aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mtd-utils: activate --gc-sectionsHauke Mehrtens2018-04-281-0/+3
| | | | | | | | | | | | | | | This reduces the size of the binary a bit: old: 37556 bin/targets/lantiq/xrx200/packages/nand-utils_2.0.1-1_mips_24kc.ipk 81697 bin/targets/lantiq/xrx200/packages/ubi-utils_2.0.1-1_mips_24kc.ipk new: 27450 bin/targets/lantiq/xrx200/packages/nand-utils_2.0.1-1_mips_24kc.ipk 71796 bin/targets/lantiq/xrx200/packages/ubi-utils_2.0.1-1_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mtd-utils: update to 2.0.2Syrone Wong2018-04-284-62/+47
| | | | | | | | | | | | 010-fix-rpmatch.patch is upstream, removed from our patchset The file structure is changed, modify patch accordingly use CONFIGURE_ARGS to disable tests, xattr and lzo Compile and run tested on mvebu and x86_64 Signed-off-by: Syrone Wong <wong.syrone@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* tools/mtd-utils: update to version 2.0.2Hauke Mehrtens2018-04-2811-303/+101
| | | | | | | | This version now uses autotools to configure the build system. They are also using the newly added zlib package. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* tools/mtd-utils: Mark some lzma functions as staticHauke Mehrtens2018-04-281-37/+37
| | | | | | | | | | | | | | | These functions are not declared in any header file and only used in same compile unit, mark them as static to remove one gcc warning and make it easier for the compiler to optimize them out. This also fixes some style problems to make this patch match the version in the packages folder. This is copied from this commit to the mtd-utils we pack into the image: 56d0dd56e9c6efa79 ("mtd-utils: Mark some lzma functions as static") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* tools/zlib: move zlib build to toolsHauke Mehrtens2018-04-289-20/+76
| | | | | | | | | | | | | This allows us to link the other tools against our libz and we do not need the system zlib any more. Only the static linked library is copied to the staging directory so we have a statically linked library on all systems and not only on Linux. This also adds the new dependencies of the packages which are depending on zlib. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* netifd: update to latest git HEAD (Coverity fixes)Hans Dedecker2018-04-271-3/+3
| | | | | | | 56ceced interface-ip: remove superfluous iface check in interface_ip_set_enabled() 4f4a8c0 system-linux: fix strncpy bounds Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* arm64: enable harden branch predictorMathias Kresin2018-04-276-2/+10
| | | | | | Enable the harden branch predictor for arm64 as it is recommend. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: add missing config symbolsMathias Kresin2018-04-272-6/+4
| | | | | | | | The harden branch predictor was backported for arm64 with 4.9.92-96. Fixes: 9aa196e0f260 ("kernel: bump 4.9 to bump 4.9.96") Signed-off-by: Mathias Kresin <dev@kresin.me>
* build: add support for git submodules with CONFIG_SRC_TREE_OVERRIDEFelix Fietkau2018-04-271-1/+6
| | | | | | | Also work around an issue where git would store the modified workdir in the submodule git config files Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts/feeds: add support for git feeds with submodulesFelix Fietkau2018-04-271-0/+6
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* brcm47xx: remove linux 4.4 supportFelix Fietkau2018-04-2725-2935/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* brcm63xx: remove linux 4.4 supportFelix Fietkau2018-04-27233-29054/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: drop linux 4.4 and 4.9 supportFelix Fietkau2018-04-27179-21831/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* brcm2708: Add support for raspberry pi 3 b+.Christo Nedev2018-04-276-7/+309
| | | | Signed-off-by: Christo Nedev <christo.nedev@me.com>
* kernel: Fix data corruption on some mips devices.Rosen Penev2018-04-271-0/+92
