aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* odhcpd: update to version 2017-04-21Hans Dedecker2017-05-021-3/+3
| | | | | | | 570069d ubus: rework dumping IPv6 and IPv4 leases 4e579c4 dhcpv6-ia: simplify logic to write statefile and dhcpv6 logging Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* build: fix symlinked .config handlingSergey Ryazanov2017-05-021-1/+1
| | | | | | | | | | | | | | | | | | When running "make menuconfig" with symlinked .config (e.g. to env/.config) it renames symlink to .config.old, creates new .config file and writes updated configuration here. This breaks the desired workflow when changes in the configuration could be checked using "scripts/env diff" and commited with "scripts/env save". Since the env/.config file is not updated. Fix this issue by exporting KCONFIG_OVERWRITECONFIG=1, which forces mconf to overwrite the .config content, instead of renaming it and creating a new file. This variable is set only if .config is a symlink, otherwise the variable is not exported and the old behaviour is preserved. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* ramips: WN3000RPv3: do not setup switchThibaut VARENE2017-04-281-1/+0
| | | | | | | | | The WN3000RPv3 is a repeater with a single ethernet port. Setting up the switch, even to disable it, is unnecessary and possibly confusing. Configure LAN as eth0 instead. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* brcm63xx: Add Observa VH4032N supportDaniel Gonzalez Cabanelas2017-04-287-0/+193
| | | | | | | | | | | | | Add support for the Observa Telecom VH4032N router. This is another BCM6368 router, 128 MB RAM, 32MB flash and 3 USB host ports. The wifi chip is an onboard Broadcom BCM43222. Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com> [jonas.gorski: use gpio-hog instead of abusing ephy-reset] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* cns3xxx: use proper macro's for ID handlingKoen Vandeputte2017-04-281-3/+3
| | | | | | Compiled & tested on cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: add support for Sanlinking D240Kristian Evensen2017-04-287-0/+175
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Sanlinking Technologies D240 (http://www.sanlinking.com/en/29-dual-4g-wifi-router.html) is basically the same device as the ZBT WE826, so adding support for it in LEDE is straight forward. The differences is that the D240 has two mini-PCIe slots (instead of one), blue LEDs and supports PoE. Specification: * CPU: MT7620A * 1x 10/100Mbps POE (802.3af/802.3at) Ethernet, 4x 10/100Mbps. * 16 MB Flash. * 128 MB RAM. * 1x USB 2.0 port. * 2x mini-PCIe slots. * 2x SIM slots. * 1x 2.4Ghz WIFI. * 1x button. Wifi, USB, switch and both mini-PCIe slots are working. I have not been able to test the SD card reader. The device comes pre-installed with an older version of OpenWRT, including Luci. In order to install LEDE, you need to follow the existing procedure for updating OpenWRT/LEDE using Luci. I.e., you need to access the UI and update the firmware using the sysupgrade-image. Remember to select that you do not want to keep existing settings. The default router address is 192.168.10.1 and username/password admin/root (at least on my devices). If you brick the device, the procedure for recovery is the same as for the WE826. Please see the wiki page for that device for instructions. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
* ar71xx: select ATH79_NVRAM only by boards actually use itPiotr Dymacz2017-04-281-4/+5
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ramips: fix Sercomm NA930 compatible stringMathias Kresin2017-04-281-1/+1
| | | | | | | The Sercomm NA930 is not a mt7620a evaluation board and shouldn't use the eval board compatible string. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: remove Planex CS-QR10 sound device tree nodeMathias Kresin2017-04-281-11/+0
| | | | | | | | The comptible string is neither added by any LEDE patch nor exists in in the kernel. Drop the sound node which was obviously added accidentally with 9195d8da ("ramips: DTS rework"). Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: cleanup SPI flash device tree properties usageMathias Kresin2017-04-28110-116/+6
