aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: DIR-860L-B1 fix switch port numberingThibaut VARENE2017-07-251-1/+4
| | | | | | | | Luci shows switch ports in inverted order on that device. This patch fixes switch port numbering and matches them to the device silkscreen. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* kernel: netfilter: fix nf-nathelper(-extra) descriptionUwe Arnold2017-07-251-2/+2
| | | | | | | | | The tftp and irc netfilter modules are provided by nf-nathelper-extra and not by nf-nathelper. Signed-off-by: Uwe Arnold <donvipre@gmail.com> [move the irc module as well] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix wps button gpio for DWR-512Giuseppe Lippolis2017-07-251-1/+1
| | | | | | The WPS button is at GPIO#7. Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
* ramips: DTS: VoCore2 improvements/fixesPaul Wassi2017-07-251-22/+3
| | | | | | | | | | | The VoCore2 features 128MB of RAM, therefore set memory in DTS to 128*1024*1024 = 0x8000000 The board's LED is connected to GND, set it to ACTIVE_HIGH here. Make serial console working again on kernel 4.9 by change of pinmux configuration. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ar71xx: fix switch port mapping for TP-Link TL-WR74xN/D seriesPiotr Dymacz2017-07-231-1/+1
| | | | | | | | | Backport of ad8c315: "ar71xx: fix switch port mapping for TP-Link TL-WR74xN/D series". Fixes FS#843 Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for ALFA Network AP121FPiotr Dymacz2017-07-231-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for ALFA Network AP121FPiotr Dymacz2017-07-2313-0/+143
| | | | | | | | | | | | | | | | | | | | | | | | | | | ALFA Network AP121F is a pocket-size router dedicated for VPN/TOR users. Device is based on Atheros AR9331 WiSoC and is running a custom version (updated from OpenWrt CC to LEDE 17.01 release) of NetAidKit firmware. Specification: - 400/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR1) - 16 MB of FLASH (SPI NOR) - 1x 10/100 Mbps Ethernet - 1T1R 2.4 GHz - 1x microSD (optional, on separate PCB) - 3x LED, 1x button, 1x switch - UART header on PCB Flash instruction (under U-Boot web recovery mode): 1. Configure PC with static IP 192.168.1.2/24. 2. Connect PC with RJ45 port, press the reset button, power up device, wait for first blink of all LEDs (indicates network setup), then keep button for 3 following blinks and release it. 3. Open 192.168.1.1 address in your browser and upload sysupgrade image. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* image: fix ar71xx legacy imagesMathias Kresin2017-07-141-0/+1
| | | | | | | | | | | | | | | | | | If TARGET_PER_DEVICE_ROOTFS and DEVICE_PACKAGES are used for ar71xx legacy images: - an already jffs2 padded squashfs rootfs is overwritten with an unpadded/raw one. - the squashfs-raw and squashfs-64k rootfs are not replaced by the ones including the DEVICE_PACKAGES Call Image/Build/squashfs after the DEVICE_PACKAGES are added to the base squashfs rootfs to fix the issues. Fixes: FS#904 Signed-off-by: Mathias Kresin <dev@kresin.me>
* imx6: fix DualLite/Solo GW551X board detectionMathias Kresin2017-07-141-1/+1
| | | | | | The model name is a different one in the device tree source file. Signed-off-by: Mathias Kresin <dev@kresin.me>
* procd: backport kernel watchdog start/stop supportHans Dedecker2017-07-131-3/+3
| | | | | | 4dbf57a watchdog: add support for starting/stopping kernel watchdog Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* x86: add missing kernel config symbols to Geode targetJo-Philipp Wich2017-07-131-0/+2
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* x86: enable ACPI support for the Geode subtargetJo-Philipp Wich2017-07-121-3/+60
| | | | | | | | Backport of 9b940fe "x86: enable ACPI support for the Geode subtarget". Fixes FS#577. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* dnsmasq: backport patch fixing DNS failover (FS#841)Hans Dedecker2017-07-121-0/+31
| | | | | | | Backport upstream dnsmasq patch fixing DNS failover when first servers returns REFUSED in strict mode; fixes issue FS#841. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ar71xx: set US region code for TP-Link TL-WR710N v1 imageMatthias Schiffer2017-07-121-0/+1
| | | | | | | Non-US versions of the TP-Link TL-WR710N v1 don't have a region code so far, so we can just set US unconditionally. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* fstools: backport fixes from master branchDaniel Golle2017-07-112-60/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following changes are backported from the master branch bdcb075 libfstools: fix matching device name (f038a61 on master) ef2d438 fstools: use -Wno-format-truncation instead of -Wno-error=format-truncation (c43ae11 on master) d361923 build: disable the format-truncation warning error to fix gcc 7 build errors (a19f2b3 on master) cddc830 libfstools: silence mkfs.{ext4,f2fs} (88d48d5 on master) be5004c libfstools: add basic documentation of mount functions (92b4c2c on master) 34d36c2 add missing includes (7d78836 on master) A previously added hotfix was replaced by a git commit, hence the patch file is removed and we got instead 45c2a6f libfstools: fix multiple volume_identify usages with the same volume (633a8d0 on master) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mtd-utils: use source package name for lzo in PKG_BUILD_DEPENDSMatthias Schiffer2017-07-081-1/+1
