aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: PowerCloud CR3000 OpenWrt configurationFelix Fietkau2015-12-196-1/+24
| | | | | | | | | | | | OpenWRt configuration part of support for the PowerCloud Systems CR3000. The CR3000 is a 802.11n 2.4 GHz wireless router with 8MB flash, 64MB RAM, a four port gigabit ethernet switch, and a fast ethernet wan port that was sold by PowerCloud Systems as hardware for the Skydog cloud-managed router service. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> SVN-Revision: 47945
* ar71xx: PowerCloud CAP324 OpenWrt configurationFelix Fietkau2015-12-196-0/+18
| | | | | | | | | | | | | | | Openwrt configuration part of support for PowerCloud CAP324 Cloud AP. The CAP324 Cloud AP is a device sold by PowerCloud Systems who's stock firmware (CloudCommand) provides 'cloud' based managment of large numbers access points. The CAP324 is a dual-band 802.11n wireless access point with 16MB flash and 128MB RAM and single gigabit ethernet port. It can be powered via PoE or a wall wart. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> SVN-Revision: 47944
* ar71xx: Image generation for PowerCloud CR5000 Cloud RouterFelix Fietkau2015-12-192-0/+36
| | | | | | | | | | | | Kernel part of support for the PowerCloud Systems CR5000. The CR5000 is a dual-band 802.11n wireless router with 8MB flash, 64 MB RAM, (unused in stock firmware) USB 2.0 port, and five port gigabit ethernet switch. The CR5000 was sold as hardware for the Skydog cloud-managed router service. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> SVN-Revision: 47943
* ar71xx: Image generation for PowerCloud CR3000 Cloud RouterFelix Fietkau2015-12-192-2/+36
| | | | | | | | | | | | Image generation part of support for PowerCloud CR3000. The CR3000 is a 802.11n 2.4 GHz wireless router with 8MB flash, 64MB RAM, a four port fast ethernet switch, and a fast ethernet wan port which was sold by PowerCloud Systems as hardware for the Skydog cloud-managed router service. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> SVN-Revision: 47942
* ar71xx: PowerCloud CAP324 image generationFelix Fietkau2015-12-192-0/+38
| | | | | | | | | | | | | | | Image generation (and mtd partition) part of support for PowerCloud CAP324 Cloud AP. The CAP324 Cloud AP is a device sold by PowerCloud Systems who's stock firmware (CloudCommand) provides 'cloud' based managment of large numbers of access points. The CAP324 is a dual-band 802.11n wireless access point with 16MB flash and 128MB RAM and single gigabit ethernet port. It can be powered via PoE or a power adaptor. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> SVN-Revision: 47941
* ar71xx: Kernel board definition for PowerCloud CR5000Felix Fietkau2015-12-197-0/+192
| | | | | | | | | | | | Kernel part of support for the PowerCloud Systems CR5000. The CR5000 is a dual-band 802.11n wireless router with 8MB flash, 64 MB RAM, (unused in stock firmware) USB 2.0 port, and five port gigabit ethernet switch. The CR5000 was sold as hardware for the Skydog cloud-managed router service. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> SVN-Revision: 47940
* ar71xx: Kernel board definition for PowerCloud CR3000Felix Fietkau2015-12-197-0/+176
| | | | | | | | | | | | Kernel part of support for PowerCloud CR3000. The CR3000 is a 802.11n 2.4 GHz wireless router with 8MB flash, 64MB RAM, a four port fast ethernet switch, and a fast ethernet wan port which was sold by PowerCloud Systems as hardware for the Skydog cloud-managed router service. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> SVN-Revision: 47939
* ar71xx: Kernel board definition for PowerCloud CAP324Felix Fietkau2015-12-197-0/+148
| | | | | | | | | | | | | | | Kernel part of support for PowerCloud CAP324 Cloud AP. The CAP324 Cloud AP was a device sold by PowerCloud Systems as hardware for the CloudCommand service for 'cloud' based managment of large numbers access points. The CAP324 is a dual-band 802.11n wireless access point with 16MB flash and 128MB RAM and single gigabit ethernet port. It can be powered via PoE or a power adaptor. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> SVN-Revision: 47938
* image.mk: use cross toolchain cpp for processing dts file instead of relying ↵Felix Fietkau2015-12-191-1/+1
| | | | | | | | on the host compiler Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47937
* ramips: disable NAND device in mt7621.dtsi to fix boot errors on many devicesFelix Fietkau2015-12-193-12/+4
| | | | | | | | Enable it from .dts files that need it, also remove redundant properties Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47936
* ramips: update DTS files to use jedec,spi-nor compatible string for m25p80 ↵Felix Fietkau2015-12-1894-94/+94
| | | | | | | | to fix probe issues Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47935
* ltq-vdsl-app: enable Annex-M support, disable unsupported Annex-A modesFelix Fietkau2015-12-181-6/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47934