| | | | | | | | | Use only the jedec,spi-nor compatible string. Everything else either never worked or is only support to keep compatibility. Remove the linux,modalias property. It is obsolete since kernel 4.4. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: remove DT pcie nodes for GL-MT300A/NFelix Fietkau2017-04-282-26/+0
| | | | | | These devices don't have a secondary wifi chip Signed-off-by: Felix Fietkau <nbd@nbd.name>
* rpcd: Explicitly link with lcryptFlorian Fainelli2017-04-281-0/+2
| | | | | | | | | | | Fixes build issues with some toolchains that don't add lcrypt in the default search paths: CMakeFiles/rpcd.dir/session.c.o: In function `rpc_login_test_password': build_dir/target-mipsel-linux-gnu/rpcd-2016-12-03-0577cfc1/session.c:823: undefined reference to `crypt' collect2: error: ld returned 1 exit status Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* ramips: ZyXEL Keenetic Omni/Omni2: export gpio usb powerVitaly Chekryzhev2017-04-282-0/+22
| | | | | | Export gpio usb to allow power management of USB port. Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
* ramips: ZyXEL Keenetic Viva: align factory imagesVitaly Chekryzhev2017-04-281-1/+1
| | | | | | ZyXEL web-flasher requires squashfs to be aligned to 64kb. Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
* ramips: ZyXEL Keenetic Viva: export gpio usb powerVitaly Chekryzhev2017-04-281-0/+11
| | | | | | Export gpio usb to allow power management of USB port. Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
* ramips: add ip17xx support to WLI-TX4-AG300NYo Abe2017-04-281-0/+1
| | | | | | | | | ramips/rt288x WLI-TX4-AG300N was missing support for its 100Mbit switch which should be included by default. Signed-off-by: Yo Abe <abe.geel@gmail.com> [Jo-Philipp Wich: picked from OpenWrt PR#359, rewrap commit msg, fix Sob] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: fix EX2700 wireless macJoseph C. Lehner2017-04-281-13/+11
| | | | | | | | On some EX2700 devices, the MAC address from the eeprom data differs from the actual MAC address. Fix that, and cleanup the DTS file while we're at it. Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
* ramips: ZyXEL Keenetic series update wan macVitaly Chekryzhev2017-04-281-1/+3
| | | | Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
* ramips: ZyXEL Keenetic Omni align factory imagesVitaly Chekryzhev2017-04-281-2/+2
| | | | | | ZyXEL web-flasher requires squashfs to be aligned to 64kb. Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
* ramips: correct keenetic-series switch indexVitaly Chekryzhev2017-04-281-1/+1
| | | | | | Fix switch name typo Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
* ramips: add support for Netgear WN3000RPv3Thibaut VARENE2017-04-287-2/+163
| | | | | | | | | | | | | | | | | | | | This patch adds support for the Netgear WN3000RPv3 http://www.netgear.com/support/product/wn3000rpv3.aspx Specifications: - SoC: MediaTek MT7620A (580MHz, ramips) - RAM: 32MB DDR - Storage: 8MB NOR SPI flash - Wireless: builtin MT7620A, 2x2:2 with u.FL connectors - Ethernet: 1x100M - Serial: JP1 header, 57600-8N1 - Stock firmware based on OpenWRT Kamikaze Like the EX2700, the bootloader expects a secondary image signature, see https://forum.openwrt.org/viewtopic.php?pid=312577#p312577 This is why the same fakeroot image is used for the WN3000 Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ramips: fix mac address of miwifi-miniBangLang Huang2017-04-282-1/+5
| | | | | | | For the miwifi-mini, the offset of ethernet mac should be 0x28 which you can easyily dump from 'Factory' partition. Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
* feeds: add option to force feed update despite modified filesJo-Philipp Wich2017-04-281-9/+26
| | | | | | | | Implement a new flag "-f" for the feeds update command which causes the script to fall back to a more agressive git update strategy in case there are locally modified files in the feeds directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: Clean duplicated status property for Omega2 WMAC in dtsiFurong Xu2017-04-281-4/+0
