aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ath79: fix PQI Air Pen supportMathias Kresin2018-10-281-0/+0
| | | | | | Use the correct dts filename. It has to be <soc>_<manufacturer>_<device>. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath79: add support for PQI Air PenYuheiOKAWA2018-10-284-0/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SoC: AR9330 (or AR9331 revision?) Ethernet x1, Wireless 2.4G, uSD card slot x1. USB Power, include Li-Po Battery. Flash 8MiB. (factory is dual image) 1. write image is use half 4MiB size from factory. write initramfs image to mtd6 and mtd7. 2. change next boot setting. next is mtd6 boot. echo -ne "\x01" | dd of=/dev/mtdblock8 conv=notrunc bs=1 count=1 seek=0 3. rewrite sysupgrade image. change next boot setting. next is mtd4. echo -ne "\x00" | dd of=/dev/mtdblock8 conv=notrunc bs=1 count=1 seek=0 OEM mtd. dev: size erasesize name mtd0: 00040000 00010000 "u-boot" mtd1: 00010000 00010000 "u-boot-env" mtd2: 00010000 00010000 "ART" mtd3: 00010000 00010000 "NVRAM" mtd4: 00140000 00010000 "uImage" mtd5: 00280000 00010000 "rootfs" mtd6: 00140000 00010000 "uImage2" mtd7: 00280000 00010000 "rootfs2" mtd8: 00010000 00010000 "CONF" Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>
* ath79: Add support for Ubiquiti LiteAP ac (LAP-120)Roger Pueyo Centelles2018-10-284-0/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the Ubiquiti LiteAP ac (LAP-120), an outdoor 5 GHz AC access point with an integrated 120° 16 dBi antenna. The device was previously known as LiteBeam AP ac but was later rebranded. CPU: Atheros AR9342 SoC RAM: 64 MB DDR2 Flash: 16 MB NOR SPI Ports: 1 GbE port (PoE in) WLAN: 5 GHz QCA899X (PCI) The integrated QCA899X is a Ubiquiti branded part with modified vendor and product id (0777:11ac9). It is very similar to the NanoStation loco AC, except for the 2.4 GHz management radio (missing here). Installation procedure is the same as the NanoStation [loco] AC: 1. Connect to serial header on device 2. Power on device and enter uboot console 3. Set up tftp server serving an openwrt initramfs build 4. Load initramfs build using the command tftpboot in the uboot cli 5. Boot the loaded image using the command bootm 6. Copy squashfs openwrt sysupgrade build to the booted device 7. Use mtd to write sysupgrade to partition "firmware" 8. Reboot and enjoy Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* mt76: update to the latest versionFelix Fietkau2018-10-271-3/+3
| | | | | | fdc63f1 mt76: fix regression in tx status handling Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: Fix dependencies for PCI supportDaniel Engberg2018-10-261-5/+5
| | | | | | | | | | USB support doesn't necessarily mean that there's PCI support available so move that to the drivers which requires PCI support. This applies to the sunxi platform for instance. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> Signed-off-by: Felix Fietkau <nbd@nbd.name> [fix mt76x0e]
* mt76: update to the latest versionFelix Fietkau2018-10-251-3/+3
| | | | | | | | | | | 0b8b15f mt7603: use common mmio mcu struct d612e2e mt76: mt76x02: skip station tx status for non-sta wcid entries d89d84b mt76: mt76x02: only override control->sta on sw-encrypted tx 9d59d2a mt76: add support for reporting tx status with skb ed17ba2 mt7603: use common tx status handling code 14b6c59 mt76x0: use band parameter for LC calibration Signed-off-by: Felix Fietkau <nbd@nbd.name>
* grub2: fix regression caused by binutils-2.31.1Philip Prindeville2018-10-252-1/+76
| | | | | | | | | | | | | grub-efi no longer works: grub-mkimage: error: relocation 0x4 is not implemented yet. See: http://git.savannah.gnu.org/cgit/grub.git/commit/util?id=842c390469e2c2e10b5aa36700324cd3bde25875 Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>i [PKG_RELEASE increase]
* mwlwifi: driver version to 10.3.8.0-20181022Jonathan Lancett2018-10-241-3/+3
| | | | | | | | | | | | Upgrade 88W8997 firmware to 8.4.0.52. Removed unnecessary firmware settings. Added vendor events. Fixed crash problem when module is removed. Modified the code to protect tx queues. Signed-off-by: Jonathan Lancett <j.lancett@ntlworld.com> [tidy commit message] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* glibc: update to latest 2.27 commit (BZ #23562, BZ #23275)Hans Dedecker2018-10-231-2/+2