* ltq-vdsl-app: remove whitespace after -i, it prevents vdsl_cpe_control from ↵Felix Fietkau2015-12-181-1/+1
| | | | | | | | parsing the XTSE bits Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47933
* brcm47xx: fix switch config for devices with WAN port 0Rafał Miłecki2015-12-181-0/+14
| | | | | | | | | Commit r47866 dropped default values which were handling WAN interface at port 0. Fix it by handling 2 more cases on NVRAM values. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47932
* brcm47xx: update kernel 4.4 configRafał Miłecki2015-12-181-6/+18
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47931
* brcm47xx: add kernel 4.4 supportRafał Miłecki2015-12-1821-0/+2212
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47930
* ralink: update the mt7621 ethernet support patchJohn Crispin2015-12-171-19/+21
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47929
* network/services/lldpd: Fix missing dependency when using JSONJohn Crispin2015-12-171-0/+1
| | | | | | | | | Using the JSON output option depends on json library so add select json-c library when JSON output is selected. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> SVN-Revision: 47928
* ar71xx: add support for TRENDnet TEW-823DRUJohn Crispin2015-12-1713-3/+221
| | | | | | | | | | | | | | Add support for TRENDnet TEW-823DRU: - cpu: QCA9558 @720MHz - flash: 16MB - ram: 256MB - 4+1 RJ45 100/1000Mbps - wifi: QCA9558 (bgn) and QCA9880-BR4A (ac) - 1x USB 2.0 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 47927
* dante: update to 1.4.1John Crispin2015-12-174-536/+13
| | | | | | | | | | | | | | | - 1.4.x has IPv6 support - set C std explicitly due to gcc 5 changes/old code style of dante - disable pam via configure vars since detection of without pam option is broken (-lpam gets linked in if available) - remove and refresh patches only compile tested Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 47926
* omap: add kernel 4.4John Crispin2015-12-171-0/+721
| | | | | | | | - tested on Beagleboard C4 Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 47925
* uboot-omap: update to 2015.10John Crispin2015-12-1712-332/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | - tested on Beagleboard C4 - remove upstream patches - disable THUMB mode on OMAP3 this increases binary size (remove CONFIG_SYS_THUMB_BUILD) - reduce SPL size by disabling EXT feature (remove CONFIG_SPL_EXT_SUPPORT) this fixes 2015.07 and 2015.10-rc3 Beagleboard C4 booting which were broken by upstream commit with id: bd2c4522c26d535515aebca52d27c004a7e0c05c Arm THUMB mode is broken because of an yet unknown errata see: http://lists.denx.de/pipermail/u-boot/2015-August/225793.html - backport upstream fix that was introduced in 2015.10-rc5 and was not fixed in 2015.10 final Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 47924
* kernel: kmod-ptp selects a new config symbolJohn Crispin2015-12-171-1/+3
| | | | | | | | | | | | since Kernel 3.14 408eccce net: ptp: move PTP classifier in its own file found while bug search thx olmari on IRC Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 47923
* brcm2708: update 4.1 patchesJohn Crispin2015-12-17213-390/+1950
| | | | | | | | | As usual, this patches were taken (and rebased) from https://github.com/raspberrypi/linux/commits/rpi-4.1.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 47922
* brcm2708-gpu-fw: update to latest versionJohn Crispin2015-12-171-3/+3
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 47921
* cns3xxx: add GW2393 SupportJohn Crispin2015-12-171-1/+3
| | | | | | | | | | | Based off of the GW2391-C, but with the following changes: * 4x4in to 4x5in pcb * flat panel connector for LED signals Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 47920
* cns3xxx: Fix commentJohn Crispin2015-12-171-1/+1
| | | | | | | | Original comment was wrong about which pads are being set. Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 47919
* lantiq: fix ARV7519RW22 buttonsJohn Crispin2015-12-171-7/+7
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 47918
* lantiq: ltq-ptm: set carrier statusJohn Crispin2015-12-172-0/+27
| | | | | | | | | | | | | | | | | | | Principal purpose is to prevent the error message ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime which is printed at least once per second to the serial console, if the ptm interface is not in showtime, but a processes already sends packages over that interface. This happens for adsl as well as vdsl over ptm. It's pppd which sends packages over the ptm device before in showtime. As far as I can see, pppd is started unconditionally since netif can not gather the link status of the ptm network interface. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 47917
* lantiq: ltq-atm: set carrier statusJohn Crispin2015-12-171-1/+14
