aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mpc85xx: provide label MAC addressAdrian Schmutzler2019-09-192-0/+2
| | | | | | | This patch adds the label MAC address for some devices in mpc85xx. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: provide label MAC addressAdrian Schmutzler2019-09-1954-12/+123
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the label MAC address for several devices in ath79. Some devices require setting the MAC address in 02_network: For the following devices, the netif device can be linked in device tree, but the MAC address cannot be read: - alfa-network,ap121f - avm,fritz300e - ubnt-xm devices For the following devices, label MAC address is tied to lan or wan, so no node to link to exists in device tree: - adtran,bsap1800-v2 - adtran,bsap1840 - dlink,dir-842-c1/-c2/-c3 - engenius,ecb1750 - iodata,etg3-r - iodata,wn-ac1167dgr - iodata,wn-ac1600dgr - iodata,wn-ac1600dgr2 - iodata,wn-ag300dgr - nec,wg800hp - nec,wg1200cr - trendnet,tew-823dru Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: provide option to specify label MAC address in board.dAdrian Schmutzler2019-09-193-0/+14
| | | | | | | | | | | | | | For many devices, MAC addresses cannot be retrieved via the device tree alias. To still provide the label MAC address for those, this implements a second mechanism that will put the address into uci config. Note that this stores the actual MAC address, whereas in DTS we reference the bearing device. This is based on the work of Rosy Song <rosysong@rosinson.com> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: add function to retrieve label MAC addressAdrian Schmutzler2019-09-191-0/+10
| | | | | | | | | | | | | | | | To refer to the MAC address on a device's label, one can specify the alias label-mac-device in the DTS which should point to the bearer of the corresponding MAC address. With the function get_mac_label, the user can retrieve then retrieve this address and use it as a value that uniquely identifies his device. This is severely helpful for several downstream functionalities, e.g. define MAC addresses of custom netifs or change the SSID to be easily recognizable. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* curl: bump to 7.66.0Hans Dedecker2019-09-192-4/+4
| | | | | | | | | | Refresh patches, for changes in version 7.66.0 see https://curl.haxx.se/changes.html#7_66_0 Fixes CVEs: CVE-2019-5481 CVE-2019-5482 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* openssl: bump to 1.1.1dEneas U de Queiroz2019-09-1912-2524/+223
| | | | | | | | | | | | | This version fixes 3 low-severity vulnerabilities: - CVE-2019-1547: ECDSA remote timing attack - CVE-2019-1549: Fork Protection - CVE-2019-1563: Padding Oracle in PKCS7_dataDecode and CMS_decrypt_set1_pkey Patches were refreshed. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* brcm2708: add support for Hifiberry DAC+DSPÁlvaro Fernández Rojas2019-09-191-0/+20
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: add support for Raspberry Pi 2B 1.2Álvaro Fernández Rojas2019-09-193-5/+18
| | | | | | RPi 2B 1.2 has a BCM2710/BCM2837 like RPi 3 devices. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: update to latest patches from RPi foundationÁlvaro Fernández Rojas2019-09-19806-1570/+3639
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708-gpu-fw: update to latest firmwareÁlvaro Fernández Rojas2019-09-191-15/+15
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: 4.19: fix crash when setting up spi-gpioDENG Qingfang2019-09-191-0/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If an spi-gpio was specified with num-chipselects = <0> in dts, kernel will crash: Unable to handle kernel paging request at virtual address 32697073 pgd = (ptrval) [32697073] *pgd=00000000 Internal error: Oops: 5 [# 1] SMP ARM Modules linked in: CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.19.72 #0 Hardware name: Generic DT based system PC is at validate_desc+0x28/0x80 LR is at gpiod_direction_output+0x14/0x128 ... [<c0544db4>] (validate_desc) from [<c0545228>] (gpiod_direction_output+0x14/0x128) [<c0545228>] (gpiod_direction_output) from [<c05fa714>] (spi_gpio_setup+0x58/0x64) [<c05fa714>] (spi_gpio_setup) from [<c05f7258>] (spi_setup+0x12c/0x148) [<c05f7258>] (spi_setup) from [<c05f7330>] (spi_add_device+0xbc/0x12c) [<c05f7330>] (spi_add_device) from [<c05f7f74>] (spi_register_controller+0x838/0x924) [<c05f7f74>] (spi_register_controller) from [<c05fa494>] (spi_bitbang_start+0x108/0x120) [<c05fa494>] (spi_bitbang_start) from [<c05faa34>] (spi_gpio_probe+0x314/0x338) [<c05faa34>] (spi_gpio_probe) from [<c05a844c>] (platform_drv_probe+0x34/0x70) The cause is spi_gpio_setup() did not check if the spi-gpio has chipselect pins before setting their direction and results in derefing an invalid pointer. The bug is spotted in kernel 4.19.72 and does not occur in 4.14. There is a similar fix upstream in kernel 5.2 in commit 249e2632dcd0 ("spi: gpio: Don't request CS GPIO in DT use-case"). Ref: https://patchwork.kernel.org/patch/11150619/ Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> [use upstream patch, moved from hack to pending dir, commit facelift] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* procd: fix invalid JSON filter expression in procd_running()Jo-Philipp Wich2019-09-192-2/+2
| | | | | | | | | Since service and instance names may contain characters which are not allowed in JSON path labels, such as dashes or spaces, change the filter expression to array square bracket notation to properly match these cases as well. Fixes: 2c3dd70741 ("procd: add procd_running() helper for checking running state") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* firewall: update to latest Git HEADJo-Philipp Wich2019-09-181-3/+3
| | | | | | | 383eb58 ubus: do not overwrite ipset name attribute Ref: https://forum.openwrt.org/t/fw3-ipset-procd-objects/44044 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* procd: update to the latest git HEADRafał Miłecki2019-09-181-3/+3
| | | | | | | 62dc8c0 system: sysupgrade: send reply on error 2710c65 system: refuse sysupgrade with backup if it's unsupported Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* glibc: update to latest 2.27 commit (BZ#23637)Hans Dedecker2019-09-171-2/+2
| | | | | | | | | | | | 5b4f7382af Add undef to fix test failure. 9456483fb2 Improve performance of memmem 373f8b06a3 Improve performance of strstr 4ec1b9e913 Fix strstr bug with huge needles (bug 23637) ecd6271ed8 Speedup first memmem match bba6b9288f Simplify and speedup strstr/strcasestr first match 7a4da6ef7a Improve strstr performance Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ath79: add support for TP-Link Archer C59v2Keith Maika2019-09-165-1/+102
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add ath79 support for Archer C59v2, previously supported by ar71xx. TP-Link Archer C59v2 is a dual-band AC1350 router based on Qualcomm/Atheros QCA9561+QCA9886 chips. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - UART header on PCB Flash instruction: - via web UI: 1. Download openwrt-ath79-generic-tplink_archer-c59-v2-squashfs-factory.bin 2. Login to router and open the Advanced tab 3. Navigate to System Tools -> Firmware Upgrade 4. Upload firmware using the Manual Upgrade form - via TFTP: 1. Set PC to fixed ip address 192.168.0.66 2. Download openwrt-ath79-generic-tplink_archer-c59-v2-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Keith Maika <keithm@aoeex.com>
* ath79: move common definitions from Archer C58/C59 to common DTSIAdrian Schmutzler2019-09-163-143/+74
| | | | | | | | | The Archer C58/C59 have redundant LED and MAC address definitions in their DTS files. This moves them to the parent DTSI file. The patch already accounts for the upcoming Archer C59 v2. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* brcm47xx: sysupgrade: support Luxul firmware formatDan Haab2019-09-161-0/+82
| | | | | | Allow flashing Luxul devices using vendor firmware format. Signed-off-by: Dan Haab <dan.haab@legrand.com>
* bcm53xx: sysupgrade: support Luxul firmware formatDan Haab2019-09-161-0/+84
| | | | | | | Allow flashing Luxul devices using vendor firmware format. The next step will be building proper images once they are conirmed to work. Signed-off-by: Dan Haab <dan.haab@legrand.com>
* download.dl: fix @KERNEL mirror urlsYousong Zhou2019-09-161-4/+4