| | | | | | | 77b4b8231e signal: Use correct type for si_band in siginfo_t [BZ #23562] 5bdb6897fc Fix race in pthread_mutex_lock while promoting to PTHREAD_MUTEX_ELISION_NP [BZ #23275] Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mt76: update to the latest versionFelix Fietkau2018-10-231-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | d033272 mt76: mt76x0: handle chip specific initval differences 1a2b2dc mt76: usb: fix static tracepoints 11151f4 mt76x0: antenna select corrections dade109 mt76x0: init: simplify mt76x0_init_mac_registers 3c54612 mt76x0: pci: add missing MODULE_FIRMWARE macro 97e0269 mt76x0: mac: remove mt76x0_mac_set_ampdu_factor 5d8c4bf mt76x0: align mt76x0u and mt76x0e fw version d4391ae mt76: move mt76x02_mac_set_short_preamble in mt76x02_mac.c aa6ebf9 mt76: move mt76x02_init_device in mt76x02-lib module a4a08c3 mt76: move mac beacon routines in mt76x02-lib module 6b69650 mt76: move tx beacon routines in mt76x02-lib module 8486047 mt76x0: pci: add pre_tbtt_tasklet support acd4c99 mt76: move mt76x02_sw_scan and mt76x02_sw_scan_complete in mt76x02-lib module 2d736cf mt76: move mt76x02_get_txpower in mt76x02_util.c aa1d6bd mt76: move mt76x02_sta_ps in mt76x02-lib module e684281 mt76: introduce mt76x02_init_beacon_config routine c181d97 mt76x0: pci: enable AP support 3b86d99 mt76: move mt76x02_set_tx_ackto in mt76x02-lib module 41d7ef7 mt76x0: update init vals for MT_TX_PROT registers fe5a149 mt76: move tx protection routines in mt76x02-lib module 5bca2de mt76: move mt76x02_bss_info_changed in mt76x02-lib module d21a835 mt76: move dfs support in mt76x02-lib module ba9d424 mt76x0: pci: add DFS support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add missing symbol for target bcm53xxKoen Vandeputte2018-10-231-0/+1
| | | | | | | Fixes: ca88f4153f8f ("kernel: bump 4.14 to 4.14.77") Reported-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* bcm53xx: use upstream SPI controller fixRafał Miłecki2018-10-231-3/+5
| | | | | | This just moves patch to use 0xx prefix and includes maintainer's s-o-b. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump 4.14 to 4.14.78Koen Vandeputte2018-10-226-59/+11
| | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 050-net-emac-fix-fixed-link-setup-for-the-RTL8363SB-swit.patch Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.135Koen Vandeputte2018-10-223-13/+13
| | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2018-10883 Compile-tested on: ar71xx, layerscape Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* fstools: update to git HEADHans Dedecker2018-10-211-3/+3
| | | | | | 29e53af fstools: add ntfs support Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mac80211: hermes-pcmcia: add missing dependency to kmod-pcmcia-coreHauke Mehrtens2018-10-211-1/+1
| | | | | | This fixes a build problem on x86. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* linux-firmware: intel: Add iwl 9000 and 9260 firmwareHauke Mehrtens2018-10-201-0/+14
| | | | | | | Add the most recent supported firmware file for the Intel 9000 and 9260 wireless chips. The API version 41 is not yet supported by the driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* linux-firmware: intel: update firmware files for 7265D, 8000C and 8265Hauke Mehrtens2018-10-201-3/+3
| | | | | | Use more recent versions for the Intel wireless chips 7265D, 8000C and 8265. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mpc85xx: workaround 4.14 cross compile issueRyan Mounce2018-10-201-0/+10
| | | | | | | | | | | Regression introduced with 4.10 by 43c9127d94d62a232ed33ed2eab8a08657ce5472 Build will fail if system 'ar' does not support deterministic builds. e.g. macOS with Xcode toolchain Appears to be fixed upstream in 4.18 by af3901cbbd3de182aafb8ee553c825c0074df6a2 Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
* tools/pkg-config: pass arguments at the endArthur Skowronek2018-10-201-1/+1
