aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ipq40xx: spi-gpio: convert deprecated bindingChristian Lamparter2019-06-241-2/+2
| | | | | | | The old gpio-{sck,miso and mosi} binding is deprecated in favour of {sck,miso and mosi}-gpios. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: Remove redundant LED GPIO definitions for Archer C25 v1Adrian Schmutzler2019-06-241-4/+0
| | | | Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* netfilter: fix crash in flow offload by adding netns supportHsiuWen Yen2019-06-242-3/+13
| | | | | | | | | | | | | | | | | | | | Commit fcb41decf6c6 ("config: enable some useful features on !SMALL_FLASH devices") enabled netns, which in turn lead to the crash in the flow offload target. When the flow offloading framework intends to delete a flow from the hardware table, it is necessary to retrieve the namespace from nf_flowtable->ft_net. However, no one ever wrote the namespace into nf_flowtable->ft_net in advance. So the framework will mistakenly use a NULL namespace to execute dev_get_by_index_rcu(net, ifindex), leading to the kernel panic. Ref: FS#2321 Fixes: fcb41decf6c6 ("config: enable some useful features on !SMALL_FLASH devices") Tested-by: Simon Tretter <simon@mediaarchitectu.re> Signed-off-by: HsiuWen Yen <y.hsiuwen@gmail.com> [merged patch into offload patch, fix for 4.19, SOB fix, commit subj/msg touches] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* cns3xxx: switch to kernel 4.19Koen Vandeputte2019-06-241-2/+1
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.19 to 4.19.55Koen Vandeputte2019-06-246-36/+9
| | | | | | | | | Refreshed all patches. Compile-tested on: imx6 Runtime-tested on: imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.129Koen Vandeputte2019-06-248-28/+10
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.183Koen Vandeputte2019-06-244-8/+8
| | | | | | | | | Refreshed all patches. Compile-tested on: none Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* linux-firmware: update to 20190618Christian Lamparter2019-06-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update linux-firmware to 20190618. git log --pretty=oneline --abbrev-commit 20190416..20190618 acb56f2 cavium: Add firmware for CNN55XX crypto driver. a03f1a0 linux-firmware: Update firmware file for Intel Bluetooth 22161 abb7cb6 linux-firmware: Update firmware file for Intel Bluetooth 9560 1e8253b linux-firmware: Update firmware file for Intel Bluetooth 9260 c436aaf linux-firmware: Update AMD SEV firmware 6ae3652 linux-firmware: update licence text for Marvell firmware 1884732 linux-firmware: update firmware for mhdp8546 87b35ca linux-firmware: rsi: update firmware images for Redpine 9113 chipset 55edf52 imx: sdma: update firmware to v3.5/v4.5 93d56c0 nvidia: update GP10[2467] SEC2 RTOS with the one already used on GP108 1f8ebdf linux-firmware: Update firmware file for Intel Bluetooth 8265 bccb385 linux-firmware: Update firmware file for Intel Bluetooth 9260 29a536a linux-firmware: Update firmware file for Intel Bluetooth 9560 cedd500 linux-firmware: Update firmware file for Intel Bluetooth 22161 e04cc56 amlogic: add video decoder firmwares 95a9353 iwlwifi: update -46 firmwares for 22260 and 9000 series 68040ce iwlwifi: add firmware for 22260 and update 9000 series -46 firmwares fdfb153 iwlwifi: add -46.ucode firmwares for 9000 series 92e17d0 amdgpu: update vega20 to the latest 19.10 firmware 7536c3b amdgpu: update vega12 to the latest 19.10 firmware 2579167 amdgpu: update vega10 to the latest 19.10 firmware 4ea5c73 amdgpu: update polaris11 to the latest 19.10 firmware 4475802 amdgpu: update polaris10 to the latest 19.10 firmware f9551dc amdgpu: update raven2 to the latest 19.10 firmware 9eaa40d amdgpu: update raven to the latest 19.10 firmware 3c1ab75 amdgpu: update picasso to the latest 19.10 firmware 8e3e08c linux-firmware: update fw for qat devices cdef971 Mellanox: Add new mlxsw_spectrum firmware 13.2000.1122 13d6bc8 drm/i915/firmware: Add ICL HuC v8.4.3238 1dbb095 drm/i915/firmware: Add ICL GuC v32.0.3 77b6b40 drm/i915/firmware: Add GLK HuC v03.01.2893 f8521cc drm/i915/firmware: Add GLK GuC v32.0.3 9fb9526 drm/i915/firmware: Add KBL GuC v32.0.3 3fbec60 drm/i915/firmware: Add SKL GuC v32.0.3 c7e32a1 drm/i915/firmware: Add BXT GuC v32.0.3 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: add promising "fix loop discard errors" hackChristian Lamparter2019-06-221-0/+164
