aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* [ramips] adds fon20n profileJohn Crispin2012-11-071-0/+19
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34112 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use kernel 3.6.6John Crispin2012-11-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ## Booting image at 80800000 ... Image Name: MIPS OpenWrt Linux-3.6.6 Created: 2012-11-06 14:19:54 UTC System Control Status = 0x20440000 Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 3560768 Bytes = 3.4 MB Load Address: 80000000 Entry Point: 80000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80000000) ... ## Giving linux memsize in MB, 32 Starting kernel ... [ 0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 0001964c (MIPS 24KEc) [ 0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x01ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x01ffffff] [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Writing ErrCtl register=0000c388 [ 0.000000] Readback ErrCtl register=0000c388 [ 0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem) [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:48 [ 0.000000] console [ttyS1] enabled, bootconsole disabled [ 0.000000] console [ttyS1] enabled, bootconsole disabled [ 0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952) [ 0.090000] pid_max: default: 32768 minimum: 301 [ 0.100000] Mount-cache hash table entries: 512 [ 0.110000] NET: Registered protocol family 16 [ 0.120000] MIPS: machine is Allnet ALL0239-3G [ 0.140000] bio: create slab <bio-0> at 0 [ 0.150000] Switching to clocksource MIPS [ 0.160000] NET: Registered protocol family 2 [ 0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.200000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.210000] TCP: reno registered [ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.240000] NET: Registered protocol family 1 [ 5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 5.490000] msgmni has been set to 52 [ 5.500000] io scheduler noop registered [ 5.510000] io scheduler deadline registered (default) [ 5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A [ 5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A [ 5.560000] physmap platform flash device: 00800000 at bf000000 [ 5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000 [ 5.600000] Amd/Fujitsu Extended Query Table at 0x0040 [ 5.610000] Amd/Fujitsu Extended Query version 1.3. [ 5.620000] number of CFI chips: 1 [ 5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0 [ 5.640000] Creating 6 MTD partitions on "physmap-flash.0": [ 5.650000] 0x000000000000-0x000000030000 : "u-boot" [ 5.660000] 0x000000030000-0x000000040000 : "u-boot-env" [ 5.680000] 0x000000040000-0x000000050000 : "factory" [ 5.690000] 0x000000050000-0x000000130000 : "kernel" [ 5.700000] 0x000000130000-0x000000800000 : "rootfs" [ 5.710000] mtd: partition "rootfs" set to be root filesystem [ 5.730000] split_squashfs: error occured while reading from "physmap-flash.0" [ 5.740000] 0x000000050000-0x000000800000 : "firmware" [ 5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33 [ 5.780000] TCP: cubic registered [ 5.780000] NET: Registered protocol family 17 [ 5.790000] 8021q: 802.1Q VLAN Support v1.8 [ 5.820000] Freeing unused kernel memory: 2676k freed [ 6.490000] Button Hotplug driver version 0.4.1 - preinit - Press the [f] key and hit [enter] to enter failsafe mode - regular preinit - - init - Please press Enter to activate this console. [ 10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993 [ 10.170000] Backport based on wireless-testing.git master-2012-09-07 [ 10.180000] compat.git: wireless-testing.git [ 10.210000] cfg80211: Calling CRDA to update world regulatory domain [ 10.230000] cfg80211: World regulatory domain updated: [ 10.240000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.250000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.270000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.280000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.300000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.430000] NET: Registered protocol family 10 [ 10.760000] PPP generic driver version 2.4.2 [ 10.820000] l2tp_core: L2TP core driver, V2.0 [ 10.840000] l2tp_netlink: L2TP netlink interface [ 10.870000] sit: IPv6 over IPv4 tunneling driver [ 10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.060000] NET: Registered protocol family 24 [ 11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max) [ 11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 14.510000] device eth0.1 entered promiscuous mode [ 14.520000] device eth0 entered promiscuous mode [ 14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready [ 14.550000] br-lan: port 1(eth0.1) entered forwarding state [ 14.560000] br-lan: port 1(eth0.1) entered forwarding state [ 16.560000] br-lan: port 1(eth0.1) entered forwarding state [ 16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33 BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- BARRIER BREAKER (Bleeding Edge, r34079) ----------------------------------------------------- * 1/2 oz Galliano Pour all ingredients into * 4 oz cold Coffee an irish coffee mug filled * 1 1/2 oz Dark Rum with crushed ice. Stir. * 2 tsp. Creme de Cacao ----------------------------------------------------- root@OpenWrt:/# git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34111 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add HAVE_CLK to Kconfig on all ramips socsJohn Crispin2012-11-071-0/+3
| | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34110 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add linux-3.6 configuration for ramips socsJohn Crispin2012-11-073-0/+410
| | | | | | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> create mode 100644 target/linux/ramips/rt288x/config-3.6 create mode 100644 target/linux/ramips/rt305x/config-3.6 create mode 100644 target/linux/ramips/rt3883/config-3.6 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34109 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: port patches to linux-3.6John Crispin2012-11-0713-0/+414
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34108 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [kernel] Load schedule modulesJohn Crispin2012-11-071-0/+4
| | | | | | | | They were missing the AUTOLOAD directive. Signed-off-by: Jonh Wendell <jonh.wendell@oiwifi.com.br> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34107 3c298f89-4303-0410-b956-a3cf2f4a3e73
* buildroot: isolate the .install stamp files for build variants (#12279)Jo-Philipp Wich2012-11-073-17/+18
| | | | | | | | This fixes missing embedded packages if multiple build variants are selected in the build config, e.g. missing ppp if CONFIG_PACKAGE_ppp=y and CONFIG_PACKAGE_ppp-multilink=m . git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34106 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: Enable endian check support for ath9k pci fixup.Jonas Gorski2012-11-072-0/+102
| | | | | | | | | | Some ath9k caldatas need to be "endian checked". This patch allows selecting wether to enable endian check or not. Endian check is disabled by default. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34105 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ixp4xx]: fixup typos in the compex patchImre Kaloz2012-11-071-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34104 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux: export bcm963xx_tag.h to userspaceJonas Gorski2012-11-0617-17/+455
| | | | | | | | | | | | Export bcm963xx_tag.h so mtd can use it without using kernel includes. Signed-off-by: Catalin Patulea <cat@vv.carleton.ca> [jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header from original location, refresh patches, use a more matching patch number, port to 3.6] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34103 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns3xxx: refresh kernel config fileLuka Perkov2012-11-061-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34102 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns3xxx: use files directoryLuka Perkov2012-11-0618-2352/+1907
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34101 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] add OWRTDTB marker patchJohn Crispin2012-11-062-0/+84
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34100 3c298f89-4303-0410-b956-a3cf2f4a3e73
* remove bogus fileJohn Crispin2012-11-061-0/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34099 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] unbreak ltq-dsl-fwJohn Crispin2012-11-062-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34098 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] add support for arv7525John Crispin2012-11-062-0/+13
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34097 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] prepare dsl driver for 3.6 and split fw into a seperate packageJohn Crispin2012-11-065-64/+72
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34096 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [cns3xxx]: refresh patchesImre Kaloz2012-11-062-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34095 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [cns3xxx]: add default packagesImre Kaloz2012-11-061-1/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34094 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux: generic: fix split_squashfs for 3.6Jonas Gorski2012-11-061-1/+1
| | | | | | | _read expects the retlen to be initialized to zero, which the mtd_read helper does. So fix it by using mtd_read instead of calling _read directly. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34093 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm63xx: fix SPW303V imagesJonas Gorski2012-11-051-0/+1
| | | | | | | SPW303V also needs its CRC fixed up since increasing the image size to 4MB to prevent the dual image mode of CFE. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34091 3c298f89-4303-0410-b956-a3cf2f4a3e73
* netifd: don't send a default client identifier in DHCP requests if no ↵Jo-Philipp Wich2012-11-051-2/+2
| | | | | | clientid uci option is given (#12426) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34089 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: nuke ath79_set_usb_power_gpio helperGabor Juhos2012-11-052-94/+0
| | | | | | | | It is no longer used. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34088 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpioGabor Juhos2012-11-059-19/+30
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34087 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update linux 3.6 to 3.6.6Gabor Juhos2012-11-052-3/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34086 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ixp4xx]: use the mainline machname for the compex boardsImre Kaloz2012-11-0510-81/+63
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34083 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: enable USB power on the DIR-645Gabor Juhos2012-11-051-0/+5
| | | | | | | | Closes #12422. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34082 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux/3.3: backport an upstream GPIO patchGabor Juhos2012-11-051-0/+68