| | | | | | | | | | | | | | | | | | Go for openwrt passes pkg-config arguments in the format of pkg-config --cflags -- pkg-name which in turn will be passed down to the real pkg-config as something like pkg-config.real --cflags -- pkg-name --define... and causes the real pkg-config implementation to missinterpret the given argument list. This also helps to fix https://github.com/golang/go/issues/27940 Signed-off-by: Arthur Skowronek <arthur.skowronek@tuta.io>
* mwlwifi: driver version to 10.3.8.0-20181008Yufei Miao2018-10-201-3/+3
| | | | Signed-off-by: Yufei Miao <myf@myf.cloud>
* kernel/modules: Aosong AM2315/AM2320 IIO kernel module support enabled.Roman Bazalevskiy2018-10-201-0/+13
| | | | Signed-off-by: Roman Bazalevskiy <rvb@rvb.name>
* kernel/modules: add kmod-fou6 packageDeng Qingfang2018-10-201-0/+21
| | | | | | IPv6 support for Foo-over-UDP tunnel Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* linux-firmware: Update linux-firmware to 2018-10-18Robert Marko2018-10-201-4/+4
| | | | | | | | | | | | | | | Kalles ath10k PR was finally merged so update linux-firmware to include those changes. This is needed since disabling ath10k-firmware a lot of custom BDF-s in board-2.bin-s are not available in previously outdated linux-firmware board-2.bin-s. This also includes support for boards currently using ipq-wifi and other WIP ones. Runtime tested on 8devices Jalapeno. Signed-off-by: Robert Marko <robimarko@gmail.com>
* apm821xx: add disk-activity triggers via DT.Christian Lamparter2018-10-203-5/+2
| | | | | | | | The WNDR4700 and the MBL have a dedicated HDD activity LED. This patch adds the default led triggers to the DTS and removes the entries in 01_leds. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: apm82181.dtsi overhaulChristian Lamparter2018-10-201-135/+139
| | | | | | | | | | | | | | | | | | | - order entries by mmio address where possible - switch to lower-case address values - comment on BSP u-boot behaviour in regards to what it edits and look for - annotate irq lines with the help of interrupt-names - remove deprecated "device_type" properties The pci and network device_type had to stay since they are required by the drivers and u-boot. the cpu and memory device_types will remain as well as they are still part of the DT Spec. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: force WNDR4700 console to 115200n8Christian Lamparter2018-10-201-1/+1
| | | | | | | | | | | | | | | | | | | With the upcoming 4.19 release, the serial console on the Netgear WNDR4700 would no longer work as it is never really set and always relied on the kernel's serial code not to change the baud rate. On the stock firmware, Netgear forced the console setting through a custom CONFIG_CMDLINE in their kernel to 115200. Normally, they should have done it in a different way and just passed the baudrate through a "console=..." kernel parameter via the bootargs in the "/chosen" dt node. But in their default u-boot bootcmd setting, they somehow forgot to add the "run addtty", so there's no easy way to pass the baudrate from u-boot to the kernel. So it has to be forced as otherwise it ends up as 9600 baud. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: set uart compatible to ns16750Christian Lamparter2018-10-201-6/+11
| | | | | | | The APM821XX/PPC460EX datasheet mentions: "Register compatibility with 16750 register set" Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* build: remove obsolete -rc kernel testing rewritesChristian Lamparter2018-10-201-2/+1
| | | | | | | | | The -rcX "testing" kernels are no longer hosted on cdn.kernel.org file servers directly in a "testing" directory. Therefore the logic that tested for "-rc" can be removed. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* gemini: Fix up image generationLinus Walleij2018-10-201-6/+10
| | | | | | | | | | | | | | | I noticed that the image generator for the Gemini generates some 10+ MB files for the second (application) partition. This is just wrong. The first 6144K partition named initramfs easily fits OpenWRTs squashfs,jffs2 overlayed partitions with nice headroom for storing configuration files. Generate a blank partition for the hddapp.tgz file and delete it after generating the firmware image - when performing updates manually you just want the "rd.z" file around anyways. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: Break out USB to packagesLinus Walleij2018-10-204-8/+17