| | | | | | | | | | | This patch adds a promising upstream patch that claims to help for the treated I/O errors happening on f2fs or ext4 on real block devices. |print_req_error: I/O error, dev loop1, sector 1334 Link: <https://patchwork.kernel.org/cover/10931787/> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: alx driver for AR816x/AR817x EthernetStefan Lippers-Hollmann2019-06-221-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These ethernet cards can be found onboard various x86 and x86_64 Gigabyte mainboards since the sandy-bridge/ ivy-bridge era. This driver supports the following QCA/"Killer" ethernet cards: 1969:1091 - AR8161 Gigabit Ethernet 1969:1090 - AR8162 Fast Ethernet 1969:10A1 - AR8171 Gigabit Ethernet 1969:10A0 - AR8172 Fast Ethernet 1969:E091 - Killer E2200 Gigabit Ethernet 1969:E0A1 - Killer E2400 Gigabit Ethernet 1969:E0B1 - Killer E2500 Gigabit Ethernet Successfully runtime tested with the onboard ethernet card of a Gigabyte GA-H77M-D3H ivy-bridge mainboard (x86_64/EFI image): 02:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 [...] Subsystem: Gigabyte Technology Co., Ltd AR8161 [...] Kernel driver in use: alx Kernel modules: alx alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [...] alx 0000:02:00.0 eth0: NIC Up: 1 Gbps Full Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [fix typo, shorten subject to <50 characters, shorten lines to <76 chars.]
* toolchain: musl: switch to https instead of gitChristian Lamparter2019-06-221-1/+1
| | | | | | | | | | | Daniel Engberg requested switching over to https transport since he seems to be stuck behind a corporate firewall that does all the wrong things. Rick Felker noted that this is "experimental and might break". <https://www.openwall.com/lists/musl/2019/03/27/1>. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: update WDS/4addr fix to the version accepted upstreamStefan Lippers-Hollmann2019-06-221-31/+27
| | | | | | | | | | | | | This updates "{nl,mac}80211: allow 4addr AP operation on crypto controlled devices" to the version (v3), which was accepted into upstream mac80211.git and which is tagged for -stable backporting (v4.18+). https://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git/commit/?id=33d915d9e8ce811d8958915ccd18d71a66c7c495 Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [format-patch]
* kernel: fix kmod-tpm 4.19 dependenciesChristian Lamparter2019-06-221-0/+1
| | | | | | | | | | | | This patch fixes the ath79-nand build error: |Package kmod-tpm is missing dependencies for the following libraries: |rng-core.ko by making it depend on rng-core from 4.19 onwards. This should work as 4.9 is gone so only 4.14 and 4.19 are there. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* package/network: add PKGARCH:=all to non-binary packagesDeng Qingfang2019-06-225-0/+5
| | | | | | Packages such as xfrm contain only script files, add PKGARCH:=all Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* nghttp2: deduplicate files in staging_dirEneas U de Queiroz2019-06-221-1/+1
| | | | | | | '38b22b1e: deduplicate files in libnghttp2' missed duplicates in staging_dir by Build/InstallDev. Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
* tools/bison: Update to 3.4.1Daniel Engberg2019-06-223-16/+3
| | | | | | | Update bison to 3.4.1 Remove 010-intl-stub-compat.patch Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* rpcd: add direct dependency on libjson-cJo-Philipp Wich2019-06-211-1/+1
| | | | | | | | | | | The OpenWrt buildroot ABI version rebuild tracker does not handle transient dependencies, therefor add all libraries linked by rpcd as direct dependencies to the corresponding binary package definition. This ensures that rpcd is automatically rebuilt and relinked if any of these libraries has its ABI_VERSION updated in the future. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: fix kernel_*config targets on 4.19Petr Štetiar2019-06-211-1/+1
| | | | | | | | | | | | | | | | | | | | Recent kernel versions need toolchain in order to properly configure kernel, for example to set CC_HAS_ASM_GOTO config symbol, so missing toolchain leads to the following error while running `make kernel_oldconfig` on ath79 target with 4.19 kernel in the clean tree: init/Kconfig:17: syntax error init/Kconfig:16: invalid option ./scripts/clang-version.sh: line 15: mips-openwrt-linux-musl-gcc: command not found ./scripts/gcc-plugin.sh: line 11: mips-openwrt-linux-musl-gcc: command not found net/sched/Kconfig:44: warning: menuconfig statement without prompt make[4]: *** [scripts/kconfig/Makefile:69: oldconfig] Error 1 So in order to support this new kernel versions, this patch adds toolchain as a hard dependency to the kernel_*config targets. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* fstools: block-mount: fix restart of fstab serviceKarel Kočí2019-06-212-1/+5