| | | | | | | | | | | | | The backported patch introduces new flags to automatically export GPIOs when using the convenience unctions gpio_request_one() or gpio_request_array(). This will be used by ar71xx/ramips platforms. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34081 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Add ledtrig-oneshot module for 3.6 kernelsGabor Juhos2012-11-051-0/+17
| | | | | | | | | | | This patch adds a package for the ledtrig-oneshot module, available in 3.6 and later. [juhosg: change dependency from LINUX_3_6 to !LINUX_3_3] Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34079 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add restorefactory to default package set for ALL0239-3G and ALL0256NGabor Juhos2012-11-051-2/+2
| | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34078 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: don't use the unknown LED on the ZCN-1523-5 boardGabor Juhos2012-11-041-4/+1
| | | | | | | | | | | | | | According to #12421, GPIO 1 controls the power output on the unused lines of the LAN2 port. Remove the LED definition in order to prevent possible permanent hardware damage. If someone needs that, the power-out feature can be controlled via the GPIO sysfs interface. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34076 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: include mtd layout in the command line for ZCN-1523H-* boardsGabor Juhos2012-11-041-2/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34074 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boardsGabor Juhos2012-11-042-4/+10
| | | | | | | | Also add the missing ATH79_MACH_ZCN_1523H_5 symbol. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34072 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mtd: avoid adding the kernel dir to includes, use the toolchain headersFelix Fietkau2012-11-041-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34071 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ppp: add more pppol2tpv3 related structs from the kernel headers to fix ↵Felix Fietkau2012-11-041-1/+27
| | | | | | compile issues with linux 3.6 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34070 3c298f89-4303-0410-b956-a3cf2f4a3e73
* iptables: remove support for libipq, it has been obsolete for years and is ↵Felix Fietkau2012-11-041-16/+0
| | | | | | unsupported in newer kernels git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34069 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux-3.6: fix portability of some includes files in tools/ used on the hostFelix Fietkau2012-11-042-22/+53
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34068 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] 3.6 is not the default yetJohn Crispin2012-11-031-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34065 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] adds dts files and make devicetree images buildableJohn Crispin2012-11-0210-9/+1164
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34064 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] update ase target for 3.6John Crispin2012-11-024-28/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34063 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] add subtarget, as of 3.6 we dont seperate xway SoCJohn Crispin2012-11-023-0/+47
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34062 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] adds 3.6 files, patches and configJohn Crispin2012-11-0235-0/+9938
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34061 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] move files/ -> files-3.3/John Crispin2012-11-02135-0/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34060 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [lantiq] prepare Makefile for 3.6John Crispin2012-11-021-2/+4
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34059 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [tools] rename patch-cmdline and add code for patching DTB files into kernel ↵John Crispin2012-11-024-3/+107
| | | | | | images git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34058 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: make yaffs work on 3.6Gabor Juhos2012-11-015-0/+341
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34054 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: rename jffs2 patchesGabor Juhos2012-11-016-0/+0
| | | | | | | | | Make room for the upcoming yaffs patches. No functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34053 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [sdk] Fix feeds.conf.default when no SVN info presentDaniel Dickinson2012-11-011-2/+3
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34051 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: use mtd_* helpers in the yaffs codeGabor Juhos2012-10-312-0/+320
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34046 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [cns3xxx]: move PCIe init to subsys init callImre Kaloz2012-10-311-0/+156
| | | | | | | | | | | | | | | | ARM Linux PCI/PCIe hardware intialization needs to occur before device_init as it does not support hotplug. I have modeled the cns3xxx PCIe init after other ARM platforms. Registering it early resolves resource issues occuring during bus enumeration that occur when a device driver is linked static in the kernel. Instead of passing in a bitmask to enable the 2 available ports, link detect is used to enable ports that have a valid link. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34044 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 20:40:02 +0000