| | | | | | | | | | | | This creates a new kernel package for the fotg210 host controller and uses that with the gemini to shrink the kernel. The SQ201 needs the USB2 PCI package as well. The build system required me to make kernel_oldconfig beofore it would build without errors so some minor unrelated Kconfig entries are changed. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* kernel: Add support for Winbond w25q128jv SPI NOR flashBaptiste Jonglez2018-10-206-9/+77
| | | | | | | | | | | | | | | | | Newer batches of several Mikrotik boards contain this yet-unsupported flash chip, for instance: - rb941-2nd (hAP lite) - rb952ui-5ac2nd (hAP ac lite) - RBM33G and probably other Mikrotik boards need this patch as well. The patch was submitted upstream by Robert Marko: https://patchwork.ozlabs.org/patch/934181/ Closes: FS#1715 Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org> Cc: Robert Marko <robimarko@gmail.com>
* toolchain/musl: Don't override optimization set by upstreamDaniel Engberg2018-10-201-2/+5
| | | | | | | | | | Don't override optimization set by upstream. Provides a speed increase for internal (library), malloc and string operations in musl. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> [add : to PKG_RELEASE release variable for consistency] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: bump to v2.80Kevin Darbyshire-Bryant2018-10-191-4/+4
| | | | | | | | | | dnsmasq v2.80 release Change from rc1: 91421cb Fix compiler warning. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: bump 4.14 to 4.14.77Koen Vandeputte2018-10-1923-30/+41
| | | | | | | | | | | | | | | Refreshed all patches. Altered patches: - 666-Add-support-for-MAP-E-FMRs-mesh-mode.patch New symbol for arm targets: - HARDEN_BRANCH_PREDICTOR Compile-tested on: ar71xx, cns3xxx, imx6 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.134Koen Vandeputte2018-10-199-35/+35
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx, layerscape Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* iproute2: install ip-tiny and ip-full in /usr/libexecHans Dedecker2018-10-181-7/+7
| | | | | | | Install the ip-tiny and ip-full variants in /usr/libexec as the suffixed ip variants are not meant to be called directly Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mt76: update to the latest versionFelix Fietkau2018-10-181-3/+3
| | | | | | | | | | | b51337a mt76: clean up unused leftover EXPORT_SYMBOLs 383b228 mt76x0: reduce duplication in setting rf bandwidth parameters a1a4528 mt76: mt76x0: handle chip specific initval differences f473340 mt76: usb: fix static tracepoints 3a975b4 mt76x0: antenna select corrections 37c1150 mt76x0: init: simplify mt76x0_init_mac_registers Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wireguard: bump to 0.0.20181018Jason A. Donenfeld2018-10-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | ba2ab5d version: bump snapshot 5f59c76 tools: wg-quick: wait for interface to disappear on freebsd ac7e7a3 tools: don't fail if a netlink interface dump is inconsistent 8432585 main: get rid of unloaded debug message 139e57c tools: compile on gnu99 d65817c tools: use libc's endianness macro if no compiler macro f985de2 global: give if statements brackets and other cleanups b3a5d8a main: change module description 296d505 device: use textual error labels always 8bde328 allowedips: swap endianness early on a650d49 timers: avoid using control statements in macro db4dd93 allowedips: remove control statement from macro by rewriting 780a597 global: more nits 06b1236 global: rename struct wireguard_ to struct wg_ 205dd46 netlink: do not stuff index into nla type 2c6b57b qemu: kill after 20 minutes 6f2953d compat: look in Kbuild and Makefile since they differ based on arch a93d7e4 create-patch: blacklist instead of whitelist 8d53657 global: prefix functions used in callbacks with wg_ 123f85c compat: don't output for grep errors Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* ar71xx/ath79: fix mtd corruptionFabio Bettoni2018-10-173-3/+131