| | | | | | PKG_BUILD_DEPENDS should always refer to source package names. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ramips: fix Xiaomi MiWiFi Nano firmware partition sizeMathias Kresin2017-07-081-1/+1
| | | | | | | | | | Even the commit message of the patch adding support for the MiWiFi Nano says that a 16 MB flash chip is used. Extend the firmware partition to make use of all available flash space. Fixes: FS#622 Signed-off-by: Mathias Kresin <dev@kresin.me>
* build: fix kmod package build on non-GNU systemsFelix Fietkau2017-07-051-1/+1
| | | | | | | BSD paste requires a filename argument, and it accepts - to use stdin as intended. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: Fix UBIFS work on Mikrotik RB95x devicesSergey Sergeev2017-07-051-0/+2
| | | | | | | | If nand chip has no NAND_NO_SUBPAGE_WRITE flag on its options ubifs can't use it mtd devices and the kernel crashes with error: __nand_correct_data: uncorrectable ECC error Signed-off-by: Sergey Sergeev <adron@yapic.net>
* lantiq: use img file extension for DGN3500 factory imagesMathias Kresin2017-07-041-5/+5
| | | | | | | | The Netgear UI in basic mode refuses the upgrade file if the the fileextension is not img. The expert/advanced mode accepts any fileextension. Use img to make it work in any case. Signed-off-by: Mathias Kresin <dev@kresin.me>
* dnsmasq: backport tweak ICMP ping logic for DHCPv4Hans Dedecker2017-07-012-1/+26
| | | | | | | | | | Don't start ping-check of address in DHCP discover if there already exists a lease for the address. It has been reported under some circumstances android and netbooted windows devices can reply to ICMP pings if they have a lease and thus block the allocation of the IP address the device already has during boot. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dhcpv6: add missing dollar sign in dhcpv6 script (FS#874)Hans Dedecker2017-06-292-2/+2
| | | | Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* procd: backport fixes from master branchDaniel Golle2017-06-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following commits have been cherry-picked into the lede-17.01 branch of procd, listed here in git-log-order ie. with head first: 89918c8 system: introduce new attribute board_name (79bbe6d and 453116e on master branch) 8297c38 preinit: define _GNU_SOURCE (e5b963a on master branch) 8fd57dd upgraded: cmake: Find and include uloop.h (e5ff8ca on master branch) 6b0da20 hotplug: fix a memory leak in handle_button_complete() (f367ec6 on master branch) 558ffb5 service/service_stopped(): fix a use-after-free (796ba3b on master branch) 22f89e1 upgraded: define __GNU_SOURCE (e7bb2c8 on master branch) 6e8ea8b rcS: add missing fcntl.h include (992b796 on master branch) cd5225d procd/rcS: Use /dev/null as stdin (d42b21e on master branch) 5131bec procd: Log initscript output prefixed with script name (1247db1 on master branch) 225b18d procd: Don't use syslog before its initialization (8d720b2 on master branch) 889442c procd: Add missing \n in debug message (2555474 on master branch) 2716228 procd: service gets deleted when its last instance is freed (8f218f5 on master branch) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: update kernel 4.4 to 4.4.74Stijn Tintel2017-06-2711-31/+31
| | | | | | | | Refresh patches. Compile-tested on ar71xx, octeon. Runtime-tested on ar71xx, octeon. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ipq806x: fixup thermal patchesStijn Tintel2017-06-273-249/+5
| | | | | | | Fix conflict with thermal patches added in c03d4317a6bc891cb4a5e89cbdd77f37c23aff86. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* base-files: fix PKG_CONFIG_DEPENDS to include version.mk entriesRafał Miłecki2017-06-261-1/+2
| | | | | | | | Including version.mk sets PKG_CONFIG_DEPENDS to config entries used for VERSION_SED command. We should keep these configs to make sure package gets refreshed when needed. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: include wpad-mini only on devices with (supported) wirelessRafał Miłecki2017-06-262-13/+15
| | | | | | | Don't include wpad-mini when it's useless just like we don't include useless wireless drivers. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* firmware-utils: fix dgn3500sum compiler warningsMathias Kresin2017-06-262-4/+3
| | | | | | | | | | | The sum variable need to be initialised, otherwise it will points to random stack memory and a bogus image checksum might be calculated. While at it, fix the segfault in case the product region code isn't specified and enable compiler warnings which had revealed all the code issues. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ca-certificates: Update to version 20161130+nmu1Christian Schoenebeck2017-06-261-3/+3
| | | | Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
* openvpn: update to 2.4.3Magnus Kroken2017-06-265-13/+14
