aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ipq806x: add support for GL.iNet GL-B1300Dongming Han2018-02-148-2/+341
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for GL.iNet GL-B1300 Specification: - SOC: IPQ4028 / QCA Dakota - RAM: 256 MiB - FLASH: 32 MiB - ETH: Qualcomm Atheros QCA8075 Gigabit Switch (2 x LAN, 1 x WAN) - USB: 1 x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC) - WLAN1: Qualcomm Atheros QCA4028 2.4GHz 802.11bgn 2:2x2 - WLAN2: Qualcomm Atheros QCA4028 5GHz 802.11a/n/ac 2:2x2 - INPUT: one reset and one WPS button - LEDS: 3 leds: Power, WIFI(only for 2.4G currently), and one reserved - UART: 1 x UART on PCB (3.3V, TX, RX, GND) - 115200 8N1 Installation: Method 1: - use serial port to stop uboot - uboot command: run lf Method 2: - push down reset button and power on - wait until three leds constantly on then release - upgrade by uboot web at http://192.168.1.1 Note: - the sysupgrade image need to be renamed to lede-gl-b1300.bin in both method. - the sysupgrade image can be automatically downloaded if tftp server at 192.168.1.2 have that file. - the wifi led will be flashing when writing image. Signed-off-by: Dongming Han <handongming@gl-inet.com>
* ubox: update to latest git HEADJohn Crispin2018-02-142-3/+3
| | | | | | | | | | 128bc35 logread: fix reconnect logd logic 66347ec logread: move the code setting up the request blob out of the main loop 975a258 logread: move output connection setup code out of main loop b81bea7 logread: cleanup pid file handling d73e7d2 ubox: Replace strerror(errno) with %m format. Signed-off-by: John Crispin <john@phrozen.org>
* archs38: add HSDK boardEvgeniy Didin2018-02-143-4/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Synopsys DesignWare HSDK (which stands for ARC HS Development Kit) is the latest and greatest development platform that sports quad-core ARC HS38 in real silicon. Most noticeable features of the board are: * Quad-core ARC HS38 CPU running at 1GHz * 4Gb of DDR * Built-in Vivante GPU (well supported via open source Etnaviv drivers) * Built-in Wi-Fi/Bluetooth module (RedPine RS-9113) And as usual we have: * [micro] SD-card slot * 2 USB 2.0 ports * 1Gbit Ethernet port * Built-in Digilent JTAG probe * Serial port accessible via micro-USB port For more information about HSDK board visit: https://www.synopsys.com/dw/ipdir.php?ds=arc-hs-development-kit Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> CC: Alexey Brodkin <abrodkin@synopsys.com> CC: Hauke Mehrtens <hauke@hauke-m.de> CC: John Crispin <john@phrozen.org>
* archs38: switch to kmod-usb2Evgeniy Didin2018-02-141-1/+1
| | | | | | | | | | | We have managed to get USB 2.0 working good enough on all archs38 platforms so we're ready to switch to much faster USB 2.0. Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> CC: Alexey Brodkin <abrodkin@synopsys.com> CC: Hauke Mehrtens <hauke@hauke-m.de> CC: John Crispin <john@phrozen.org>
* generic: swconfig: reduce lock duration on sysfs filesKevin Darbyshire-Bryant2018-02-141-8/+12
| | | | | | | | sysfs attributes 'port_mask' & 'speed_mask' held locks whilst doing mundane tasks such as sprintf. Refactor code to reduce length of time locks are held unnecessarily. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* generic: swconfig: add mode led attributeKevin Darbyshire-Bryant2018-02-141-12/+125
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
* mwlwifi: downgrade to version 10.3.4.0-20180118Hauke Mehrtens2018-02-132-58/+6
| | | | | | | Some people reported problems with the current development version, so go back to the latests more or less release. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mwlwifi: fix compile problem with kernel 4.14Hauke Mehrtens2018-02-131-0/+92
| | | | | | | vfs_write() is not exported on kernel 4.14 any more and kernel_write() should be used instead. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mwlwifi: use PKG_SOURCE_DATE instead of versionHauke Mehrtens2018-02-131-2/+2
| | | | | | | | | Using PKG_SOURCE_DATE instead of PKG_VERSION will make the build system generate the version based on the date and the git hash. This way the tar file name changes when the git hash changes and this avoids problems when someone forgets to change the version, but changes the git hash. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mwlwifi: Update to latest commit 20180208Chris Breuer2018-02-131-3/+3
| | | | | | | | | | | | | | | | | | | Changes since last merge into OpenWrt since 2017-12-14: - Added debugfs file tx_hist. - Added debugfs file fixed_rate. - Added debugfs file ba_hist. - Modified the way to establish BA stream. - Added code to control BF type. - Added functions to check/dump dhcp packet. - Upgrade 88W8964 firmware to 9.3.2.4. - Added debugfs file coredump. - Corrected the way to transmit multicast packets. - Change driver version to 10.3.4.0-20180118. - Corrected the way to get qos control. - Assigned broadcast dhcpoffer to another queue. - Separated broadcast and multicast packets. Bump to latest commit 20180206 Signed-off-by: Chris Breuer <github@chrisbreuer.de>