| | | | | | | | | | | | | | | Restarting service causes file-systems to be unmounted without being mounted back. When this service was obsoleted it should have been implemented in a way that all actions are ignored. Up to this commit default handler was called when restart was requested. This default handler just simply calls stop and start. That means that stop called unmount but start just printed that this service is obsoleted. This instead implements restart that just prints same message like start does. It just calls start in reality. This makes restart unavailable for call. Signed-off-by: Karel Kočí <karel.koci@nic.cz>
* metadata: handle ABI version rebuild tracking for transient dependenciesJo-Philipp Wich2019-06-212-9/+33
| | | | | | | | | | | | Extend the packageauxvars database to keep a list of possible package dependencies for each provider, then utilize this information in buildroot to resolve the ABI version dependencies of dependent packages up to five levels deep. This should properly trigger rebuilds for packages indirectly depending on other packages whose ABI_VERSION changed. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* base-files: apply new sysctl.conf at postinstYousong Zhou2019-06-212-14/+21
| | | | | | | | | | | | | | | | This is mainly for kmod-br-netfilter. To turn off bridge-netfilter-call-xxx immediately after installation While at it - Define filelist="/usr/lib/opkg/info/${pkgname}.list" - Reuse "[ -z "$root" ]" - Grep with "-m1" Fixes FS#2300 Reported-by: Marco Sartorius <tidbits@ormoorgmen.info> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* iproute2: update ctinfo supportKevin Darbyshire-Bryant2019-06-201-10/+5
| | | | | | | | Follow upstream changes - header file changes only no functional or executable changes, hence no package bump required Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: update act_ctinfoKevin Darbyshire-Bryant2019-06-202-20/+58
| | | | | | | Follow upstream changes - header file changes no executable difference at all Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* gemini: Fix up DNS-313 compatible stringLinus Walleij2019-06-202-1/+22
| | | | | | | | | It's a simple typo in the DNS file, which was pretty serious. No scripts were working properly. Fix it up. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [integrate upstream patch into openwrt target]
* kernel: dm: add dm-raid for LVM raidChris Koying Browet2019-06-201-1/+23
| | | | | | | This adds the dm-raid kmod, which is needed for LVM builtin raid configurations, aka "MD-over-LVM" Signed-off-by: Chris Koying Browet <cbro@semperpax.com>
* hostapd: remove stale WPA_SUPPLICANT_NO_TIMESTAMP_CHECK optionChristian Lamparter2019-06-202-26/+0
| | | | | | | | | | Support to disable the timestamp check for certificates in wpa_supplicant (Useful for devices without RTC that cannot reliably get the real date/time) has been accepted in the upstream hostapd. It's implemented in wpa_supplicant as a per-AP flag tls_disable_time_checks=[0|1]. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: package Broadcom BNX2X driverPetko Bordjukov2019-06-206-1/+32
| | | | | | | | | | bnx2x driver support for the x86 architecture. Includes module and firmware for Broadcom QLogic 5771x/578xx 10/20-Gigabit ethernet adapters. Signed-off-by: Petko Bordjukov <bordjukov@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [added +kmod-lib-zlib-inflate as well]
* ipq40xx: Linksys: sysupgrade: Ensure OEM volumes are removedJeff Kletsky2019-06-201-20/+22
| | | | | | | | | | | | | | | | | | When OEM volumes are present in the [alt_]firmware partition, sysupgrade will write a new kernel, but will fail to write the root file system. The next boot will hang indefinitely Waiting for root device /dev/ubiblock0_0... Modified ipq40xx/base-files/lib/upgrade/linksys.sh to remove both `squashfs` and `ubifs` if found on the target firmware partition's UBI device. Run-tested-on: Linksys EA8300 Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [applied some shellcheck suggestions as well]
* base-files: fix uci led oneshot/timer triggerRobinson Wu2019-06-201-0/+1
