aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* libnl: bump to 3.4.0Konstantin Demin2018-07-074-31/+15
| | | | | | refresh patches Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
* uboot-imx: bump to 2018.03 which fixes the build issues with fdt64_t ↵Vladimir Vid2018-07-079-1636/+26
| | | | | | | | | | | redefinitions * change mx6qsabresd to mx6qsabres to match defconfig name * merge wanboard profiles since there is only one defconfig for the target device * move wanboard options from wandboard.h to defconfig * remove legacy patches Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* mac80211: initialize sinfo in cfg80211_get_stationSven Eckelmann2018-07-071-0/+42
| | | | | | | | | | | | | | | | | | | Most of the implementations behind cfg80211_get_station will not initialize sinfo to zero before manipulating it. For example, the member "filled", which indicates the filled in parts of this struct, is often only modified by enabling certain bits in the bitfield while keeping the remaining bits in their original state. A caller without a preinitialized sinfo.filled can then no longer decide which parts of sinfo were filled in by cfg80211_get_station (or actually the underlying implementations). cfg80211_get_station must therefore take care that sinfo is initialized to zero. Otherwise, the caller may tries to read information which was not filled in and which must therefore also be considered uninitialized. In batadv_v_elp_get_throughput's case, an invalid "random" expected throughput may be stored for this neighbor and thus the B.A.T.M.A.N V algorithm may switch to non-optimal neighbors for certain destinations. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* ath10k-ct: search DT for BDF variant infoSven Eckelmann2018-07-073-1/+363
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Board Data File (BDF) is loaded upon driver boot-up procedure. The right board data file is identified on QCA4019 using bus, bmi-chip-id and bmi-board-id. The problem, however, can occur when the (default) board data file cannot fulfill the vendor requirements and it is necessary to use a different board data file. This problem was solved for SMBIOS by adding a special SMBIOS type 0xF8. Something similar has to be provided for systems without SMBIOS but with device trees. No solution was specified by QCA and therefore a new one has to be found for ath10k. The device tree requires addition strings to define the variant name wifi@a000000 { status = "okay"; qcom,ath10k-calibration-variant = "RT-AC58U"; }; wifi@a800000 { status = "okay"; qcom,ath10k-calibration-variant = "RT-AC58U"; }; This would create the boarddata identifiers for the board-2.bin search * bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=RT-AC58U * bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=RT-AC58U Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* config: add config option for KERNEL_TASKSTATSJeremiah McConnell2018-07-071-0/+21
| | | | | | | | | | In order for monitoring tools such as atop and htop to track and report i/o data, kernel support for task statistics and io accounting is required. Add a config option to enable building this support in the kernel. Signed-off-by: Jeremiah McConnell <miah@miah.com>
* mbedtls: Activate deterministic ECDSAHauke Mehrtens2018-07-071-18/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | With deterministic ECDSA the value k needed for the ECDSA signature is not randomly generated any more, but generated from a hash over the private key and the message to sign. If the value k used in a ECDSA signature or the relationship between the two values k used in two different ECDSA signatures over the same content is know to an attacker he can derive the private key pretty easily. Using deterministic ECDSA as defined in the RFC6979 removes this problem by deriving the value k deterministically from the private key and the content which gets signed. The resulting signature is still compatible to signatures generated not deterministic. This increases the size of the ipk on mips 24Kc by about 2 KByte. old: 166.240 libmbedtls_2.11.0-1_mips_24kc.ipk new: 167.811 libmbedtls_2.11.0-1_mips_24kc.ipk This does not change the ECDSA performance in a measurable way. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mbedtls: Disable MBEDTLS_SHA256_SMALLER implementationDaniel Engberg2018-07-071-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | Disable MBEDTLS_SHA256_SMALLER implementation, not enabled by default in upstream and reduces performance by quite a bit. Source: include/mbedtls/config.h Enable an implementation of SHA-256 that has lower ROM footprint but also lower performance. The default implementation is meant to be a reasonnable compromise between performance and size. This version optimizes more aggressively for size at the expense of performance. Eg on Cortex-M4 it reduces the size of mbedtls_sha256_process() from ~2KB to ~0.5KB for a performance hit of about 30%. The size of mbedtls increased a little bit: ipkg for mips_24kc before: 164.382 Bytes ipkg for mips_24kc after: 166.240 Bytes Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* mbedtls: Update to 2.11.0Daniel Engberg2018-07-076-32/+58
| | | | | | | | | | | | | | | | Update mbed TLS to 2.11.0 Disable OFB block mode and XTS block cipher mode, added in 2.11.0. The soVersion of mbedtls changed, bump PKG_RELEASE for packages that use mbedTLS This is to avoid having a mismatch between packages when upgrading. The size of mbedtls increased a little bit: ipkg for mips_24kc before: 163.846 Bytes ipkg for mips_24kc after: 164.382 Bytes Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* mbedtls: cleanup config patchDaniel Engberg2018-07-071-35/+28
| | | | | | | Clean up patch, use "//" consistently. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: Enable SD block devicesDaniel Engberg2018-07-071-0/+1
| | | | | | | | USB storage support is however SCSI Disk block device support isn't meaning that connected devices wont enumerate. Enable CONFIG_BLK_DEV_SD by default to fix it. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* brcm2708: platform.sh: fix tar directory directiveAlexandru Ardelean2018-07-071-1/+1
| | | | | | | | BusyBox's `tar` command does not support the `--directory` directive, which is essentially `-C` in short-form option. BusyBox's `tar` command supports `-C`. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* libconfig: update to version 1.7.2Enrico Mioso2018-07-071-4/+4
| | | | | | | | | The previous link did not work here. Compile-tested on: bcm47xx Runtime-tested on: bcm47xx Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
* kernel: remove DEVMEM and DEVKMEM from target's configLuis Araneda2018-07-075-8/+0
| | | | | | | | | These options are handled by generic configuration Targets that need these options should select KERNEL_DEVMEM and/or KERNEL_DEVKMEM options on OpenWRT's config Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* WDR4900v1 remove dt node for absent hw crypto.Tim Small2018-07-071-0/+24
| | | | | | | | | | | | | | | | | | The WDR4900v1 uses the P1040 SoC, so the device tree pulls in the definition for the related P1010 SoC. However, the P1040 lacks the CAAM/SEC4 hardware crypto accelerator which the P1010 device tree defines. If left defined, this causes the CAAM drivers (if present) to attempt to use the non-existent device, making various crypto-related operations (e.g. macsec and ipsec) fail. This commit overrides the incorrect dt node definition in the included file. See also: - https://bugs.openwrt.org/index.php?do=details&task_id=1262 - https://community.nxp.com/thread/338432#comment-474107 Signed-off-by: Tim Small <tim@seoss.co.uk>
* ca-certificates: ca-bundle: add symlink for openssl default settingYousong Zhou2018-07-071-0/+2
| | | | | | | | | | OpenSSL defaults X509_CERT_FILE to /etc/ssl/cert.pem. This change is needed for wget-ssl and possibly others to work seamlessly with fresh ca-bundle installation Fixes openwrt/packages#6152 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: usb: dwc2 DMA alignment fixesAntti Seppälä2018-07-072-0/+176
