aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* brcm63xx: add pflash for remaining pflash equipped boardsJonas Gorski2017-06-0419-0/+210
| | | | Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: do not require fixed partitions when probing from DTJonas Gorski2017-06-041-1/+1
| | | | | | | | Allow the parser to be invoked from DT without fixed cfe/linux/nvram partitions. This allows flash to be probed from DT also for multi flash-size images. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: register SPI controllers through DTJonas Gorski2017-06-0426-41/+539
| | | | | | | Register SPI controllers through device tree. We will wire up the clocks at a later stage. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: backport upstream solution for SPI message size limitsJonas Gorski2017-06-0418-102/+1135
| | | | | | | Backport upstream solution for working around SPI controller maximum message sizes. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: update flash of_node patches to full patch setJonas Gorski2017-06-0410-2/+920
| | | | | | Fixes missing of_node for SPI flash probed through devicetree. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: refresh kernel configJonas Gorski2017-06-041-6/+7
| | | | | | Ensure the config is ordered and has all recent symbols. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* build: fix kernel refresh failure on first runJonas Gorski2017-06-041-5/+5
| | | | | | | | Override {HOST_}QUILT before making decisions based on it, else it will cause target/linux/refresh to fail on first run. Fixes: 36ba6237d6e3a23fbeadcc1812a892faa4b07cbe ("build: fix quilt for mixed package/host builds") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* lantiq: fix 0008-MIPS-lantiq-backport-old-timer-code.patch for Amazon-SETino Reichardt2017-06-034-6/+18
| | | | | | | | | | | | | The patch 0008 removes the vanilla kernel gptu.c of lantiq. But the replacement file timer.c does not work Amazon-SE and is also protected therefore with an CONFIG_SOC_AMAZON_SE :-) This commit will re-activate the default vanilla kernel code in gptu.c for Amazon-SE. Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de> [refresh patches and add same change for kernel 4.9] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: fix lantiq_mei.c and amazonse.dsti for adsl modem firmwareTino Reichardt2017-06-031-31/+29
| | | | | | | | | | | The ltq-adsl-mei package is used for 3 lantiq device types: danube, amazon-se and ar9. These different SoC's need also different definitions. Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de> [fix LTQ_USB_OC_INT for AR9 to match documentation] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: add Allnet ALL0333CJ supportTino Reichardt2017-06-034-0/+139
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Allnet ADSL2+ Modem ALL0333CJ. Specifications: - SoC: Amazon-SE - RAM: 16MB - Storage: 4MB NOR FLash - LEDs: Power, Ethernet, DSL (Sync) - Buttons: 1x Reset Button (not currently supported, will be done) - 1x Ethernet-Port: 1x RJ45 10/100BaseTX - 1x WAN-Port: AnnexB & J, G.992.1(ADSL), G.992.3(ADSL2), G.992.5(ADSL2+) Installation: - can be done via telnet+tftp or serial console - default passwords: - via telnet (root:admin) - via webinterface http://172.16.1.254:8235/ (admin:coolwhite) Installation via telnet / tftp: host: # your own host must have an tftpd daemon, then do this: host: ifconfig eth0:172 172.16.1.1 up host: # telnet to allnet modem, root:admin host: telnet 172.16.1.254 modem: # kill this daemon, it spams your console modem: killall dsl_cpe_control modem: # change to some place in ram: modem: cd /ramdisk/tftp_upload modem: # load lede-lantiq-ase-ALL0333CJ-squashfs-sysupgrade.bin alias uImage modem: tftp -g -r uImage 172.16.1.1 modem: # load these extra tools from your tftpd via: modem: # source: https://github.com/mcmilk/uboot-utils/releases/download/0.1/mips32.tar.gz modem: tftp -g -r flashwrite 172.16.1.1 modem: tftp -g -r fw_setenv 172.16.1.1 modem: tftp -g -r fw.conf 172.16.1.1 modem: ln -s fw_setenv fw_printenv modem: chmod +x * modem: ./fw_setenv disable_recovery y modem: ./fw_setenv kernel_addr 0xb0010000 modem: ./flashwrite /dev/mtd/1 uImage 0 Installation via serial line at uboot: uboot: # erase everything exept bootloader uboot: protect on b0000000 +10000; protect on b03f0000 +10000 uboot: erase all uboot: # get new firmware via tftp: uboot: tftpboot 0x80100000 uImage; setenv kernel_addr 0xb0010000 uboot: # copy to flash: uboot: cp.b 0x80100000 $(kernel_addr) $(filesize) uboot: # disable proprietary image checking: uboot: setenv disable_recovery=y; saveenv uboot: # reboot with LEDE ;) uboot: reset Ethernet works as expected, DSL syncronization does not work properly currently, I am working on this issue. Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de>