| | | | | | | | | | | | | This patch adds a missing type property. This fixes the creation of oneshot and timer led triggers like: | ucidef_set_led_timer "system" "system" "zhuotk:green:system" "1000" "1000" from /etc/init.d/01_leds. Fixes: b06a286a4861 ("base-files: cleanup led functions in uci-defaults.sh") Signed-off-by: Robinson Wu <wurobinson@qq.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: fix bogus key-presses on bootChristian Lamparter2019-06-206-0/+67
| | | | | | | | | | | | | | | | | | | | | | | "There are often transient line events when the system is powered up and initialized and it is often necessary for the gpio_chip driver to clear any interrupt flags in hardware before setting up the gpio chip, especially the irqchip portions of it." <http://lists.infradead.org/pipermail/openwrt-devel/2019-June/017630.html> This patch adds a fix for the APM821XX's interrupt controller to clear any bogus pending toggled interrupts that happens on various APM821XX boards on boot. The patch also changes the debouce-interval from the default 5ms debounce interval to 60ms all around. The default setting caused on occasions that the button state became stuck in a pressed state, even though the button was released. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* uhttpd: add direct dependency on libjson-cJo-Philipp Wich2019-06-201-1/+1
| | | | | | | | | | | The OpenWrt buildroot ABI version rebuild tracker does not handle transient dependencies, therefor add all libraries linked by uhttpd as direct dependencies to the corresponding binary package definition. This ensures that uhttpd is automatically rebuilt and relinked if any of these libraries has its ABI_VERSION updated in the future. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* scripts/config: fix *c_shipped build depency trackingJonas Gorski2019-06-201-4/+4
| | | | | | | | | | | | | The Makefile was missing dependencies on *c_shipped, so changes never triggered a rebuild. Add these as optional dependencies so their absence isn't treated as an error. In addition, fix a typo preventing the zconf.lex.o from being removed on clean. Fixes: 9d5510a500a1 ("build: add new menuconfig code based on linux 3.9") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Jo-Philipp Wich <jo@mein.io>
* kernel: bump 4.19 to 4.19.53Koen Vandeputte2019-06-203-7/+7
| | | | | | | | | Refreshed all patches. Compile-tested on: imx6 Runtime-tested on: imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.128Koen Vandeputte2019-06-2011-24/+24
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: generic: fix MIPS build on non-linux hostsKevin Darbyshire-Bryant2019-06-201-0/+62
| | | | | | | | | | | | | | | | | | | | calc_vmlinuz_load_addr.c requires SZ_64K to be defined for alignment purposes. It included "../../../../include/linux/sizes.h" to define that size, however "sizes.h" tries to include <linux/const.h> which assumes linux system headers. These may not exist eg. the following error was encountered when building Linux for OpenWrt under macOS: In file included from arch/mips/boot/compressed/calc_vmlinuz_load_addr.c:16: arch/mips/boot/compressed/../../../../include/linux/sizes.h:11:10: fatal error: 'linux/const.h' file not found Change makefile to force building on local linux headers instead of system headers. Also change eye-watering relative reference in include file spec. Thanks to Jo-Philip Wich & Petr Štetiar for assistance in tracking this down & fixing. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* metadata: ensure one dependency provider to be y if a package is yJonas Gorski2019-06-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | When there are multiple packages providing a meta-package, it is possible to to create a config where a package is selected as =y, but all of its dependency providers are just selected as =m. This is due to the selection statement being just config PACKAGE_foo select PACKAGE_bar if !PACKAGE_baz which is already fulfilled by PACKAGE_bar=m. Fix this by properly comparing the selection states: config PACKAGE_foo select PACKAGE_bar if PACKAGE_baz<PACKAGE_foo Also invert the select conditions to improve readability. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> [slightly reword commit message] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* treewide: fix syntax errors exposed after kconfig updateJo-Philipp Wich2019-06-208-13/+13
