aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* armvirt: 5.4: kconfig syncYousong Zhou2020-03-103-25/+78
| | | | | | | "make kernel_menuconfig CONFIG_TARGET=subtarget_platform" first, then move common ones to platform level config Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* armvirt: add config-5.4Yousong Zhou2020-03-103-0/+547
| | | | | | Copied from config-4.19 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: 5.4: remove some dup config options already set in genericYousong Zhou2020-03-105-25/+0
| | | | | | | This furthers 860652f4b9da ("kernel: 5.4: move some kconfig options to generic") Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* malta: switch to kernel 5.4 by defaultYousong Zhou2020-03-101-1/+1
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* malta: fix missing watchdog core dependency for hwmon-sch5627Petr Štetiar2020-03-101-0/+1
| | | | | | | | | | | | | | | | | | | Fixes following error uncovered while building malta/be on 5.4: Package kmod-hwmon-sch5627 is missing dependencies for the following libraries: watchdog.ko That dependency was introduced in upstream via 2d8c7ff52c24 ("hwmon/sch56xx: Depend on watchdog for watchdog core functions") in v3.5. The issue emerged in 5.4 because the kconfig symbol CONFIG_WATCHDOG_CORE is now a tristate value. Previously it was a bool Cc: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> (drop the config-4.19 change. reword about the cause)
* malta: update kernel config-5.4Yousong Zhou2020-03-101-21/+29
| | | | | | | | With malta/be selected make kernel_menuconfig CONFIG_TARGET=subtarget_platform Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* malta: add kernel 5.4 configYousong Zhou2020-03-101-0/+336
| | | | | | Copied from config-4.19 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: 5.4: move some kconfig options to genericYousong Zhou2020-03-1015-80/+9
| | | | | | | | | | | CONFIG_64BIT_TIME=y CONFIG_KASAN_STACK=1 CONFIG_UBSAN_ALIGNMENT=y CONFIG_UNIX_SCM=y CONFIG_DMA_DECLARE_COHERENT=y CONFIG_OF_RESERVED_MEM=y Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ramips: add support for TP-Link RE210 v1Christoph Krapp2020-03-095-89/+205
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: MediaTek MT7620A RAM: 64MB FLASH: 8MB SPI WLAN: 2G: MediaTek MT7620A 5G: MediaTek MT7610EN ETH: 1x 10/100/1000M (Atheros AR8035) LED: RSSI (orange/green) WiFi 2G (green) WiFi 5G (green) Power (green) System (red / green) BTN: Power Reset LED WPS Serial ------ P1 - Tx P2 - Rx P3 - GND P4 - VCC Pin 4 is the one closest to the LAN port. MAC overview ------------ WAN *:4c uboot 0x1fc00 2.4 *:4c uboot 0x1fc00 5 *:4e uboot 0x1fc00 +2 Installation ------------ Web interface: It is possible to upgrade to OpenWrt via the web interface. However, the OEM firmware upgrade file is required and a tool to fix the MD5 sum of the header. This procedure overwrites U-Boot and there is not failsafe / recovery mode present! To prepare an image, you need to take the header and U-Boot (i.e. 0x200 + 0x20000 bytes) from an OEM firmware file and attach the factory image to it. Then fix the header MD5Sum1. Serial/TFTP: You can use initramfs for booting via RAM or flash the image directly. Additional Notes: If the web interface upgrade fails, you have to open your device and attach serial console. Since the web upgrade overwrites the boot loader, you might also brick your device. In order to flash back to stock, the first header and U-Boot needs to be stripped from the original firmware. Signed-off-by: Christoph Krapp <achterin@googlemail.com> [change rssi LED labels] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.24Koen Vandeputte2020-03-0946-173/+130
| | | | | | | | | Refreshed all patches. Compile-tested on: imx6 Runtime-tested on: imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.19 to 4.19.108Koen Vandeputte2020-03-0923-89/+55
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.172Koen Vandeputte2020-03-0910-15/+15
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: kmod-fs-exfat: fix typo LINUX_4_{,1}4Yousong Zhou2020-03-091-1/+1
| | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Reported-by: Petr Štetiar <ynezz@true.cz>
