aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: gpio-nct5104d remove boardname checkLukáš Mrtvý2018-08-081-5/+0
| | | | | | | | 'In different versions of coreboot are different names of apu boardname. No need to check boardname to load module.' Signed-off-by: Lukáš Mrtvý <lukas.mrtvy@gmail.com> (cherry picked from commit d3b8e6b2a77de8b3d5724534714ecdfd8fa6d50c)
* build: README punctuation pendantryKevin Darbyshire-Bryant2018-08-081-2/+2
| | | | | Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 79b38047b9962846912195b963230653c35900a1)
* build: Update README & github helpKevin Darbyshire-Bryant2018-08-082-17/+22
| | | | | | | | | Update README to include Openwrt branding and improve wording. Point at the Openwrt wiki in .github templates. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 5781fc6b3f4fade6229390c364c7d7cca514ec76)
* basefiles: Reword sysupgrade messageKevin Darbyshire-Bryant2018-08-081-1/+1
| | | | | | | sysupgrade 'upgrade' message more verbose than needs be. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit edf338f248a270f5fd85edc04775ec5ed6d46bca)
* linux: update license tag to use correct SPDX tagFlorian Eckert2018-08-081-1/+1
| | | | | | | Use SPDX tag. Signed-off-by: Florian Eckert <fe@dev.tdt.de> (cherry picked from commit c79ef6fbe39b0626214542a0de141da092be193c)
* kernel: usb: dwc2 DMA alignment fixesAntti Seppälä2018-08-082-0/+176
| | | | | | | | | | | Add two patches submitted for upstream review that significantly improve the dwc2 driver on openwrt from kernel stability and performance perspectives. Fixes: FS#1367 Signed-off-by: Antti Seppälä <a.seppala@gmail.com> (cherry picked from commit 9f451ec698ede068e911821473cbe94f50a2977c)
* firmware: amd64-microcode: update to 20180524Zoltan HERPAI2018-08-081-2/+2
| | | | | | | | | | | | | | * New microcode update packages from AMD upstream: + New Microcodes: sig 0x00800f12, patch id 0x08001227, 2018-02-09 + Updated Microcodes: sig 0x00600f12, patch id 0x0600063e, 2018-02-07 sig 0x00600f20, patch id 0x06000852, 2018-02-06 * Adds Spectre v2 (CVE-2017-5715) microcode-based mitigation support, plus other unspecified fixes/updates. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> (cherry picked from commit 10e393262caeba1e9cbdcc937d20fe15ad5f448a)
* kernel: remove linux 4.4 supportKoen Vandeputte2018-08-08270-42111/+1
| | | | | | No targets are using it anymore Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: remove linux 3.18 supportKoen Vandeputte2018-08-08260-41440/+1
| | | | | | No targets are using it anymore Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* libubox: fix mirror hashJo-Philipp Wich2018-08-071-1/+1
| | | | | | | | | | | | Correct the mirror hash to reflect whats on the download server. A locally produced libubox SCM tarball was also verified to yield an identical checksum compared to the one currently on the download server. Fixes FS#1707. Fixes 5dc32620c4 ("libubox: update to latest git HEAD") Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 432eaa940fee0b8023bee122da4cb08f3216209f)
* netifd: update to latest git HEADJohn Crispin2018-08-061-3/+3
| | | | | | | | | | | | | | | | | | | | | | | a0a1e52 fix compile error 75ee790 interface-ip: fix eui64 ifaceid generation (FS#1668) ca97097 netifd: make sure the vlan ifname fits into the buffer b8c1bca iprule: remove bogus assert calls a2f952d iprule: fix broken in_dev/out_dev checks 263631a vlan: use alloca to get rid of IFNAMSIZE in vlan_dev_set_name() 291ccbb ubus: display correct prefix size for IPv6 prefix address 908a9f4 CMakeLists.txt: add -Wimplicit-fallthrough to the compiler flags b06b011 proto-shell.c: add a explicit "fall through" comment to make the compiler happy 60293a7 replace fall throughs in switch/cases where possible with simple code changes 5cf7975 iprule: rework interface based rules to handle dynamic interfaces 57f87ad Introduce new interface event "create" (IFEV_CREATE) 03785fb system-linux: fix build error on older kernels d1251e1 system-linux: adjust bridge isolate mode for upstream attribute naming e9eff34 system-linux: extend link mode speed definitions c1f6a82 system-linux: add autoneg and link-partner output Signed-off-by: John Crispin <john@phrozen.org> (cherry picked from commit 3c4eeb5d21073dea5a021012f9e65ce95f81806e) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* Revert "mt7620: gsw: make IntPHY and ExtPHY share mdio addr 4 possible"Jo-Philipp Wich2018-08-061-6/+0
