aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* ppp: propagate master firewall zone to dynamic slave interfaceHans Dedecker2017-05-312-1/+4
| | | | | | | | | | Assign the virtual DHCPv6 interface the firewall zone of the parent interface so fw3 knows the zone to which the virtual DHCPv6 interface belongs. This guarantees the firewall settings are applied correctly for the virtual DHCPv6 interface and allows to query the zone to which the virtual DHCPv6 interface belongs via the fw3 network option. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ar71xx: Fix UBIFS work on Mikrotik RB95x devicesSergey Sergeev2017-05-311-0/+2
| | | | | | | | If nand chip has no NAND_NO_SUBPAGE_WRITE flag on its options ubifs can't use it mtd devices and the kernel crashes with error: __nand_correct_data: uncorrectable ECC error Signed-off-by: Sergey Sergeev <adron@yapic.net>
* usbmode: remove devices with unsupported modesJulian Labus2017-05-311-2/+7
| | | | | | | remove files which include the following mode options BlackberryMode OptionMode PantechMode QuantaMode Signed-off-by: Julian Labus <julian@labus-online.de>
* base-files: nand: use CI_KERNPART whenever the kernel volume is neededChristian Lamparter2017-05-311-4/+4
| | | | | | | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. This patch is in continuation of: commit 93aa86040523 "procd: nand: make it possible to configure kernel and ubi partition" The $CI_KERNPART variable should be used in place of the fixed "kernel" partition name. This allows targets to specifiy alternate names for the kernel partition. Cc: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
* imx6: disable UART dmaKoen Vandeputte2017-05-311-0/+23
| | | | | | | | | | | | | | | | | | | | Fixes these prints on boot: [ 13.785600] imx-uart 2020000.serial: DMA transaction error. [ 13.793134] imx-uart 2020000.serial: DMA transaction error. [ 13.798721] imx-uart 2020000.serial: DMA transaction error. Based on following upstream patch by Tim Harvey (Gateworks): https://github.com/Gateworks/openwrt/commit/80a01b6582f94c4547f39d3a25e0a1e9b6eb9877 TX complete DMA messages are getting missed. This is also currently an issue in mainline. For now we will disable DMA in serial/imx.c. This resolves an issue encountered with RS485 transmit. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: let the "reserved" MTD partition be RO for R6220Enrico Mioso2017-05-311-0/+1
| | | | | | | | | | The "reserved" partition should probably be read-only, just in case. Even not knowing it's content, other devices have marked it as such, so it seems a good idea to do so also for this device. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> CC: Mathias Kresin <dev@kresin.me> CC: Hanqing Wong <hquu@outlook.com>
* uboot-lantiq/spl: fixed uninitialized variable len in spl_uncompress_lzoMartin Schiller2017-05-312-4/+7
| | | | | | This fix is taken from uboot-lantiq v2014.07 (Daniel Schwierzeck) Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* uboot-lantiq: Support newer versions of the PEF7071 ethernetMartin Schiller2017-05-311-1/+1
| | | | | | This fix is taken from uboot-lantiq v2014.07 (Daniel Schwierzeck) Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ar71xx: disable ENS202EXT in mikrotik and nand subtargetsJo-Philipp Wich2017-05-312-0/+2
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* openvpn-easy-rsa: update to 3.0.1Luiz Angelo Daros de Luca2017-05-315-169/+26
| | | | | | | | | | | | | | | | | | | | | | easy-rsa v3 is now a single script. It expects a 'vars' configuration file which path can be set using easy-rsa options, environment variables or just looking in the current directory. The default usage would be: # cd /etc/easy-rsa # easy-rsa COMMAND [command-options] Following upstream changes, /etc/easy-rsa/pki replaces /etc/easy-rsa/keys directory. The default /etc/easy-rsa/pki dir is marked to be kept during upgrade (WARN: priv keys are saved in the system backup) /etc/easy-rsa/openssl.1.0.cnf is now marked as config file while index and serial got removed. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* mt76: update mirror hash after tar portablity fixFelix Fietkau2017-05-301-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tar: override symlink permissionsFelix Fietkau2017-05-301-0/+10
| | | | | | | | On Linux, symlink permissions cannot be altered and are always 0777. On Mac OS X they can be 0755. Force 0777 here to keep tarballs reproducible across systems Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: move Wallys DR344 to generic build targetPiotr Dymacz2017-05-303-7/+10
