aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Make linux kernel builds reproducible when BUILDBOT selectedAlexander Couzens2019-07-021-0/+2
| | | | | | | | | | | The linux kernel is not reproducible because the build user and domain is included into the kernel. Set the build user to `builder` and build domain to buildhost. It's also possible to build reproducible builds by setting KERNEL_BUILD_USER KERNEL_BUILD_DOMAIN to static values. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ramips: add support for TP-Link TL-WR841n v14Alexander Müller2019-07-024-0/+155
| | | | | | | | | | | | | | | | | | | | | | TP-Link TL-WR841n v14 is a router based on MediaTek MT7628N. - MediaTek MT7628NN - 32 MB of RAM - 4 MB of FLASH - 2T2R 2.4 GHz - 5x 10/100 Mbps Ethernet Installation: - copy the 'openwrt-ramips-mt76x8-tl-wr841n-v14-squashfs-tftp-recovery.bin' file to your tftp server root and rename it to 'tp_recovery.bin'. - configure your PC running the TFTP server with the static IP address 192.168.0.66/24 - push the reset button and plug in the power connector. Wait until the orange led starts blinking (~6sec) Signed-off-by: Alexander Müller <donothingloop@gmail.com> Signed-off-by: Alexander Couzens <lynxis@fe80.eu> [small modifications gpio-hog]
* ramips/leds: use devicetree alias led_wlanAlexander Couzens2019-07-021-0/+4
| | | | | | | | | | | | | | | | | | | | | | Similiar to the lantiq target use a dts alias to define the wlan led instead of static mapping in /etc/board.d/01_leds. Reduce code duplication. A device tree must define the alias "led-wlan" similiar to "led-boot". / { aliases { led-wlan = &led_wlan; }; [..] led_wlan: wlan { label = "tl-wr841n-v14:green:wlan"; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; }; Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* scripts/feeds: add src-include methodBjørn Mork2019-07-011-11/+26
| | | | | | | | | | | | The src-include method allows recursive inclusion of feeds.conf snippets. This can for example be used for adding static local feeds to feeds.conf.default without ever having to update the local feeds.conf: src-include defaults feeds.conf.default src-link custom /usr/local/src/lede/custom Signed-off-by: Bjørn Mork <bjorn@mork.no>
* gemini: Add StorLink SL93512r imagesLinus Walleij2019-07-011-7/+17
| | | | | | | | | | | This adds image generation for the StorLink reference design SL93512r. This board is now supported upstream in kernel v4.19. As this image structure is identical to SQ201 and Raidsonic, we simply refer to this as "storlink-reference" from now on. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: Drop switch kmod and swconfigLinus Walleij2019-07-011-1/+0
| | | | | | | | | The DIR-685 needs this module compiled in for safety (it is facing the LAN ports) and it is now (as of kernel v4.19) using the DSA switch architecture so swconfig is not needed. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* lua5.3: drop unwanted & unneeded PROVIDESRafał Miłecki2019-06-301-2/+0
| | | | | | | | | | The plan for packaging Lua is to have "lua5.1" and "lua5.3" packages with only the first one having "lua" alias (PROVIDES) for backward compatibility with existing packages. Putting PROVIDES in lua5.3 was a copy & paste mistake. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: add network_get_uptime() to /lib/functions/network.shFlorian Eckert2019-06-292-1/+6
| | | | | | Add missing ubus api call for uptime value. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* mvebu: add initial support for uDPU boardVladimir Vid2019-06-284-0/+188
| | | | | | | | | | | | | | | | | | | This adds initial support for micro-DPU (uDPU) board which is based on Armada-3720 SoC. micro-DPU is the single-port FTTdp distribution point unit made by Methode Electronics which offers complete modularity with replaceable SFP modules both for uplink and downlink (G.hn over twisted-pair, G.hn over coax, 1G and 2.5G Ethernet over Cat-5e cable). On-board features: - 512 MiB DDR3 - 2 x 2.5G SFP via HSGMII SERDES interface to the A3720 SoC - USB 2.0 Type-C connector - 4GB eMMC - ETSI TS 101548 reverse powering via twisted pair (RJ45) or coax (F Type) uDPU is intented to run on kernel 4.19 on newer due to the SFP and hardware support. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* mvebu: Fix platform.sh for non-generic espressobin versionsBrett Mastbergen2019-06-281-2/+4