| | | | | | | | | | | | | | | | This reverts commit b40316c21a960d332bc9b04ee1791b8aafcf8786. That change causes ramips/mt7620 to fail with: drivers/net/ethernet/mtk/gsw_mt7620.c: In function 'mt7620_hw_init': drivers/net/ethernet/mtk/gsw_mt7620.c:171:14: error: 'mdio_mode' undeclared (first use in this function); did you mean 'd_move'? } else if (!mdio_mode) { ^~~~~~~~~ d_move Back it out for now to restore compilation. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: add missing ARM64_SSBD symbolStijn Tintel2018-08-066-0/+6
| | | | | | | | | | In 4.14.57, a new symbol for Spectre v4 mitigation was introduced for ARM64. Add this symbol to all ARM64 targets using kernel 4.14. This mitigates CVE-2018-3639 on ARM64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 77e3e706ce0dfe653a28e088bdcf0acddead0091)
* mt7620: gsw: make IntPHY and ExtPHY share mdio addr 4 possibleChen Minqiang2018-08-061-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | To share mdio addr for IntPHY and ExtPHY, as described in the documentation (MT7620_ProgrammingGuide.pdf). (refer: http://download.villagetelco.org/hardware/MT7620/MT7620_ProgrammingGuide.pdf) when port4 setup to work as gmac mode, dts like: &gsw { mediatek,port4 = "gmac"; }; we should set SYSCFG1.GE2_MODE==0x0 (RGMII). but SYSCFG1.GE2_MODE may have been set to 3(RJ-45) by uboot/default so we need to re-set it to 0x0 before this changes: gsw: 4FE + 2GE may not work correctly and MDIO addr 4 cannot be used by ExtPHY after this changes: gsw: 4FE + 2GE works and MDIO addr 4 can be used by ExtPHY Signed-off-by: Chen Minqiang <ptpt52@gmail.com> (cherry picked from commit f6d81e2fa1f110d8025eaa434d67d0014aca1d42)
* ramips: fix gigabit switch PHY access on MDIODaniel Gimpelevich2018-08-061-1/+2
| | | | | | | | | | | When PHY's are defined on the MDIO bus in the DTS, gigabit support was being masked out for no apparent reason, pegging all such ports to 10/100. If gigabit support must be disabled for some reason, there should be a "max-speed" property in the DTS. Reported-by: James McKenzie <openwrt@madingley.org> Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> (cherry picked from commit 379fe506729a20c5fdb072840cb662b032e90c36)
* kernel: bump 4.14 to 4.14.60 for 18.06Stijn Segers2018-08-0654-660/+164
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Refreshed patches. * Patches made redundant by changes upstream: - target/linux/ramips/patches-4.14/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch * Patches accepted upstream: - target/linux/apm821xx/patches-4.14/020-0001-crypto-crypto4xx-remove-bad-list_del.patch - target/linux/apm821xx/patches-4.14/020-0011-crypto-crypto4xx-fix-crypto4xx_build_pdr-crypto4xx_b.patch - target/linux/brcm63xx/patches-4.14/001-4.15-08-bcm63xx_enet-correct-clock-usage.patch - target/linux/brcm63xx/patches-4.14/001-4.15-09-bcm63xx_enet-do-not-write-to-random-DMA-channel-on-B.patch - target/linux/generic/backport-4.14/080-net-convert-sock.sk_wmem_alloc-from-atomic_t-to-refc.patch - target/linux/generic/pending-4.14/900-gen_stats-fix-netlink-stats-padding.patch The ext4 regression introduced in 4.14.55 has been fixed by 4.14.60 (commit f547aa20b4f61662ad3e1a2040bb3cc5778f19b0). Fixes the following CVEs: - CVE-2018-10876 - CVE-2018-10877 - CVE-2018-10879 - CVE-2018-10880 - CVE-2018-10881 - CVE-2018-10882 - CVE-2018-10883 Thanks to Stijn Tintel for the CVE list :-). Compile-tested on: ramips/mt7621, x86/64 Run-tested on: ramips/mt7621, x86/64 Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* kernel: bump 4.9 to 4.9.117 for 18.06Stijn Segers2018-08-0650-575/+319