| | | | | | | | | | | | | | | | | | | | Fixes for security and other issues. See security announcement for more details: https://community.openvpn.net/openvpn/wiki/VulnerabilitiesFixedInOpenVPN243 * Remotely-triggerable ASSERT() on malformed IPv6 packet (CVE-2017-7508) * Pre-authentication remote crash/information disclosure for clients (CVE-2017-7520) * Potential double-free in --x509-alt-username (CVE-2017-7521) * Remote-triggerable memory leaks (CVE-2017-7512) * Post-authentication remote DoS when using the --x509-track option (CVE-2017-7522) * Null-pointer dereference in establish_http_proxy_passthru() * Restrict --x509-alt-username extension types * Fix potential 1-byte overread in TCP option parsing * Fix mbedtls fingerprint calculation * openssl: fix overflow check for long --tls-cipher option * Ensure option array p[] is always NULL-terminated * Pass correct buffer size to GetModuleFileNameW() (Quarkslabs finding 5.6) Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* mbedtls: update to 2.5.1Magnus Kroken2017-06-262-27/+27
| | | | | | | | | | | | | | | Fixes some security issues (no remote exploits), and introduces some changes. See release notes for details: https://tls.mbed.org/tech-updates/releases/mbedtls-2.5.1-2.1.8-and-1.3.20-released * Fixes an unlimited overread of heap-based buffers in mbedtls_ssl_read() * Adds exponent blinding to RSA private operations * Wipes stack buffers in RSA private key operations (rsa_rsaes_pkcs1_v15_decrypt(), rsa_rsaes_oaep_decrypt()) * Removes SHA-1 and RIPEMD-160 from the default hash algorithms for certificate verification. * Fixes offset in FALLBACK_SCSV parsing that caused TLS server to fail to detect it sometimes. * Tighten parsing of RSA PKCS#1 v1.5 signatures, to avoid a potential Bleichenbacher/BERserk-style attack. Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* bcm53xx: enable Northstar thermal driverRafał Miłecki2017-06-221-0/+5
| | | | | | | It allows monitoring CPU temp and will shutdown system on critical value. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport Broadcom thermal driversRafał Miłecki2017-06-225-0/+801
| | | | | | This includes driver for Northstar and for Raspberry Pi. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* Revert "dnsmasq: don't point --resolv-file to default location unconditionally"Hans Dedecker2017-06-191-3/+3
| | | | | | | | | | This reverts commit 78edfff5303533dc52a1ac64ad745acc0a8a743e. This breaks local dns resolving in case noresolv=1 as resolv.conf is not populated anymore with 127.0.0.1 as resolvfile does not equal /tmp/resolv.conf.auto anymore. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dropbear: fix service trigger syntax errorKevin Darbyshire-Bryant2017-06-172-2/+2
| | | | | | The classic single '&' when double '&&' conditional was meant. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* ramips: fix Phicomm K1S(PSG1208) pinmux小桥2017-06-121-1/+1
| | | | | | Use gpio function for pins with LEDs. Signed-off-by: 小桥 <29551030@qq.com>
* LEDE v17.01.2: revert to branch defaultsAlexander Couzens2017-06-105-11/+9
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* LEDE v17.01.2: adjust config defaultsv17.01.2Alexander Couzens2017-06-105-9/+11
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* build: ensure that flock is available for make downloadFelix Fietkau2017-06-081-1/+1
| | | | | | | It ensures that make download can parallelize downloads, even when some packages download the same files (e.g. gcc/initial, gcc/final) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* include/toplevel: set env GIT_ASKPASS=/bin/trueAlexander Couzens2017-06-081-0/+1
| | | | | | | | When git-https request a service (e.g. github) which ask for credentials git will pass this request to the user resulting download.pl to wait for user input. Set GIT_ASKPASS to stop asking. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* base-files: network.sh: fix a number of IPv6 logic flawsJo-Philipp Wich2017-06-081-17/+48
| | | | | | | | | | | | | | | | | | | | | | * Change network_get_subnet6() to sensibly guess a suitable prefix Attempt to return the first non-linklocal, non-ula range, then attempt to return the first non-linklocal range and finally fall back to the previous behaviour of simply returning the first found item. * Fix network_get_ipaddrs_all() Instead of replicating the flawed logic appending a fixed ":1" suffix to IPv6 addresses, rely on network_get_ipaddrs() and network_get_ipaddrs6() to build a single list of all interface addresses. * Fix network_get_subnets6() Instead of replicating the flawed logic appending a fixed ":1" suffix to IPv6 addresses, rely on the ipv6-prefix-assignment.local-address field to figure out the proper network address. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mwlwifi: update to version 10.3.4.0 / 2017-06-06Jo-Philipp Wich2017-06-081-3/+3
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* automake: import upstream fix for perl 5.26Daniel Golle2017-06-081-0/+30
| | | | | | | | Build broke as distributions now include Perl 5.26 and automake triggered an "Unescaped left brace in regex" error. Import upstream commit 13f00eb449 to fix that. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: network.sh: properly report local IPv6 addressesJo-Philipp Wich2017-06-082-18/+14