| | | | | | | | | | This is mainly a bug fix for multi-core MIPS systems where L1 caches besides the primary do not get flushed. The most obvious problem is data corruption on SATA and USB devices where read requests are typically larger than the cacheline size. This may also fix ar71xx systems that suffer from similar data corruption but I have not tested if it does. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* iftop: bump to latestKevin Darbyshire-Bryant2018-04-271-3/+3
| | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. Choose first running interface, rather than first "up" interface (Redhat #1403025) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: Ubiquiti Airmax M: add relocate-kernel to invalidate cacheMatthias Schiffer2018-04-261-0/+1
| | | | | | | | | | | | | | Some Ubiquiti U-boot versions, in particular the "U-Boot 1.1.4.2-s956 (Jun 10 2015 - 10:54:50)" found with AirOS 5.6, do not correctly flush the caches for the whole kernel address range after decompressing the kernel image, leading to hard to debug boot failures, depending on kernel version and configuration. As a workaround, prepend the relocate-kernels loader, which will invalidate the caches after moving the kernel to the correct load address. Reported-by: Andreas Ziegler <dev@andreas-ziegler.de> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* scripts: bundle-libraries: fix build on OS X (FS#1493)Jo-Philipp Wich2018-04-261-0/+4
| | | | | | | | This allegedly fixes compilation of the library bundler preload library on Apple OS X. The resulting executables have not been runtime tested due to a lack of suitable test hardware. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* toolchain/binutils: Remove old patchesDaniel Engberg2018-04-262-42/+0
| | | | | | | | Remove patches for arc-2016.09 Commit https://github.com/openwrt/openwrt/commit/8647f4f018e4dee663b65948d75105fae7bb3cdc made these patches obsolete Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* toolchain/binutils: completely remove 2.28 supportHans Dedecker2018-04-261-5/+0
| | | | | | | | Commit 15e963915963cda515311531b182b9e0c52f35a0 removed support for binutils version 2.28 but did not remove it as selectable item from Binutils Version; let's remove this leftover as well. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* kernel: bump 4.14 to 4.14.36Koen Vandeputte2018-04-266-12/+12
| | | | | | | | | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Fixes for CVEs: CVE-2018-1108 CVE-2018-1092 CVE-2018-1094 CVE-2018-1095 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: Stijn Segers <foss@volatilesystems.org>
* kernel: bump 4.9 to 4.9.96Kevin Darbyshire-Bryant2018-04-2646-391/+337
| | | | | | | | | | | | | | | | | | Refresh patches, following required reworking: ar71xx/patches-4.9/930-chipidea-pullup.patch layerscape/patches-4.9/302-dts-support-layercape.patch sunxi/patches-4.9/0052-stmmac-form-4-12.patch Fixes for CVEs: CVE-2018-1108 CVE-2018-1092 Tested on: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: Arjen de Korte <build+openwrt@de-korte.org>
* uboot-envtools: add support for ESPRESSObin and MACCHIATObinDamir Samardzic2018-04-251-0/+4
| | | | | | | | Added for convenience. These boards can be used as dev boards running various operating systems from different media, and this simplifies work with U-Boot environment. Signed-off-by: Damir Samardzic <damir.samardzic@sartura.hr>
* mvebu: cortexa72: enable Marvell 10G PHY by defaultDamir Samardzic2018-04-251-0/+1
| | | | | | This one enables 10 GbE ports on MACCHIATObin. Signed-off-by: Damir Samardzic <damir.samardzic@sartura.hr>
* ramips: fix mt7628 eval board pinmuxMathias Kresin2018-04-251-1/+1
| | | | | | | | | There is no pinmux group "jtag" for mt7628 and the pinmux driver fails to load due to the use of the not existing group. Fixes: FS#1515 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: create image for mt7628 evb boardMathias Kresin2018-04-231-0/+1
| | | | | | | The image for the EVB board got lost with the merge of the mt7628 and mt7688 subtargets. Signed-off-by: Mathias Kresin <dev@kresin.me>
* firmware-utils: tplink-safeloader: increase RE350 kernel sizeAlex Maclean2018-04-231-3/+3