| | | | | | | | | | | | | | | | | | | | | | | * Refreshed patches. * Removed patches: - target/linux/ar71xx/patches-4.9/103-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch superseded by upstream - target/linux/ar71xx/patches-4.9/403-mtd_fix_cfi_cmdset_0002_status_check.patch superseded by upstream - target/linux/brcm63xx/patches-4.9/001-4.11-01-mtd-m25p80-consider-max-message-size-in-m25p80_read.patch accepted upstream - target/linux/brcm63xx/patches-4.9/001-4.15-08-bcm63xx_enet-correct-clock-usage.patch accepted upstream - target/linux/brcm63xx/patches-4.9/001-4.15-09-bcm63xx_enet-do-not-write-to-random-DMA-channel-on-B.patch accepted upstream - target/linux/generic/pending-4.9/900-gen_stats-fix-netlink-stats-padding.patch * New backported patch to address ext4 breakage, introduced in 4.9.112: - backport-4.9/500-ext4-fix-check-to-prevent-initializing-reserved-inod.patch Also add ARM64_SSBD symbol to ARM64 targets still running kernel 4.9 Thanks to Koen Vandeputte for pointing out the need to add the ARM64_SSBD symbol, and the ext4 patch. Compile-tested on: ar71xx Run-tested on: ar71xx Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* uclient: update to latest git HEADJo-Philipp Wich2018-08-031-3/+3
| | | | | | | | | | | | | | | f2573da uclient-fetch: use package name pattern in message for missing SSL library 9fd8070 uclient-fetch: Check for nullpointer returned by uclient_get_url_filename f41ff60 uclient-http: basic auth: Handle memory allocation failure a73b23b uclient-http: auth digest: Handle multiple possible memory allocation failures 66fb58d uclient-http: Handle memory allocation failure 2ac991b uclient: Handle memory allocation failure for url 63beea4 uclient-http: Implement error handling for header-sending eb850df uclient-utils: Handle memory allocation failure for url file name ae1c656 uclient-http: Close ustream file handle only if allocated Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit e44162ffca448d024fe023944df702c9d3f6b586)
* sdk: include arch/arm/ Linux includes along with arch/arm64/ onesJo-Philipp Wich2018-08-031-1/+7
| | | | | | | | | | | | The Linux headers on arm64 architectures contain references to common arch/arm/ headers which were not bundled by the SDK so far. Check if we're packing the SDK for an arm64 target and if we do, also include arch/arm headers as well. Fixes FS#1725. Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 4bb8a678e0e0eaf5c3651cc73f3b2c4cb1d267a2)
* iperf: bump to 2.0.12Koen Vandeputte2018-08-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2.0.12 change set (as of June 25th 2018) o Change the unicast TTL default value from 1 to the system default (to be compatable with previous versions.) Mulitcast still defaults to 1. o adpative formatting bug fix: crash occurs when values exceed 1 Tera. Add support for Tera and Peta and eliminate the potential crash condition o configure default compile to include isochronous support (use configure --disable-isochronous to remove support) o replace 2.0.11's --vary-load option with a more general -b option to include <mean>,<stdev>, e.g. -b 100m,40m, which will pull from a log normal distribution every 0.1 seconds o fixes for windows cross compile (using mingw32) o compile flags of -fPIE for android o configure --enable-checkprograms to compile ancillary binaries used to test things such as delay, isoch, pdf generation o compile tests when trying to use 64b seq numbers on a 32b platform o Fix GCC ver 8 warnings 2.0.11 change set (as of May 24th, 2018) o support for -b on server (read rate limiting) o honor -T (ttl) for unicast. (Note: the default value is 1 so this will impact unicast tests that require routing) o support for --isochronous traffic with optional frames per second, mean and variance uses a log normal distribution (requires configure w/-enable-isochronous and compile) o support for --udp triggers (requires configure w/ --enable-udptriggers, early code with very limited support) o support for --udp-histogram with optional bin width and number of bins (default is 1 millisecond bin width and 1000 bins) o support for frame (burst) latency histograms when --isochronous is set o support for --tx-sync with -P for synchonrized writes. Initial