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: fix Wallys DR344 GPIO-connected LEDs and buttonPiotr Dymacz2017-05-303-10/+33
| | | | | | | | | | | | | | | | | | | | This fixes wrong GPIO numbers for LEDs and button in Wallys DR344 board and sets color of all LEDs to green as the mass production boards have only green one. Actually, DR344 has 6 GPIO-connected LEDs and one button: - GPIO11: status - GPIO12: sig1 - GPIO13: sig2 - GPIO14: sig3 - GPIO15: sig4 - GPIO16: reset button - GPIO17: lan WAN LED is connected directly with AR8035 PHY. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: set GE interface as wan by default in Wallys DR344Piotr Dymacz2017-05-301-1/+1
| | | | | | | This aligns default network interfaces configuration with vendor firmware: GE (eth0) -> wan, FE (eth1) -> lan. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: fix GE interface support in Wallys DR344Piotr Dymacz2017-05-301-30/+8
| | | | | | | | GMAC0 interface of AR9344 SOC in Wallys DR344 board is connected with AR8035, not with AR8327. Without this fix, GE interface doesn't work at all or shows high packet loss ratio. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for EnGenius ENS202EXTMarty Plummer2017-05-3012-1/+180
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | EnGenius ENS202EXT is an outdoor wireless access point with 2-port 10/100 switch, detachable antennas and proprietery PoE. The device is based on Qualcomm/Atheros AR9341 v1. Specifications: - 535/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM - 16 MB of FLASH - UART (J1) header on PCB (unpopulated) - 2x 10/100 Mbps Ethernet - 2.4 GHz, up to 26dBm - 2x external, detachable antennas - 7x LED, 1x button Flash instructions: You have three options: - Use the vendor firmware upgrade page on the web interface and give it the factory.img. This is the easiest way to go about it. - If you have serial access during u-boot, interrupt the normal boot (any key before timeout) and run 'run failsafe_boot'; this will bring you to a minimal openwrt luci image on ip 192.168.1.1 useful if you've bricked the normal firmware. - Use the vendor's management cli, which can be accessed via telnet with the same credentials as the web login (default admin:admin), then issue the following commands: *** Hi admin, welcome to use cli(V-1.6.7) *** ---========= Commands Help =========--- stat -- Status sys -- System wless2 -- 2.4G-Wireless mgmt -- Management tree -- Tree help -- Help reboot -- Reboot ens202ext>mgmt Management ---========= Commands Help =========--- admin -- Administration mvlan -- Management VLAN settings snmp -- SNMP settings backup -- Backup/Restore settings autorb -- Auto reboot settings fwgrade -- Firmware upgrade time -- Time settings wifisch -- Wifi schedule log -- Log diag -- Diagnostics disc -- Device Discovery logout -- Logout help -- Help exit -- Exit ens202ext/mgmt>fwgrade Management --> Firmware upgrade ---========= Commands Help =========--- fwup -- Firmware upgrade help -- Help exit -- Exit ens202ext/mgmt/fwgrade>fwup http://web.server/lede-ar71xx-generic-ens202ext-squashfs-factory.bin Signed-off-by: Marty Plummer <ntzrmtthihu777@gmail.com>
* ar71xx: fix LED defines for TP-Link TL-WR740N v6Andrey Polischuk2017-05-309-18/+112
| | | | | | Signed-off-by: Andrey Polischuk <androld.b@gmail.com> [changed commit subject, dropped redundant kernel config symbol] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* iproute2: bump to 4.11Kevin Darbyshire-Bryant2017-05-3016-529/+228
| | | | Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* toolchain/binutils: Set 2.28 as default versionDaniel Engberg2017-05-302-2/+2
| | | | | | Use 2.28 by default Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* mvebu: clearfog: assign SFP port to WAN zoneJosua Mayer2017-05-301-1/+1
| | | | | | | | | The single SFP port is meant for direct media access to WAN, such as VDSL2, GPON). While it could also be used for in-home fiber, it is much more likely that the LAN is standard ethernet, especially considering that SFP is the onmly port that can go beyond 1Gbps. Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
* mvebu: clearfog: document interface configurationJosua Mayer2017-05-301-6/+9