* mvebu: Migrate uci config to new PCIe pathHauke Mehrtens2018-02-131-0/+41
| | | | | | | | | | | | | | | | | | | | The name of the PCIe controller node in device tree changed between kernel 4.9 and kernel 4.14. Migrate the configuration when an update from kernel 4.9 to 4.14 or back is done to the new name to make the existing wifi configuration compatible with the new names. This replaces the "pcie-controller" part with "pcie" on all nodes if the file exists in sys fs. This is not done in the uci-defualts, because they are getting executed to late in the boot process. The kernel module gets loaded before the uci-defaults scripts are executed. When the mwlwifi driver gets loaded it will trigger an event via hotplug to detect new devices and as the paths are not in the uci configuration they will be added again. When the migration is done before the script will detect that they are already there. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: Add support for kernel 4.14Hauke Mehrtens2018-02-1329-0/+3893
| | | | | | | | | | Add support for kernel 4.14 to the mvebu target. This also replaces the old sfp and phylink patches with new versions from Russell's clearfog-4.13 branch http://git.arm.linux.org.uk/cgit/linux-arm.git/log/?h=clearfog-4.13 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: move files to files-4.9 and files-4.4 folderHauke Mehrtens2018-02-134-0/+568
| | | | | | | | This is needed to prevent copying it into kernel 4.14. These device tree files are already integrated into kernel 4.14 and we would like to use the upstream versions only. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: move wifi detect hotplug script to laterHauke Mehrtens2018-02-131-2/+2
| | | | | | | | | Make it easily possible to add a custom script in front of this hotplug script which adds new devices. This is needed for the mvebu target in which we want to migrate the old configuration before new devices are getting detected. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: ubifs: create use file system format 4 by defaultHauke Mehrtens2018-02-132-0/+64
| | | | | | | | | | | | | | | | | | | Instead of creating an ubifs file system with format version 5 by default on empty UBI volumes use the older format 4 by default. This will make it possible to mount these file systems also on older kernel versions. When a user wants to do a sysupgrade from kernel 4.14 to kernel 4.9 the old kernel has to read the file system created by the more recent kernel which currently does not work for ubifs. This fixes the problem by creating file systems which are compatible with older kernel versions by default. Kernel 4.14 will still be able to read and write UBI FS file system version 5, it will just not be used when a ubifs partition is created implicitly on an empty UBI volume. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Add missing config optionsHauke Mehrtens2018-02-131-0/+5
| | | | | | These were found when compiling the new octeontx target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* brcm63xx: drop root parameter from cmdlineJonas Gorski2018-02-1388-88/+88
| | | | | | | | | | | The root= parameter overrides the automatic rootfs detection by partition name, so drop it. Fixes boot from flash after renumeration changes of partitions due to parser changes. Fixes FS#1350. Fixes: a27d59bb4274 ("brcm63xx: switch to new partition layout specification") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* target.mk: let profile remove from DEFAULT_PACKAGESPhilip Prindeville2018-02-131-0/+2
| | | | | | | In a profile, specifying -pkg in the list of PACKAGES will suppress it even if it appears in the target's DEFAULT_PACKAGES list. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* ipq806x: switch to full dual-boot for the nbg6817 sysupgrade supportStefan Lippers-Hollmann2018-02-131-3/+23
| | | | | | | | | | | | | | Instead of writing to the currently booted partition set, this implements full dual-boot support for sysupgrade by always writing to the other, currently inactive, partition set and toggling the dualflag after a successful flash. The currently active/ booted partition set is determined by parsing /proc/cmdline for its rootfs parameter (supplied by the DTS), instead of reading from the 0:DUAL_FLAG mtd, in order to prevent (potentially) bricking both partition sets. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* ipq806x: request the first free loop device dynamically for the nbg6817 ↵Stefan Lippers-Hollmann2018-02-131-4/+5