use is for WiFi OFDMA latency testing. o support for --incr-dstip with -P for simultaneous flows to multiple destinations (use case is for OFDMA) o support for --vary-load with optional weight, uses log normal distribution (requires -b to set the mean) o support for --l2checks to detect L2 length errors not detected by v4 or v6 payload length errors (requires linux, berkeley packet filters BPFs and AF_PACKET socket support) o support for server joining mulitcast source specific multicast (S,G) and (*,G) for both v4 and v6 on platforms that support it o improved write counters (requires -e) o accounting bug fix on client when write fails, this bug was introduced in 2.0.10 o slight restructure client/server traffic thread code for maintainability o python: flow example script updates o python: ssh node object using asyncio o python: histograms in flows with plotting (assumed gnuplot available) o python: hierarchical clustering of latency histograms (early code) o man pages updates o Note: latency histograms require client and server system clock synchronization. A GPS disciplined oscillator using Precision Time Protocol works well for this. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* sdk: bundle usbip userspace sourcesJo-Philipp Wich2018-08-011-0/+4
| | | | | | | | | Bundle the usbip utility sources shipped with the Linux kernel tree in order to allow the usbip packages from the package feed to build within the OpenWrt SDK. Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit d0e0b7049f88774e67c3d5ad6b573f7070e5f900)
* include/feeds.mk: fix distfeeds.conf without per-feed reposBjørn Mork2018-07-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit 514a4b3e1b4e4 ("include/feeds.mk: rework generation of opkg distfeeds.conf") made the per-feed "base" repo unconditional, making the default configuration fail when PER_FEED_REPO is disabled: root@wrt1900ac-1:~# cat /etc/opkg/distfeeds.conf src/gz openwrt_core http://openwrt.mork.no/18.06.0/targets/mvebu/cortexa9/packages src/gz openwrt_base http://openwrt.mork.no/18.06.0/packages/arm_cortex-a9_vfpv3/base root@wrt1900ac-1:~# opkg update Downloading http://openwrt.mork.no/18.06.0/targets/mvebu/cortexa9/packages/Packages.gz Updated list of available packages in /var/opkg-lists/openwrt_core Downloading http://openwrt.mork.no/18.06.0/targets/mvebu/cortexa9/packages/Packages.sig Signature check passed. Downloading http://openwrt.mork.no/18.06.0/packages/arm_cortex-a9_vfpv3/base/Packages.gz *** Failed to download the package list from http://openwrt.mork.no/18.06.0/packages/arm_cortex-a9_vfpv3/base/Packages.gz Collected errors: * opkg_download: Failed to download http://openwrt.mork.no/18.06.0/packages/arm_cortex-a9_vfpv3/base/Packages.gz, wget returned 8. Cc: Matthias Schiffer <mschiffer@universe-factory.net> Fixes: 514a4b3e1b4e ("include/feeds.mk: rework generation of opkg distfeeds.conf") Signed-off-by: Bjørn Mork <bjorn@mork.no> [whitespace/indentation fix] Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit c72f3b5e2b7e9a86488046bb6e2396f2354b82c9)
* bcm53xx: backport BCM5301X/BCM53573 dts commits from 4.19+Rafał Miłecki2018-07-317-104/+475
| | | | | | | | This includes Linksys EA9500 support, BCM53573 timer fix and upstream-ready partitions patch that replaces two downstream hacks. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit a07730472c49c1f7bb56afa3eb8be23e6e87b4f1)
* bcm53xx: switch USB 3.0 PHY DT description to use MDIO busRafał Miłecki2018-07-312-1/+459
| | | | | | | | | | | | | USB 3.0 PHY is attached to the MDIO bus and should be supported (accessed) as a MDIO device. This wasn't known initially which resulted in writing driver that was working with MDIO bus (using some magic values) without knowing it. This commit updates DT to properly describe MDIO & USB 3.0 PHY and enables required kernel drivers. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 8a175ea2198f59795113a3857f6a742a455ad54f)
* bcm53xx: backport DT fix for I2C controller interruptRafał Miłecki2018-07-311-0/+24