* kernel: add exFAT fs driverDENG Qingfang2020-03-091-0/+24
| | | | | | | | | This was available since kernel 5.4. The one provided in packages feed will be considered deprecated and renamed to kmod-fs-exfat0. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> (use name kmod-fs-exfat. use "@!(LINUX_4_4||LINUX_4_19)" for dependency)
* kernel: backport mtd partition address fix sent upstreamRafał Miłecki2020-03-096-6/+87
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* octeontx: add support for Linux 5.4Tim Harvey2020-03-096-0/+947
| | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> [add KERNEL_TESTING_PATCHVER] Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: 5.4: backport led register fixSungbo Eo2020-03-091-0/+36
| | | | | | Fixes issues with loading trigger-sources for usbport trigger from DTS. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ipq40xx: add support for 8devices Habanero DVKRobert Marko2020-03-0910-2/+765
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the 8devices Habanero development board. Specs are: CPU: QCA IPQ4019 RAM: DDR3L 512MB Storage: 32MB SPI-NOR and optional Parallel SLC NAND(Some boards ship with it and some without) WLAN1: 2.4 GHz built into IPQ4019 (802.11n) 2x2 WLAN2: 5 GHz built into IPO4019 (802.11ac Wawe-2) 2x2 Ethernet: 5x Gbit LAN (QCA 8075) USB: 1x USB 2.0 and 1x USB 3.0 (Both built into IPQ4019) MicroSD slot (Uses SD controller built into IPQ4019) SDIO3.0/EMMC slot (Uses the same SD controller) Mini PCI-E Gen 2.0 slot (Built into IPQ4019) 5x LEDs (4 GPIO controllable) 2x Pushbutton (1 is connected to GPIO, other to SoC reset) LCD ZIF socket (Uses the LCD controller built into IPQ4019 which has no driver support) 1x UART 115200 rate on J18 2x breakout development headers 12V DC Jack for power DIP switch for bootstrap configuration Installation instructions: Since boards ship with vendors fork of OpenWrt sysupgrade can be used. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq40xx: add IPQ4019 SD/MMC controller supportRobert Marko2020-03-0919-44/+521
| | | | | | | | | | This commit finally adds support for the built in SD/MMC controller in IPQ4019 SoC. Controller is supported by the upstream SDHCI-MSM driver with a minor clock setting patch. Patch is special to the IPQ4019 and cannot be upstreamed. LDO and SDHCI node are upstreamed, and LDO node is awaiting to be accepted. Signed-off-by: Robert Marko <robimarko@gmail.com>
* oxnas: restore accidentally moved fileDaniel Golle2020-03-081-0/+0
| | | | | | renamed: files-4.14/phy/phy-oxnas-pcie.c -> files-4.14/drivers/phy/phy-oxnas-pcie.c Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: fix lib-xor for ARM64Tim Harvey2020-03-081-2/+2
| | | | | | use LINUX_KARCH in directory path to avoid failures in non-arm targets. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* uboot-mxs: bump to v2020.01Michael Heimpold2020-03-082-15/+13
| | | | | | | | Also update the U-Boot BSP patch for I2SE Duckbill devices. Run tested on I2SE Duckbill and Olimex OLinuXino Maxi boards. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* uboot-envtools: mxs: add support for olimex, imx23-olinuxinoMichael Heimpold2020-03-082-1/+4
| | | | | | Add ubootenv uci config for Olimex OLinuXino boards. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* mxs: switch to kernel 5.4Michael Heimpold2020-03-082-1/+1
| | | | | | | | Compiled for and run-tested on - I2SE Duckbill board - Olimex OLinuXino Maxi board Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* imx6: 5.4: add missing kernel perf monitor symbolPetr Štetiar2020-03-081-0/+1
| | | | | | | | | | Add missing kernel config symbol probably some dependency uncovered by my local perf related and enabled kernel config options. ARM PMU framework (ARM_PMU) [Y/n/?] y Freescale i.MX8 DDR perf monitor (FSL_IMX8_DDR_PMU) [N/m/y/?] (NEW) Signed-off-by: Petr Štetiar <ynezz@true.cz>
* imx6: apalis: move set_blkcnt variable into recovery scriptPetr Štetiar2020-03-081-0/+1