| | | | | | | | | | | | | | After commit e82a4d9cfb ("config: regenerate *_shipped sources") the mconf parser became more strict as a side effect and started to spew a series of warnings when evaluating our generated kconfig sources: tmp/.config-package.in:705:warning: ignoring unsupported character '@' The root cause of these warnings is a wrong use of the @SYMBOL dependency syntax in various Makefile. Fix the corresponding Makefiles by turning `@SYM||@SYM2` expressions into the proper `@(SYM||SYM2)` form. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* config: fix relational operators for bool and tristate symbolsNicolas Pitre2019-06-201-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 31847b67bec0 ("kconfig: allow use of relations other than (in)equality") it is possible to use relational operators in Kconfig statements. However, those operators give unexpected results when applied to bool/tristate values: (n < y) = y (correct) (m < y) = y (correct) (n < m) = n (wrong) This happens because relational operators process bool and tristate symbols as strings and m sorts before n. It makes little sense to do a lexicographical compare on bool and tristate values though. Documentation/kbuild/kconfig-language.txt states that expression can have a value of 'n', 'm' or 'y' (or 0, 1, 2 respectively for calculations). Let's make it so for relational comparisons with bool/tristate expressions as well and document them. If at least one symbol is an actual string then the lexicographical compare works just as before. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [rebased against OpenWrt kconfig, slightly reword commit message] (backported from upstream 9059a3493efea6492451430c7e2fa0af799a2abb) Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* config: regenerate *_shipped sourcesJonas Gorski2019-06-202-243/+302
| | | | | | | | | | | | The pregenerated `zconf.hash.c` and `zconf.lex.c` files have not been kept in sync with their respective `*.y` and `*.l` sources in the past causing our kconfig implementation to not recognize important kconfig grammer elements such as relational `<`, `<=`, `>` and `>=` operators. Fixes: 2d7e602381f3 ("scripts/config: sync with latest linux upstream") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> [reword commit message] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* procd: add direct dependencies on libblobmsg-json and libjson-cJo-Philipp Wich2019-06-201-1/+1
| | | | | | | | | | | | The OpenWrt buildroot ABI version rebuild tracker does not handle transient dependencies, therefor add all libraries linked by procd as direct dependencies to the corresponding binary package definition. This ensures that procd is automatically rebuilt and relinked if any of these libraries has its ABI_VERSION updated in the future. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: fix EW-7478AC model name in DTSPetr Štetiar2019-06-201-1/+1
| | | | | | | | This fixes lower case AC in the DTS model name. Fixes: 88f7a29f99fb ("ramips: add support for Edimax EW-7476RPC / EW-7478AC") Reported-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* netsupport: add kmod-nshYousong Zhou2019-06-201-0/+17
| | | | | | This is required by kmod-openvswitch since linux 4.15. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ath79: correct various phy-mode propertiesDavid Bauer2019-06-206-4/+8
| | | | | | | | | | | | | | | | | | | | Upstream commit 6d4cd04 changes how the internal delays of the AR803x based PHYs are enabled. With this commit, all internal delays are disabled on driver probe and enabled based on the 'phy-mode' property in the device-tree. Before this commit, the RX delay was always enabled upon soft-reset while the TX delay retained it's previous state. A hard reset enabled the RX delay while the TX delay was disabled. Because of this inconsistency, wrongly specified PHY-modes were working correctly while the hardware was in a different state. Fix the PHY-modes of some affected devices (and clean up misplaced properties along the way) to keep the devices working flawlessly with kernels >= 5.1. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: fix GELAN port in D-Link DWR-118-A2Pawel Dembicki2019-06-202-5/+7
| | | | | | | This patch fix and enable GELAN port in D-LINK DWR-118-A2. Tested-by: Richard Toth <trtk1992@gmail.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ramips: mt7620: add EPHY base mdio address changing possibilityPawel Dembicki2019-06-202-46/+62
| | | | | | | | | | | In some boards is requred to change the ephy mdio base address. This patch add of property "mediatek,ephy-base-address" in gsw part, which allows to change ephy base address. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [fixed indentation in header file] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ramips: mt7620: fix external PHY autopollingPawel Dembicki2019-06-201-4/+6