| | | | | | | | 4.14 increased kernel size, so grow the kernel partition by 128K to compensate. Fixes FS#1479. Signed-off-by: Alex Maclean <monkeh@monkeh.net>
* ramips: use patch-dtb for F5D8235 V1Tobias Wolf2018-04-231-3/+1
| | | | | | | | | | The old DTB method (OWRTDTB) is not recognized by the boot process anymore with 4.9/4.14. This patch reuses KERNEL_DTB to get a valid DTB applied to the kernel image. Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
* kernel: fix usb interface on 3G dwm-158 modemGiuseppe Lippolis2018-04-231-0/+42
| | | | | | | | | | | | The current option driver binds to the usb interface 2,3,4,5. But the interface 4 and 5 doesn't answer to the AT commands. On the new openwrt configuration the wwan script select the 5th interface as control interface, failing to establish the 3G connection. Backport the fix for the problem. Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
* ipq40xx: add support for OpenMesh A62Sven Eckelmann2018-04-239-7/+287
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * QCA IPQ4019 * 256 MB of RAM * 32 MB of SPI NOR flash (s25fl256s1) - 2x 15 MB available; but one of the 15 MB regions is the recovery image * 2T2R 2.4 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62 * 2T2R 5 GHz (channel 36-64) - QCA9888 hw2.0 (PCI) - requires special BDF in QCA9888/hw2.0/board-2.bin bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 * 2T2R 5 GHz (channel 100-165) - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62 * multi-color LED (controlled via red/green/blue GPIOs) * 1x button (reset; kmod-input-gpio-keys compatible) * external watchdog - triggered GPIO * 1x USB (xHCI) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x gigabit ethernet - phy@mdio3: + Label: Ethernet 1 + gmac0 (ethaddr) in original firmware + 802.3at POE+ - phy@mdio4: + Label: Ethernet 2 + gmac1 (eth1addr) in original firmware + 18-24V passive POE (mode B) * powered only via POE The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. The initramfs image can be started using setenv bootargs 'loglevel=8 earlycon=msm_serial_dm,0x78af000 console=ttyMSM0,115200 mtdparts=spi0.0:256k(0:SBL1),128k(0:MIBIB),384k(0:QSEE),64k(0:CDT),64k(0:DDRPARAMS),64k(0:APPSBLENV),512k(0:APPSBL),64k(0:ART),64k(0:custom),64k(0:KEYS),15552k(inactive),15552k(inactive2)' tftpboot 0x84000000 openwrt-ipq40xx-openmesh_a62-initramfs-fit-uImage.itb set fdt_high 0x85000000 bootm 0x84000000 Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* ipq40xx: fix gpio-hog related boot issuesSven Eckelmann2018-04-236-6/+109
| | | | | | | | | | | | | | | The pinctrl initialization fails with the MSM pinctrl code and gpio-hogs because either the gpio ranges are not yet initialized (missing gpio-range in DT) or that the msm driver unconditionally tries to re-initializes the ranges (gpio-range in DT). To allow gpio-hogs and similar early-boot gpio code, the gpio-ranges must be in the device tree and the pinctrl-msm code must check whether the range was already initialized by the DT. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [drop changes to unrelated dtsi files, refresh patches] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq-wifi: drop custom board-2.binsSven Eckelmann2018-04-237-7/+3
| | | | | | | | | | | | | The BDFs for all boards were upstreamed to the ath10k-firmware repository and are now part of ath10k-firmware 2018-04-19. We switched to the upstream board-2.bin, hence the files can be removed here. Keep the ipq-wifi package in case new boards are added. It might take some time till board-2.bins send upstream are merged. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* ipq40xx: use upstream board-2.binSven Eckelmann2018-04-235-10/+11