| | | | | | | | When the non-generic espressobin targets were added these board checks were not updated. One side effect of this is that config is not saved during an upgrade of -emmc,-v7, or -v7-emmc devices. Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
* u-boot-mvebu: bump to 2019.04Vladimir Vid2019-06-281-2/+2
| | | | | | | | | Some devices and packages require newer version of u-boot to work properly, update u-boot to keep up with 4.19 kernel. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> [re-added missing commit message] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* lua5.3: fix build with MacOS's makeRafał Miłecki2019-06-282-0/+18
| | | | | | | It apparently requires passing V variable explicitly. Fixes: 6b161bb8d528 ("lua5.3: package Lua 5.3 version") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* lua: fix build with MacOS's makeRafał Miłecki2019-06-282-0/+18
| | | | | | | | It apparently requires passing V variable explicitly. Fixes: fe59b46ca7e0 ("lua: include version number in installed files") Reported-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* lua5.3: package Lua 5.3 versionRafał Miłecki2019-06-285-0/+369
| | | | | | | | | | | | | | | | | | | | This package provides an interpreter and compiler for Lua 5.3.5. It has been decided to use separated package due to a backward incompatibility of Lua 5.2 and 5.3. This package/version: 1) Does not include lnum patch as its author didn't decide to port it to the new version. 2) Does not provide shared library as the old patch doesn't apply anymore. It can be added later if needed. 3) Does not come with examples package as tests were dropped by upstream developers. That said there is definitely a room for improvement and any further work is highly appreciated. It works however and can be safely pushed as a basic/early package release. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* lua: include version number in installed filesRafał Miłecki2019-06-285-10/+108
| | | | | | This will allow installing Lua 5.1 and newer versions at the same time. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* lua: clean up host patch fuzzRafał Miłecki2019-06-282-25/+26
| | | | | | | Refresh host patches to match target changes from the commit 4e800716ac97 ("lua: clean up patch fuzz"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* build: image: make image padding OS agnosticPetr Štetiar2019-06-271-4/+4
| | | | | | | | | | Image padding with dd needs to be done in an OS independent way as not all dd understand capital letter unit specifiers, and not all understand lowercase either. Fixes: 97833a57eff1 ("build: image: add pad-to and pad-rootfs-squashfs helpers") Reported-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: generic: add missing 4.19 config symbolPetr Štetiar2019-06-271-0/+2
| | | | | | | | | | | | | | Fixes following kernel build issue on ath79 with CONFIG_KERNEL_FTRACE=y enabled: Tracers (FTRACE) [Y/n/?] y Kernel Function Tracer (FUNCTION_TRACER) [Y/n/?] y Kernel Function Graph Tracer (FUNCTION_GRAPH_TRACER) [Y/n/?] y Enable trace events for preempt and irq disable/enable (PREEMPTIRQ_EVENTS) [N/y/?] (NEW) ... Preempt / IRQ disable delay thread to test latency tracers (PREEMPTIRQ_DELAY_TEST) [N/m/?] (NEW) Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uqmi: bump to latest git HEADKoen Vandeputte2019-06-271-4/+4
| | | | | | | 1965c7139374 uqmi: add explicit check for message type when expecting a response 01944dd7089b uqmi_add_command: fixed command argument assignment Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.131Koen Vandeputte2019-06-271-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.184Koen Vandeputte2019-06-271-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: none Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: add support for TOTOLINK A7000RChuanhong Guo2019-06-263-0/+133
| | | | | | | | | | | | | | | Specifications: - SoC: MT7621AT - RAM: 128MB - Flash: 16M SPI NOR - Ethernet: 5x GE ports - WiFi: 2.4G: MT7615N 5G: MT7615N Flash instruction: Upload generated sysupgrade firmware through factory web interface. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: mt7621: add IRQ for GPIO nodeChuanhong Guo2019-06-261-0/+3