| | | | | | | - Prepend "/pub" for mirror.rackspace.com - Use https for download.xs4all.nl and mirrors.mit.edu Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* mac80211: brcmfmac: backport the last 5.4 changesRafał Miłecki2019-09-164-1/+413
| | | | | | | This makes brcmfmac use the same wiphy after PCIe reset to help user space handle corner cases (e.g. firmware crash). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ar71xx: fix typo in platform_do_upgrade_compex()Rafał Miłecki2019-09-161-1/+1
| | | | | Fixes: 641f6b6c26cb ("treewide: use new procd sysupgrade $UPGRADE_BACKUP variable") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: enable mtk_efuse by defaultLorenzo Bianconi2019-09-151-1/+1
| | | | | | | Enable by default mtk_efuse driver since it needed by mtk_thermal driver to read sensor calibration data Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
* ath79: eg200: enable status led usageKarl Palsson2019-09-152-2/+4
| | | | | | | | | This enables using the "eTactica" LED during boot, to indicate failsafe, and during upgrade, while still leaving the LED alone for normal operation. This brings the device more in line with how other devices work, and makes the failsafe functionality easier to use and understand. Signed-off-by: Karl Palsson <karlp@etactica.com>
* firewall: update to latest git HEADPetr Štetiar2019-09-151-3/+3
| | | | | | c26f8907d1d2 firewall3: fix typo that affects ICMPv6 rules with numeric icmp_type Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath10k-ct: update to version 2019-09-09Robert Marko2019-09-159-18/+18
| | | | | | | | | Update the ath10k-ct driver version to 5e8cd86f90dac966d12df6ece84ac41458d0e95f to enable dynamic VLANs to work. Patches refreshed during the bump. Signed-off-by: Robert Marko <robimarko@gmail.com> [commit description facelift] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath10k-firmware: update Candela Tech firmware imagesRobert Marko2019-09-151-20/+20
| | | | | | | This enables a feature flag in the wave-2 firmware wmi-services indicating it can send software-encrypted raw frames. This should in turn allow the AP-VLAN feature to work. Signed-off-by: Robert Marko <robimarko@gmail.com>
* scons: move to packages feedPetr Štetiar2019-09-155-85/+1
| | | | | | | | | | | | | | This patch removes scons host build tool, as commit 7087efd72a8d ("scons: move host build tool to a proper place") in the packages feed has moved scons into the new home. There are currently no packages in the master tree which would need scons, yet scons is build always as part of host tools, just in order to satisfy host build dependency of few packages in the packages feeds. Ref: https://github.com/openwrt/packages/pull/9584 Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* netifd,lldpd,rpcd,log: use generic service_runningPetr Štetiar2019-09-154-17/+0
| | | | | | | | | | | | | | | | | | commit eb204d14f75c ("base-files: implement generic service_running") introduced generic service_running so it's not needed to copy&paste same 3 lines over and over again. I've removed service_running from netifd/network init script as well, because it was not working properly, looked quite strange and I didn't understand the intention: $ /etc/init.d/network stop $ service network running && echo "yes" || echo "nope" ( have to wait for 30s ) Command failed: Request timed out yes Signed-off-by: Petr Štetiar <ynezz@true.cz>
* base-files,procd: add generic service statusLuiz Angelo Daros de Luca2019-09-152-1/+35
| | | | | | | | | | | | | | Adds a default status action for init.d scripts. procd "service status" will return: 0) for loaded services (even if disabled by conf or dead) 3) for inactive services 4) when filtering a non-existing instance Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> [rebased, cleaned up] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* base-files: implement generic service_runningPetr Štetiar2019-09-151-1/+6
| | | | | | | DRY is good, otherwise we're going to suffer with a copy&paste disease in the init scripts. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* odhcpd: update to latest git HEADHans Dedecker2019-09-151-3/+3
| | | | | | | | 1d24009 netlink: rename netlink callback handlers 91a28e4 ndp: answer global-addressed NS manually fd93e36 dhcpv6: retry failed PD assignments on addrlist change Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ramips: add SD-Card support for Linkit Smart 7688Ivan Hörler2019-09-151-1/+1
