aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kmod-sched-cake: update & restore DSCP washingKevin Darbyshire-Bryant2016-12-121-4/+4
| | | | | | | | | | | | | | | | | | | | | | | Track upstream changes, incl changes in packet overhead accounting (automatically taking care of linux' packet sizing knowledge), improvements to triple isolated DRR handling (new flow dominance), statistics tweak & allow more packet drops in stressed conditions. Under tests this has significantly improved latency control under 'many flows to one' scenarious as is typical of bittorrent and MS Windows update. I also restored 'DSCP washing' functionality in my repo which follows upstream closely (like a hawk!) with tc keywords 'wash/nowash'. This allows cake to limit/control packets in bands determined by a packet's DSCP but to clear those DSCP bits on qdisc egress. This functionality was originally removed as part of an attempt to push cake into the kernel, which hasn't actually happened as yet. A matching commit is required to iproute2/tc to support the new overhead handling, keyword changes as well as the 'wash/nowash' tweak. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* firmware-utils: tplink-safeloader: update support lists for CPE210/510/...Matthias Schiffer2016-12-121-4/+14
| | | | | | | Adds support for new EU and US variants; removes a few strings that were never actually used and have been removed from the stock firmwares. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: simplify model detection for TP-Link Pharos devicesMatthias Schiffer2016-12-121-19/+2
| | | | | | | This also makes the detection more flexible, as it doesn't need to check for each model explicitly. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mt76: update to the latest version, fixes dfs issuesFelix Fietkau2016-12-121-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tcpdump: reduce size of -mini by removing more infrequently used protocolsFelix Fietkau2016-12-121-23/+25
| | | | | | | | | | | This removes: - BGP - CDP - SCTP MIPS binary .ipk size is reduced from ~150k to ~130k Signed-off-by: Felix Fietkau <nbd@nbd.name>
* net/utils/tcpdump: update to 4.8.1p-wassi2016-12-124-576/+700
| | | | | | Update tcpdump to upstream release 4.8.1 Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* mbedtls: tune config to reduce size and improve performanceFelix Fietkau2016-12-121-5/+43
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mbedtls: sync with polarssl configFelix Fietkau2016-12-121-9/+80
| | | | | | | One of those changes is re-enabling blowfish support to make openvpn-mbedtls compatible with common configurations Signed-off-by: Felix Fietkau <nbd@nbd.name>
* openvpn: quote parameters to --push in openvpn config fileMagnus Kroken2016-12-121-1/+2
| | | | | | | | | | | | | | OpenVPN requires arguments to --push to be enclosed in double quotes. One set of quotes is stripped when the UCI config is parsed. Change append_params() of openvpn.init to enclose push parameters in double quotes. Unquoted push parameters do not cause errors in OpenVPN 2.3, but OpenVPN 2.4 fails to start with unquoted push parameters. Fixes: FS#290. Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* mbedtls: enable MBEDTLS_DHM_CMagnus Kroken2016-12-122-10/+1
| | | | | | | This option is required by OpenVPN, and OpenVPN 2.4 uses mbedTLS 2.x. DHM_C is also already enabled in the PolarSSL 1.3.x config.h. Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* ar71xx: remove obsolete flash chip locking codeFelix Fietkau2016-12-125-52/+11
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove PB92 reference design board supportFelix Fietkau2016-12-1210-89/+0
| | | | | | | Due to flash size limitations, support for this board has not been functional for years Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove AP113 reference design board supportFelix Fietkau2016-12-1212-106/+0
| | | | | | | Due to flash size limitations, support for this board has not been functional for years Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove AP81 reference design board supportFelix Fietkau2016-12-1219-122/+10
| | | | | | This board is very old and unlikely to still be relevant today. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove obsolete duplicate driver source fileFelix Fietkau2016-12-121-294/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove AP83 reference design board supportFelix Fietkau2016-12-1219-690/+3