| | | | | | | Specified interrupt type was incorrect. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 5c8b8a3fd4be9702940859c1e1e5c3f1b4f33f50)
* kernel: backport mtd support for subpartitions in DTRafał Miłecki2018-07-3118-36/+402
| | | | | | | | | | | | | | | | | This is a new & warm feature that allows nesting partiitons in DT and mixing their types (e.g. static vs. dynamic). It's very useful for boards that have most partitions static but some of them require extra parsing (e.g. a "firmware" partition). It's required to successfully backport support for new devices using that new syntax in their DT files. Since brcm63xx has a custom alternative patch the upstream one is being reverted for it. The plan is to make brcm63xx use the upstream implementation. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 2a598bbaa3f75b7051c2453a6ccf706191cf2153)
* kernel: backport mtd patches with Broadcom of_match_table-sRafał Miłecki2018-07-315-19/+168
| | | | | | | | Two tiny & trivial patches with no regression risk. One simplifies bcm53xx downstream patch. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 6bcafea2c04849e8a9cca71a7759b20d1010d643)
* Re-enable arbitrary IPv6 addresses as outer ip4-in-ip6 tunnel source addressAxel Neumann2018-07-314-4/+4
| | | | | | | | | | | | | | | | | The 666-Add-support-for-MAP-E-FMRs-mesh-mode.patch kernel patches break the possibility for using an ip4ip6 tunnel interface as a fall back interface accepting ip4-in-ip6 tunneled packets from any remote address. This works out of the box with any normal (non-666-patched) kernel and can be configured by setting up an 'ip -6 tunnel' with type 'any' or 'ip4ip6' and a remote address of '::'. The misbehavior comes with line 290 the patch which discards all packets that do not show the expected saddr, even if no single fmr rule was defined and despite the validity of the saddr was already approved earlier. Signed-off-by: Axel Neumann <neumann@cgws.de> Acked-by: Hans Dedecker <dedeckeh@gmail.com> (cherry picked from 65c05301c2)
* kernel: remove duplicate #define's in at803x Ethernet PHY driverDaniel Golle2018-07-312-20/+14
| | | | | | | | | | | | AT803X_REG_CHIP_CONFIG and AT803X_BT_BX_REG_SEL have been defined upstream by commit f62265b53ef3 ("at803x: double check SGMII side autoneg") An existing local patch then added those exact same defines again which isn't necessary, so remove them. Fixes: f791fb4af450 ("kernel: add linux 4.9 support") Fixes: b3f95490b9be ("kernel: generic: Add kernel 4.14 support") Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 67fcff6aaf)
* kernel: re-add patch for AT8032 Ethernet PHYDaniel Golle2018-07-314-11/+81
| | | | | | | | | | | The patch was wrongly removed by a kernel version bump to 4.9.106 in the believe that it was merged upstream thow it wasn't. This lead to unrecoverable link losses on devices which use those PHYs such as many ubnt single-port CPEs. Fixes: 6f8eb1b50f ("kernel: bump 4.9 to 4.9.106 for 18.06") Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit a497e47762)
* ca-certificates[18.06]]: remove myself as PKG_MAINTAINERChristian Schoenebeck2018-07-311-1/+1
| | | | | | remove myself as PKG_MAINTAINER Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
* OpenWrt v18.06.0: revert to branch defaultsJo-Philipp Wich2018-07-305-11/+9
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* OpenWrt v18.06.0: adjust config defaultsv18.06.0Jo-Philipp Wich2018-07-305-9/+11
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "ar71xx: define switch for rb-952ui-5ac2nd"Jo-Philipp Wich2018-07-301-2/+2
| | | | | | | | | This reverts commit 3442ec5d5724ca747c9f76b949dc8d21c94228c0. The device behaviour is reportedly erratic so let's not take chances and leave this out for now. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: define switch for rb-952ui-5ac2ndThibaut VARÈNE2018-07-301-2/+2
| | | | | | | | QCA9533 built-in switch can be configured Tested-by: Thibaut VARÈNE <hacks@slashdirt.org> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> (cherry picked from commit 0e43c31ebde996ca88f5857bb7e6c4cbf3f65756)