| | | | | | | | | | Add two patches submitted for upstream review that significantly improve the dwc2 driver on openwrt from kernel stability and performance perspectives. Fixes: FS#1367 Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
* linux: update license tag to use correct SPDX tagFlorian Eckert2018-07-071-1/+1
| | | | | | Use SPDX tag. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* toolchain/nasm: fix missing AR/RANLIB variablesFelix Fietkau2018-07-071-4/+5
| | | | | | Fixes build on macOS Signed-off-by: Felix Fietkau <nbd@nbd.name>
* perf: remove linux 4.4 workaroundsFelix Fietkau2018-07-074-75/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove linux 4.4 supportFelix Fietkau2018-07-07269-42118/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libubox: update to the latest versionFelix Fietkau2018-07-071-3/+3
| | | | | | 3c1b33b utils: add const_* byteswapping functions Signed-off-by: Felix Fietkau <nbd@nbd.name>
* firmware: amd64-microcode: update to 20180524Zoltan HERPAI2018-07-071-2/+2
| | | | | | | | | | | | | * New microcode update packages from AMD upstream: + New Microcodes: sig 0x00800f12, patch id 0x08001227, 2018-02-09 + Updated Microcodes: sig 0x00600f12, patch id 0x0600063e, 2018-02-07 sig 0x00600f20, patch id 0x06000852, 2018-02-06 * Adds Spectre v2 (CVE-2017-5715) microcode-based mitigation support, plus other unspecified fixes/updates. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* kmod-sched-cake: bump to latest 20180706Kevin Darbyshire-Bryant2018-07-071-3/+3
| | | | | | | Fixes a potential infinite loop bug when in unlimited (ie not using built in shaper) mode. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* tools/ccache: update to 3.4.2Hannu Nyman2018-07-062-5/+5
| | | | | | update version and refresh patch Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* tools/cmake: update to 3.11.4Hannu Nyman2018-07-062-3/+3
| | | | | | Update cmake and refresh patches. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* toolchain: Replace YASM with NASMTed Hess2018-07-053-20/+13
| | | | | | | | | | Packages libx264 and ffmpeg are built with ASM options on x86 platforms. The current libx264 version no longer builds with YASM and requires NASM. ffmpeg 3.x can be built with either YASM or NASM however, furture 4.x versions will require NASM. Signed-off-by: Ted Hess <thess@kitschensync.net> Acked-by: Rosen Penev <rosenp@gmail.com>
* download.mk: enable DownloadMethod/github_archiveYousong Zhou2018-07-051-8/+14
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* scripts/dl_github_archive.py: rename from download.pyYousong Zhou2018-07-052-125/+130
| | | | | | | | | | | - Make the code more GitHub-specific - Requires mirror hash to work with .gitattributes - Use different API depending on whether PKG_SOURCE_VERSION is a complete commit id or other ref types like tags - Fix removing symbolic link - pre-clean dir_untar for possible leftovers from previous run Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* download.mk: add more commentsYousong Zhou2018-07-051-2/+5
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* fixup-makefile.pl: fixup when PKG_SOURCE is defined elsewhereYousong Zhou2018-07-051-1/+1
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* elfutils: bump to 0.173Luiz Angelo Daros de Luca2018-07-047-351/+149
| | | | | | | | | - Removed hacks to use standalone argp as upstream now detects it nicely. - As we are already installing files, use files from PKG_INSTALL_DIR and not PKG_BUILD_DIR - Only changes Makefile.am as PKG_FIXUP:=autoreconf is in use Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* kernel: bump 4.14 to 4.14.53Koen Vandeputte2018-07-045-13/+13
| | | | | | | | | Refreshed all patches Compile-tested on: cns3xxx, imx6, x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.111Koen Vandeputte2018-07-045-8/+8
| | | | | | | | | Refreshed all patches Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath79: remove bs-partition ro-flag for UniFi AC devicesChristoph Krapp2018-07-041-1/+0