| | | | | | The Linkit Smart 7688 has a SD-Card reader that does not work with the official build of openwrt. Adding kmod-sdhci-mt7620 makes it working. Signed-off-by: Ivan Hörler <i.hoerler@me.com>
* ramips: only add spidev node in for WrtNode2R (and not for 2P)Daniel Golle2019-09-152-8/+10
| | | | | | | | Only the 2R version got the STM32 uC connected as 2nd SPI device. Hence move the spidev node from mt7628an_wrtnode_wrtnode2.dtsi to mt7628an_wrtnode_wrtnode2r.dts. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* scripts/feeds: fix accepting "-" in feed type stringFelix Fietkau2019-09-151-1/+1
| | | | | | Fixes a syntax error in processing the type src-git-full Signed-off-by: Felix Fietkau <nbd@nbd.name>
* apm821xx: image: remove unused kernel.dtb from IMAGESYousong Zhou2019-09-151-1/+1
| | | | | | | It's a leftover from 2271967f ("apm821xx: utilize build ARTIFACTs") Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Acked-by: Christian Lamparter <chunkeey@gmail.com>
* imx6: install-dtb as separate IMAGEYousong Zhou2019-09-151-4/+6
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* build: install-dtb: fix race condition when copying dtbYousong Zhou2019-09-151-4/+7
| | | | | | | | | | | | | | | | Currently for at91 target, Build/install-dtb can be triggered concurrently for multiple different TARGET_FILESYSTEMS, cp command can fail when the target file is already open exclusively by other cp process [ -f /builder/shared-workdir/build/build_dir/target-arm_arm926ej-s_musl_eabi/linux-at91_sam9x/at91sam9263ek-uImage -a -f /builder/shared-workdir/build/build_dir/target-arm_arm926ej-s_musl_eabi/linux-at91_sam9x/root.ubifs+fs=-m_2048_-e_126KiB_-c_2048+pkg=68b329da ] [ -f /builder/shared-workdir/build/build_dir/target-arm_arm926ej-s_musl_eabi/linux-at91_sam9x/at91sam9263ek-uImage -a -f /builder/shared-workdir/build/build_dir/target-arm_arm926ej-s_musl_eabi/linux-at91_sam9x/root.ext4+pkg=68b329da ] cp -fpR /builder/shared-workdir/build/build_dir/target-arm_arm926ej-s_musl_eabi/linux-at91_sam9x/linux-4.14.141/arch/arm/boot/dts/at91sam9263ek.dtb /builder/shared-workdir/build/bin/targets/at91/sam9x/openwrt-at91-sam9x-at91sam9263ek.dtb; cp -fpR /builder/shared-workdir/build/build_dir/target-arm_arm926ej-s_musl_eabi/linux-at91_sam9x/linux-4.14.141/arch/arm/boot/dts/at91sam9263ek.dtb /builder/shared-workdir/build/bin/targets/at91/sam9x/openwrt-at91-sam9x-at91sam9263ek.dtb; cp: cannot create regular file '/builder/shared-workdir/build/bin/targets/at91/sam9x/openwrt-at91-sam9x-at91sam9263ek.dtb': File exists Makefile:87: recipe for target '/builder/shared-workdir/build/build_dir/target-arm_arm926ej-s_musl_eabi/linux-at91_sam9x/tmp/openwrt-at91-sam9x-at91sam9263ek-ubifs-dtb' failed make[4]: *** [/builder/shared-workdir/build/build_dir/target-arm_arm926ej-s_musl_eabi/linux-at91_sam9x/tmp/openwrt-at91-sam9x-at91sam9263ek-ubifs-dtb] Error 1 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: make IRQ fixes target specificKoen Vandeputte2019-09-142-57/+0
| | | | | | | | | | | | | Move the IRQ fix from generic to ar71xx specific. Other targets like ath79 have specific pathes to delete this code. This resulted in a build failure on ath79 While at it, wipe the 4.19 version, as ar71xx will never reach this. Fixes: 530f76708cef ("ar71xx: Fix potentially missed IRQ handling during dispatch") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* brcm63xx: remove redundant variable definition in MakefileAdrian Schmutzler2019-09-141-3/+0