* lantiq: fix ifxmips_atm_amazon_se.cTino Reichardt2017-06-031-8/+0
| | | | | | Remove 6 defines, which were defined already some lines above. Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de>
* lantiq: enable Netgear DGN1000B image buildTino Reichardt2017-06-031-0/+14
| | | | | | | | | | | Enable the building of Netgear DGN1000B images. I have an example device here, but it was not tested currently. Also WLAN and USB is not ready in the moment. This is just the proper way, so that developing on this device is known to be done in the near future. Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de>
* lantiq: add Amazon-SE subtargetTino Reichardt2017-06-034-1/+56
| | | | | | Re-Add support for the Amazon-SE subtarget on Lantiq. Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de>
* lantiq: fix amazonse.dstiTino Reichardt2017-06-031-3/+15
| | | | | | | Add missing memory@0 and localbus@0 sections. Fix MEI and GPTU interrupt definitions. Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de>
* kernel: properly package 8250 serial PCI moduleDaniel Golle2017-06-031-4/+7
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: enable PCIe on MT7688Daniel Golle2017-06-032-1/+35
| | | | | | | Submitted upstream as well, see patchwork https://patchwork.linux-mips.org/patch/16223/ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Lantiq: make possible to tweak DSL SRN from UCIAndrea Merello2017-06-031-1/+26
| | | | | | | | | | | | | | | | | | | | | This patch makes possible to tweak the downstream SNR margin on Lantiq DSL devices. The UCI parameter 'network.dsl.ds_snr_offset' is used to set the SNR margin offset. It accepts values in range -50 to +50 in 0.1 dB units. The SNR margin can thus be modified in range -5.0 to +5.0 dB in 0.1 dB steps. Currently this should only affect ADSL (not VDSL). It should be very easy to make this work also on VDSL lines, but since I couldn't test on VDSL lines this patch does not do that yet. I have also a patch for LUCI about this, that I could submit. Tested on FB3370 (Lantiq VR9) and Telecom Italia ADSL2+ line. Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
* lantiq: modified lantiq_dsl.sh status output of latencyHelge Mader2017-06-021-1/+1
| | | | Signed-off-by: Helge Mader <ma@dev.tdt.de>
* lantiq: fix lantiq_dsl.sh status and lucistat outputHelge Mader2017-06-021-12/+12
| | | | Signed-off-by: Helge Mader <ma@dev.tdt.de>
* mvebu: Add block device sd to default kernel configDaniel Engberg2017-06-021-0/+1
| | | | | Add block device sd to kernel config otherwise AHCI/eSATA devices won't get enumerated in /dev Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* x86: disable X2APIC support for legacy subtargetsJo-Philipp Wich2017-06-022-0/+2
| | | | | | | | | Explicitely disable X2APIC support on legacy targets since the targeted processor types do not support it anyway there. Fixes FS#285. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* umdns: remove superfluous include in init scriptJo-Philipp Wich2017-06-021-2/+0
| | | | | | | | | | | | | The umdns init script includes function/network.sh globally, outside of any service procedure. This causes init script activation to fail in buildroot and IB context if umdns is set to builtin. Additionally, the network.sh helper is not actually used. Drop the entire include in order to repair init script activation in build host context. Fixes FS#658. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* dnsmasq: bump to 2.77Kevin Darbyshire-Bryant2017-06-011-4/+4
| | | | | | Bump to the 2.77 release after quite a few test & release candidates. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* mvebu: fix sysupgradeMatthias Schiffer2017-06-013-19/+9
| | | | | | | | | | | | | | | | | mvebu was modifying RAMFS_COPY_BIN and RAMFS_COPY_DATA from a sysupgrade_pre_upgrade hook. As the ramfs is created from stage2, this did not have an effect anymore after the staged sysupgrade changes. As it doesn't really hurt to copy fw_printenv and fw_setenv unconditionally, simply add them in /lib/upgrade/platform.sh, so stage2 will see them. Config copying is moved to a function called by platform_copy_config, where it belongs. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Fixes: FS#821 Fixes: 30f61a34b4cf "base-files: always use staged sysupgrade"
* ramips: add jumbo frame support for v4.9John Crispin2017-06-014-12/+27
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ramips: fixup nand support on v4.9John Crispin2017-06-013-1/+4576
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ppp: propagate master firewall zone to dynamic slave interfaceHans Dedecker2017-05-312-1/+4