| | | | | | At the tail of dtsi, wmac is enabled twice, clean the first one Signed-off-by: Furong Xu <xfr@outlook.com>
* ramips: fixed sms led polarity into dwr-512 DTGiuseppe Lippolis2017-04-281-1/+1
| | | | Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
* ramips: WN3000RPv3: do not setup switchThibaut VARENE2017-04-281-0/+1
| | | | | | | | | The WN3000RPv3 is a repeater with a single ethernet port. Setting up the switch, even to disable it, is unnecessary and possibly confusing. Configure LAN as eth0 instead. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* busybox: revert accidential version bumpJo-Philipp Wich2017-04-271-1/+1
| | | | | | | | | Due to an oversight during patch conflict resolution, the PKG_VERSION got accidentially bumped instead of the PKG_RELEASE field. Revert the bad version change as there exists no upstream 1.25.2 version. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* busybox: nslookup_lede: mimic output format of old Busybox appletJo-Philipp Wich2017-04-272-22/+61
| | | | | | | | | | | | | When invoking "nslookup_lede" with a domain argument and without explicit query type, issue both A and AAAA queries and display the resulting IP addresses in a numbered list style, similar to how the old BusyBox nslookup used to output the records. This is required for compatibility with certain scripts. Ref: https://forum.lede-project.org/t/nslookup-ipv6-in-lede-17-01-1 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* busybox: nslookup_lede: fix compatibility with v1.25Jo-Philipp Wich2017-04-272-6/+7
| | | | | | | | | | | | | | The ":*" optstring syntax was only recently introduced with BusyBox v1.26, older versions need a corresponding hint in the "opt_complementary" variable to denote flag values that should be stored as llist entries. Add the required opt_complementary entry to fix random SIGBUS, SIGILL or SIGSEGV related crashes on BusyBox 1.25.x when attempting to use the "-q" flag of the "nslookup_lede" applet. Ref: https://forum.lede-project.org/t/nslookup-ipv6-in-lede-17-01-1 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* x86: enable 4G high memory support for generic (32bit) subtargetJo-Philipp Wich2017-04-272-3/+8
| | | | | | | | | This is required to fully support a number of 32bit x86 systems equipped with more than one GB ram, e.g. certain Atom CPU machines. Ref: https://forum.lede-project.org/t/17-01-1-x86-doesnt-detect-all-of-the-ram/3295 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* generic: keep module aliases inside .modinfoYousong Zhou2017-04-272-12/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems module aliases are actually essential info. E.g. other modules may call xt_request_find_match(NFPROTO_IPV{4,6}, "hashlimit", 1) and the kernel will request user mode modprobe helper for ipt_hashlimit and ip6t_hashlimit respectively which are aliases of xt_hashlimit.ko Compile-tested for armvirt, there is nearly no size impact. Before -rw-r--r-- 1 yousong yousong 304 Jan 10 17:37 config.seed -rw-r--r-- 1 yousong yousong 1634 Jan 11 11:07 lede-armvirt-default.manifest -rw-r--r-- 1 yousong yousong 1533647 Jan 11 11:07 lede-armvirt-default-rootfs.tar.gz -rw-r--r-- 1 yousong yousong 1802711 Jan 11 11:07 lede-armvirt-root.ext4.gz -rw-r--r-- 1 yousong yousong 1544597 Jan 11 11:07 lede-armvirt-rootfs.cpio.gz -rw-r--r-- 1 yousong yousong 1174984 Jan 11 11:07 lede-armvirt-root.squashfs.gz -rwxr-xr-x 1 yousong yousong 1654712 Jan 11 11:07 lede-armvirt-zImage -rwxr-xr-x 1 yousong yousong 2738296 Jan 11 11:07 lede-armvirt-zImage-initramfs drwxr-xr-x 2 yousong yousong 4096 Jan 10 17:35 packages -rw-r--r-- 1 yousong yousong 739 Jan 10 17:37 sha256sums After -rw-r--r-- 1 yousong yousong 304 Jan 10 17:37 config.seed -rw-r--r-- 1 yousong yousong 1634 Jan 11 11:10 lede-armvirt-default.manifest -rw-r--r-- 1 yousong yousong 1533646 Jan 11 11:10 lede-armvirt-default-rootfs.tar.gz -rw-r--r-- 1 yousong yousong 1802711 Jan 11 11:10 lede-armvirt-root.ext4.gz -rw-r--r-- 1 yousong yousong 1544593 Jan 11 11:10 lede-armvirt-rootfs.cpio.gz -rw-r--r-- 1 yousong yousong 1174984 Jan 11 11:10 lede-armvirt-root.squashfs.gz -rwxr-xr-x 1 yousong yousong 1654736 Jan 11 11:10 