| | | | | | | | | | | | This removes the read-only flag from the bs (bootselect) partition on UniFi AC devices. This allows to correct the indicator from which partition the device is booting its kernel from. See also: - freifunk-gluon/gluon#1301 - https://bugs.lede-project.org/index.php?do=details&task_id=662 Signed-off-by: Christoph Krapp <achterin@googlemail.com>
* ath79: swap TP-Link Archer C7 v2 USB port LED and GPIO namesAleksandr V. Piskunov2018-07-041-6/+6
| | | | | | | | | TP-Link Archer C7 v2 USB port LED and GPIO names are in incorrect order, i.e. in order to match actual user visible labels, usb1 should be usb2, and vice versa. This patch swaps LED and GPIO power control node names. Signed-off-by: Aleksandr V. Piskunov <aleksandr.v.piskunov@gmail.com>
* ath79: drop mv88e6063 switch driverMathias Kresin2018-07-041-289/+0
| | | | | | | | Due do a missing KCONFIG isn't selectable nor enabled in the target kernel config. Drop it for now and enable/add the driver at the time it is required. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq806x: fix numbering for Netgear R7800 LAN portsAleksandr V. Piskunov2018-07-041-5/+5
| | | | | | | | | | Netgear R7800 switch LAN ports are numbered backwards in LuCI, i.e. numbering is not corresponding to the actual physical port labels, patch fixes that. Signed-off-by: Aleksandr V. Piskunov <aleksandr.v.piskunov@gmail.com> [merged with existing board using the same config] Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* ramips: add support for TL-WA801ND v5Romain MARIADASSOU2018-07-046-0/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - System-On-Chip: MediaTek MT7628NN - CPU/Speed: 580 MHz - Flash-Chip: ELM Technology GD25Q64 - Flash size: 8192 KiB - RAM: 64 MiB - Wireless No1: SoC-integrated: MT7628N 2.4GHz 802.11bgn Currently the only method to install openwrt for the first time is via TFTP recovery. After first install you can use regular updates. Flash instructions: 1) To flash the recovery image, start a TFTP server with IP address 192.168.0.66 and serve the recovery image named tp_recovery.bin. 2) Connect your device to the LAN port, then press the WPS and Reset button and power it up. Keep pressing the WPS/Reset button for 10 seconds or until the lock LED is lighting up. It will try to download the recovery image and flash it. It can take up to 2-3 minutes to finish. When it reaches 100%, the router will reboot itself. Signed-off-by: Romain MARIADASSOU <roms2000@free.fr>
* ramips: add support for ZyXEL Keenetic Extra IIMaxim Anisimov2018-07-046-2/+228
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - System-On-Chip: MT7628N/N - CPU/Speed: 580 MHz - Flash-Chip: Winbond w25q256 - Flash size: 32768 KiB - RAM: 128 MiB - 5x 10/100 Mbps Ethernet - 4x external, non-detachable antennas - UART (J1) header on PCB (57600 8n1) - Wireless No1 (2T2R): SoC-integrated: MT7628N 2.4GHz 802.11bgn - Wireless No2 (2T2R): On-board chip: MT7612EN 5GHz 802.11ac - USB: Yes 1 x 2.0 - 4x LED, 3x button The device supports dual boot mode. So we use only first half of flash. Flash instruction: The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.1.2/24 and tftp server. 2. Rename "openwrt-ramips-mt76x8-zyxel_keenetic-extra-ii-squashfs-factory.bin" to "kextra2_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed until power led start blinking. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
* ramips: move zyimage define to common MakefileMaxim Anisimov2018-07-042-4/+4
| | | | Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
* ramips: add support for MikroTik RouterBOARD RBM11gTobias Schramm2018-07-046-1/+157