| | | | | | This makes interrupt-based gpio-keys working. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* layerscape: drop pause frame support for aquantia phyYangbo Lu2019-06-261-52/+10
| | | | | | | | | | | | An aquantia phy patch which dropped pause frame support was missing when integrated LSDK-19.03 kernel patches into OpenWrt. Without this patch, LS1043A 10G port would not work. So apply it. Patch link https://source.codeaurora.org/external/qoriq/qoriq-components/ linux/commit/?h=linux-4.14&id=66346b115818365cfaf99d292871b19f0a1d2850 Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* upgs: update to latest git HEADPetr Štetiar2019-06-261-3/+3
| | | | | | | | cd7eabcd8c9d ugps: Fix compilation under 64-bit 198c06051dd0 Fix build error caused by enabled extra compiler warnings fc2ab8756b3b Enable extra compiler warnings Signed-off-by: Petr Štetiar <ynezz@true.cz>
* base-files: use OPENWRT prefix for os-release variablesBjørn Mork2019-06-261-8/+8
| | | | | | | | | | Just stumbled across this LEDE legacy, without finding any real reason to keep it. There is a single LEDE_DEVICE_MANUFACTURER_URL dependency in the luci feed repo which needs to be syncronized. Signed-off-by: Bjørn Mork <bjorn@mork.no> [re-added missing commit message] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: bump 4.19 to 4.19.56Koen Vandeputte2019-06-255-8/+8
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.130Koen Vandeputte2019-06-258-12/+12
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* x86: fix missing led variable warning during bootPetr Štetiar2019-06-251-0/+2
| | | | | | | | Fixes following warning during the boot: WARNING: Variable 'led' does not exist or is not an array/object Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: generic: add missing 4.19 config symbolPetr Štetiar2019-06-251-0/+1
| | | | | | | | Fixes following kernel build issue on x86/64: PCI PF Stub driver (PCI_PF_STUB) [N/m/y/?] (NEW) Signed-off-by: Petr Štetiar <ynezz@true.cz>
* malta: fix overlay support by updating to f2fs/ext4 based overlaysPetr Štetiar2019-06-252-7/+10
| | | | | | | | | | | | | | | | | Current snapshot images doesn't provide images with usable overlay filesystems: mount_root: no usable overlay filesystem found, using tmpfs overlay So this patch fixes this by updating support to current f2fs/ext4 based overlays and providing squashfs with proper rootfs TARGET_ROOTFS_PARTSIZE size. While at it, I've also added support for optional gzipping of the images, and renamed the output rootfs image filenames to match the more common naming pattern $(IMG_PREFIX)-rootfs-$(FS-TYPE).img. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* malta: configure kernel for f2fs and ext4 based overlaysPetr Štetiar2019-06-251-0/+7
| | | | | | | | jffs2/mtdblock overlays are long time gone, and as we switch to the new f2fs/ext4 based overlays, we need to add missing support for loop block device and f2fs to kernel. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* armvirt: fix overlay support by updating to f2fs/ext4 based overlaysPetr Štetiar2019-06-252-2/+10
| | | | | | | | | | | | | | | | | | Current snapshot images doesn't provide images with usable overlay filesystems: mount_root: no usable overlay filesystem found, using tmpfs overlay So this patch fixes this by updating support to current f2fs/ext4 based overlays and providing squashfs with proper rootfs TARGET_ROOTFS_PARTSIZE size. While at it, I've also added support for optional gzipping of the images, and renamed the output rootfs image filenames to match the more common naming pattern $(IMG_PREFIX)-rootfs-$(FS-TYPE).img. Cc: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* armvirt: configure kernel for f2fs and ext4 based overlaysPetr Štetiar2019-06-251-0/+7
| | | | | | | | jffs2/mtdblock overlays are long time gone, and as we switch to the new f2fs/ext4 based overlays, we need to add missing support for loop block device and f2fs to kernel. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86: image: fix small disk space in squashfs overlayPetr Štetiar2019-06-251-12/+1
| | | | | | | | | | | | | Current squashfs snapshot images are improperly padded by just 128k, which doesn't correspond with TARGET_ROOTFS_PARTSIZE=128 default config option, leading to following: Filesystem Size Used Available Use% Mounted on /dev/root 2.5M 2.5M 0 100% /rom /dev/loop0 85.0K 9.0K 71.0K 11% /overlay overlayfs:/overlay 85.0K 9.0K 71.0K 11% / Signed-off-by: Petr Štetiar <ynezz@true.cz>