lede-armvirt-zImage -rwxr-xr-x 1 yousong yousong 2738144 Jan 11 11:10 lede-armvirt-zImage-initramfs drwxr-xr-x 2 yousong yousong 4096 Jan 10 17:35 packages -rw-r--r-- 1 yousong yousong 739 Jan 10 17:37 sha256sums Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ubox: bump to version 2017-03-10Yousong Zhou2017-04-271-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes FS#684 with commit 21a4bd0 Changes since current version. All changes except the ones prefixed with asterisks are for bugfixes. Module aliases awareness is expected by the kernel to be a basic facility and is required for properly initializing wireguard. 16f7e16 syslog: remove unnecessary sizeof struct between messages 21a4bd0 kmodloader: modprobe: return 0 for loaded modules 3dc78a4 kmodloader: don't store aliases info in struct module c553354 cmake: fix typo 8973576 kmodloader: fix not being able to find some modules fce9382 cmake: Check for getrandom system call ac2d43e kmodloader: support '-q' quiet option *f8d3d16 ubox: Add an option for more accurate timestamps in log 14839f0 kmodloader: make insert_module() idempotent *6e3c6dc kmodloader: add module alias awareness 9371411 kmodloader: fix out-of-bound access when parsing .modinfo a62c946 kmodloader: modprobe: skip possible command line arguments *46a4b5f kmodloader: log to kmsg when loading directories of modules eacc426 kmodloader: remove redundant glob wildcard char 8488bb5 ubox: Initialize conditionally uninitialized variabled db070f1 ubox: Fix some memory leaks acc48b5 kmodloader: Fix typo in error message Size comparison on x86_64 host function old new delta main 2190 2344 +154 scan_module_folder 665 793 +128 alloc_module_node - 113 +113 .rodata 946 1036 +90 alloc_module 202 245 +43 free_modules 77 119 +42 load_modprobe 209 237 +28 scan_loaded_modules 241 265 +24 avl_modcmp 45 67 +22 insert_module 204 224 +20 find_module 13 30 +17 static.optind@@GLIBC_2 - 4 +4 static.load_moddeps 118 117 -1 scan_module_folders 55 54 -1 ------------------------------------------------------------------------------ (add/remove: 2/0 grow/shrink: 10/2 up/down: 685/-2) Total: 683 bytes Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: use skb_cow_head() to deal with cloned skbsÁlvaro Fernández Rojas2017-04-237-0/+267
| | | | | | | | | | | We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes Ethernet<->WiFi bridge for Raspberry Pi and probably other devices. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ar71xx: fix minor syntax error in /lib/upgrade/platform.shMatthias Schiffer2017-04-221-1/+1
| | | | | | | Fix a '==' that should be a '=' in a test condition. Busybox fortunately doesn't care. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ramips: update DEVICE_PACKAGES for Ubiquiti EdgeRouter XMatthias Schiffer2017-04-221-1/+1
| | | | | | Fixes removal of unneeded kernel modules with per-device rootfs. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* openssl: Use mkhash for STAMP_CONFIGUREDFlorian Fainelli2017-04-221-1/+1
| | | | | | | | | | | | | The current way of creating a STAMP_CONFIGURED filename for OpenSSL can lead to an extremely long filename that makes touch unable to create it, and fail the build. Use mkhash to produce a hash against OPENSSL_OPTIONS which creates a shortert stamp file, Fixes #572 Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* busybox: fix build of nslookup_lede applet without IPv6 (#728)Jo-Philipp Wich2017-04-211-9/+33
| | | | | | | | | Protect any IPv6 related with appropriate guards to fix compilation with disabled IPv6 support in Busybox. Fixes #728. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* busybox: Move libresolv detection to LEDE MakefileFlorian Fainelli2017-04-212-18/+6
| | | | | | | | | | | Since the LEDE nslookup applet is already specific to LEDE, move the libresolv detection into the busybox Makefile that LEDE uses. This fixes builds with external toolchains that don't automatically search for headers and/or libraries without being told so. Fixes: de5b8e5d2fe1 ("busybox: add musl compatible nslookup replacement") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* bcm53xx: backport BCM5301X patchesRafał Miłecki2017-04-209-2/+975