| | | | | | | | | | Assign the virtual DHCPv6 interface the firewall zone of the parent interface so fw3 knows the zone to which the virtual DHCPv6 interface belongs. This guarantees the firewall settings are applied correctly for the virtual DHCPv6 interface and allows to query the zone to which the virtual DHCPv6 interface belongs via the fw3 network option. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ar71xx: Fix UBIFS work on Mikrotik RB95x devicesSergey Sergeev2017-05-311-0/+2
| | | | | | | | If nand chip has no NAND_NO_SUBPAGE_WRITE flag on its options ubifs can't use it mtd devices and the kernel crashes with error: __nand_correct_data: uncorrectable ECC error Signed-off-by: Sergey Sergeev <adron@yapic.net>
* usbmode: remove devices with unsupported modesJulian Labus2017-05-311-2/+7
| | | | | | | remove files which include the following mode options BlackberryMode OptionMode PantechMode QuantaMode Signed-off-by: Julian Labus <julian@labus-online.de>
* base-files: nand: use CI_KERNPART whenever the kernel volume is neededChristian Lamparter2017-05-311-4/+4
| | | | | | | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. This patch is in continuation of: commit 93aa86040523 "procd: nand: make it possible to configure kernel and ubi partition" The $CI_KERNPART variable should be used in place of the fixed "kernel" partition name. This allows targets to specifiy alternate names for the kernel partition. Cc: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
* imx6: disable UART dmaKoen Vandeputte2017-05-311-0/+23
| | | | | | | | | | | | | | | | | | | | Fixes these prints on boot: [ 13.785600] imx-uart 2020000.serial: DMA transaction error. [ 13.793134] imx-uart 2020000.serial: DMA transaction error. [ 13.798721] imx-uart 2020000.serial: DMA transaction error. Based on following upstream patch by Tim Harvey (Gateworks): https://github.com/Gateworks/openwrt/commit/80a01b6582f94c4547f39d3a25e0a1e9b6eb9877 TX complete DMA messages are getting missed. This is also currently an issue in mainline. For now we will disable DMA in serial/imx.c. This resolves an issue encountered with RS485 transmit. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: let the "reserved" MTD partition be RO for R6220Enrico Mioso2017-05-311-0/+1
| | | | | | | | | | The "reserved" partition should probably be read-only, just in case. Even not knowing it's content, other devices have marked it as such, so it seems a good idea to do so also for this device. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> CC: Mathias Kresin <dev@kresin.me> CC: Hanqing Wong <hquu@outlook.com>
* uboot-lantiq/spl: fixed uninitialized variable len in spl_uncompress_lzoMartin Schiller2017-05-312-4/+7
| | | | | | This fix is taken from uboot-lantiq v2014.07 (Daniel Schwierzeck) Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* uboot-lantiq: Support newer versions of the PEF7071 ethernetMartin Schiller2017-05-311-1/+1
| | | | | | This fix is taken from uboot-lantiq v2014.07 (Daniel Schwierzeck) Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ar71xx: disable ENS202EXT in mikrotik and nand subtargetsJo-Philipp Wich2017-05-312-0/+2
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* openvpn-easy-rsa: update to 3.0.1Luiz Angelo Daros de Luca2017-05-315-169/+26
| | | | | | | | | | | | | | | | | | | | | | easy-rsa v3 is now a single script. It expects a 'vars' configuration file which path can be set using easy-rsa options, environment variables or just looking in the current directory. The default usage would be: # cd /etc/easy-rsa # easy-rsa COMMAND [command-options] Following upstream changes, /etc/easy-rsa/pki replaces /etc/easy-rsa/keys directory. The default /etc/easy-rsa/pki dir is marked to be kept during upgrade (WARN: priv keys are saved in the system backup) /etc/easy-rsa/openssl.1.0.cnf is now marked as config file while index and serial got removed. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* mt76: update mirror hash after tar portablity fixFelix Fietkau2017-05-301-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tar: override symlink permissionsFelix Fietkau2017-05-301-0/+10
| | | | | | | | On Linux, symlink permissions cannot be altered and are always 0777. On Mac OS X they can be 0755. Force 0777 here to keep tarballs reproducible across systems Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: move Wallys DR344 to generic build targetPiotr Dymacz2017-05-303-7/+10
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: fix Wallys DR344 GPIO-connected LEDs and buttonPiotr Dymacz2017-05-303-10/+33
| | | | | | | | | | | | | | | | | | | | This fixes wrong GPIO numbers for LEDs and button in Wallys DR344 board and sets color of all LEDs to green as the mass production boards have only green one. Actually, DR344 has 6 GPIO-connected LEDs and one button: - GPIO11: status - GPIO12: sig1 - GPIO13: sig2 - GPIO14: sig3 - GPIO15: sig4 - GPIO16: reset button - GPIO17: lan WAN LED is connected directly with AR8035 PHY. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: set GE interface as wan by default in Wallys DR344Piotr Dymacz2017-05-301-1/+1
