aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: add missing dependencies to kmod-crypto-acompressHauke Mehrtens2017-12-161-0/+2
| | | | | | | kmod-lib-lzo and kmod-lib-lz4 depend in kernel 4.14 on kmod-crypto-acompress, add this missing dependency. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-rtc-ds1307: add dependency to regmapHauke Mehrtens2017-12-161-1/+1
| | | | | | | In kernel 4.14 kmod-rtc-ds1307 depends on regmap-i2c, add this missing dependency. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-iio-bmp280: allow compile with kernel 4.14Hauke Mehrtens2017-12-161-1/+1
| | | | | | This package also compiles with kernel 4.14. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-zram: deactivate CONFIG_ZRAM_WRITEBACK for kernel 4.14Hauke Mehrtens2017-12-161-0/+1
| | | | | | | This new option was introduced in kernel 4.14 and should be deactivated by default. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* xtables-addons: fix compile with kernel 4.14Hauke Mehrtens2017-12-161-0/+9
| | | | | | This fixes a compile problems seen with kernel 4.14. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-fbcon: deactivate for kernel 4.14Hauke Mehrtens2017-12-161-1/+1
| | | | | | | | CONFIG_FRAMEBUFFER_CONSOLE does not activate new modules any more in kernel 4.14, but CONFIG_FRAMEBUFFER_CONSOLE is now a boolean option which change the kmod-fb package. kmod-fbcon should be split up. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-sound-core: handle moved snd-seq-device.koHauke Mehrtens2017-12-161-1/+2
| | | | | | The snd-seq-device.ko kernel module was moved with kernel 4.13. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-mmc: handle moved mmc_block.koHauke Mehrtens2017-12-161-1/+2
| | | | | | mmc_block.ko was moved with kernel 4.10. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-rxrpc: handle renamed kernel moduleHauke Mehrtens2017-12-161-2/+3
| | | | | | | The kernel module was renamed with kernel 4.11, handle that in the package definition. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: deactivate some new network featuresHauke Mehrtens2017-12-161-2/+6
| | | | | | | | | | | This deactivates the following options which were introduced between kernel 4.9 and 4.14 in some kernel packages: CONFIG_INET_ESP_OFFLOAD CONFIG_INET6_ESP_OFFLOAD CONFIG_LWTUNNEL_BPF CONFIG_NET_9P_XEN Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: unset CONFIG_CIFS_SMB311 in kmod-fs-cifsHauke Mehrtens2017-12-161-1/+2
| | | | | | Do not activate the experimental feature CONFIG_CIFS_SMB311. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-crypto-ecdhHauke Mehrtens2017-12-164-1/+76
| | | | | | | | | | In kernel 4.14 kmod-bluetooth depends on kmod-crypto-ecdh, add kmod-crypto-ecdh to LEDE. Both packages also depend on the kmod-crypto-kpp package. To build this we have to fix the dependency of CRYPTO_ECDH which has a typo. This patch is already accepted upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-crypto-rsaHauke Mehrtens2017-12-161-2/+20
| | | | | | | | In kernel 4.14 kmod-crypto-hw-ccp depends on kmod-crypto-rsa, add it. kmod-crypto-rsa also packages the ASN1 parser and some other code which is currently only used by this module. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-crypto-acompressHauke Mehrtens2017-12-161-1/+13
| | | | | | In kernel 4.14 kmod-crypto-deflate depends on kmod-crypto-acompress. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-lib-zstdHauke Mehrtens2017-12-162-1/+23
| | | | | | | In kernel 4.14 kmod-fs-btrfs depends on the zstd compression libraries, add it to the package system. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-daxHauke Mehrtens2017-12-161-1/+12
| | | | | | | In kernel 4.14 kmod-dm depends on kmod-dax. Add DAX: "Direct access to differentiated memory" to LEDE. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: tg3: deactivate hwmon for kernel 4.14Hauke Mehrtens2017-12-161-2/+3
| | | | | | | In kernel 4.14 hwmon support can be deactivated for the tg3 driver, deactivate it by default to save some space. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: generic: Add kernel 4.14 supportHauke Mehrtens2017-12-16132-8/+25624
