aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: improve support for the My Net Wi-Fi Range Extender deviceGabor Juhos2013-11-292-5/+9
| | | | | | | | | | | | | | | | | | | | This patch improves support for the device considerably. 1. The wifi didn't work in the initial release. This was because the WMAC of the AR9340 is not connected to the antennas. (However, it can pick up wifi signals, if they are strong enough!) Instead there's a dedicated AR9300 chip on the same board, which works. 2. Ethernet throughput is improved. iperf shows that the hardware can sustain more than 200Mbit/s and no longer drops any packages when the link is under load. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4461/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38949
* ag71xx: add F1E specific feature bit definitions to AR934X register fileGabor Juhos2013-11-291-1/+3
| | | | | | | | | | | | | | | | The F1E Phy (AR8035?) requires additional bits to be set in order to provide a fast and reliable connection over gigabit links. When enabled, the link doesn't suffer anymore from a small package loss under load and the performance is improved quite a bit as well. (203 mbit/s vs 112 mbit/s, iperf tcp). Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4460/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38948
* ar71xx: user space support update tl-wr842n_v2 add default led supportGabor Juhos2013-11-291-1/+10
| | | | | | | | | | Small update to uci_defaults/01_leds, to support the usb led Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4426/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38947
* ar71xx: Kernel support update tl-wr842n_v2 added missing usb ledGabor Juhos2013-11-291-1/+1
| | | | | | | | | | | Just a small oversight my part, added the support for the USB led Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4425/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38946
* FPU type should not interfere with the ABI selection. Also make sure we ↵Imre Kaloz2013-11-294-5/+12
| | | | | | | | either do real soft-float or hard-float on ARM, with the right options. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38943
* tunr on some additional featuresImre Kaloz2013-11-291-1/+1
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38942
* ignore the fpu if we're doing soft-floatImre Kaloz2013-11-291-2/+4
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38941
* there's no such thing as a soft fpu, this target should be fine without theseImre Kaloz2013-11-292-2/+0
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38940
* enable using soft-float regardless of having a fpuImre Kaloz2013-11-291-2/+2
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38939
* ubox: fix handling of uci lists, prevent shell code injection from uci ↵Jo-Philipp Wich2013-11-281-2/+2
| | | | | | values (#14548) SVN-Revision: 38938
* Revert "ubox: the validation code has problems with the "(" char. use string ↵Jo-Philipp Wich2013-11-281-1/+1
| | | | | | | | for now" This reverts commit f7c2ac3ea9b5f2dc4ef4ce4ef195de8a4ac5546b. SVN-Revision: 38937
* busybox: do not abort sysntpd init if enable_server is unset, that variable ↵Jo-Philipp Wich2013-11-281-1/+1
| | | | | | just controls the server part for relaying NTP SVN-Revision: 38936
* procd: fix processing of datatype specification with spacesJo-Philipp Wich2013-11-281-2/+2
| | | | SVN-Revision: 38935
* initialize wl12xx from the device treeImre Kaloz2013-11-271-0/+78
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38934
* add device tree based initialization to wl12xxImre Kaloz2013-11-2718-1/+2016
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38933
* refresh/rename patchesImre Kaloz2013-11-2749-373/+118
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38932
* fix gpio interrupt-cells property on AM335xImre Kaloz2013-11-271-0/+57
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38931
* refresh patchImre Kaloz2013-11-271-4/+3
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38930
* make the wl12xx glue code available with compat-wireless, tooImre Kaloz2013-11-271-0/+15
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38929
* add TI wireless symbols and enable the platform glue by defaultImre Kaloz2013-11-271-1/+6
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38928
* mac80211: include 802.11n support when wl12xx is selectedFelix Fietkau2013-11-271-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38927
* ath9k: merge initval updatesFelix Fietkau2013-11-279-38/+3037
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38926
* fix typo in wl128x firmware namesImre Kaloz2013-11-271-3/+3
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38925
* hide package, it's needed all the timeImre Kaloz2013-11-261-0/+1
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38924
* use plain image names inside the target directoriesImre Kaloz2013-11-261-2/+2
