aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: sync with master branch as of 9edff13abd97Felix Fietkau2017-02-24214-12942/+1799
| | | | | | | | | | | | | | | | Includes the following changes: 9edff13abd mac80211: disable potentially harmful PS software retry for A-MPDU sessions 75216a76b0 mac80211: backport upstream fix for CSA in IBSS mode 368cc8ef47 mac80211: update brcmfmac backporting brcmf_err cleanups 66a63d25c4 mac80211: fix build on linux 3.18 9eacb9d7fc rt2x00: mt7620: lots of improvements fd94fa61a7 mac80211: brcmfmac: update Raspberry Pi patches for linux 4.9 649e766a64 mac80211: update to wireless-testing 2017-01-31 47540afa5d ath9k: add a warning to the tx99 config option b367eef21d mac80211: rt2x00: add support for external LNA on MT7620 9200e168f2 mac80211: move (& update) upstream accepted brcmfmac patches Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: depend on kmod-hwmon-core, it gets used when CONFIG_THERMAL is setFelix Fietkau2017-02-241-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: fix kernel api compatibility issuesFelix Fietkau2017-02-242-0/+108
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: Fix performance of 2x2 hardware running 3x3 firmware.Ben Greear2017-02-241-3/+3
| | | | | | | The driver had a bug when calculating the rateset. This resolves that and allows full VHT mcs rates on 2x2 hardware. Signed-off-by: Ben Greear <greearb@candelatech.com>
* mt76: split kmod packageJoseph C. Lehner2017-02-231-13/+49
| | | | | | | | | | | | | | | | This patch splits `kmod-mt76` into three separate packages: `kmod-mt76-core`, `kmod-mt76x2` and `kmod-mt7603`. By making `kmod-mt76` a metapackage containing these new packages, the previous behaviour of including all drivers and firmware is left unchanged, unless explicitly unselected in `DEVICE_PACKAGES`. This splitting is especially beneficial for devices with small flash chips, since the `kmod-mt76` package currently requires ~160K on squashfs (after compression). Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
* lantiq: fix broadcast packets leaking on the wrong vlan on xrx200Felix Fietkau2017-02-231-5/+6
| | | | | | | | | | | | | | | The ethernet driver uses a port map override via special tag to control the ports on which multicast packets are sent. This was added to work around an issue in the switch that was occasionally leaking packets onto the wrong vlan. Unfortunately the change had some leftover lines that were overwrting the port map with a list of all ports, thus always leaking packets onto the wront vlan. Fix this by only enabling the override with the VLAN port map and only if a matching VLAN port map was actually found Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: move upstream accepted bcm47xxpart TRX cleanupsRafał Miłecki2017-02-222-3/+10
| | | | | | Use 0xx prefix for accepted patches. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport bcm47xxsflash support for reading 32 MiB flashesRafał Miłecki2017-02-222-0/+144
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* Revert "kernel: ar8327/ar8337: disable ARL access code to avoid lockups ↵Stijn Tintel2017-02-221-6/+0
| | | | | | | | | | | | (FS#384)" This reverts commit ec1a695daa7390a6c24e3b28d3956f194cba2cb5. Revert the workaround, the problem was properly fixed in 237454991618e0e8b7ceb8a8a2a43fca12c1a454. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 5c49fecf72c9c10b1d302b0a9d4db3b4ce3c782c)
* ar8216: flush ARL table during reset after init_globalsGünther Kelleter2017-02-221-0/+1
| | | | | | | | | | | | | | commit 33b72b8e0faf7a39faabece584fd6da61cd8f8df "ar8216: adjust ATU flushing in case of link changes" introduced portwise flushing on link down events. Now the ARL table could be in a chaotic state after boot where ar8xxx_sw_get_arl_table looped forever (depending on the entries collected while booting). Fixes FS#384. Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> (cherry picked from commit 237454991618e0e8b7ceb8a8a2a43fca12c1a454) Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* cmake: skip build system check on compileFelix Fietkau2017-02-211-0/+4