| | | | | | | The BDFs for all boards were upstreamed to the ath10k-firmware repository and are now part of ath10k-firmware 2018-04-19. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* firmware: ath10k-firmware: update to 2018-04-19Sven Eckelmann2018-04-231-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * introduces the BDFs in /lib/firmware/ath10k/QCA4019/hw1.0/board-2.bin for: - 8devices Jalapeno - Asus RT-AC58U - AVM FRITZ!Box 4040 - GL.iNet GL-B1300 - Meraki MR33 - Netgear EX6100v2 - Netgear EX6150v2 - OpenMesh A62 * introduces the BDFs in /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin - OpenMesh A62 * adds new firmware for QCA6174 hw3.0 - firmware-6.bin_RM.4.4.1.c1-00038-QCARMSWP-1 - firmware-6.bin_RM.4.4.1.c1-00041-QCARMSWP-1 * various undocumented BDF updates to: - QCA4019 hw1.0: + bus=ahb,bmi-chip-id=0,bmi-board-id=16 + bus=ahb,bmi-chip-id=0,bmi-board-id=17 + bus=ahb,bmi-chip-id=0,bmi-board-id=19 + bus=ahb,bmi-chip-id=0,bmi-board-id=20 + bus=ahb,bmi-chip-id=0,bmi-board-id=21 + bus=ahb,bmi-chip-id=0,bmi-board-id=29 + bus=ahb,bmi-chip-id=0,bmi-board-id=30 - QCA9888 hw2.0: + bus=pci,bmi-chip-id=0,bmi-board-id=16 + bus=pci,bmi-chip-id=0,bmi-board-id=17 + bus=pci,bmi-chip-id=0,bmi-board-id=18 + bus=pci,bmi-chip-id=0,bmi-board-id=23 + bus=pci,bmi-chip-id=0,bmi-board-id=24 + bus=pci,bmi-chip-id=0,bmi-board-id=25 - QCA9984 hw1.0: + bus=pci,bmi-chip-id=0,bmi-board-id=1 + bus=pci,bmi-chip-id=0,bmi-board-id=3 + bus=pci,bmi-chip-id=0,bmi-board-id=5 + bus=pci,bmi-chip-id=0,bmi-board-id=6 + bus=pci,bmi-chip-id=0,bmi-board-id=7 + bus=pci,bmi-chip-id=0,bmi-board-id=8 Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* odhcpd: update to latest git HEADHans Dedecker2018-04-231-4/+4
| | | | | | | 4136529 dhcpv6-ia: keep tentative assignments alive for a short time 200cc8f dhcpv6-ia: make assignment lookup more strict Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* brcm47xx: backport upstream patches for Netgear WNR1000 V3Rafał Miłecki2018-04-2317-137/+383
| | | | | | This includes fix for reading NVRAM content. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: update patch to read ath10k variant from DTThomas Hebb2018-04-203-13/+18
| | | | | | | | | This patch was revised upstream before being merged, and OpenWrt's copy was never updated to reflect the revision. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> [refreshed patches] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq40xx: ex61x0v2: Disable unused GMACsThomas Hebb2018-04-201-0/+1
| | | | | | | These devices have only one ethernet port. It doesn't make sense to expose the unused GMACs as separate network devices. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
* ipq40xx: Move reserved-memory DT to qcom-ipq4019.dtsiSven Eckelmann2018-04-2010-145/+89
| | | | | | | | The tz and smem reserved-memory information handled in the upstream Linux sources by the SoC specific dtsi and not by the the boards dts. Using the same approach in OpenWrt avoids unneccessary duplication. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* ipq40xx: Remove unused reserved-memory nodesSven Eckelmann2018-04-207-76/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The reserved-memory regions are mostly undocumented by QCA and are named very unspecific in the QSDK device trees. It was tried to clean them up by commit 71ed9f10a33e ("ipq40xx: Use detailed reserved memory for A42") and similar changes. The features which require these regions were mostly unknown but Senthilkumar N L <snlakshm@qti.qualcomm.com> and Sricharan Ramabadhran <srichara@qti.qualcomm.com> provided some more insight in some of them: * crash dump feature - a couple of regions used when 'qca,scm_restart_reason' dt node has the value 'dload_status' not set to 1 + apps_bl <0x87000000 0x400000> + sbl <0x87400000 0x100000> + cnss_debug <0x87400000 0x100000> + cpu_context_dump <0x87b00000 0x080000> - required driver not available in Linux - safe to remove * QSEE app execution - region tz_apps <0x87b80000 0x280000> - required driver not available in Linux - safe to remove * communication with TZ/QSEE - region smem <0x87b80000 0x280000> - driver changes not yet upstreamed - must not be removed because any access can crash kernel/program * trustzone (QSEE) private memory - region tz <0x87e80000 0x180000> - must not be removed because any access can crash kernel/program Removing the unnecessary regions saves some kilobyte of reserved-memory and cleans up the device tree: * 2560 KiB - 8devices Jalapeno - AVM FRITZ!Box 4040 - Compex WPJ428 - Meraki MR33 Access Point - OpenMesh A42 * 14336 KiB - GL.iNet GL-B1300 - Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1 Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* build: consolidate fake uImage header build commandsMathias Kresin2018-04-207-30/+20