* imagebuilder: add function to show manifestPaul Spooren2018-07-301-2/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | Tested with 18.06.0-rc2/ar71xx/generic/tl-wdr4300-v1, image & list This PR is based on the work of @fewckert[1] with slight improvements. Add function `manifest` to show the manifest of the produced image, before actually building it. The manifest contains an orderd list of package name and version. This is usefull to check package dependencies but also determine a unique and reproducible image name before building the package. The sysupgrade server[2] builds images on request with individual package selection. To distignish between created images which contain differnt packages, the EXTRA_IMAGE_NAME is set to a shortend hash of the manifest's content. So far the image was renamed afterwards as the manifests content was unknown, however this corrupts the signed sha256sums. This patch allows a clean solution as to dtermine the manifest in advance and set the EXTRA_IMAGE_NAME accordingly. [1]: https://github.com/lede-project/source/pull/1591 [2]: https://github.com/aparcar/attendedsysupgrade-server Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry-picked from commit 869b0d11db)
* ar71xx:add support for E750G v8张鹏2018-07-3012-2/+194
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Qxwlan E750G v8 is based on Qualcomm QCA9344. Specification: - 560/450/225 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4G GHz (AR9344) - 2x 10/100 Mbps Ethernet (PoE support) - 2x 10/100/1000 Mbps Ethernet - 7x LED (6 driven by GPIO) - 1x button (reset) - 1x DC jack for main power input (9-48 V) - UART (J23) and LEDs (J2) headers on PCB Flash instruction (using U-Boot CLI and tftp server): - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "sysupgrade" filename to "firmware.bin" and place it in tftp server directory. - Connect PC with one of RJ45 ports, power up the board and press "enter" key to access U-Boot CLI. - Use the following command to update the device to OpenWrt: "run lfw". Flash instruction (using U-Boot web-based recovery): - Configure PC with static IP 192.168.1.xxx(2-254)/24. - Connect PC with one of RJ45 ports, press the reset button, power up the board and keep button pressed for around 6-7 seconds, until LEDs start flashing. - Open your browser and enter 192.168.1.1, select "sysupgrade" image and click the upgrade button. Signed-off-by: 张鹏 <sd20@qxwlan.com> (cherry picked from commit 53a45020135b504cb4bee0fa8d98c8eaf6391066)
* ar71xx:add support for E750A v4张鹏2018-07-3011-1/+163
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Qxwlan E750A v4 is based on Qualcomm QCA9344. Specification: - 560/450/225 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 5G GHz (AR9344) - 2x 10/100 Mbps Ethernet (one port with PoE support) - 1x miniPCIe slot (USB 2.0 bus only) - 7x LED (6 driven by GPIO) - 1x button (reset) - 1x DC jack for main power input (9-48 V) - UART (J23) and LEDs (J2) headers on PCB Flash instruction (using U-Boot CLI and tftp server): - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "sysupgrade" filename to "firmware.bin" and place it in tftp server directory. - Connect PC with one of RJ45 ports, power up the board and press "enter" key to access U-Boot CLI. - Use the following command to update the device to OpenWrt: "run lfw". Flash instruction (using U-Boot web-based recovery): - Configure PC with static IP 192.168.1.xxx(2-254)/24. - Connect PC with one of RJ45 ports, press the reset button, power up the board and keep button pressed for around 6-7 seconds, until LEDs start flashing. - Open your browser and enter 192.168.1.1, select "sysupgrade" image and click the upgrade button. Signed-off-by: 张鹏 <sd20@qxwlan.com> (cherry picked from commit ac03d51a3f4daa2f6a2a83f041dcd71674a9f724)
* ar71xx:add support for E558 v2张鹏2018-07-3012-0/+217