| | | | | | | | | | | | | Take explicit note of what physical ports eth{0,1,2} refer to. Also repair port assignment: At some point between 4.9.20 and 4.9.29 the numbering changed. Keep previous port assignment that was: LAN = SFP+Switch WAN = standalone ethernet Also use the same assignment for Clearfog-Base to avoid confusion. Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
* mvebu: clearfog: include DTB for all variants in imageJosua Mayer2017-05-301-3/+5
| | | | | | | Installing all armada-388-clearfog-* DTBs in the same sdcard image, it now becomes much easier to swap sdcards between different device variants. Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
* mvebu: update boot-script to use generic variablesJosua Mayer2017-05-302-10/+44
| | | | | | | | | | | U-Boot provides standard variables for load addresses, and filesystem-agnostic load-commands. Furthermore thanks to distro-boot, the device and partition from which the system boots is known. The new boot-script makes use of all this information. Tested on the only board that uses this boot-script: Clearfog Pro Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
* u-boot-mvebu: clearfog: enable setexpr commandJosua Mayer2017-05-301-0/+28
| | | | Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
* u-boot-mvebu: clearfog: implement distro-bootJosua Mayer2017-05-305-49/+126
| | | | | | | Add a patchfile that implements distro-boot and is meant to go upstream Also make the other patches git-am'able for easier maintenance. Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
* u-boot-mvebu: update to 2017.03Josua Mayer2017-05-304-15/+26
| | | | Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
* mwlwifi: update to the latest versionAnsuel Smith2017-05-301-3/+3
| | | | Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* toolchain/gcc: fix --with-isl pathSyrone Wong2017-05-301-2/+2
| | | | | | | | | | | This fixes GCC 7 compilation when GRAPHITE is selected. The path is replaced with $(TOOLCHAIN_DIR), while it should be $(STAGING_DIR_HOST). To keep in sync with the path of gmp, mpfr and mpc, I'm using $(TOPDIR)/staging_dir/host. Fixes: f62f4b3c5c9d ("build: stop overriding STAGING_DIR_HOST for toolchain build") Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
* mt76: update to the latest version, fixes a mt7603 beacon issueFelix Fietkau2017-05-301-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* procd: update to latest git HEADMatthias Schiffer2017-05-301-3/+3
| | | | | | e7bb2c8 upgraded: define __GNU_SOURCE Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* sunxi: sysupgrade: sync with x86Matthias Schiffer2017-05-292-50/+72
| | | | | | | | | | | | sunxi sysupgrade was based on the x86 implementation; sync fixes and other changes from the current x86 version: x86: fix sysupgrades on disks with 4k block size x86: sysupgrade: move partition table change check to platform_check_image x86: sysupgrade: refactor platform_do_upgrade x86: sysupgrade: explicitly rescan disk after writing partition table Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* sunxi: sysupgrade: don't write partitions twiceMatthias Schiffer2017-05-291-1/+1
| | | | | | | | | | | | | | When existing partitions are retained, the dd call writing the uboot image in the space before the first partition was accidentally writing the whole image, making the code for individual partitions redundant. Limit the copy to 1016KiB (the first 8KiB are skipped, and the first partition starts at 1024KiB). In addition, conv=notrunc is replaced with conv=fsync. It seems this was an oversight, as notrunc doesn't make sense for block devices and all other dd commands use conv=fsync. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* x86: sysupgrade: explicitly rescan disk after writing partition tableMatthias Schiffer2017-05-291-0/+6
| | | | | | | This should ensure that the kernel partition can be mounted in platform_copy_config when its size has changed. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* x86: sysupgrade: refactor platform_do_upgradeMatthias Schiffer2017-05-291-33/+36
| | | | | | | By returning early when no upgrade device can be found and handling the SAVE_PARTITIONS=0 case differently, we can get rid of two levels of if. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* x86: sysupgrade: move partition table change check to platform_check_imageMatthias Schiffer2017-05-291-4/+25