| | | | | | | | | | | I've added `set_blkcnt` environment variable which is needed for every `mmc write` command as we need to always specify size in block count. That `set_blkcnt` variable was previously present in the U-Boot's default environment, but that needed patching U-Boot every time, so that patch was dropped with 2020.01 version bump. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* imx6: apalis: fix variables in bootscriptPetr Štetiar2020-03-081-3/+4
| | | | | | | | U-Boot 2020.01 has changed names for same variables, adjust the bootscript accordingly. Added boot_file variable as the default value is zImage. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-imx6: bump to 2020.01 and refresh patchesPetr Štetiar2020-03-086-154/+65
| | | | | | | | | | | | | | | | | Update U-Boot to latest release, remove `100-wandboard-enable-fit.patch` as FIT support was added in commit 5b8585825128 ("wandboard: Add FIT image support"). Rework `110-mx6cuboxi-mmc-fallback.patch` into two patches as there was new config option `CONFIG_SPL_FORCE_MMC_BOOT` added upstream which should provide the same functionality as the previous patch hunk. Moving Apalis towards generic distro_bootcmd. Cc: Vladimir Vid <vladimir.vid@sartura.hr> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* gpio-button-hotplug: remove duplicate logging textPetr Štetiar2020-03-081-3/+3
| | | | | | | | Removes one of the duplicate `gpio-keys` words found in the logs: gpio-keys gpio-keys: gpio-keysdoes not support key code:143 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: add kernel module for Sensirion SPS30 PMSPetr Štetiar2020-03-0811-0/+1211
| | | | | | | Adds into 4.19 backported kernel module from 5.1 for Sensirion SPS30 particulate matter sensor, for kernel 5.4 backported dependency fix. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: iio: split buffer modules into separate packagesPetr Štetiar2020-03-081-14/+42
| | | | | | | | | Otherwise we would need to enable IIO_TRIGGERED_BUFFER symbol in all kernels in order to be able to use any of the IIO modules which are utilizing triggered buffer based data acquisition method. Acked-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* linux: generic: 5.4: add missing config symbolsPetr Štetiar2020-03-081-0/+11
| | | | | | Those symbols popped up while building imx6 with all targets enabled. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* Revert "kernel: rewrite run_parsers_by_type() to use add_mtd_partitions()"David Bauer2020-03-073-15/+24
| | | | | | | | | | | | | | This reverts commit 15a0701cdde8eeae2a54880b813cdb8cdc09a384. It was reported that this patch breaks on some cases the JFFS2 overlay filesystem on targets still using kernel 4.14. This includes ar71xx, where spurious erase of the ART was reported. Revert this commit for now. Re-adding should probaby also be done for every currently supported kernel version. Ref: FS#2837 FS#2862 FS#2864 Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: fix indent for wrapped lines in image/nand.mkAdrian Schmutzler2020-03-071-3/+3
| | | | | | | This applies the common indent (one tab) for the wrapped lines of domywifi_dw33d and glinet_gl-ar750s-nor-nand. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mac80211: fix symbol dependency of rt2x00lib kernel moduleSven Over2020-03-071-2/+8
| | | | | | | | | | | | On platforms that do not have CONFIG_MTD enabled, loading the rt2x00lib kernel module fails because it depends on symbols from the mtd module ("Unknown symbol get_mtd_device_nm"). This commit disables the code that can read the eeprom from mtd if mtd is not enabled. Signed-off-by: Sven Over <sp@cedenti.st> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: restore accidentally modified patch for kernel 4.14Daniel Golle2020-03-071-4/+4
| | | | | | | patches-4.14/340-oxnas-pcie.patch was adapted for kernel 5.4 by accident. Revert that change to restore 4.14 builds. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: add support for Sitecom WLR-8100Davide Fioravanti2020-03-075-3/+216