| | | | | | | | | | | | | | This prevents the unconditionally start of pppd since netifd will be triggered if the device goes into showtime. The same applies to lost showtime as well. In compare to the ptm driver, this changeset isn't strictly required, since the "not in showtime" message is limited to the debug loglevel. But it reduces the amount of ppp related messages significant. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 47916
* lantiq: add the TDW8980 5GHz ledJohn Crispin2015-12-171-0/+7
| | | | | | | | | Still unused, but u-boot doesn't take care of the led, which results in a permanent switched on 5GHz LED. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 47915
* lantiq: Fix LED handling.John Crispin2015-12-171-24/+32
| | | | | | | | | | - Use common OpenWrt blink patterns instead of custom ones - Add preinit_regular hook - Handle the TDW89X0 that does not have a configurable power LED Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 47914
* lantiq: Configure LED polarity for TDW8970.John Crispin2015-12-171-0/+4
| | | | | | | | This patch configures the correct ath9k WLAN LED polarity for the TDW8970. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 47913
* lantiq: Configure disabled WLAN bands for TDW89X0.John Crispin2015-12-171-0/+1
| | | | | | | | | | | | | | | | | The TDW8970 has a AR9381, which is the bgn 3x3:3 variant of the AR938x family. The TDW8980 has a AR9287, which is the bgn 2x2:2 variant of the AR928x family. This means that the chip for both routers is 2.4 GHz only. Anyway, the manufacturer didn't disable the 5 GHz band in the EEPROM partition (at least on my TDW8970). So this patch disables the 5 GHz band. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 47912
* lantiq: Allow configuration of ath9k disabled bands and LED polarity from ↵John Crispin2015-12-171-1/+17
| | | | | | | | the device tree. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 47911
* ath9k: Allow configuration of LED polarity in platform data.John Crispin2015-12-173-3/+24
| | | | | | Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 47910
* ath9k: Pass LED polarity to ath_create_gpio_led when initializing the LEDs.John Crispin2015-12-172-2/+2
| | | | | | Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 47909
* ramips: mt7621: fix error message when initramfs is too largeJohn Crispin2015-12-171-1/+1
| | | | | | Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> SVN-Revision: 47908
* ramips: remove unwanted change from patchJohn Crispin2015-12-171-11/+0
| | | | | | | | Remove unwanted change to irq-mips-gic.c from mt7621 support patch Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> SVN-Revision: 47907
* ramips: change CM_GCR_BASE_CMDEFTGT_MEM value to match datasheetJohn Crispin2015-12-171-0/+12
| | | | | | | | | | Zero config value for default memory region means 'memory', not not 'disabled' according to 'Control Registers Of The Coherency Manager' manual. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> SVN-Revision: 47906
* ramips: mt7621: undo mips-cm probe hack to not wipe out memory regionsJohn Crispin2015-12-171-0/+20
| | | | | | | | | | Since now we hopefully setup memory regions properly we no longer need this hack. Tested and works on ubnt-erx. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> SVN-Revision: 47905
* ramips: mt7621: setup memory region for pcie controller memoryJohn Crispin2015-12-171-0/+42
| | | | | | | | | Only compile tested since I do not have any hardware with devices on pcie bus. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> SVN-Revision: 47904
* ramips: mt7621: add patch to setup CM memory region for palmbusJohn Crispin2015-12-171-0/+36
| | | | | | | | This is tested and works on ubnt-erx. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> SVN-Revision: 47903
* ralink: update config files to build the cleaned up ethernet driverJohn Crispin2015-12-177-28/+37
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47902
* ralink: drop dummy profile from mt7688John Crispin2015-12-172-14/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47901
* ralink: fixup devicetree files to work with new ethernet driverJohn Crispin2015-12-17139-176/+190
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47900
* ralink: drop old ethernet driverJohn Crispin2015-12-1721-6842/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47899
* ralink: add reworked ethernet driverJohn Crispin2015-12-1717-24/+7877
| | | | | | | | update to the version of the driver that is on its way upstream Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47898
* netifd: update to the latest version, fixes more route table issuesFelix Fietkau2015-12-161-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47897
* bcm53xx: print bcm47xxpart buf to debug R8000 UBI problemRafał Miłecki2015-12-161-0/+40
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47896
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 15:52:02 +0000