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Qxwlan E558 v2 is based on Qualcomm QCA9558 + AR8327. Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz (QCA9558) - 3x 10/100/1000 Mbps Ethernet (one port with PoE support) - 4x miniPCIe slot (USB 2.0 bus only) - 1x microSIM slot - 5x LED (4 driven by GPIO) - 1x button (reset) - 1x 3-pos switch - 1x DC jack for main power input (9-48 V) - UART (JP5) and LEDs (J8) headers on PCB Flash instruction (using U-Boot CLI and tftp server): - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "sysupgrade" filename to "firmware.bin" and place it in tftp server directory. - Connect PC with one of RJ45 ports, power up the board and press "enter" key to access U-Boot CLI. - Use the following command to update the device to OpenWrt: "run lfw". Flash instruction (using U-Boot web-based recovery): - Configure PC with static IP 192.168.1.xxx(2-254)/24. - Connect PC with one of RJ45 ports, press the reset button, power up the board and keep button pressed for around 6-7 seconds, until LEDs start flashing. - Open your browser and enter 192.168.1.1, select "sysupgrade" image and click the upgrade button. Signed-off-by: 张鹏 <sd20@qxwlan.com> (cherry picked from commit b74f63f81d6121b5eace3f0c0c87399f7e0fde92)
* brcm2708: split sdcard.img.gz into a sysupgrade and factory imageChristian Lamparter2018-07-301-2/+3
| | | | | | | | | | | | | | | | | | | @vahid-dan reported a issue with extracting the rpi images with Gnome's Archive Manager: "Ubuntu Archive Manager cannot extract the file and it just throws a general error message: "An error occurred while extracting files". <https://forum.lede-project.org/t/corrupted-pre-built-v18-06-0-rc2-image-for-rpi> @blogic told me to split the single sdcard.img.gz for the RPi into a sysupgrade and a factory image for all brcm2708 targets. The factory images will have no metadata attached, this way these utilities that can't deal with the attached metadata will not fail for no reason. Cc: John Crispin <john@phrozen.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 7516a960113d512cb2909f40bd07caf2a6c547b1)
* base-files: network.sh: gracefully handle missing network.interface ubus nsJo-Philipp Wich2018-07-302-5/+11
| | | | | | | | | | | | | | | | | | | | | When attempting to use any of the functions in network.sh while netifd is not started yet, the ubus interface dump query will fail with "Not found", yielding an empty response. Subsequently, jsonfilter is invoked with an empty string instead of a valid JSON document, causing it to emit a second "unexpected end of data" error. This caused the dnsmasq init script to log the following errors during early boot on some systems: procd: /etc/rc.d/S19dnsmasq: Command failed: Not found. procd: /etc/rc.d/S19dnsmasq: Failed to parse json data: unexpected end of data. Fix the issue by allowing the ubus query to fail with "Not found" but still logging other failures, and by passing an empty JSON object to jsonfilter if the interface status cache is empty. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* iwinfo: update to version 2018-07-24Nick Hainke2018-07-301-4/+4
| | | | | | | | | | Update to new iwinfo version. Adds support for channel survey. Adds ubus support. Etc. Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 296ae7ab89c179ff39feff973000fcb864754df7)
* iwinfo: bump to latest git HEADJohn Crispin2018-07-301-3/+3
| | | | | | | | | e59f925 hardware: add device ids for QCA9984, 88W8887 and 88W8964 radios 2a82f87 nl80211: back out early when receiving FAIL-BUSY reply 77c32f0 nl80211: fix code calculating average signal and rate Signed-off-by: John Crispin <john@phrozen.org> (cherry picked from commit 20b76c0a5bb7a13dcc739bd644f0f968e3b3c68a)
* ar71xx: rbspi: fix RB wAP AC gpio conflict and LEDThibaut VARÈNE2018-07-302-11/+9
| | | | | | | | | | | | | | | | e15c63a37574bd15ce3a6636c2f04741ab76f7b9 introduced code that was trying to register GPIO 1 as both an LED and a button. The OEM source makes it clear that LED1 is not wired to the SoC GPIOs. GPIO 1 is the reset button. Furthermore the (green) power led default state should also be defined, (matching OEM source), and it should be used by diag.sh since it's currently the only software-controllable LED. This patch fixes these issues and renames the corresponding #defines for clarity Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> (cherry picked from commit e99f760235bb45716018faab52d31ce8165f49a0)