| | | | | | | | | | | | | cmake checks the build system and its variables on its own to detect if the makefiles need to be regenerated. Unfortunately this can invalidate overrides passed in the Build/Configure step. On non-Linux systems this breaks the build when switching between targets of the same package architecture. Fix this by forcibly disabling the build system check and relying on the LEDE build system to take care of these things Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dnsmasq: Add upstream patch fixing SERVFAIL issues with multiple serversBaptiste Jonglez2017-02-201-0/+130
| | | | | | This fixes FS#391 for lede-17.01 Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* kernel: update kernel 4.4 to version 4.4.50Jo-Philipp Wich2017-02-2014-90/+47
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "px5g-standalone: provide px5g via PROVIDES"Stijn Tintel2017-02-201-1/+0
| | | | | | | | | | | | | This reverts commit cc66f819b4e778732a32f08f5dc39a2554682b73. This commit causes opkg to install px5g-standalone instead of px5g when installing luci-ssl. As luci-ssl depends on mbedtls, using px5g-standalone makes no sense. Next to that, it creates deprecated SHA1 certificates. Revert the commit to avoid pxg5-standalone to be installed by accident. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit ca8aee0c570561fc59fb0d0e6b5eac418054c372)
* uboot-kirkwood: fix goflexhome/net bootcommandAlberto Bursi2017-02-191-1/+1
| | | | | | | | | | Goflexhome/net use uImage, and to boot an uImage the u-boot must use bootm command, not bootz. Fixes the "i cannot boot LEDE with this u-boot" issue that I found out myself with my goflexnet. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* ar71xx: Remove images for rb-941-2ndThibaut VARENE2017-02-191-2/+0
| | | | | | | | | | The code that generates this image is broken in many ways. The new code currently in master generates images that will not be compatible with the ones in 17.01. To avoid a migration nightmare, this patch removes image generation for this device in 17.01 Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* sdk: emit proper tag references for base URLsJo-Philipp Wich2017-02-191-3/+5
| | | | | | | | | Properly resolve symbolic tag names when constructing the base feed Git url and avoid emitting "HEAD" references when building from detached commits. Fixes #495, #501. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* lantiq: set the internet led interface according to wan interfaceMathias Kresin2017-02-181-0/+1
| | | | | | | | Use the nas0 interface for the netdev trigger as default. Use the ptm0 interface for xRX200 boards to match the default wan interface set in 02_network. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: introduce lantiq_is_vdsl_systemMathias Kresin2017-02-182-1/+5
| | | | | | | Move the code to check if the current system is a system with vdsl support to a dedicate function to make it reusable. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix ARV7519RW22 switch port indexingMathias Kresin2017-02-181-1/+1
| | | | | | Fixes FS#454. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uhttpd: use sha256 when generating certificates with openssl (FS#512)Felix Fietkau2017-02-171-1/+1
| | | | | | Patch from attachment to FS#512 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dropbear: bump PKG_RELEASEStijn Tintel2017-02-171-1/+1
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 27040dbf89fb45dd9b5cc663e23bb19afc294d29)
* dropbear: enable SHA256 HMACsJoseph C. Sible2017-02-171-3/+2
| | | | | | | | | The only HMACs currently available use MD5 and SHA1, both of which have known weaknesses. We already compile in the SHA256 code since we use Curve25519 by default, so there's no significant size penalty to enabling this. Signed-off-by: Joseph C. Sible <josephcsible@users.noreply.github.com> (cherry picked from commit 0bf85ef04806e0fd5a6f78ac9f6a32aabb1e7fdc)
* ar71xx: fix ethernet PLL configuration for QCA956xFelix Fietkau2017-02-171-1/+1
| | | | | | | QCA956x is configured like AR934x, not like the older chips. Should fix ethernet hangs when using the WAN port without SGMII Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86: Set default baud rate on Geode images to 115200David Woodhouse2017-02-171-1/+0