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds initial support for kernel 4.14 based on the patches for kernel 4.9. In the configuration I deactivated some of the new possible security features like: CONFIG_REFCOUNT_FULL CONFIG_SLAB_FREELIST_HARDENED CONFIG_SOFTLOCKUP_DETECTOR CONFIG_WARN_ALL_UNSEEDED_RANDOM And these overlay FS options are also deactivated: CONFIG_OVERLAY_FS_INDEX CONFIG_OVERLAY_FS_REDIRECT_DIR I activated this: CONFIG_FORTIFY_SOURCE CONFIG_POSIX_TIMERS CONFIG_SLAB_MERGE_DEFAULT CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED I am not sure if I did the porting correct for the following patches: target/linux/generic/backport-4.14/020-backport_netfilter_rtcache.patch target/linux/generic/hack-4.14/220-gc_sections.patch target/linux/generic/hack-4.14/321-powerpc_crtsavres_prereq.patch target/linux/generic/pending-4.14/305-mips_module_reloc.patch target/linux/generic/pending-4.14/611-netfilter_match_bypass_default_table.patch target/linux/generic/pending-4.14/680-NET-skip-GRO-for-foreign-MAC-addresses.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* x86: refresh configurationHauke Mehrtens2017-12-163-16/+3
| | | | | | | Just refresh the kernel configuration, some options are removed because they are now in the generic kernel configuration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: generic: add some more 4.9 configure optionsHauke Mehrtens2017-12-161-0/+9
| | | | | | | These are taken from the x86 target and should make support kernel 4.9 and 4.14 in the x86 target easier. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* xtables-addons: update to version 2.14Hauke Mehrtens2017-12-161-2/+2
| | | | | | This includes a compile fix needed for kernel 4.14. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* netdevices.mk: add Sun Neptune 10Gbit EthernetLucian Cristian2017-12-161-0/+16
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* kernel: tune e1000e module parametersJo-Philipp Wich2017-12-161-0/+3
| | | | | | | | | | | | | The default e1000e parameters (interrupt throttling rate, MSI/MSI-X mode) are optimized for desktop and server computers to optimize user-space execution (i.e. what's typically referred to as "useful" work). This assumption breaks on a router under load where most of the "useful" work actually takes place either in hardware interrupt handlers (IRQ) or at software IRQ (swirq) modes, so we try to reflect that by overriding these parameters with more appropriate values. Patch-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* x86: add on-chip thermal sensors and cpuid supportPhilip Prindeville2017-12-162-1/+33
| | | | | | | | | | | Cover temperature sensors for all mainstream 64-bit processors, including AMD 10h and 15h families, Intel iCore, Xeon, Atom, and Via Nano. Also add CPUID support for user-space applications to detect CPU type. Include the on-chip sensors for 64-bit CPU's in the generic profile in case someone builds a 32-bit kernel to run on a Xeon SoC, etc. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* x86: refresh settings for 4.9.59Philip Prindeville2017-12-161-7/+1
| | | | Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* tools/expat: Update to 2.2.5Daniel Engberg2017-12-161-2/+2
| | | | | | Update (lib)expat to 2.2.5 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* brcm63xx: backport mdio-bus reset gpio supportJonas Gorski2017-12-1613-96/+416
| | | | | | | Backport the mdio-bus reset gpio support from 4.12 and use it instead of toggling the reset ourself. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: backport enet cleanup patchesJonas Gorski2017-12-1614-36/+415
| | | | | | Align with upstream version, mostly non-fixes and small clean ups. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: register serial through device treeJonas Gorski2017-12-16167-363/+1144
| | | | | | | Register serial consoles through device tree instead of through board data. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: add uart nodesJonas Gorski2017-12-1610-0/+224
| | | | | | | Now that we can register uarts through device-tree, add them to the dtsi files. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: add clkdev lookup supportJonas Gorski2017-12-1617-73/+793
| | | | | | | Add clockdev lookup support for easier providing of clocks for devices. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: Add Sercomm AD1018 supportDaniel Gonzalez Cabanelas2017-12-167-0/+251