| | | | | | | The staged sysupgrade will prevent us from using ask_bool in platform_do_upgrade; therefore, the check is moved to platform_check_image. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ramips: sysupgrade: move nand_do_upgrade call to platform_do_upgradeMatthias Schiffer2017-05-291-8/+1
| | | | | | | All targets with NAND support should gradually move their nand_do_upgrade calls from platform_pre_upgrade to platform_do_upgrade. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: add support for staged sysupgrades from failsafe modeMatthias Schiffer2017-05-293-10/+25
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: sysupgrade cleanupMatthias Schiffer2017-05-293-105/+102
| | | | | | | | | | | | Some functions only used by stage2 are moved there from common.sh. One piece that could still use more cleanup is platform_pre_upgrade: many targets reference files from there are aren't available in the ramfs, so we need to evaluate it before the switch; conversely, flash writes happen in that function on some targets. Targets that do the latter should be fixed eventually to use platform_do_upgrade for that purpose. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* fstools: snapshot: handle jffs2 conversion using upgradedMatthias Schiffer2017-05-292-7/+9
| | | | | | | We can reuse the kill_remaining and run_ramfs facilities of the stage2 run by upgraded. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* fstools: clean up trailing whitespace in snapshot scriptMatthias Schiffer2017-05-291-1/+1
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: always use staged sysupgradeMatthias Schiffer2017-05-294-148/+162
| | | | | | | | | | | Support for the -d and -p options is dropped; it may be added again at some point by adding these flags to the ubus sysupgrade call. A downside of this is that we get a lot less information about the progress of the upgrade: as soon as the actual upgrade starts, all shell sessions are killed to allow unmounting the root filesystem. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* procd: remove procd-nand packageMatthias Schiffer2017-05-294-61/+14
| | | | | | | | | | | We always want to support staged upgrades now, so it's better to include upgraded into the main package. /lib/upgrade/nand.sh is moved to base-files. The procd-nand-firstboot package is removed for now, it may return later as a separate package. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* procd: update to latest git HEADMatthias Schiffer2017-05-291-3/+3
| | | | | | | | | | | | | | | | 992b796 rcS: add missing fcntl.h include 63789e5 init: add support for sysupgrades triggered from preinit 5b1fb35 Remove code that has become unnecessary after sysupgrade changes 5918b6d upgraded: add support for passing a "command" argument to stage2 056d8dd upgraded: link dynamically, chroot during exec 7c6cf55 system: always support staged sysupgrade d42b21e procd/rcS: Use /dev/null as stdin e0098d4 service/instance: add an auto start option 1247db1 procd: Log initscript output prefixed with script name 8d720b2 procd: Don't use syslog before its initialization 2555474 procd: Add missing \n in debug message Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* procd: prepare NAND sysupgrade for making upgraded dynamically linkedMatthias Schiffer2017-05-291-2/+3
| | | | | | | | Use install_bin to copy upgraded with all dependencies. The old name /tmp/upgraded is temporarily retained as a symlink to avoid breaking things. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* procd: clean up trailing whitespace in nand.shMatthias Schiffer2017-05-291-2/+2
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mt76: update to the latest version, improves mt7603/7628 stabilityFelix Fietkau2017-05-291-4/+4
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: fix kmod package build on non-GNU systemsFelix Fietkau2017-05-291-1/+1
| | | | | | | BSD paste requires a filename argument, and it accepts - to use stdin as intended. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/sparse: Update to snapshot 2017-03-31Daniel Engberg2017-05-291-4/+4
| | | | | | | Update sparse to snapshot 2017-03-31 Switch to HTTPS Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* toolchain/insight: Remove from treeDaniel Engberg2017-05-294-91/+1
| | | | | | | | Insight hasn't been touched since 2009 and I can't find any references at least 6 years back of being used. Ubuntu and Debian removed insight years ago from their repos so I think we can safely remove this too. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-14 20:38:53 +0000