| | | | | | | | | | | Prior to commit 1496b95a0 ("x86: clean up default grub baudrate settings") we had three different baud rates for the Geode targets: 19200 for net5501, 38400 for alix2, and 115200 for Geos. It doesn't seem that there's a very good reason for varying from our default 115200 baud, so let's make the Geode target do that instead. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* x86: Add Geos profile for Geode subtargetDavid Woodhouse2017-02-173-0/+44
| | | | | | | | | | This makes the Geode images actually useful again. The Geos profile should include the relevant hardware for that board, and the Default profile adds the via-rhine adapter which seems to have been present in the net5501 and alix targets killed in commit 9e0759ea265 ("x86: merge all geode based subtargets into one"). Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* x86: Add board configs for the PC Engines APU2Chris Blake2017-02-172-0/+8
| | | | | | | | This adds the default LED and network settings for the PC Engines APU2 when running under the x86 target. [dwmw2: Change Ethernet port setup] Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* x86: Enable DIAG LED on GeosDavid Woodhouse2017-02-172-1/+79
| | | | | | | | | Based on a patch from Chris Blake <chrisrblake93@gmail.com>, except let's do it by using the LED configuration instead of hard-coding it for each board type. And try using /bin/board_detect to do the default behaviour, on the first boot where the config hasn't yet been generated. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* x86: Move Traverse Geos configs into x86 base-filesChris Blake2017-02-172-0/+0
| | | | | | | | | | This change moves the files in 657418d to the root of the x86 target. This is done in preperation for adding more devices under other subtargets. CC: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* x86: Add configuration back for Traverse GeosDavid Woodhouse2017-02-172-0/+45
| | | | | | | | When we merged all the Geode boards into one generic target, the default network and LED configuration was lost. Put it back. Fixes: 9e0759ea2653 ("x86: merge all geode based subtargets into one") Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* Mark targets using kernel 3.18 as source-onlyRafał Miłecki2017-02-176-6/+6
| | | | | | | | | | | | We're past v17.01.0-rc2 phase and these few targets are stuck at 3.18 kernel. We obviously don't want to have targets like this built for the release, especially with 3.18 being EOL. It may be not too late for bringing these targets back for the next minor release, so just mark them as source-only instead of dropping completely. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: fix the number of uarts for MT7688Furong Xu2017-02-161-2/+2
| | | | | | Same as MT7621 and MT7628, MT7688 allows up to 3 uarts Signed-off-by: Furong Xu <xfr@outlook.com>
* ramips: fix PWM pin mux conflict in dtsiFurong Xu2017-02-161-4/+0
| | | | | | | | | | | | | GPIO18 and GPIO19 on OMEGA2(+) should be GPIO mode, enable PWM lead to a conflict [ 0.290633] rt2880-pinmux pinctrl: pin io18 already requested by pinctrl; cannot claim for 10005000.pwm [ 0.299722] rt2880-pinmux pinctrl: pin-18 (10005000.pwm) status -22 [ 0.305729] rt2880-pinmux pinctrl: could not request pin 18 (io18) from group pwm0 on device rt2880-pinmux [ 0.315131] mtk-pwm 10005000.pwm: Error applying setting, reverse things back Keep PWM disabled. Signed-off-by: Furong Xu <xfr@outlook.com>
* ugps: fix typoCezary Jackiewicz2017-02-162-2/+2
| | | | | | | | | | | | | | | | | | | | | | | Removing redundant spaces from the name of the option. Without fix: root@LEDE:~# opkg install ugps Installing ugps (2016-10-24-32a6b2b7-1) to root... Downloading http://downloads.lede-project.org/releases/17.01-SNAPSHOT/packages/mips_24kc/base/ugps_2016-10-24-32a6b2b7-1_mips_24kc.ipk Configuring ugps. uci: Parse error (invalid character in name field) at line 3, byte 23 uci: Parse error (invalid character in name field) at line 3, byte 23 sh: out of range root@LEDE:~# uci show gps uci: Parse error (invalid character in name field) at line 3, byte 23 With this fix: root@LEDE:~# uci show gps gps.@gps[0]=gps gps.@gps[0].tty='ttyACM0' gps.@gps[0].adjust_time='1' Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* brcm47xx: fix button inversion for Asus WL-500WMirko Parthey2017-02-162-8/+46