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit fec8fe806963 ("kernel: bump 4.9 to 4.9.116") [1], the following patch for removed: - 403-mtd_fix_cfi_cmdset_0002_status_check.patch This patch contained fixes for both write and erase functions. While the chip-detects for erase got fixed upstream [2], some modifications are still required, even with the fixes applied. While at it, also apply the same fix for target ath79, which suffers the same issue. Not doing so results in following errors seen: Collected errors: * pkg_write_filelist: Failed to open //usr/lib/opkg/info/luci-lib-ip.list: I/O error. * opkg_install_pkg: Failed to extract data files for luci-lib-ip. Package debris may remain! * opkg_install_cmd: Cannot install package luci-ssl. * opkg_conf_write_status_files: Can't open status file //usr/lib/opkg/status: I/O error. [ 0.780920] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 8.406396] jffs2: notice: (415) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 8.423476] mount_root: switching to jffs2 overlay [ 270.902671] jffs2: Write of 1989 bytes at 0x005ce6f8 failed. returned -5, retlen 962 [ 270.931965] jffs2: Write of 1989 bytes at 0x005ceec0 failed. returned -5, retlen 0 [ 270.939631] jffs2: Not marking the space at 0x005ceec0 as dirty because the flash driver returned retlen zero [ 270.950397] jffs2: Write of 68 bytes at 0x005ceec0 failed. returned -5, retlen 0 [ 270.957838] jffs2: Not marking the space at 0x005ceec0 as dirty because the flash driver returned retlen zero [ 270.968584] jffs2: Write of 68 bytes at 0x005ceec0 failed. returned -5, retlen 0 [ 270.976027] jffs2: Not marking the space at 0x005ceec0 as dirty because the flash driver returned retlen zero [ 270.986735] jffs2: Write of 68 bytes at 0x005ceec0 failed. returned -5, retlen 0 [ 270.994225] jffs2: Not marking the space at 0x005ceec0 as dirty because the flash driver returned retlen zero [1] https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=fec8fe806963c96a6506c2aebc3572d3a11f285f [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v4.9.133&id=a0239d83e1cb60de5e78452d4708c083b9e3dcbe Fixes: fec8fe806963 ("kernel: bump 4.9 to 4.9.116") Signed-off-by: Fabio Bettoni <fbettoni@gmail.com> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: Move some targets to tinyKoen Vandeputte2018-10-174-3/+3
| | | | | | | | | | | | | | | | | | | Recent changes on ar71xx (switch to 4.14, memory compaction, ...) cause an increase in kernel size, making it too big for some devices. Move these devices to the tiny target, where kernel symbols and optimization for speed are disabled, reducing the kernel size. Devices: - EnGenius ENS202EXT - OCEDO Koala Compile-tested targets: - ar71xx->generic->default - ar71xx->smallFlash->Default Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* netifd: update to latest git HEADHans Dedecker2018-10-171-3/+3
| | | | | | | 841b5d1 system-linux: enable by default ignore encaplimit for grev6 tunnels 125cbee system-linux: fix a typo in gre tunnel data parsing logic Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* gre: make encaplimit support configurableHans Dedecker2018-10-172-2/+4
| | | | | | | | | | | Make inclusion of the destination option header containing the tunnel encapsulation limit configurable for IPv6 GRE packets. Setting the uci parameter encaplimit to ignore; allows to disable the insertion of the destination option header in the IPv6 GRE packets. Otherwise the tunnel encapsulation limit value can be set to a value from 0 till 255 by setting the encaplimit uci parameter accordingly. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* tools/xz: Add PKG_CPE_ID for proper CVE trackingRosen Penev2018-10-161-0/+1
| | | | Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/libressl: Add PKG_CPE_ID for proper CVE trackingRosen Penev2018-10-161-0/+2
| | | | Signed-off-by: Rosen Penev <rosenp@gmail.com>
* treewide: use wpad-basic for not small flash targetsMathias Kresin2018-10-1665-130/+144