| | | | | | | | This board is very old and unlikely to still be relevant today. Support for it contains a significant amount of device specific baggage which is worth getting rid of. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: clean up spi controller related patchesFelix Fietkau2016-12-1223-667/+202
| | | | | | Remove various hacks for fast read, un-break device tree support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: disable CONFIG_FW_LOADER_USER_HELPER_FALLBACKRafał Miłecki2016-12-121-0/+1
| | | | | | | | | | | There are many targets using user space scripts to generate firmware but bcm53xx doesn't need this, so let's disable that kernel option. This lets us avoid some scary-looking kernel warnings like: brcmfmac 0001:04:00.0: Falling back to user helper firmware brcm!brcmfmac43602-pcie.txt: firmware_loading_store: map pages failed Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* lantiq: remove "init" kernel command line parameter from bootargsMartin Blumenstingl2016-12-1234-125/+2
| | | | | | | | | | /etc/preinit has been the default init-script for a very long time (at least since Linux 2.6.30 in OpenWrt). Remove the kernel command line "init" parameter to get rid of duplicate and inconsistent definitions of this parameter (some boards, like FRITZ3370 for example did not use it at all, while it's just copy and paste on others). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: specify console using stdout-path instead of cmdline argumentMartin Blumenstingl2016-12-1240-37/+70
| | | | | | | | Use devicetree's /chosen/stdout-path instead of the kernel command line (embedded in the .dts-files) to specify the serial console. Using the chosen node is recommended on devicetree based platforms. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* uboot-envtools: add support for YunCore SR3200 and XD3200Piotr Dymacz2016-12-121-1/+3
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for YunCore SR3200 and XD3200Piotr Dymacz2016-12-1212-4/+256
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | YunCore SR3200 is a dual-band AC1200 router, based on Qualcomm/Atheros QCA9563+QCA9882+QCA8337N. YunCore XD3200 (FCC ID: 2ADUG-XD3200) is a dual-band AC1200 ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9563+QCA9882+QCA8334. Common specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB or RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz, with ext. PA (SKY65174-21), up to 30 dBm - 2T2R 5 GHz, with ext. PA (SKY85405-11) and LNA (SKY85601-11), up to 30 dBm SR3200 specification: - 5x 10/100/1000 Mbps Ethernet - 6x ext. RP-SMA antennas (actually, only 4 are connected with radio chips) - 3x LED (+ 5x LED in RJ45 sockets), 1x button - UART header on PCB XD3200 specification: - 2x 10/100/1000 Mbps Ethernet, with 802.3at PoE support (WAN port) - 4x internal antennas - 3 sets of LEDs on external PCB (+ 2x LED near RJ45 sockets), 1x button - UART and JTAG (custom 6-pin, 2 mm pitch) headers on PCB LED for 5 GHz WLAN is currently not supported on both devices as it is connected directly to the QCA9882 radio chip. Flash instruction under vendor firmware, using telnet/SSH: 1. If your firmware does not have root password, go to point 5 2. Connect PC with 192.168.1.x address to LAN or WAN port 3. Power up device, enter failsafe mode with button (no LED indicator!) 4. Change root password and reboot (mount_root, passwd ..., reboot -f) 5. Upload lede-ar71xx-...-sysupgrade.bin to /tmp using SCP 6. Connect PC with 192.168.188.x address to LAN port, SSH to 192.168.188.253 7. Invoke: - cd /tmp - fw_setenv bootcmd "bootm 0x9fe80000 || bootm 0x9f050000" - mtd -e firmware -r write lede-ar71xx-...-sysupgrade.bin firmware Flash instruction under U-Boot, using UART: 1. tftp 0x80060000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9fe80000 || bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ca-certificates: update to version 20161130Christian Schoenebeck2016-12-121-2/+2
| | | | Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
* layerscape: add 64b/32b target for ls1046ardb deviceYutang Jiang2016-12-1220-3/+2574
| | | | | | | | | | | | | | | | | | | | | | | | | | Add support for NXP layerscape ls1046ardb 64b/32b Dev board. LS1046ARDB Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 512 Mbyte NAND flash * Two 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card * On-board 4G eMMC Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: * PCIe1 (SerDes2 Lane0) to miniPCIe slot * PCIe2 (SerDes2 Lane1) to x2 PCIe slot * PCIe3 (SerDes2 Lane2) to x4 PCIe slot * USB 3.0: one super speed USB 3.0 type A port, one Micro-AB port * UART: supports two UARTs up to 115200 bps for console Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* layerscape: fman-ucode: prefer github over git.freescale.comYutang Jiang2016-12-121-1/+1