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sitecom WLR-8100 v1 002 (marketed as X8 AC1750) is a dual band wireless router. Specification: - Qualcomm Atheros SoC QCA9558 - 128 MB of RAM (DDR2) - 16 MB of FLASH (Macronix MX25L12845EMI-10G - SPI NOR) - 5x 10/100/1000 Mbps Ethernet - 3T3R 2.4 GHz (QCA9558 WMAC) - 3T3R 5.8 Ghz (QCA9880-BR4A) - 1x USB 3.0 (Etron EJ168A) - 1x USB 2.0 - 9x LEDs - 2x GPIO buttons Everything working. Installation and restore procedure tested Installation 1. Connect to one of LAN (yellow) ethernet ports, 2. Open router configuration interface, 3. Go to Toolbox > Firmware, 4. Browse for OpenWrt factory image with dlf extension and hit Apply, 5. Wait few minutes, after the Power LED will stop blinking, the router is ready for configuration. Restore OEM FW (Linux only) 1. Download OEM FW from website (tested with WLR-8100v1002-firmware-v27.dlf) 2. Compile the FW for this router and locate the "mksenaofw" tool in build_dir/host/firmware-utils/bin/ inside the OpenWrt buildroot 3. Execute "mksenaofw -d WLR-8100v1002-firmware-v27.dlf -o WLR-8100v1002-firmware-v27.dlf.out" where: WLR-8100v1002-firmware-v27.dlf is the path to the input file (use the downloaded file) WLR-8100v1002-firmware-v27.dlf.out is the path to the output file (you can use the filename you want) 4. Flash the new WLR-8100v1002-firmware-v27.dlf.out file. WARNING: Do not keep settings. Additional notes. The original firmware has the following button configuration: - Press for 2s the 2.4GHz button: WPS for 2.4GHz - Press for 2s the 5GHz button: WPS for 5GHz - Press for 15s both 2.4GHz and 5GHz buttons: Reset I am not able to replicate this behaviour, so I used the following configuration: - Press the 2.4GHz button: RFKILL (disable/enable every wireless interfaces) - Press the 5GHz button: Reset Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
* ath79: add support for Devolo Magic 2 WIFIManuel Giganto2020-03-077-0/+207
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch support Devolo Magic 2 WIFI, board devolo_dlan2-2400-ac. This device is a plc wifi AC2400 router/extender with 2 Ethernet ports, has a G.hn PLC and uses LCMP protocol from Home Grid Forum. Hardware: SoC: AR9344 CPU: 560 MHz Flash: 16 MiB (W25Q128JVSIQ) RAM: 128 MiB DDR2 Ethernet: 2xLAN 10/100/1000 PLC: 88LX5152 (MaxLinear G.hn) PLC Flash: W25Q32JVSSIQ PLC Uplink: 1Gbps MIMO PLC Link: RGMII 1Gbps (WAN) WiFi: Atheros AR9340 2.4GHz 802.11bgn Atheros AR9882-BR4A 5GHz 802.11ac Switch: QCA8337, Port0:CPU, Port2:PLC, Port3:LAN1, Port4:LAN2 Button: 3x Buttons (Reset, wifi and plc) LED: 3x Leds (wifi, plc white, plc red) GPIO Switch: 11-PLC Pairing (Active Low) 13-PLC Enable 21-WLAN power MACs Details verified with the stock firmware: Radio1: 2.4 GHz &wmac *:4c Art location: 0x1002 Radio0: 5.0 GHz &pcie *:4d Art location: 0x5006 Ethernet &ethernet *:4e = 2.4 GHz + 2 PLC uplink --- *:4f = 2.4 GHz + 3 Label MAC address is from PLC uplink OEM SSID: echo devolo-$(grep SerialNumber /dev/mtd1 | grep -o ...$) OEM WiFi password: grep DlanSecurityID /dev/mtd1|tr -d -|cut -d'=' -f 2 Recommendations: Configure and link your PLC with OEM firmware BEFORE you flash the device. PLC configuration/link should remain in different memory and should work straight forward after flashing. Restrictions: PLC link detection to trigger plc red led is not available. PLC G.hn chip is not compatible with open-plc-tools, it uses LCMP protocol with AES-128 and requires different software. Notes: Pairing should be possible with gpio switch. Default configuration will trigger wifi led with 2.4Ghz wifi traffic and plc white led with wan traffic. Flash instruction (TFTP): 1. Set PC to fixed ip address 192.168.0.100 2. Download the sysupgrade image and rename it to uploadfile 3. Start a tftp server with the image file in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Allow 1-2 minutes for the first boot. Signed-off-by: Manuel Giganto <mgigantoregistros@gmail.com>
* ath79: add support for DomyWifi DW33DWeiDong Jia2020-03-075-0/+244