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the MikroTik RouterBOARD RBM11g. =Hardware= The RBM11g is a mt7621 based device featuring one GbE port and one miniPCIe slot with a sim card socket and USB 2.0. ==Switch== The single onboard Ethernet port is connected the CPU directly. The internal switch of the mt7621 SoC is disabled. ==Flash== The device has one spi nor flash chip. It is a 128 Mbit winbond 25Q128FVS connected to CS0. ==PCIe== The board features a single miniPCIe slot. It has a dedicated mini SIM socket and a USB 2.0 port. Power to the miniPCIe slot is controlled via GPIO9. ==USB== There are no external USB ports. ==Power== The board can accept both, passive PoE and external power via a 2.1 mm barrel jack (center-positive). The input voltage range is 11-32 V. ==Serial port== The device does have an onboard UART on an unpopulated header next to the flash chip: GND: pin 2 TX: pin 7 RX: pin 6 Settings: 115200, 8N1 See below illustration for positioning of the header. 0 = screw hole * = some pin T = TX pin R = RX pin G = GND pin Pinout: +--------------- |O | __ | / \ | \__/ | | | | +---+ | |RAM| | +--+ | | | |**| <- unpopulated header with UART | |*T| +---+ | |R*| +--------+ | |**| | | | |G*| | CPU | | +--+ | | | +--+ | | | | | +--------+ | +--+ <- flash chip |O | +-----+ | | | |+--+ | | || | | | +--------------------- =Installation= To install an OpenWRT image to the device two components must be built: 1. A openwrt initramfs image 2. A openwrt sysupgrade image ===initramfs & sysupgrade image=== Select target devices "Mikrotik RBM11G" in openwrt menuconfig and build the images. This will create the images "openwrt-ramips-mt7621-mikrotik_rbm11g-initramfs-kernel.bin" and "openwrt-ramips-mt7621-mikrotik_rbm11g-squashfs-sysupgrade.bin" in the output directory. ==Installing== **Make sure to back up your RouterOS license in case you do ever want to go back to RouterOS using "/system license output" and back up the created license file.** When rebooted the board will try booting via ethernet first. If your board does not boot via ethernet automatically you will have to attach to the serial port and set ethernet as boot device within RouterBOOT. 1. Set up a dhcp server that points the bootfile to tftp server serving the "openwrt-ramips-mt7621-mikrotik_rbm11g-initramfs-kernel.bin" initramfs image 2. Connect to ethernet port on board 3. Power on the board 4. Wait for OpenWrt to boot Right now OpenWrt will be running with a SSH server listening. Now OpenWrt must be flashed to the devices flash: 1. Copy "openwrt-ramips-mt7621-mikrotik_rbm11g-squashfs-sysupgrade.bin" to the device using scp. 2. Write openwrt to flash using "sysupgrade openwrt-ramips-mt7621-mikrotik_rbm11g-squashfs-sysupgrade.bin" Once the flashing completes the board will reboot. Disconnect from the devices ethernet port or stop the DHCP/TFTP server to prevent the device from booting via ethernet again. The device should now boot straight to OpenWrt. Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
* lantiq: enlarge AVM Fritz!Box 3370 flashMichael Kuron2018-07-042-36/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Increase the available flash memory size in AVM Fritz!Box 3370 by incorporating the unused extra partitions located after the ubi partition. Note that users upgrading from a previous OpenWRT version need to re-install from the boot loader to pick up the new partition layout. Available flash space for rootfs+overlay increases from 48MB to 124MB. Reverting to the OEM firmware is still possible (via the recovery utility provided by AVM) as the OEM firmware appears to reformat the config and nand-filesystem partitions upon first boot if necessary. The reserved-kernel and reserved-filesystem partitions are overwritten by the OEM firmware when installing an update, so their contents do not matter. Boot loader and device-specific information (MAC addresses, calibration data, etc.) are not located in NAND flash and remain unharmed by this changed. Tested with OEM firmware 06.54 on device with HWRevision 5 and Micron flash chip. Signed-off-by: Michael Kuron <m.kuron@gmx.de>
* lantiq: backport stp-xway get callback implementationMathias Kresin2018-07-041-0/+47
| | | | | | | | | | | To keep the status of a LED connected to the stp during boot, the get callback is required. If the callback is missing and the LED default state is set to keep in the devicetree, the gpio led driver errors out during load. Fixes: FS#1620 Signed-off-by: Mathias Kresin <dev@kresin.me>