* rb532,x86: image: use new IMG_COMBINED and IMG_ROOTFS varsPetr Štetiar2019-06-252-13/+13
| | | | | | | In `build: image: Add IMG_ROOTFS and IMG_COMBINED variables` we've added this new variables so switch to them now. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* build: image: add IMG_ROOTFS and IMG_COMBINED variablesPetr Štetiar2019-06-251-1/+3
| | | | | | Adding those two variables in order to share them across the tree. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* build: image: add variable for gzip-ext4-padded-squashfsPetr Štetiar2019-06-251-0/+17
| | | | | | | This common code could be shared by at least 3 targets (malta, armvirt and x86) so let's factor it out to separate variable. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* build: image: add pad-to and pad-rootfs-squashfs helpersPetr Štetiar2019-06-252-2/+10
| | | | | | For better reusability. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* build: enable gzipped images for armvirt and maltaPetr Štetiar2019-06-251-1/+1
| | | | | | | | As we're now going to pad all images by default to 128MiB let's enable compression of the images for armvirt and malta in order to save some space and bandwidth. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* build: make TARGET_ROOTFS_PARTSIZE 128MiB by defaultPetr Štetiar2019-06-251-1/+1
| | | | | | | | | | | As we're now going to pad all images by default, lets decrease the default rootfs partition size from 256MiB to 128MiB in order to save some space. I'm keeping it above 100MiB in order to keep current behavior, where overlay filesystem is using F2FS. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* tegra: image: remove image paddingPetr Štetiar2019-06-251-1/+0
| | | | | | | Commit "build: Remove TARGET_IMAGES_PAD option" has removed this config option so remove it from this target as well. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86: image: remove TARGET_IMAGES_PAD option and force paddingPetr Štetiar2019-06-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we're producing unusable x86 combined squashfs images (18.06.1, 18.06.2 and snapshots) as we don't enable TARGET_IMAGES_PAD, thus providing very small space for the overlay filesystem, leading to the following with OpenWrt 18.06.1 r7258-5eb055306f images on x86 QEMU: root@(none):/# mount | egrep 'root|overlay' /dev/root on /rom type squashfs /dev/loop0 on /overlay type ext4 overlayfs:/overlay on / type overlay root@(none):/# df -h | egrep 'root|overlay|Size' Filesystem Size Used Available Use% Mounted on /dev/root 2.5M 2.5M 0 100% /rom /dev/loop0 113.0K 8.0K 97.0K 8% /overlay overlayfs:/overlay 113.0K 8.0K 97.0K 8% / We should rather ensure proper image padding in image generation code and we shouldn't rely on config options in order to generate usable images. So this patch removes TARGET_IMAGES_PAD config option and enforces padding on combined images. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* build: remove TARGET_IMAGES_PAD optionPetr Štetiar2019-06-251-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | It's being used only in x86 target to produce combined images, where it's mandatory to have padded images in order to produce working squashfs combined images usable in QEMU. Currently we're producing unusable x86 combined squashfs images (18.06.1, 18.06.2 and snapshots) as we don't enable TARGET_IMAGES_PAD, thus providing very small space for the overlay filesystem, leading to the following with OpenWrt 18.06.1 r7258-5eb055306f images on x86 QEMU: root@(none):/# mount | egrep 'root|overlay' /dev/root on /rom type squashfs /dev/loop0 on /overlay type ext4 overlayfs:/overlay on / type overlay root@(none):/# df -h | egrep 'root|overlay|Size' Filesystem Size Used Available Use% Mounted on /dev/root 2.5M 2.5M 0 100% /rom /dev/loop0 113.0K 8.0K 97.0K 8% /overlay overlayfs:/overlay 113.0K 8.0K 97.0K 8% / So we should rather ensure proper image padding in image generation code and we shouldn't rely on config options in order to generate usable images. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ramips: mt7621: Add new device AsiaRF AP7621-001Daniel Danzberger2019-06-253-0/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specs: SoC: Mediatek MT7621A CPU: 4x 880Mhz Cache: 32 KB I-Cache and 32 KB D-Cach 256 KB L2 Cache (shared by Dual-Core) RAM: DDR3 512MB 16bits BUS FLASH: 16MB Switch: Mediatek Gigabit Switch (1 x LAN, 1 x WAN) USB: 1x 3.0 PCI: 3x Mini PCIe GPS: Quectel L70B BTN: Reset LED: - Power - Ethernet - Wifi - USB UART: UART is present as Pads with throughholes on the PCB. They are located on left side. 3.3V - RX - GND - TX / 57600-8N1 3.3V is the square pad Installation: The stock image is a modified openwrt and can be overflashed via # sysupgrade -F image.bin Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [removed unused label, formatting]