| | | | | | | This aligns default network interfaces configuration with vendor firmware: GE (eth0) -> wan, FE (eth1) -> lan. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: fix GE interface support in Wallys DR344Piotr Dymacz2017-05-301-30/+8
| | | | | | | | GMAC0 interface of AR9344 SOC in Wallys DR344 board is connected with AR8035, not with AR8327. Without this fix, GE interface doesn't work at all or shows high packet loss ratio. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for EnGenius ENS202EXTMarty Plummer2017-05-3012-1/+180
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | EnGenius ENS202EXT is an outdoor wireless access point with 2-port 10/100 switch, detachable antennas and proprietery PoE. The device is based on Qualcomm/Atheros AR9341 v1. Specifications: - 535/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM - 16 MB of FLASH - UART (J1) header on PCB (unpopulated) - 2x 10/100 Mbps Ethernet - 2.4 GHz, up to 26dBm - 2x external, detachable antennas - 7x LED, 1x button Flash instructions: You have three options: - Use the vendor firmware upgrade page on the web interface and give it the factory.img. This is the easiest way to go about it. - If you have serial access during u-boot, interrupt the normal boot (any key before timeout) and run 'run failsafe_boot'; this will bring you to a minimal openwrt luci image on ip 192.168.1.1 useful if you've bricked the normal firmware. - Use the vendor's management cli, which can be accessed via telnet with the same credentials as the web login (default admin:admin), then issue the following commands: *** Hi admin, welcome to use cli(V-1.6.7) *** ---========= Commands Help =========--- stat -- Status sys -- System wless2 -- 2.4G-Wireless mgmt -- Management tree -- Tree help -- Help reboot -- Reboot ens202ext>mgmt Management ---========= Commands Help =========--- admin -- Administration mvlan -- Management VLAN settings snmp -- SNMP settings backup -- Backup/Restore settings autorb -- Auto reboot settings fwgrade -- Firmware upgrade time -- Time settings wifisch -- Wifi schedule log -- Log diag -- Diagnostics disc -- Device Discovery logout -- Logout help -- Help exit -- Exit ens202ext/mgmt>fwgrade Management --> Firmware upgrade ---========= Commands Help =========--- fwup -- Firmware upgrade help -- Help exit -- Exit ens202ext/mgmt/fwgrade>fwup http://web.server/lede-ar71xx-generic-ens202ext-squashfs-factory.bin Signed-off-by: Marty Plummer <ntzrmtthihu777@gmail.com>
* ar71xx: fix LED defines for TP-Link TL-WR740N v6Andrey Polischuk2017-05-309-18/+112
| | | | | | Signed-off-by: Andrey Polischuk <androld.b@gmail.com> [changed commit subject, dropped redundant kernel config symbol] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* iproute2: bump to 4.11Kevin Darbyshire-Bryant2017-05-3016-529/+228
| | | | Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* toolchain/binutils: Set 2.28 as default versionDaniel Engberg2017-05-302-2/+2
| | | | | | Use 2.28 by default Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* mvebu: clearfog: assign SFP port to WAN zoneJosua Mayer2017-05-301-1/+1
| | | | | | | | | The single SFP port is meant for direct media access to WAN, such as VDSL2, GPON). While it could also be used for in-home fiber, it is much more likely that the LAN is standard ethernet, especially considering that SFP is the onmly port that can go beyond 1Gbps. Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
* mvebu: clearfog: document interface configurationJosua Mayer2017-05-301-6/+9
| | | | | | | | | | | | | Take explicit note of what physical ports eth{0,1,2} refer to. Also repair port assignment: At some point between 4.9.20 and 4.9.29 the numbering changed. Keep previous port assignment that was: LAN = SFP+Switch WAN = standalone ethernet Also use the same assignment for Clearfog-Base to avoid confusion. Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
* mvebu: clearfog: include DTB for all variants in imageJosua Mayer2017-05-301-3/+5
| | | | | | | Installing all armada-388-clearfog-* DTBs in the same sdcard image, it now becomes much easier to swap sdcards between different device variants. Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
* mvebu: update boot-script to use generic variablesJosua Mayer2017-05-302-10/+44
| | | | | | | | | | | U-Boot provides standard variables for load addresses, and filesystem-agnostic load-commands. Furthermore thanks to distro-boot, the device and partition from which the system boots is known. The new boot-script makes use of all this information. Tested on the only board that uses this boot-script: Clearfog Pro Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>