| | | | | | | | | | | | Add out of the box support for 802.11r and 802.11w to all targets not suffering from small flash. Signed-off-by: Mathias Kresin <dev@kresin.me> Mathias did all the heavy lifting on this, but I'm the one who should get shouted at for committing. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* hostapd: add basic variantKevin Darbyshire-Bryant2018-10-165-1/+1017
| | | | | | | | Add a basic variant which provides WPA-PSK only, 802.11r and 802.11w and is intended to support 11r & 11w (subject to driver support) out of the box. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ppp: don't start ppp with IPv6 support if ipv6 is not supportedRosy Song2018-10-162-5/+8
| | | | | Signed-off-by: Rosy Song <rosysong@rosinson.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mt76: update to the latest version, add mt76x0 firmware, enable mt76x0eFelix Fietkau2018-10-161-3/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 96fa353 mt76: do not store aggregation sequence number for null-data frames c50dca8 mt76x0: print BBP version only for debug ddc9e05 mt76x0: correct RF access via RF_CSR register. 02d2385 mt76: allow to identify bus c438e67 mt76x0: correct RF reg pairs write for PCIe c83abb8 mt76x0: use bus helper to identify rf access method 9c272ff mt76x0: phy: fix bank check in mt76x0_rf_csr_{wr,rr} 1945d57 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mcu.c 214eab7 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_phy.c 29bc2ae mt76: use mt76x02_dev instead of mt76_dev in mt76x02_util.c 08ecb5f mt76: use mt76x02_dev instead of mt76_dev in mt76x02_usb_mcu.c fd9b2b0 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mac.c f37bd25 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_txrx.c 48950cb mt76: use mt76x02_dev instead of mt76_dev in mt76x02_eeprom.c 06276cc mt76x0: pci: report firmware version using ethtool 72546ed mt76x0: pci: add missing mac80211 callbacks 4de98cd mt76: disable ldpc coding for mt76x0 devices f0951c2 mt76x0: pci: add mt76x0_register_device in mt76x0e_register_device 4f3685e mt76: reserve enough room for USB tx skbs 5e6907f mt76x0: remove dma.h acfc5a9 mt76x0: pci: fix set external PA I/O current 2b79bb7 mt76: mt76x0e: another fix for the external PA current setting 8a0acfd mt76x0: phy: fix restore phase in mt76x0_phy_recalibrate_after_assoc e9e949b mt76x0: phy: remove channel parameter from mt76x0_phy_set_chan_bbp_params 1775717 mt76: move mt76x02_phy_set_bw in mt76x02-lib module f82134f mt76: move mt76x02_phy_set_band in mt76x02-lib module 3eaa34f mt76x0: pci: rename mt76x0_phy_calibrate 7269fb4 mt76x0: pci: introduce mt76x0_phy_calirate routine a514b75 mt76x0: phy: update set_channel for mt76x0e devices 62a1bc5 mt76x0: eeprom: introduce mt76x0_tssi_enabled routine a48481d mt76x0: phy: add phy/vco temperature compensation cc34ce9 mt76: move rssi_gain_thresh routines in mt76x02-lib module eaf9751 mt76: move mt76x02_phy_adjust_vga_gain in mt76/mt76x02_phy.c 2715e7c mt76: introduce mt76x02_init_agc_gain routine 87fcb31 mt76x0: phy: align channel gain logic to mt76x2 one 98f8ef7 mt76x0: phy: do not run calibration during channel switch cf859ad mt76x2: align mt76x2 and mt76x2u firmware 1f3f767 mt76x2u: align channel gain logic to mt76x2 one d1c1454 treewide: Replace more open-coded allocation size multiplications bcbecd2 mt76x0: phy: use proper name convention b6694e6 mt76x0: phy: simplify rf configuration routines da129c9 mt76x0: phy: improve code readability in initvals_phy.h eab7ab1 mt76x0: pci: add get_survey support 9e493f7 mt76: move mt76x02_mac_work routine in mt76x02-lib module ecec6ba mt76: move mt76x02_debugfs in mt76x02-lib module 4f3b608 mt76x0: use shared debugfs implementation 6aae25b mt76x0: use mt76x02_mac_work as stats handler b228a45 mt76x2u: introduce mac workqueue support 4671af4 mt76x0: phy: unify calibration between mt76x0u and mt76x0e 5ed28f3 mt76x0: do not perform MCU calibration for MT7630 9b844da add mt7610e firmware Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools: patch: Add missing CVE-2018-6951 fixRosen Penev2018-10-164-12/+33
| | | | | | | | | | uscan reports a new CVE now that PKG_CPE_ID was added. Reordered patches by date. Signed-off-by: Rosen Penev <rosenp@gmail.com> [re-title commit & refresh patches] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 05:49:00 +0000