| | | | | | | | | | | | | | | | | | | | Add support for the Sercomm AD1018 router This a BCM6328 based board, 128 MB RAM, 128 MiB NAND flash, with an onboard BCM43217 wifi, 4 ethernet ports and 1 USB host port (not soldered). The board also has an FXS chip (Si32177) connected via SPI (SS2#), without support in LEDE. Since NAND flash chips aren't still supported in brcm63xx, the support is for now added to work only with SPI flash chips. Therefore hardware modding, soldering a new SPI flash chip, is required to make the board work with LEDE (tested and working OK). The flash at dts is intentionally left without partitioning to let the user choose a NOR chip of any size (8, 16 or 32 MB). Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com> [jonas.gorski: renamed ad1018 to ad1018-nor to signify the modification] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* at91: create sdcard image for sama5Sandeep Sheriker Mallikarjun2017-12-162-0/+79
| | | | | | | | | create sdcard image using gen_at91_sdcard_img.sh for sama5 platform and sdcard image partition layout is: P0: Boot (fat32) - contains(at91bootstrap,u-boot,zImage & dtb) p1: Rootfs (ext4) Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* ar71xx: fix invalid pointer dereference in rb95x_nand_scan_fixup()Gabor Juhos2017-12-161-0/+4
| | | | | | | | | | | | Since Linux 4.6, mtd->priv no longer points to the NAND specific structure. Under 4.9 it contains NULL, thus using it to access chip->options causes an invalid pointer dereference (FS#1200). Update the code to use the mtd_to_nand() helper under 4.9 to obtain the address of the chip specific data. Fixes: 7bbf4117c6fe ("ar71xx: Add kernel 4.9 support") Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: fix invalid pointer dereference in c60_nand_scan_fixup()Gabor Juhos2017-12-151-0/+4
| | | | | | | | | | | | | | | | Since Linux 4.6, mtd->priv no longer points to the NAND specific structure. Under 4.9 it contains NULL, thus using it to access the fields of the nand_chip structure causes an invalid pointer dereference. Update the code to use the mtd_to_nand() helper under 4.9 to obtain the address of the chip specific data. Compile tested only. Fixes: 7bbf4117c6fe ("ar71xx: Add kernel 4.9 support") Signed-off-by: Gabor Juhos <juhosg@freemail.hu> Tested-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: fix compiler warning in mtdsplit_minor.c under 4.4Gabor Juhos2017-12-151-0/+11
| | | | | | | | | | | | | | | | | | When mtdsplit_minor.c is compiled under Linux 4.4, the compiler drops the following warning: CC drivers/mtd/mtdsplit/mtdsplit_minor.o drivers/mtd/mtdsplit/mtdsplit_minor.c:106:14: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types] .parse_fn = mtdsplit_parse_minor, ^ drivers/mtd/mtdsplit/mtdsplit_minor.c:106:14: note: (near initialization for 'mtdsplit_minor_parser.parse_fn') The second parameter of the parser function must not have a 'const' qualifier in 4.4. The 001-mtdsplit_backport.patch removes the qualifier from other partition parsers. Update it to handle mtdsplit_minor.c as well. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* iproute2: cake: support new operating modesKevin Darbyshire-Bryant2017-12-152-50/+129
| | | | | | | | | | | | | | | | | | | | There has been recent significant activity with the cake qdisc of late Some of that effort is related to upstreaming to kernel & iproute2 mainline but we're not quite there yet. This commit teaches tc how to activate and interprete the latest cake operating modes, namely: ingress mode: Instead of only counting packets that make it past the shaper, include packets we've decided to drop as well, since they did arrive with us on the link and took link capacity. This mode is more suitable for shaping the ingress of a link (e.g. from ISP) rather than the more normal egress. ack-filter/ack-filter-aggressive: Filter excessive TCP ACKS. Useful in highly assymetric links (downstream v upstream capacity) where the majority of upstream link capacity is occupied with ACKS for downstream traffic. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kmod-sched-cake: bump to latest bake of cakeKevin Darbyshire-Bryant2017-12-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There has been recent significant activity with the cake qdisc of late but in the cobalt branch. Some of that effort is related to upstreaming to kernel & iproute2 mainline but we're not quite there yet. Relevant feature changes: ingress mode: Instead of only counting packets that make it past the shaper, include packets we've decided to drop as well, since they did arrive with us on the link and took link capacity. This mode is more suitable for shaping the ingress of a link (e.g. from ISP) rather than the more normal egress. ptm mode: Minor optimisation in packet overhead calculation. dual-src/dsthost/triple-isolate: Optimise only calculating src or dst host hashes only if required. ack-filter/ack-filter-aggressive: Filter excessive TCP ACKS. Useful in highly assymetric links (downstream v upstream capacity) where the majority of upstream link capacity is occupied with ACKS for downstream traffic. A separate iproute2 patch to teach it about Cake's new features will follow. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ar71xx: fix LED name typo for GL-AR300Mkyson Lok2017-12-151-1/+1