| | | | | | | In order to prevent the impact of the merger of the company and the potential rebase of the SDK repositories, migrate the u-boot source to github. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* layerscape: uboot-layerscape: prefer github over git.freescale.comYutang Jiang2016-12-1295-18498/+9
| | | | | | | In order to prevent the impact of the merger of the company and the potential rebase of the SDK repositories, migrate the u-boot source to github. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* base-files: Changed UCI variable name for GPIO value from 'default' to 'value'Julian Labus2016-12-121-1/+1
| | | | | | | | | | | This changes the UCI variable for the GPIO value from system.$cfg.default back to system.$cfg.value as it was before the change from uci-defaults [1] to board.d. /etc/init.d/gpio_switch [2] still expects the value to be in system.$cfg.value. [1] https://github.com/lede-project/source/blob/d65916047b44d6d157d88d15e8e3d92555c5e6f8/package/base-files/files/lib/functions/uci-defaults.sh#L197 [2] https://github.com/lede-project/source/blob/master/package/base-files/files/etc/init.d/gpio_switch#L17 Signed-off-by: Julian Labus <julian@labus-online.de>
* lantiq: falcon: remove bootargs-appendHauke Mehrtens2016-12-1010-40/+0
| | | | | | | This attribute is not evaluated any more and the boot loader on these reference boards does not provide a broken root= or console= parameter. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add TI tmp102 and tmp103 temperature sensorsHauke Mehrtens2016-12-101-0/+30
| | | | | | | This just adds the kmods for these kernel modules. This is found on some Lantiq / Intel reference boards. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add KERNEL_DEBUG_PINCTRL and KERNEL_DEBUG_GPIOHauke Mehrtens2016-12-101-0/+8
| | | | | | | | This makes it possible to activate the gpio and the pinctl debugging from LEDE menuconfig. Acked-by: John Crispin <john@phrozen.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* build: support adding version code to file names (FS#323)Jo-Philipp Wich2016-12-092-2/+13
| | | | | | | | | | | | | | Now that the VERSION_NUMBER variable holds the human friendly name and not the commit ID anymore, we need to support adding the revision ID as well. Introduce a new config variable CONFIG_VERSION_CODE_FILENAMES which, if set, causes the resulting file names to contain a commit ID designation as printed by scripts/getver.sh. Also sanitize the input variables to ensure that the resulting strings are lowercased and no not contain spaces. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* lantiq: simplify ath9k eeprom extraction scriptMathias Kresin2016-12-081-11/+16
| | | | | | | | | | | Add an extra function to patch the mac and fixup the checksum afterwards. Calculate the checksum position automatically. The offset to the mac address is the same for all checksum protected EEPROMs. No EEPROM requires a byte swapped mac address. The mac byte swap code was required due to an bug in the script that is now fixed. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix ath9k EEPROM data swapping for some devicesMartin Blumenstingl2016-12-081-14/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The EEPROM data in the flash of the ARV7518PW, ARV8539PW22, BTHOMEHUBV2B and BTHOMEHUBV3A is stored byte-swapped (swab16), meaning that for example the ath9k base_eep_header fields "version" (high and low byte), "opCapFlags" and "eepMisc" are swapped (the latter ones are just 1 byte wide, thus their position is swapped). The old "ath,eep-endian" property enabled the corresponding swapping logic in the ath9k driver (swab16 in ath9k_hw_nvram_swap_data, which is based on the magic bytes in the EEPROM data which have nothing to do with the calibration data - thus this logic should not be used anymore). Since we have switched to the upstream ath9k devicetree bindings there is no binding anymore which enables swab16 in ath9k (as this logic is not recommended anymore as explained above), leading to ath9k initialization errors: ath: phy0: Bad EEPROM VER 0x0001 or REV 0x00e0 (this shows that the version field is