| | | | | | | | The Digineo AC1200 Pro is the 32MB flash variant of the ZBT-WG3526 with unpopulated/exposed sdhci slot. Rename to board to the OEM/ODM name and add the sdhci kernel module to use it for multiple clones. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: prepare ZBT-WG3526 for hardware variantsMathias Kresin2017-04-256-11/+14
| | | | | | | | The ZBT-WG3526 is available with 16 or 32 MByte of flash. Rename the current supported 16MByte version to indicate which flash size variant is supported. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add support for ZBT-WE1326Jiawei Wang2017-04-255-0/+120
| | | | | | | | | | | | | | | | | | | Specification: - SoC: MT7621AT, MT7603EN and MT7612EN - Flash: 16 MiB (W25Q128FVSG) - RAM: 512 MiB (EM6GE16EWXD-12H) - Ethernet: 1 x WAN (10/100/1000Mbps) and 4 x LAN (10/100/1000 Mbps) - Others: USB 2.0, micro SD slot, reset button and 8 x LEDs Issues: - Two LEDs for 2.4 GHz and 5 GHz Wi-Fi do not work, can't find GPIOs. - The pwr LED is not GPIO controllable How to install: - The original firmware is OpenWrt, so both LuCI or sysupgrade can be used. - Do not keep settings, for sysupgrade please use the -n option. Signed-off-by: Jiawei Wang <buaawjw@gmail.com>
* ramips: fix ZyXEL Keenetic Omni/Omni II GPIOsAlexey Belyaev2017-04-252-6/+22
| | | | | | | Each GPIO bank has only 24 gpios. Use and enable the correct banks for GPIOs > 24. Signed-off-by: Alexey Belyaev <spider@spider.vc>
* ramips: fix ZyXEL Keenetic Omni switch configAlexey Belyaev2017-04-252-2/+2
| | | | | | | The wan port is connected to switch port 0. Fix the mediatek,portmap as well as the default switch config. Signed-off-by: Alexey Belyaev <spider@spider.vc>
* lantiq: DGN3500: make switch LEDs blink on activityKevin Darbyshire-Bryant2017-04-251-0/+15
| | | | | | | | | | | | | | | | | Make switch port LEDs blink on activity as they do with stock firmware. The u-boot loader sets suitable values in the LED control register that unfortunately get blown away by the linux switch driver init. Restore that value by using driver 'initvals'. 0x0431 is the led control register, the value 0x0960. Each nybble represents each LED's mode (LED3,2,1,0) in this case OFF, 1000LINK+Activity, 100/10LINK+Activity, OFF. Only LED1&2 are physically present. Enabling the blinkenlights exposed the fact that an RRCP packet was being emitted by the switch on all ports every second. Further initvals copied from stock firmware's u-boot driver disabled this 'feature'. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* generic: rtl8366rb: add support for initvals from DTSKevin Darbyshire-Bryant2017-04-251-0/+25
| | | | | | | | | Allow per-device initvals in the DTS file for rlt8366rb switches. Shamelessly copies 30494598f891fc4436a49eca55fc31d03c087841 Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* netifd: return error status in reload_serviceHans Dedecker2017-04-241-1/+4
| | | | | | | | Based on a patch by Alexandru Ardelean. netifd ubus reload call returns the actual reload error status; return error status as well in reload_service Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* netifd: update to git HEAD versionHans Dedecker2017-04-241-3/+3
| | | | | | | | | 11cb9cf ubus: add interface method to trigger renew event 4375d1b system-linux: allow "throw" route type 5fbd904 netifd: propagate error code on netifd_reload() 6e0acec interface-ip: fix device name for IPv6 link-local DNS server Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcpd: update to git HEAD versionHans Dedecker2017-04-241-3/+3
| | | | | | | 570069d ubus: rework dumping IPv6 and IPv4 leases 4e579c4 dhcpv6-ia: simplify logic to write statefile and dhcpv6 logging Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* omap: rework image generation and profilesAlexander Couzens2017-04-246-44/+104
| | | | | | | | | Migrate to new image generation and introduce sdcard generation (based on sunxi). Profile now generated via image/Makefile instead of profiles/ directory. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* package/uboot-omap: add am335x_boneblackAlexander Couzens2017-04-241-1/+6
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 20:21:29 +0000