| | | | | | | | | | | Merge the two existing functions and use a parameter for the type header field. It updates the syntax of the former mpc85xx fake ramdisk header command to be compatible with mkimage from u-boot 2018.03 and fixes the build error spotted by the build bot. Signed-off-by: Mathias Kresin <dev@kresin.me>
* wireguard: bump to 20180420Kevin Darbyshire-Bryant2018-04-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | 7cc2668 version: bump snapshot 860c7c7 poly1305: do not place constants in different sections 5f1e4ca compat: remove unused dev_recursion_level backport 7e4b991 blake2s: remove unused helper 13225fc send: simplify skb_padding with nice macro a1525bf send: account for route-based MTU bbb2fde wg-quick: account for specified fwmark in auto routing mode c452105 qemu: bump default version dbe5223 version: bump snapshot 1d3ef31 chacha20poly1305: put magic constant behind macro cdc164c chacha20poly1305: add self tests from wycheproof 1060e54 curve25519: add self tests from wycheproof 0e1e127 wg-quick.8: fix typo 2b06b8e curve25519: precomp const correctness 8102664 curve25519: memzero in batches 1f54c43 curve25519: use cmov instead of xor for cswap fa5326f curve25519: use precomp implementation instead of sandy2x 9b19328 compat: support OpenSUSE 15 3102d28 compat: silence warning on frankenkernels 8f64c61 compat: stable kernels are now receiving b87b619 62127f9 wg-quick: hide errors on save Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* hostapd: fix encrypted mesh channel settingsDaniel Golle2018-04-205-1/+226
| | | | | | | | | | | | | | | Import two patches from Peter Oh to allow setting channel bandwidth in the way it already works for managed interfaces. This fixes mesh interfaces on 802.11ac devices always coming up in VHT80 mode. Add a patch to allow HT40 also on 2.4GHz if noscan option is set, which also skips secondary channel scan just like noscan works in AP mode. This time also make sure to add all files to the patch before committing it... Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* rpcd: update to latest HEADJo-Philipp Wich2018-04-201-3/+3
| | | | | | | | | | | | 6994c87 uci: fix session delta isolation f0f6f81 session: remove redundant key attribute to rpc_session_set() 3d400c7 session: support reclaiming pending apply session eb09f3a session: ignore non-string username attribute upon restore edd37f8 uci: add rpc_uci_replace_savedir() helper 2423162 uci: switch to proper save directory on apply/rollback 66a9bad uci: fix memory leak in rpc_uci_apply_timeout() Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: pass HOSTCXX to host builds as CXXFelix Fietkau2018-04-201-0/+1
| | | | | | Fixes cmake build on some systems that also have an older clang++ Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert "hostapd: fix encrypted mesh channel settings"Felix Fietkau2018-04-205-213/+1
| | | | | | | This reverts commit 7f52919a2f2894125b4dca611eb2d30181af7e0b, which is currently breaking the builds and needs to be reworked Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mtd: fix erase handling with partition offset on writeFelix Fietkau2018-04-201-1/+1
| | | | | | | | When a partition offset is given, it is used in an lseek call, which affects write, but not erase. Add it to the offset for erase calls as well Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-envtools: remove makefile duplication for supported targetsFelix Fietkau2018-04-201-47/+4
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: disable ubifsFelix Fietkau2018-04-201-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: remove 4.9 kernel configFelix Fietkau2018-04-201-472/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>