swapped, expected values are VER 0x000E and REV 0x0001) Swapping the ath9k calibration data when extracting it from the flash fixes the devices listed above (all other devices do not require additional swapping, since the position of the fields is already as expected by ath9k). This allows ath9k to read the version correctly again, as well as the more important "eepmisc" field (which is used for determining whether the data inside the EEPROM is Big or Little Endian which is required to parse the EEPROM contents correctly). Fixes: a20616863d3 ("lantiq: use ath9k device tree bindings binding/owl-loader") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* bcm53xx: update patch adding fake USB doorbellRafał Miłecki2016-12-071-26/+8
| | | | | | | Rob suggested I should use of_machine_is_compatible insteak of a new property and updated patch has been sent. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* dnsmasq: Fix splitting hostid for DHCPv6 static leasesArjen de Korte2016-12-061-1/+1
| | | | | | | | | Correct splitting the 32-bit 'hostid' value to two 16-bit hexadecimal values. Previously, the lower 16-bit value was truncated to an 8-bit value, which would result in hostid values 100 and 200 both to be set to [::0:0] instead of [::0:100] and [::0:200] respectively. Signed-off-by: Arjen de Korte <build+lede@de-korte.org>
* kernel: backport LED patch which will allow better DT integrationRafał Miłecki2016-12-061-0/+53
| | | | | | | It's not used by any driver yet, it may just simplify development and testing new features. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: fix potential crash in usbport LED trigger driverRafał Miłecki2016-12-062-0/+70
| | | | | | This backports upstream accepted fix. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ar71xx: fix LEDs and sysupgrade support for TL-WA801ND v3Matthias Schiffer2016-12-064-3/+9
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* tools/upslug2: add SHA256 hash to use mirror tarballFelix Fietkau2016-12-051-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dnsmasq: reload config if host name is modifiedFlorian Eckert2016-12-041-1/+2
| | | | | | | If the hostname in /etc/config/system is modified the dnsmasq will not reread the update host file under /tmp/hosts/dhcp.$cfg. Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
* ramips: Fix led init script for Lenovo Y1/Y1sBangLang Huang2016-12-041-3/+10
| | | | | | | This commit fix the led init script for Lenovo Y1 and Y1S due to the manual and dts file. Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
* brcm2708: update linux 4.4 patches to latest versionÁlvaro Fernández Rojas2016-12-04531-480/+6619
| | | | | | | As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.4.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708-gpu-fw: update to latest versionÁlvaro Fernández Rojas2016-12-041-8/+8
| | | | | | Also switches hases to SHA256 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: bump to 4.4.36Álvaro Fernández Rojas2016-12-044-23/+28
| | | | | | | Refresh patches on all 4.4 supported platforms. Compile & run tested: brcm2708/bcm2710 - Raspberry Pi 3 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* libs: libnetfilter-queue: update to a newer version in git repoAlexandru Ardelean2016-12-042-34/+36
| | | | | | | | | Last release of libnetfilter-queue was in 2012. There don't seem to be any release tarballs since then. This updates it to a more recent version, pointing to the git repo. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* ppp: Split the ppp-up for the IPv6 partPierre Lebleu2016-12-044-12/+29
| | | | Signed-off-by: Pierre Lebleu <pme.lebleu@gmail.com>
* orion: make image size errors non-fatalFelix Fietkau2016-12-041-8/+4
| | | | | | Fixes build errors on the generic subtarget Signed-off-by: Felix Fietkau <nbd@nbd.name>
* orion: Enable CONFIG_MV_XORFlorian Fainelli2016-12-041-0/+2
| | | | | | | This is helpful for Orion-based NAS boxes that have the XOR engine enabled since it provides faster software RAID. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* orion: Add uboot-envtools in the default package listFlorian Fainelli2016-12-041-1/+2
| | | | | | Makes sense since most, if not all orion platforms use this bootloader. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* kernel: Add missing kernel config symbolFlorian Fainelli2016-12-041-0/+1
| | | | | | Add CONFIG_DW_DMAC_PCI Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 20:11:30 +0000