* ath79: fix "spi-gpio: convert deprecated binding"Christian Lamparter2019-06-254-8/+8
| | | | | | | | This patch fixes the previous commit that rendered the devices (mostly leds) useless. Fixes: 1fa24de8c29b ("ath79: spi-gpio: convert deprecated binding") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* build: warn when packages have no associated install sectionJonas Gorski2019-06-251-0/+2
| | | | | | | | | Declaring a package without the appropriate install section is an easy mistake to make, especially when renaming packages. Since this is also easy to detect, warn about it when it happens. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> No-objections-at-all-by: Jo-Philipp Wich <jo@mein.io>
* mt76: update to the latest version, adds preliminary mt7615 supportFelix Fietkau2019-06-251-3/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | b3a2965 mt76x02: fix crash on device reset ffddb68 mt76x02u: check chip version on probe 7fc5f92 mt76x2u: remove duplicated entry in mt76x2u_device_table 61311d9 mt76: introduce mt76_free_device routine a7dfcf2 mt76: move mac_work in mt76_dev 334b4ce mt76: add mac80211 driver for MT7615 PCIe-based chipsets edb2a00 mt76: add unlikely() for dma_mapping_error() check 355c079 mt76: use macro for sn and seq_ctrl conversion 133bffb add firmware for MT7615E 49d9c1b mt76: usb: reduce locking in mt76u_tx_tasklet 3e371ca mt76: set txwi_size according to the driver value 5007326 mt76: add skb pointer to mt76_tx_info c47a568 mt76: dma: introduce skb field in mt76_txwi_cache 9029560 mt76: dma: add skb check for dummy pointer e9eea39 mt76: mt7615: use sizeof instead of sizeof_field 98c5359 Revert "mt76: fix potential deadlock on cancelling workqueues" bc9baa7 mt76x02u: remove bogus stop on suspend 6c1cab9 mt76usb: fix tx/rx stop 0e674c5 mt76x02: remove bogus mutex usage 59f7bb6 Revert "mt76: mt76x02: send no-skb tx status without holding the status lock" b0f2a30 mt76x02: avoid status_list.lock and sta->rate_ctrl_lock dependency 62054de mt76: mt7603: remove query from mt7603_mcu_msg_send signature e79d96a mt76: mt7603: use standard signature for mt7603_mcu_msg_send be8f039 mt76: mt7603: initialize mt76_mcu_ops data structure 9a9c656 mt76: introduce mt76_mcu_restart macro 980b91e mt76: mt7603: init mcu_restart function pointer a97db3f mt76: mt7603: run __mt76_mcu_send_msg in mt7603_mcu_send_firmware 151115f mt76: mt76x02: mt76x02_poll_tx() can be static 7391f98 mt76: fix endianness sparse warnings 6c06f73 mt76: mt7603: report firmware version using ethtool f06647e mt76: usb: use EP max packet aligned buffer sizes for rx f43fccf mt76: move beacon_int in mt76_dev 74ab2cf mt76: move beacon_mask in mt76_dev 23c2f94 mt76: add TX/RX antenna pattern capabilities 6e790e1 mt76: move pre_tbtt_tasklet in mt76_dev 7606c08 mt76: mt7603: enable/disable pre_tbtt_tasklet in mt7603_set_channel ff22eee mt76: do not enable/disable pre_tbtt_tasklet in scan_start/scan_complete 3157385 mt76: mt7603: dynamically alloc mcu req in mt7603_mcu_set_eeprom cc674e2 mt76: mt76x02: remove useless return in mt76x02_resync_beacon_timer 6b18427 mt76: move tx_napi in mt76_dev bce63c4 mt76: mt7603: use napi polling for tx cleanup 4afd89e mt76: mt7615: use napi polling for tx cleanup 2cb4683 mt76: move netif_napi_del in mt76_dma_cleanup b4ceb9f mt76: Fix a signedness bug in mt7615_add_interface() d00dc95 mt76: mt7615: Use after free in mt7615_mcu_set_bcn() 4e0ccc6 mt76: mt7615: Make mt7615_irq_handler static 0fd552a mt7615: mcu: simplify __mt7615_mcu_set_wtbl 50f7094 mt7615: mcu: simplify __mt7615_mcu_set_sta_rec 4434d04 mt7615: mcu: remove bss_info_convert_vif_type routine 083fbb9 mt7615: mcu: use proper msg size in mt7615_mcu_add_wtbl_bmc f61ca80 mt7615: mcu: use proper msg size in