* firmware-utils: tplink-safeloader: add calloc error handlingHyeonsik Song2018-07-041-0/+4
| | | | Signed-off-by: Hyeonsik Song <blogcin@naver.com>
* kernel: fix AT8032 PHY phy id maskMathias Kresin2018-07-043-13/+16
| | | | | | | | | | | | Don't mask bit 4 of the AT8022 phy id. If bit 4 of the AT8022 phy id (0x004dd023) is masked, it will match the phy id of the AR8327 switch (0x004dd033) as well. It results in applied at803x driver settings/callbacks, which will at least limit the AR8327 phys to 100MBit operation instead of the possible 1000MBit. Signed-off-by: Mathias Kresin <dev@kresin.me>
* build: ASLR hardening use $(FPIC)Kevin Darbyshire-Bryant2018-07-031-1/+1
| | | | Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* toolchain: gdb: enable TUIKevin Darbyshire-Bryant2018-07-031-1/+1
| | | | | | | | | | | The GDB Text User Interface (TUI) is a terminal interface which uses the curses library to show the source file, the assembly output, the program registers and GDB commands in separate text windows. In other words it's a friendlier interface for idiots like me! Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: bump to latest patches on 2.80rc2Kevin Darbyshire-Bryant2018-07-0319-11/+406
| | | | | | | | | | | | | | | Refresh patches and backport upstream to current HEAD: a997ca0 Fix sometimes missing DNSSEC RRs when DNSSEC validation not enabled. 51e4eee Fix address-dependent domains for IPv6. 05ff659 Fix stupid infinite loop introduced by preceding commit. db0f488 Handle some corner cases in RA contructed interfaces with addresses changing interface. 7dcca6c Warn about the impact of cache-size on performance. 090856c Allow zone transfer in authoritative mode whenever auth-peer is specified. cc5cc8f Sane error message when pcap file header is wrong. c488b68 Handle standard and contructed dhcp-ranges on the same interface. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kmod-sched-cake: bump to latest cakeKevin Darbyshire-Bryant2018-07-031-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This bumps to the latest & possibly greatest cake, sadly it's still inedible but from an SQM point of view quite tasty :-) Main tweaks since previous bump, improved ack_filter, some extra stats, support for 64bit netlink parameters (higher rates/byte counters) 0520a6c Fix NAT option handling 8da93e1 Make sure we always call qdisc_watchdog_init() in cake_init() f65daf6 Fix mismatched parenthesis 51d4ab3 Change flag handling to be safe even when mixing with non-eligible ACKs f2ea091 ack_filter: protect DCTCP with stricter filtering of ECE marks 28b4560 ACK filter: Handle wrapping sequence numbers and DSACKs 73f62d9 Use the right PAD attribute for options 5969c14 Use 32 for tin backlog e289f31 Move all the u64 netlink attributes together 36180a0 Check ACK seqno before parsing SACKs 91bbc01 Merge branch 'mine' into cobalt 58c55ec Rework SACK check to compare the ranges of two SACKs 9a5d593 ack_filter: Add proper handling of SACKs eca95d4 ack_filter: short-circuit TCP flag check d50a246 compat: backport some ktime functions 7b7ad11 compat: define tcpopt_fastopen for pre-4.1 kernels ca54cdb Fix ktime compare 9d7dcc0 ack filter: Parse TCP options and only drop safe ones b119882 Return EOPNOTSUPP on NAT option if conntrack is not available 842d7f0 Don't try to pad stats with tin_stats padding bd46dc2 Use 64-bit divide helper 8e41bf0 Make sure we never drop SACKs when filtering ACKs 66e5d60 Avoid comparing ktime_t to scalar values 7fab017 Actually commit the ktime_t changes fca6d13 Switch to ktime_t and get rid of cobalt.h 6f7e5af Can't use do_div with 64-bit divisors Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* iproute2: tc: update support for cakeKevin Darbyshire-Bryant2018-07-031-28/+83
| | | | | | | | | Bump iproute2/tc support of cake. Add support for cake's change to u64 attribute passing for certain attributes (rate & byte counts) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-08 01:34:30 +0000