* ar71xx: add missing diag LED support for RB wAP 2nDThibaut VARÈNE2018-07-301-1/+2
| | | | | | | | 3b15eb06c366cf3805590a61f22e966a95bf8101 did not include diag.sh edit Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> (cherry picked from commit 5c2419b6f82e2ec49ecac17ae17fdbdb151701c7)
* brcm47xx: rework model detectionJo-Philipp Wich2018-07-302-18/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | On brcm47xx boards, the model ID is the combination of the "boardtype" nvram variable and an optional supplemental "boardnum" variable while the human readable model name is usually exposed in the "machine" field of the /proc/cpuinfo file. Move the extraction of the board nvram variables and model name string into the 01_sysinfo file and rework the 01_detect board configuration script to solely use the prepared sysinfo values without performing own detection logic. As a consequence, we can drop the ucidef_set_board_id() and ucidef_set_model_name() invocations in favor to the generic behaviour which copies the /tmp/sysinfo/{board_name,model} values into the board.json "id" and "name" fields respectively. Since "01_detect" only contains network configuration logic after this change, move it to "01_network" and rename the contained "detect_by_xxx" functions to "configure_by_xxx" instead, to avoid potential confusion. Fixes FS#1576 Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit d7d10f2c1e8511fe07c9760e85f2272a85168f8d)
* bcm53xx: revert SPI controller commit breaking flash readsRafał Miłecki2018-07-291-0/+146
| | | | | | | | That upstream commit caused instability in flash reads. It was reported but there isn't any proper fix as for now. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 0417b08b06dd946c2670d0a19e3426c61e33f6be)
* dnsmasq: bump to dnsmasq v2.80test3Kevin Darbyshire-Bryant2018-07-2820-1565/+6
| | | | | | | | | | | | | | | | | | Refresh patches Upstream commits since last bump: 3b6eb19 Log DNSSEC trust anchors at startup. f3e5787 Trivial comment change. c851c69 Log failure to confirm an address in DHCPv6. a3bd7e7 Fix missing fatal errors when parsing some command-line/config options. ab5ceaf Document the --help option in the french manual 1f2f69d Fix recurrent minor spelling mistake in french manual f361b39 Fix some mistakes in french translation of the manual eb1fe15 When replacing cache entries, preserve CNAMES which target them. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 1e93ef84981f2722138824413a1b197fdab7fb6c)
* dnsmasq: don't use network functions at boottime (FS#1542)Hans Dedecker2018-07-282-6/+15
| | | | | | | | | | | | | As dnsmasq is started earlier than netifd usage of network.sh functions at boottime will fail; therefore don't call at boottime the functions which construct the dhcp pool/relay info. As interface triggers are installed the dhcp pool/relay info will be constructed when the interface gets reported as up by netifd. At the same time also register interface triggers based on DHCP relay config. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (cherry picked from commit 2336b942b37f265c59547d738ca558b61102833d)
* dnsmasq: bump to latest patches on 2.80rc2Kevin Darbyshire-Bryant2018-07-2819-11/+406
| | | | | | | | | | | | | | | | Refresh patches and backport upstream to current HEAD: a997ca0 Fix sometimes missing DNSSEC RRs when DNSSEC validation not enabled. 51e4eee Fix address-dependent domains for IPv6. 05ff659 Fix stupid infinite loop introduced by preceding commit. db0f488 Handle some corner cases in RA contructed interfaces with addresses changing interface. 7dcca6c Warn about the impact of cache-size on performance. 090856c Allow zone transfer in authoritative mode whenever auth-peer is specified. cc5cc8f Sane error message when pcap file header is wrong. c488b68 Handle standard and contructed dhcp-ranges on the same interface. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit fbf475403b911f46e91b57fb7a6cf3c65276464c)
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-10 12:35:15 +0000