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38923
* upgrade Linaro GCC 4.8 to 4.8-2013.11Imre Kaloz2013-11-264-177/+9
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38922
* wl12xx could need the wl128x firmware files, tooImre Kaloz2013-11-261-1/+5
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38921
* mac80211: merge another round of upstream fixesFelix Fietkau2013-11-264-31/+584
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38918
* ralink: dts fixesJohn Crispin2013-11-264-7/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38917
* ubox: the validation code has problems with the "(" char. use string for nowJohn Crispin2013-11-261-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38916
* hostapd: add support for auto-channel selectionFelix Fietkau2013-11-253-6/+7
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38915
* hostapd: update to version 2013-11-20Felix Fietkau2013-11-2533-430/+224
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38914
* kernel/modules: snd-pcm-dmaengine only if CONFIG_SND_DMAENGINE_PCM is setJohn Crispin2013-11-251-2/+2
| | | | | | | Platforms without in-soc audio don't provide CONFIG_SND_DMAENGINE_PCM, thus the module is not generated. SVN-Revision: 38913
* tools/mpfr: add GNU sourceJohn Crispin2013-11-251-1/+2
| | | | | | | | | | | fixes https://dev.openwrt.org/ticket/14519 mpfr is available from GNU too see: https://gforge.inria.fr/forum/forum.php?forum_id=11263 Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 38912
* pppd: Place plugin-specific options after `plugin name`.John Crispin2013-11-251-1/+1
| | | | | | | | | | | | | | | | | | | Before this patch, if we specify a plugin specific option through `pppd_options` in /etc/config/network, e.g. `rp_pppoe_verbose 1`, pppd would quit with the following error in log. Wed Oct 9 09:42:58 2013 daemon.notice netifd: GORG (1689): /usr/sbin/pppd: unrecognized option 'rp_pppoe_verbose' Wed Oct 9 09:42:58 2013 daemon.err pppd[1689]: unrecognized option 'rp_pppoe_verbose' Wed Oct 9 09:42:58 2013 daemon.notice netifd: GORG (1689): pppd version 2.4.5 Wed Oct 9 09:42:58 2013 daemon.notice netifd: GORG (1689): Usage: /usr/sbin/pppd [ options ], where options are: This is due to the requirement that function add_option() should be called by the plugin_init() function first before pppd can parse those options. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 38911
* ralink: add mac address detection for Asus RT-G32 b1John Crispin2013-11-251-1/+5
| | | | | | | | | http://patchwork.openwrt.org/patch/4463/ Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38910
* base-files: allow users to delect debug level during bootJohn Crispin2013-11-255-11/+60
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38909
* procd: update procd.sh to make use of the new validate_data toolJohn Crispin2013-11-251-52/+8
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38908
* ubox: update the validate_data toolJohn Crispin2013-11-251-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38907
* ubox: fix typo that caused log_file to not be validated properlyJohn Crispin2013-11-251-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38906
* ralink: fix up the mt7530 driver to work properly with gmac2John Crispin2013-11-251-6/+10
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38905
* ralink: add LRO supportJohn Crispin2013-11-251-27/+84
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38904
* ralink: add NETIF_F_HW_VLAN_CTAG_TX support for the mt7620X familyJohn Crispin2013-11-251-57/+116
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38903
* ralink: set the mac addr via the dts fileJohn Crispin2013-11-2560-92/+232
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38902
* kirkwood: include ext4 support by defaultLuka Perkov2013-11-241-0/+6
| | | | | | | | Several users reported that they would like this feature. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38901
* kirkwood: kernel: add missing config optionLuka Perkov2013-11-241-0/+1
| | | | | | | | Buildbot found missing config option for target kirkwood. Signed-off-by: Jiri Slachta <slachta@cesnet.cz> SVN-Revision: 38900
* cmake: upgrade to 2.8.12.1Luka Perkov2013-11-241-2/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38899
* kirkwood: drop unnecessary argument from *_UBIFS_OPTS variablesLuka Perkov2013-11-232-3/+3
| | | | | | | | The '-U' aka '--squash-uids' is already used in Image/mkfs/ubifs function. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38898
* kirkwood: add support for iomega iconnectLuka Perkov2013-11-232-0/+18
| | | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> Signed-off-by: Daniel Engberg <daniel.engberg@pyret.net> SVN-Revision: 38897
* For now vdi and vmdk images should be x86 onlyImre Kaloz2013-11-221-0/+2
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38896
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 19:35:34 +0000