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit ports the device from ar71xx to the ath79 target and modifies the partition layout. 1. Firmware is installed to nand flash. 2. Modify the uboot-env parameter to boot from the nand flash. 3. The kernel size is extended to 5M. 4.nor flash retains the oem firmware. oem partition layout dev: size erasesize name mtd0: 00040000 00010000 "u-boot" mtd1: 00010000 00010000 "u-boot-env" mtd2: 00e30000 00010000 "rootfs" mtd3: 00170000 00010000 "kernel" mtd4: 00010000 00010000 "art" mtd5: 00f90000 00010000 "firmware" mtd6: 06000000 00020000 "rootfs_data" mtd7: 02000000 00020000 "backup" new partition layout dev: size erasesize name mtd0: 00040000 00010000 "u-boot" mtd1: 00010000 00010000 "u-boot-env" mtd2: 00fa0000 00010000 "oem-firmware" mtd3: 00010000 00010000 "art" mtd4: 00500000 00020000 "kernel" mtd5: 05b00000 00020000 "ubi" mtd6: 02000000 00020000 "oem-backup" MAC address overview: All mac addresses are stored in the art partition. eth0: 0x0 eth1: 0x6 ath9k: 0xc ath10k: 0x12 No valid addresses in 0x1002 and 0x5006. All addresses match the OEM firmware. Install from oem firmware. Enable ssh service: Connect to the router web, click professional, click system-startup, and add dropbear in the local startup input box. Click system-administration, delete ssh-key, and replace your ssh pub key. Restart the router. 1.Upload openwrt firmware to the device scp openwrt-snapshot-r11365-df60a0852c-ath79-nand-domywifi_dw33d-\ squashfs-factory.bin root@192.168.10.1:/tmp 2.modify uboot-env. ssh login to the device: fw_setenv bootcmd 'nboot 0x8050000 0;bootm || bootm 0x9fe80000' Run the fw_printenv command to check if the settings are correct. 3.Write openwrt firmware. ssh login to the device: mtd -r write /tmp/openwrt-snapshot-r11365-df60a0852c-ath79-nand-\ domywifi_dw33d-squashfs-factory.bin /dev/mtd6 The device will restart automatically and the openwrt firmware installation is complete. Restore oem firmware.just erase the kernel partition and the ubi partition. ssh login to the device: mtd erase /dev/mtd4 mtd -r erase /dev/mtd5 Reboot the device Signed-off-by: WeiDong Jia <jwdsccd@gmail.com> [alter flash instruction in commit message] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* oxnas: add 5.4 as testing kernel versionDaniel Golle2020-03-0623-19/+2205
| | | | | | | Add 5.4 kernel version as a new testing kernel option. Run-tested on Shuttle KD20, seems to work just as well as kernel 4.14. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: bump to 2.81rc2 + 2 localKevin Darbyshire-Bryant2020-03-063-2/+79
| | | | | | | | | Bump to dnsmasq 2.81rc2. In the process discovered several compiler warnings one with a logical error. 2 relevant patches sent upstream, added as 2 local patches for OpenWrt Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ath79: re-add accidentally dropped patch to kernel 5.4Daniel Golle2020-03-064-14/+281
| | | | | | | | Patch 0061-tty-serial-ar933x-uart-rs485-gpio.patch wasn't included when adding support for kernel 5.4. Re-add it and refresh patches. Fixes: 53ab9865c2 ("ath79: add support for kernel 5.4") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ncurses: update to 6.2DENG Qingfang2020-03-057-19/+19
| | | | | | Update ncurses to 6.2 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: increase spi-max-frequency to 50 MHz for D-Link DIR-810LAdrian Schmutzler2020-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Read times drop when increasing frequency to 25 MHz and 50 MHz, but not in between or for further increase. So, use 50 MHz as the lowest frequency with the fastest speed. Test results (thanks to Roger): The device reports a mx25l6405d flash chip. I tried all the maximum values in the devices' datasheet (Table 10. AC CHARACTERISTICS). All of them worked with and without "m25p,fast-read": > 10 MHz root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 1m 33.00s user 0m 0.01s sys 1m 7.56s > 25 MHz root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 0m 34.42s user 0m 0.02s sys 0m 23.58s > 25 MHz, fast read root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 0m 34.45s user 0m 0.02s sys 0m 23.59s > 33 MHz root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 0m 34.39s user 0m 0.00s sys 0m 23.60s > 33 MHz, fast read root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 0m 34.46s user 0m 0.01s sys 0m 23.62s > 50 MHz root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 0m 26.81s user 0m 0.01s sys 0m 18.25s > 50 MHz, fast read