| | | | | | | | For devices inheriting from bcm63xx_netgear, the IMAGES variable is overwritten with the same values as defined in the parent definition. So, remove the unnecessary overwrite. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* images: fix boot failures on NAND with small sub pagesJonas Gorski2019-09-143-16/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SquashFS has a minimum block size of at least 1k, so we need to make sure the last data block is also at least that big. This is not an issue on NOR or SD CARD devices, since their rootfs partitions go all the way to the end of the usable space. But on NAND with ubiblock, the rootfs partition will be the exact space, rounded up to LEB size. Unfortunately, some NAND chips with small sub pages have a LEB size of x.5 kiB. This can cause the the last data block to be less than 1k, which will cause the last block to be inaccessible, causing boot failures as seen on MR24: [ 1.532960] block ubiblock0_3: created from ubi0:3(rootfs) [ 1.538457] ubiblock: device ubiblock0_3 (rootfs) set to be root filesystem [ 1.552847] SQUASHFS error: squashfs_read_data failed to read block 0x621472 [ 1.559896] squashfs: SQUASHFS error: unable to read id index table [ 1.566474] VFS: Cannot open root device "(null)" or unknown-block(254,0): error -5 Since on most NOR devices, the start of the squashfs partition is not aligned. Since the start of the rootfs_data partition there is dependend on the SquashFS size, we cannot just always pad it, as the padding could creep into the rootfs_data partition, breaking jffs2. So fix this by ensuring a squashfs rootfs is always a multiple of 1k only for UBI and NAND sysupgrade images. Fixes #2460 without affecting NOR devices. Tested-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ar71xx: fix potential IRQ misses during dispatch for qca953xKoen Vandeputte2019-09-131-0/+27
| | | | | | | | | | | If both interrupts are set in the current implementation only the 1st will be handled and the 2nd will be skipped due to the "if else" condition. Fix this by using the same approach as done for QCA955x just below it. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: Fix potentially missed IRQ handling during dispatchKoen Vandeputte2019-09-132-0/+114
| | | | | | | | | | | If both interrupts are set in the current implementation only the 1st will be handled and the 2nd will be skipped due to the "if else" condition. Fix this by using the same approach as done for QCA955x just below it. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.19 to 4.19.72Koen Vandeputte2019-09-134-297/+7
| | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 390-v5.3-net-sched-fix-action-ipt-crash.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.143Koen Vandeputte2019-09-133-293/+3
| | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 390-v5.3-net-sched-fix-action-ipt-crash.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.192Koen Vandeputte2019-09-136-9/+9
| | | | | | | | | Refreshed all patches. Compile-tested on: none Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* odhcpd: fix update to git HEADHans Dedecker2019-09-121-2/+2
| | | | | | | | | | | | | | | | Fixes commit 7ff5b12e90 e73bf11 config: ra_management compatibility support d818380 odhcpd: router: Fix out of scope memory access 94a1c94 dhcpv6-ia: free assignment when validity timer expires 752fc2c router: speed up initial router advertisements 09aa022 router: close socket upon NETEV_IFINDEX_CHANGE fixed 79eb160 router: fix previous commit 6034b5c router: close socket upon NETEV_IFINDEX_CHANGE 000182f router: fix lingering uloop socket descriptor f6c2242 router: support ra_lifetime being 0 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* umbim: update to latest git HEADIngo Feinerer2019-09-121-3/+3
| | | | | | 184b707 umbim: add home provider query support Signed-off-by: Ingo Feinerer <feinerer@logic.at>
* odhcpd: update to latest git HEAD (FS#2019)Hans Dedecker2019-09-122-2/+5
| | | | | | | | | | | | | | | | | e73bf11 config: ra_management compatibility support d818380 odhcpd: router: Fix out of scope memory access 94a1c94 dhcpv6-ia: free assignment when validity timer expires 752fc2c router: speed up initial router advertisements 09aa022 router: close socket upon NETEV_IFINDEX_CHANGE fixed 79eb160 router: fix previous commit 6034b5c router: close socket upon NETEV_IFINDEX_CHANGE 000182f router: fix lingering uloop socket descriptor f6c2242 router: support ra_lifetime being 0 d111809 router: make RA flags configurable (FS#2019) Update odhcpd defaults according to the new RA flags implementation Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mt76: probe load mt7615 driver asynchronouslyFelix Fietkau2019-09-121-0/+1
| | | | | | It can take a long time to load the firmware Signed-off-by: Felix Fietkau <nbd@nbd.name>