aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* image: specify max image size in Kilobyte/MegabyteMathias Kresin2016-09-045-43/+24
| | | | | | Use the k and m unit suffix to be consistent with the blocksize. Signed-off-by: Mathias Kresin <dev@kresin.me>
* image: use k as unit suffix for blocksizeMathias Kresin2016-09-049-23/+23
| | | | | | | Use k as unit suffix for kilobyte to have a the same unit regardless of the used filesystem. Signed-off-by: Mathias Kresin <dev@kresin.me>
* image: pass device blocksize to padjffs2Mathias Kresin2016-09-031-1/+2
| | | | | | | | | | | | | | | | | | At the moment the padding steps are hardcoded. Especially images for devices with a 4K sector size can be unnecessarily bloated using the hardcoded padding steps. It has been observed that 192Kb of padding was added to the image of a 4MB device, albeit due to the 4K sector size the minimum required extra padding for the jffs2 rootfs_data is 20Kb. In worst case it means that the image-size check could fail albeit there is enough space for all selected packages For device build code not exposing the blocksize, use the hardcoded padding further on. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: mtd: backport Macronix sector size fixMathias Kresin2016-09-035-29/+44
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* apm821xx: image: add support for k unit suffix to boot-imgMathias Kresin2016-09-081-1/+1
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* image: add support for k unit suffix to append-ubiMathias Kresin2016-09-041-1/+1
| | | | | | | Allows to use the same unit for all definitions of the blocksize to be consistent regardless of the used filesystem. Signed-off-by: Mathias Kresin <dev@kresin.me>
* image: add support for k unit suffix to pad-offsetMathias Kresin2016-09-031-2/+2
| | | | | | | Allows to specificy the padding and offset in kilobytes to be consistent with pad-to. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: use lower case names for TEW-69xGR imagesMathias Kresin2016-09-091-4/+4
| | | | | | | Use lower case variant of the device name for to images to be consistent with all other images names. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix wrong TARGET_DEVICESMathias Kresin2016-09-081-1/+1
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix wrong device titleMathias Kresin2016-09-081-1/+1
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* firmware-utils: mksenaofw: rework option validationMathias Kresin2016-08-171-19/+22
| | | | | | | The options firmware_type, vendor_id and product_id are not required for decoding an image file. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add support for Mercury MAC1200R v2Daniel Golle2016-09-096-0/+111
| | | | | | | | MT7628AN + MT7612E, 8MB SPI flash, 64MB DDR RAM reset button GPIO is still missing (anyone?) bootloader password is 'slp' Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: small image improvements for kd20Daniel Golle2016-09-091-2/+4
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm53xx: enable switch port 5 on Tenda AC9Rafał Miłecki2016-09-081-1/+6
| | | | | | | Now b53 forces port 5 link when needed, we can enable it on Tenda AC9 and start using eth1. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: b53: force BCM531x5 port 5 link state if enabledRafał Miłecki2016-09-081-0/+13
| | | | | | | | | | | Some devices (e.g. Tenda AC9 based on BCM47189B0) have BCM53125 with port 5 connected to the second Ethernet interface on the SoC. In such case there is no PHY and we need to force link manually. This assumes port 5 can be marked as enabled for such devices. It's not implemented yet unfortunately. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: use upstream queued patches for R8500 and AC9Rafał Miłecki2016-09-084-43/+37
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: move bcma BCM53573 patch to bcma 4.9 backportsRafał Miłecki2016-09-081-22/+0
| | | | | | This patch has been accepted for 4.9. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* imx6: override default inittab to add video console ttyTim Harvey2016-09-081-0/+4
| | | | | | | Adds the following to the default inittab tty1::askfirst:/bin/ash --login Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx6: image: remove pca955x/ds1672/at24 from Ventana kernel modulesTim Harvey2016-09-081-1/+1
| | | | | | These need to be static in the kernel for Ventana Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* images: bump default rootfs size to 256 MBFelix Fietkau2016-09-081-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* f2fs-tools: import from packages, clean up, and update to latestFelix Fietkau2016-09-084-0/+174
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dnsmasq: Don't expose *.bind data incl versionKevin Darbyshire-Bryant2016-09-082-1/+150
| | | | | | | | | | | | | Don't expose dnsmasq version & other data to clients via the *.bind pseudo domain. This uses a new 'NO_ID' compile time option which has been discussed and submitted upstream. This is an alternate to replacing version with 'unknown' which affects the version reported to syslog and 'dnsmasq --version' Run time tested with & without NO_ID on Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* mac80211: remove the fq-disable hack, now that reordering is fixedFelix Fietkau2016-09-081-15/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix packet loss on fq reorderingFelix Fietkau2016-09-083-110/+481
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: update to version 2016-09-05Felix Fietkau2016-09-0823-198/+98
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: merge a softirq performance improvement patchFelix Fietkau2016-09-081-0/+83
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* e2fsprogs: List all libraries explicitlyFlorian Fainelli2016-09-081-0/+3
| | | | | | | e2fsprogs would fail linking with external toolchains which would not be able to find several dependencies, explicit them. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* e2fsprogs: Honor the global verbose flagFlorian Fainelli2016-09-081-0/+2
| | | | | | | Look for OPENWRT_VERBOSE and pass it down to the e2fsprogs entry-point Makefile. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* apm821xx: backport generic HDD led-triggers for WNDR4700 and MBLChristian Lamparter2016-09-084-0/+232