mt7615_mcu_add_wtbl 35bd12d mt7615: mcu: unify mt7615_mcu_add_wtbl_bmc and mt7615_mcu_del_wtbl_bmc f8f990b mt7615: mcu: remove unused parameter in mt7615_mcu_del_wtbl 965bca1 mt7615: remove query from mt7615_mcu_msg_send signature 9b9ca18 mt7615: remove dest from mt7615_mcu_msg_send signature 935b7e5 mt7615: mcu: remove skb_ret from mt7615_mcu_msg_send 2442db4 mt7615: mcu: unify __mt7615_mcu_set_dev_info and mt7615_mcu_set_dev_info 645bc45 mt7615: mcu: do not use function pointers whenever possible 40c4201 mt7615: mcu: remove unused structure in mcu.h a8834a2 mt7615: mcu: use standard signature for mt7615_mcu_msg_send 824d25c mt7615: initialize mt76_mcu_ops data structure d943427 mt7615: mcu: init mcu_restart function pointer c2211e4 mt7615: mcu: run __mt76_mcu_send_msg in mt7615_mcu_send_firmware cb63a06 mt76: mt7603: stop mac80211 queues before setting the channel c6aaa3a mt76: mt7615: rearrange cleanup operations in mt7615_unregister_device 97609f3 mt76: mt7615: add static qualifier to mt7615_rx_poll_complete f9dadd2 mt76: mt7603: add debugfs knob to enable/disable edcca 89cda5d mt7603: fix reading target tx power from eeprom 77d0e33 mt76: fix setting chan->max_power f575da2 mt76: mt76x02: fix tx status reporting issues a5d18dc mt76: mt76x02: fix tx reordering on rate control probing without a-mpdu bd32a93 mt76: mt76x02: remove enable from mt76x02_edcca_init signature 18386ee mt76: mt76x2u: remove mt76x02_edcca_init in mt76x2u_set_channel da3514f mt76: mt76x2: move mutex_lock inside mt76x2_set_channel 0d4719c mt76: mt76x02: run mt76x02_edcca_init atomically in mt76_edcca_set fd5af73 mt76: mt76x02: fix edcca file permission a0f51f2 mt76: mt7615: do not process rx packets if the device is not initialized 753cdee mt76: mt7615: stop mcu first in mt7615_unregister_device 899efe7 mt76: move mt76_insert_ccmp_hdr in mt76-module 6960b6e mt76: mt7615: add support for mtd eeprom parsing 4bcb057 mt76: mt7615: select wifi band according to eeprom 866f2c6 mt76: generalize mt76_get_txpower for 4x4:4 devices 514fb04 mt76: mt7615: add the capability to configure tx power ced9d43 mt76: mt7615: init get_txpower mac80211 callback 8abd502 mt76: mt7615: rearrange locking in mt7615_config 5b9b62e mt76: move mt76_get_rate in mt76-module 661c7c8 mt76: Remove set but not used variables 'pid' and 'final_mpdu' f072c7b mt76: mt7615: enable support for mesh 28d9496 mt76: mt7615: fix slow performance when enable encryption 827b9ad mt76: mt7615: remove unused variable in mt7615_mcu_set_bcn 34eea14 mt76: mt7615: remove key check in mt7615_mcu_set_wtbl_key 2bfae5a mt76: usb: fix rx A-MSDU support b033532 mt76: usb: do not always copy the first part of received frames 3e7fc15 mt76x02: fix reporting of non-probing frames with tx status requested 0d5caea Revert "mt76: usb: do not always copy the first part of received frames" 335e8c6 Revert "mt76: usb: fix rx A-MSDU support" 47ddf4b mt76: revert support for TX_NEEDS_ALIGNED4_SKBS 0b6520b mt7603: rework and fix tx status reporting 539b679 mt7603: improve hardware rate switching configuration d86d6ef mt76x0: fix RF frontend initialization for external PA f476a14 mt76x02: fix endian issue in tx status reporting patch f8d0517 mt76: mt7615: simplify mt7615_mcu_set_sta_rec routine 73ff45f mt76: mt7615: add support for per-chain signal strength reporting 9b67ae6 mt76: mt7615: init per-channel target power 160fdc0 mt76: mt7615: take into account extPA when configuring tx power 2211d93 mt76: mt76x02u: fix sparse warnings: should it be static? 3750533 mt76: mt7615: fix incorrect settings in mesh mode c37c1ca mt76: mt7615: update peer's bssid when state transition occurs 9dd1089 mt76: mt76u: reduce rx memory footprint 0789f45 mt76: mt7615: remove cfg80211_chan_def from mt7615_set_channel signature 2dca431 mt76: move nl80211_dfs_regions in mt76_dev data structure 3386ccf mt76: mt76u: get rid of {out,in}_max_packet d680ab0 mt76: usb: fix rx A-MSDU support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add rate control support for 4 spatial streams, improve precisionFelix Fietkau2019-06-252-0/+267
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath79: Code style improvements in 10_fix_wifi_macAdrian Schmutzler2019-06-251-4/+4
| | | | | | This fixes one comparison and several useless echos. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-08 06:02:12 +0000