| | | | | | It shouldn't use double colon characters. Signed-off-by: kyson Lok <kysonlok@gmail.com>
* netifd: update to latest git HEADHans Dedecker2017-12-151-3/+3
| | | | | | | | 4268193 interface-ip: harden eui64 IPv6 prefix address generation 81ff6d1 interface-ip: fix race condition in IPv6 prefix address generation d3a5df0 handler: replace is_error() helper with NULL check Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uhttpd: fix PKG_CONFIG_DEPENDS (FS#1189)Hans Dedecker2017-12-151-3/+1
| | | | | | | Remove PACKAGE_uhttpd_debug config as this is an unused leftover Add CONFIG_uhttpd_lua to PKG_CONFIG_DEPENDS Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* Revert "ar71xx: TL-WR1043N v4/v5: add orange WAN LED support"John Crispin2017-12-141-19/+3
| | | | | | | | | | This reverts commit 256990cbc0157feb8a9f37efeebf0330ab73727f. this commit caused a compile error "TL_WR1043_V5_GPIO_LED_WANORANGE" is undefined. Signed-off-by: John Crispin <john@phrozen.org>
* opkg: fix PKG_CONFIG_DEPENDS to include version.mk entriesRafał Miłecki2017-12-141-1/+2
| | | | | | | | Including version.mk sets PKG_CONFIG_DEPENDS to config entries used for VERSION_SED command. We should keep these configs to make sure package gets refreshed when needed. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: allow skipping of hash verificationJo-Philipp Wich2017-12-141-1/+1
| | | | | | | | | | | | | | | | | | | | | When calling a download target, hash verification is now completely skipped if we set PKG_HASH=skip. This allows to easily bump package version: $ make package/<mypackage>/download PKG_HASH=skip V=s $ make package/<mypackage>/check FIXUP=1 V=s This will download the new version of the package, and then automatically update PKG_HASH with the hash of the new version. Of course, it is still the responsibility of the packager to ensure that the new tarball is legitimate, because it is downloaded from a possibly untrusted source. Fixes: b30ba14e ("scripts/download.pl: fail loudly if provided hash is unsupported") Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io> Acked-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: TL-WR1043N v4/v5: add orange WAN LED supportTim Thorpe2017-12-141-3/+19
| | | | | | | Add missing definitions for the orange WAN LED on the TL-WR1043N(D) v4 and v5. Minor format correction on a constant for consistency. Signed-off-by: Tim Thorpe <tim@tfthorpe.net>
* ar71xx: generate BR region-code factory image for TP-Link TL-WR940NHenryk Heisig2017-12-141-1/+2
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* firmware-utils: mktplinkfw: add support for BR region codeHenryk Heisig2017-12-141-0/+1
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* busybox: enable find -newer needed for shorewall firewall, no size increase ↵Lucian Cristian2017-12-142-2/+2
| | | | | | on binary Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* firmware-utils: mktplinkfw: fix JFFS2 EOF markersSergey Ryazanov2017-12-141-1/+1
| | | | | | | | | | | | | | | | | | | | | mktplinkfw/mktplinkfw2 utilities put JFFS2 EOF market only at 64KB boundary, this could lead to current device configuration lost during the sysupgrade on a device, which is equpped with flash with the 4KB erase block size (e.g. TP-Link Archer C20). This happens when 64KB and 4KB alignments do not match, so the JFFS2 data is written not exactly at the partition beginnig and startup scripts can not find the JFFS2 during the first boot just after the sysupgrade. Fix this by placing additional JFFS2 EOF marker at a 4KB boundary. Also keep the marker at 64KB intact, so the utilities will produce images suitable for devices with both 4KB and 64KB erase blocks. Fixes: 29a2c2ea80441895a2ffe100d854d2b26d5fa606 (add ability to put jffs2 eof marker into the image) Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* ar71xx: Fix switch port numbering on MIkrotik RB951Ui-2nD and RB493GJoão Chaínho2017-12-141-4/+4
| | | | | | | This patch fixes the switch port numbering on Mikrotik RB951Ui-2nD (hAP). Also fixes the switch port numbering shown on LuCI for Mikrotik RB493G. Signed-off-by: João Chaínho <joaochainho@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 20:43:32 +0000