| | | | | | | This patch backports the new generic HDD/SDD led-trigger from 4.8-rc1. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: detect sd-card media changes for the WNDR4700Christian Lamparter2016-09-082-1/+20
| | | | | | | | | The insertion or removal of the sd-card cannot be detected by the hardware itself. This is by design. To workaround this, for the WNDR4700 unload/load the dwc2 module in case the the special SD CARD GPIO line is low/high. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* cns3xxx: add GW2386 supportTim Harvey2016-09-081-0/+20
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* cns3xxx: add GW2394 SupportTim Harvey2016-09-081-1/+3
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* image.mk: Create a manifest file of installed packages as a build artifactPushpal Sidhu2016-09-081-0/+8
| | | | | | | | | | A few linux BSP's create a manifest file of installed packages for a given target in order to help them understand exactly what's on their images. Create one here as well as a build artifact since many users have an affinity to prune down on packages to save valuable flash space. Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* kernel: backport upstream overlayfs fixesRafał Miłecki2016-09-067-0/+749
| | | | | | | | | | | First two patches weren't marked for stable but are dependencies for laters ones. The rest of patches was marked for stable but most likely will be backported to 4.5+ only so we need to get them on our own. An important fix is eea2fb4851e9d ("ovl: proper cleanup of workdir") as it allows mounting overlayfs with dirty workdir, e.g. after power cut. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* target/toolchain: Fix toolchain packaging without package buildMicha Lenk2016-09-061-0/+1
| | | | | | | | | | | | If the toolchain is packaged for later use as external toolchain, the resulting tarball is created in $BIN_DIR. But without building all packages first that directory isn't created, hence 'make target/toolchain/compile' fails when trying to create the toolchain tarball with error "Cannot open: No such file or directory". To fix that the $BIN_DIR is created before using it. Signed-off-by: Micha Lenk <micha@lenk.info>
* dnsmasq: fix remove pidfile on shutdown regressionKevin Darbyshire-Bryant2016-09-061-0/+1
| | | | | | | | | | | | | | Regression introduced by 3481d0d dnsmasq: run as dedicated UID/GID dnsmasq is unable to remove its own pidfile as /var/run/dnsmasq is owned by root and now dnsmasq runs as dnsmasq:dnsmasq. Change directory ownership to match. dnsmasq initially starts as root, creates the pidfile, then drops to requested non-root user. Until this fix dnsmasq had insufficient privilege to remove its own pidfile. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* mwlwifi: Expose the IEEE 802.11w support to hostapdPetko Bordjukov2016-09-051-1/+1
| | | | | | | Add a dependency on DRIVER_11W_SUPPORT in order to enable the IEEE 802.11w functionality in hostapd. Signed-off-by: Petko Bordjukov <bordjukov@gmail.com>
* hostapd: fix typo and indentation in ap_sta_support.patchJohannes Römer2016-09-051-2/+2
| | | | Signed-off-by: Johannes Römer <jroemer@posteo.net>
* ath10k-ct: fix missing symbols if ath9k is not selectedAlexis Green2016-09-051-1/+1
| | | | | | Require kernel to compile with CONFIG_RELAY=y Signed-off-by: Alexis Green <alexis@cessp.it>
* mac80211: backport new register bitfield macrosFelix Fietkau2016-09-051-0/+145
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add a tx sequence number allocation fixFelix Fietkau2016-09-051-0/+107
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* apm821xx: add size check for initramfs kernel for the Meraki MR24Christian Lamparter2016-09-051-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | Russell Senior reported an issue with the MR24 initramfs kernels: > ## Booting kernel from Legacy Image at 00c10000 ... > Image Name: POWERPC LEDE Linux-4.4.19 > Created: 2016-08-31 11:57:05 UTC > Image Type: PowerPC Linux Kernel Image (gzip compressed) > Data Size: 2155723 Bytes = 2.1 MiB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK >Wrong Ramdisk Image Format >Ramdisk image is corrupt or invalid For the MR24, the kernel is uploaded to 0x10000. The ramdisk starts at 0x200000. This leaves the kernel with just 0x1f0000 bytes = 1984kb. This patch adds a size check so the image creation script will abort instead of producing a unbootable initramfs image. A separate patch "apm821xx: Fix initramfs image for the Meraki MR24" which fixed the reported issue was submitted earlier. Cc: Russell Senior <russell@personaltelco.net> Cc: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: Fix initramfs image for the Meraki MR24riptidewave932016-09-051-1/+1
| | | | | | | When gzip is used, our kernel is too large and this causes the ramdisk to be at the wrong offset. Fix by moving to lzma. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* dropbear: mdns flag is a bool, not integerKarl Palsson2016-09-051-1/+1
| | | | | | Effectively the same for most purposes, but more accurate. Signed-off-by: Karl Palsson <karlp@etactica.com>
* base-files: support oneshot leds properly.Karl Palsson2016-09-051-1/+1
| | | | | | | | | | oneshot trigger configurations for LEDs are created, but the on/off timing configurations are ignored. generate_config is correctly creating oneshot configs, but the later led script doesn't recognise the trigger details. Fixes: c0c3f2d4c917 leds: support oneshot as well as timer triggers Signed-off-by: Karl Palsson <karlp@etactica.com>
* fstools: fix logic bug in extroot verification codeJohn Crispin2016-09-051-2/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ugps: update to latest git HEADJohn Crispin2016-09-051-2/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* zram-swap: CONFIG_PROCD_ZRAM_TMPFS compatibilityConn O'Griofa2016-09-051-2/+11
| | | | | | | | Enable CONFIG_PROCD_ZRAM_TMPFS compatibility via two changes to list_cpu_idx(): * detect if /tmp is being used by /dev/zram0; if yes, offset initial value by 1 to skip first zram device. * hot-add /dev/zram1, if not already present. Signed-off-by: Conn O'Griofa >connogriofa@gmail.com>
* imx6: enable ARM crypto accelerationKoen Vandeputte2016-09-041-0/+19
|
* imx6: refresh kernel configKoen Vandeputte2016-09-041-7/+0
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 12:30:33 +0000