| | | | | | | This fixes GIC interrupts (required before switching to 4.9), adds few new entires & introduces DTS for Archer C5. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: parepare for building more Linksys imagesRafał Miłecki2017-04-201-1/+16
| | | | | | We still can't enable them by default without proper TRX support. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: prepare for building Archer C5 V2 imageRafał Miłecki2017-04-201-0/+9
| | | | | | Don't enable it yet as kernel needs to be updated first. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ar71xx: add TP-LINK TL-WR841N/ND v12 imageVittorio Gambaletta2017-04-201-1/+7
| | | | | | | | | | | | | This router has the same hardware as TP-LINK TL-WR841N/ND v11 (same FCC ID, same TFTP image name...). If the stock firmware web interface doesn't accept LEDE factory image, it can be flashed via the U-Boot TFTP recovery mode, by long-pressing the reset button after power on. The TFTP image name is wr841nv11_tp_recovery.bin (yes, v11, not v12). Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
* utils/f2fs-tools: Update to 1.8.0Daniel Engberg2017-04-172-59/+7
| | | | | | | | | | Update f2fs-tools to 1.8.0 Refresh patches Remove selinux patch, use configure argument instead. Switch to xz tarball Adjust url to avoid redirects Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* busybox: add musl compatible nslookup replacementJo-Philipp Wich2017-04-153-0/+931
| | | | | | | | | | Add an alternative nslookup applet implementation which is compatible with musl libc wrt. name server selection and which supports a number of additional features such as query type selection. Fixes #155, #217 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: update kernel 4.4 to 4.4.61Jo-Philipp Wich2017-04-155-117/+9
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* odhcpd: update to version 2017-03-29 (FS#635)Hans Dedecker2017-04-131-3/+3
| | | | | | | | | | 3d9f406 rework IPv6 dns address selection (FS#635) bc6c3ac ndp: keep an exact copy of IPv6 interface addresses 6eb1e01 ndp: code cleanup eea7d03 rework IPv6 address dump logic 24d21c7 ndp: add syslog debug tracing Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcpd: update to version 2017-02-28Florian Fainelli2017-04-131-3/+3
| | | | | | | | Brings in the following change: 9eac2a896341 dhcpv6-ia: Check lockf return value Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* odhcpd: update to version 2017-02-21Hans Dedecker2017-04-131-3/+3
| | | | | | | | | | | | | | | | | | 1b630f8 router: don't announce prefixes with valid lifetime equal to 0 ba0cac0 router: fix arithmetic exception fault 3495f17 router: allow RA prefix lifetime being set to leasetime value (FS#397) e437ce9 treewide: simplify dhcp leasetime checking 942fb33 router: support ra_mininterval and ra_lifetime uci parameters (FS#397) f913337 router.h: fix alignment style 4dc7edb Revert "odhcpd.h: fix alignment style" 62ea54f odhcpd.h: fix alignment style a898ee5 config: make loglevel configurable via uci (FS#481) 51c756c odhcpd: display correct default log level in usage text 68ee0b5 treewide: define and use macro IN6_IS_ADDR_ULA fa57225 ndp: deregister netlink event socket for non recoverable errors ac70d28 odhcpd: fix white space errors Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ramips: add RP-N53 pcie wireless eepromMathias Kresin2017-04-121-0/+9
| | | | | | | | | | Fix the PCIe 5GHz wireless by using the on flash eeprom/caldata. Disable the 2.4GHz band as this band has no antennas attached but is enabled in the eeprom/caldata. Fixes: FS#691 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix WHR-600D eeprom dt propertyMathias Kresin2017-04-121-3/+3
| | | | | | | | | | | Fix the PCIe 5GHz wireless by using the ralink mtd-eeprom property as this board have a RT5592 and uses the rt2x00 driver. The mediathek device tree bindings do not work here. Fixes: FS#691 Fixes: d8dd207ea6f2 ("ramips: use the ralink,mtd-eeprom device tree property") Signed-off-by: Mathias Kresin <dev@kresin.me>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-08 00:56:45 +0000