| | | | | | | | | | Rework the network_get_ipaddr6() and network_get_ipaddrs6() functions to fetch the effective local IPv6 address of delegated prefix from the "local-address" field instead of naively hardcoding ":1" as static suffix. Fixes FS#829. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: update kernel 4.4 to 4.4.71Jo-Philipp Wich2017-06-073-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following security vulnerabilities: CVE-2017-8890 The inet_csk_clone_lock function in net/ipv4/inet_connection_sock.c in the Linux kernel through 4.10.15 allows attackers to cause a denial of service (double free) or possibly have unspecified other impact by leveraging use of the accept system call. CVE-2017-9074 The IPv6 fragmentation implementation in the Linux kernel through 4.11.1 does not consider that the nexthdr field may be associated with an invalid option, which allows local users to cause a denial of service (out-of-bounds read and BUG) or possibly have unspecified other impact via crafted socket and send system calls. CVE-2017-9075 The sctp_v6_create_accept_sk function in net/sctp/ipv6.c in the Linux kernel through 4.11.1 mishandles inheritance, which allows local users to cause a denial of service or possibly have unspecified other impact via crafted system calls, a related issue to CVE-2017-8890. CVE-2017-9076 The dccp_v6_request_recv_sock function in net/dccp/ipv6.c in the Linux kernel through 4.11.1 mishandles inheritance, which allows local users to cause a denial of service or possibly have unspecified other impact via crafted system calls, a related issue to CVE-2017-8890. CVE-2017-9077 The tcp_v6_syn_recv_sock function in net/ipv6/tcp_ipv6.c in the Linux kernel through 4.11.1 mishandles inheritance, which allows local users to cause a denial of service or possibly have unspecified other impact via crafted system calls, a related issue to CVE-2017-8890. CVE-2017-9242 The __ip6_append_data function in net/ipv6/ip6_output.c in the Linux kernel through 4.11.3 is too late in checking whether an overwrite of an skb data structure may occur, which allows local users to cause a denial of service (system crash) via crafted system calls. Ref: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2017-8890 Ref: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2017-9074 Ref: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2017-9075 Ref: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2017-9076 Ref: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2017-9077 Ref: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2017-9242 Ref: https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.4.71 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Add missing APU1 reference to x86 board.dKristian Evensen2017-06-062-2/+2
| | | | | | | | | | | | x86 board.d only contains a case for the APU2, not the APU1. This causes, for example, network configuration not to be created correctly. Even though the APU1 seems to reaching EOL, there a still a lot of them out there. The APU1 and APU2 is configured in the same way and this patch should also be considered for stable, as the error also exists there. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
* base-files: always set proto passed to _ucidef_set_interface()Mathias Kresin2017-06-031-1/+1
| | | | | | | | | | | | | | | Overwrite an already set proto if a new one is passed to _ucidef_set_interface() similar to what is done for the interface. It is required when using ""ucidef_set_interface_wan 'ptm0' 'pppoe'" after some initial wan interface configuration is already done by ucidef_add_switch. The "json_is_a protocol string" guard is meant to not reset an earlier set interface proto in case something like "ucidef_set_interface_lan 'eth0'" is used afterwards. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix broadcasts and vlans in two iface modeMathias Kresin2017-06-031-5/+6
| | | | | | | | | | | | | | | | | The two phy operation mode where one phy is assigned to an interface without lantiq,* device tree property and the other phy is assigned to an interface with the lantiq,wan device property was broken with the multicast package leaks between vlans fixes. Move the multicast packages relevant portmap settings to the condition which handles multicast packages for better readability. Replace the priv->port_map based port_map only for the interface which has the lantiq,switch device tree property set, to allow tagged multicast packages in two phy mode where the lantiq,switch device tree property isn't used. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: select kmod-mt7603 instead of kmod-mt76 for WBMR-300HPDFelix Fietkau2017-06-031-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: use the P2812HNUF* wan port as wanMathias Kresin2017-06-031-1/+1
| | | | | | | The port is labeled as wan and was only used as lan port because of the "tx ring full" issues fixed with 8f02f7c. Signed-off-by: Mathias Kresin <dev@kresin.me>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 15:52:09 +0000