root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 0m 26.84s user 0m 0.00s sys 0m 18.25s > 66 MHz root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 0m 26.80s user 0m 0.01s sys 0m 18.23s > 66 MHz, fast read root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 0m 26.80s user 0m 0.02s sys 0m 18.23s > 86 MHz root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 0m 26.84s user 0m 0.01s sys 0m 18.24s > 86 MHz, fast read root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 0m 26.80s user 0m 0.02s sys 0m 18.23s Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* ramips: fix and tidy up DTS for D-Link DIR-810LAdrian Schmutzler2020-03-051-8/+10
| | | | | | | | | | | | | This patch addresses several issues for D-Link DIR-810L: - add correct button codes - harmonize button node names - use generic flash@0 - remove unused pin groups from state_default - improve sorting of properties Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* ramips: fix partition offset for D-Link DIR-810LAdrian Schmutzler2020-03-051-2/+2
| | | | | | | | | | | | | | The Jffs2 partition for the D-Link DIR-810L is currently off by 0x10000. Apply the correct offset based on the other partitions' size/offset and the information about stock OS from the Wiki. This is just based on the named information and _not_ verified on device. Fixes: 36e3424fa520 ("ramips: add support for dir810l and asus rp-n53") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* ipq806x: add newline at the end of qcom-ipq8064-v1.0.dtsiAdrian Schmutzler2020-03-051-1/+1
| | | | | | | The file does not have a newline at the end. Add it to apply to common style. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq40xx: fix support of EnGenius EAP2200Adrian Schmutzler2020-03-053-21/+21
| | | | | | | | | | | | This fixes a typo in the device string for MAC address setup in 02_network and corrects the indent in the device's DTS files. While at it, move the aliases section before the keys section to have it closer to the top of the file. Fixes: a736d912e2ba ("ipq40xx: add support for EnGenius EAP2200") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add support for NETGEAR R6700v2/AC2400Adrian Schmutzler2020-03-045-0/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SoC: MediaTek MT7621AT RAM: 256M DDR3 FLASH: 128M NAND WiFi: MediaTek MT7615N an+ac MediaTek MT7615N bgn ETH: MediaTek MT7621AT BTN: 1x Connect (WPS), 1x WLAN, 1x Reset LED: Power (white/amber), WAN(white/amber), 2.4G(white), 5G(white), USB(white) , GuestWifi(white) 4x LAN(white/amber), Wifi Button(white), WPS Button(white) Installation: Login to netgear webinterface and flash factory.img Based on a discontinued GitHub Pull Request by kuyokushin <codenamezero@protonmail.com> https://github.com/openwrt/openwrt/pull/2545 NOTE: Netgear R6700 v2 have five clones: R6900 v2, R7450, Nighthawk AC2400, Nighthawk AC2100 and already added R6800. Rest of them should be really easy supportable. Image for R6700v2 should work perfectly with them. Please refer: https://github.com/openwrt/openwrt/pull/2614 Tested-by: Víctor Gibrán <victorgibranmz@hotmail.com> [R6700v2] Tested-by: John Landrum <jl31m10@yahoo.com> [AC2400] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> [add guest led to mt7621_netgear_r6700-v2.dts end edit commit message] Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ramips: mt7621: add support for Netgear R6800Pawel Dembicki2020-03-047-0/+272
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Netgear R6800, aka Netgear AC1900 and R6800-100PES. Specification: - SoC: MediaTek MT7621AT (880 MHz) - Flash: 128 MiB NAND - RAM: 256 MiB - Wireless: MediaTek MT7615EN b/g/n , MediaTek MT7615EN an+ac - LAN speed: 10/100/1000 - LAN ports: 4 - WAN speed: 10/100/1000 - WAN ports: 1 - USB 2.0 - USB 3.0 - Serial baud rate of Bootloader and factory firmware: 57600 Known issues: - Device has 3 wifi LEDs: Wifi 5Ghz, Wifi 2.4Ghz and Wifi on/off. Wifi on/off is not used. Installation: - apply factory image via stock web-gui. Back to stock: - nmrpflash can be used to recover to the stock Netgear firmware. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>