| | | | | | | | | The Asus WL-500W buttons are active high, but the software treats them as active low. Fix the inverted logic. Signed-off-by: Mirko Parthey <mirko.parthey@web.de> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* brcm47xx: fix USB driver choice for Asus WL-500WMirko Parthey2017-02-151-1/+1
| | | | | | | | | | | | | | | | BCM4704 SoC has only USB 1.1 core: ssb: Core 3 found: USB 1.1 Hostdev (cc 0x808, rev 0x03, vendor 0x4243) but this device actually comes with two USB 2.0 ports. It appears embedded controller isn't used but instead there are two PCI attached controllers (next to the BCM4321 wireless card): 1106:3038 VT82xx/62xx UHCI USB 1.1 Controller 1106:3104 USB 2.0 Choose a set of USB drivers which actually support this hardware. Signed-off-by: Mirko Parthey <mirko.parthey@web.de> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* qos-scripts: fix module load commands (FS#438)Felix Fietkau2017-02-151-2/+1
| | | | | | | fq_codel is built-in, and xt_CONNMARK is provided by the xt_connmark module Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix crashes on MIPS when loading kernel modules under memory pressureFelix Fietkau2017-02-152-2/+8
| | | | | | | | | | | When memory is tight, modules may need to be loaded into vmalloc() space. The code then has to generate jump trampolines which enable relocations between vmalloc space and physical address space. The code had a bug that was freeing these trampolines even when the module was successfully loaded. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mdns: update and rename package to the umdnsRafał Miłecki2017-02-154-24/+24
| | | | | | | | | | | | | | This update includes numerous small fixes for: 1) Interfaces setup 2) Packets parsing 3) Sending replies Without this there were multiple problems with exchanging information between (u)mdns and other implementations (including (u)mdns as well). This also follows project rename to umdns which was required to avoid confusion with Apple's mdnsd from mDNSResponder project. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ar71xx: fix DEFAULT_PACKAGES for mikrotik devicesFelix Fietkau2017-02-151-1/+2
| | | | | | Include packages from the default profile for NAND devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: add buildbot specific config option for setting defaultsFelix Fietkau2017-02-155-5/+20
| | | | | | | | | | This can be used to tweak the buildbot behavior without having to change buildbot's configuration. It will also allow us to add more aggressive clean steps (e.g. on toolchain changes), which would break developers' workflows if enable by default. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools: patch-image: fix file descriptor leak.Furong Xu2017-02-151-4/+0
| | | | | | Maybe this is committed by mistake, fix it. Signed-off-by: Furong Xu <xfr@outlook.com>
* octeon: only copy sysupgrade file if presentJohn Crispin2017-02-151-1/+1
| | | | | | | | | | this caused 'mv: can't rename '/mnt/sysupgrade.tgz': No such file or directory' when running sysupgrade -n Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: Add missing device package om-watchdog for MR1750Sven Eckelmann2017-02-151-1/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: add OpenMesh A40 to OpenMesh A60 profileSven Eckelmann2017-02-151-1/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: extract ath10k wifi board.bin for the OpenMesh A40 boardSven Eckelmann2017-02-151-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* package/uboot-envtools: add OpenMesh A40 supportSven Eckelmann2017-02-151-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* package/om-watchdog: add OpenMesh A40 supportSven Eckelmann2017-02-151-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: enable sysupgrade for the OpenMesh A40Sven Eckelmann2017-02-152-0/+3
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: add user-space support for the OpenMesh A40Sven Eckelmann2017-02-154-0/+11
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 08:43:22 +0000