| | | | | | | | | | | | | | | | | The port initialisation is based on assumption that phy address and port number is the same. SoC allow different numbers and some board have it. Use phy address instead the port number to make sure that correct addresses are polled. In situation when only one PHY with address 0x0 is conected to port 4, autopolling is broken. This patch make autopolling correct when port number and phy address are different. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ramips: handle mdio address and switch port seperateMathias Kresin2019-06-204-11/+14
| | | | | | | | | | | | | | | The phy handling code forces a phy mdio address and the switch port to which a phy is attached to be the same. Albeit such a configuration is used for most boards, it isn't for all. Pass the switch port number to the ethernet phy connect functions, to ensure the correct list entry is edited and not the list entry that matches th phys mdio address. Use the mdio address with mdiobus_get_phy instead of the port number, to make sure the expected ethernet phy gets connected. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: ignore already handled ethernet physMathias Kresin2019-06-201-2/+8
| | | | | | | | | | | | The whole logic in fe_phy_connect() is based on the asumption that mdio address and switch port id are equal. Albeit it is true for most boards, it doesn't is for all. It isn't yet clear which subtargets/boards require the devicetree less ethernet phy handling. Hence change the code in a way that it doesn't touch ethernet phys which were early attached and are already handled. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add support for Edimax EW-7478APCBirger Koblitz2019-06-203-1/+216
| | | | | | | | | | | | | | | | | | | | | | | | | | | | SoC: MediaTek MT7620a @ 580MHz RAM: 64M (Winbond W9751G6KB-25) FLASH: 8MB (Macronix) WiFi: SoC-integrated: MediaTek MT7620a bgn WiFi: MediaTek MT7612EN nac Switch: Mediatek MT7530W Gigabit Switch (4 x LAN, 1 x WAN) USB: Yes 1 x 2.0 (+ 1 x 2.0 unpopulated header) BTN: Reset/WPS LED: - Power (white) - Internet (blue) - Wifi (blue) - USB (blue) UART: UART is present as Pads with throughholes on the PCB. They are located in the lower right corner (GbE ports facing up) 3.3V - RX - GND - TX / 57600-8N1 3.3V is the square pad Installation ------------ Update the factory image via the web-interfaces (by default: http://edimax.setup) Signed-off-by: Birger Koblitz <mail@birger-koblitz.de> [merge conflicts in 01_leds and mt7620.mk, dts whitespace issues] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ramips: add support for Edimax EW-7476RPC / EW-7478ACBirger Koblitz2019-06-207-0/+349
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SoC: MediaTek MT7620a @ 580MHz RAM: 64M (Winbond W9751G6KB-25) FLASH: 8MB (Macronix) WiFi: SoC-integrated: MediaTek MT7620a bgn WiFi: MediaTek MT7612EN nac GbE: 1x (RTL8211E) BTN: WPS - RFKILL/RF 50%/RF 100% toggle LED: - Wifi 5g (blue) - Wifi 2g (blue) - Crossband (green) - Power (green) - WPS (green) - LAN (Green) UART: UART is present as Pads with throughholes on the PCB. They are located next to the switch for the wifi configuration 3.3V - RX - GND - TX / 57600-8N1 3.3V is the square pad Installation ------------ Update the factory image via the web-interfaces (by default: 192.168.9.2/24). http://192.168.9.2/index.asp ramips: add Edimax EW-7478AC SoC: MediaTek MT7620a @ 580MHz RAM: 64M (Winbond W9751G6KB-25) FLASH: 8MB (Macronix) WiFi: SoC-integrated: MediaTek MT7620a bgn WiFi: MediaTek MT7612EN nac GbE: 1x (RTL8211E) BTN: WPS - RFKILL/RF 50%/RF 100% toggle LED: - Wifi 5g (blue) - Wifi 2g (blue) - Crossband (green) - Power (green) - WPS (green) - LAN (Green) UART: UART is present as Pads with throughholes on the PCB. They are located next to the switch for the wifi configuration 3.3V - RX - GND - TX / 57600-8N1 3.3V is the square pad Installation ------------ Update the factory image via the web-interfaces (by default: http://edimaxext.setup) Or push wpa button on power on and send firmware via tftp to 192.168.1.6 The EW-7478AC is identical to the EW-7476RPC, except instead of 2 internal antennas it has 2 external ones. Signed-off-by: Birger Koblitz <mail@birger-koblitz.de> [merge conflict in 01_leds] Signed-off-by: Petr Štetiar <ynezz@true.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-04 09:11:09 +0000