| | | | | | | | | | | | sysupgrade Instead of hardcoding /dev/loop0, it's safer to query for the first free loop device and assign that dynamically. While /dev/loop0 is a reasonable assumption immediately following "losetup --detach-all", detaching the mounted overlay is no longer strictly necessary once dual-boot support has been added for the nbg6817. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* ipq806x: use absolute the device path in $kernel for the nbg6817 sysupgradeStefan Lippers-Hollmann2018-02-131-4/+4
| | | | | | | Harmonize the variable usage for $kernel and $rootfs to always contain the full device path, instead of just its basename. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* ipq806x: support new location of USB PHY kernel moduleLuis Araneda2018-02-131-1/+3
| | | | | | | PHY drivers were grouped into vendor specific directories by upstream commit 0b56e9a7e8358e59b21d8a425e463072bfae523c Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* i2c.mk: sort kernel modulesLucian Cristian2018-02-131-62/+66
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* hwmon.mk: sort kernel modulesLucian Cristian2018-02-131-100/+109
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* can.mk: sort modulesLucian Cristian2018-02-131-95/+96
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* crypto.mk: sort kernel modulesLucian Cristian2018-02-131-347/+359
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* fs.mk: sort kernel modulesLucian Cristian2018-02-131-69/+77
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* firewire.mk: sort kernel modulesLucian Cristian2018-02-131-14/+16
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* build: cleanup leftover qconf filesAlif M. Ahmad2018-02-131-1/+1
| | | | | | | | | | ``make xconfig`` toplevel target will invoke ``make qconf`` inside ./scripts/config directory, which results a ``qconf`` executable. This commit removes leftover ``qconf`` executable during ``make config-clean``. Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
* ar71xx: add more registers to ar71x_regs.hJulien Dusser2018-02-133-11/+388
| | | | | | | | | | Add more registers and flags to ar71x_regs.h for QCA955x and QCA956x SoCs. Values come from Qualcomm Atheros u-boot code. Patches can be merged into 622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch Signed-off-by: Julien Dusser <julien.dusser@free.fr>
* ramips: add support for D-Link DAP-1522 A1George Hopkins2018-02-138-10/+174
| | | | | | | | | | | | | | | | | | D-Link DAP-1522 is a wireless bridge/access point with 4 LAN ports and a dual-band wireless chipset. Specifications: - Ralink RT2880 - 32 MB of RAM - 4 MB of Flash - 4x 10/100/1000 Mbps Ethernet (RTL8366SR) - 802.11abgn (RT2850) Flash Instructions: 1. Download lede-ramips-rt288x-dap-1522-a1-squashfs-factory.bin 2. Open the web interface and upload the image Signed-off-by: George Hopkins <george-hopkins@null.net>
* mtd: add fixwrg commandGeorge Hopkins2018-02-134-3/+233
| | | | | | Add a command to fix WRG headers, based on wrgg.c. Signed-off-by: George Hopkins <george-hopkins@null.net>
* kernel: mtdsplit: split by WRG headerGeorge Hopkins2018-02-131-3/+18
| | | | | | | Support splitting WRG images, which can be found in older D-Link devices. Signed-off-by: George Hopkins <george-hopkins@null.net>
* kernel: add missing symbolJohn Crispin2018-02-132-0/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* uqmi: bump package releaseKoen Vandeputte2018-02-131-1/+1
| | | | | | fixes: da8990e717e1 ("uqmi: use built-in command for data-link verification") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: Add eTactica EG-200 supportKarl Palsson2018-02-1313-1/+140
| | | | | | | | | | | | | | EG-200 is a DIN rail mountable device with one ethernet port, wifi, an RS-485 port, and an internal USB attached uSD card reader. Two leds, "modbus" and "etactica" are managed by userspace applications in factory firmware. Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Karl Palsson <karlp@etactica.com>
* uqmi: use built-in command for data-link verificationKoen Vandeputte2018-02-131-1/+19
| | | | | | | | | | | uqmi contains a command for directly querying the modem if there is a valid data connection, so let's use it. This avoids the cases were all previous tests are succesful, but the actual data link is not up for some reasons, leading to states were we thought the link was up when it actually wasn't .. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* uqmi: use correct value for connection checkingKoen Vandeputte2018-02-131-4/+8
| | | | | | | | | | | | | | Originally, the implementation only checked if uqmi command execution succeeded properly without actually checking it's returned data. This lead to a pass, even when the returned data was indicating an error. Rework the verification to actually check the returned data, which can only be correct if the uqmi command itself also executed correctly. On command execution success, value "pdh_" is a pure numeric value. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* uqmi: use general method for state cleaningKoen Vandeputte2018-02-131-10/+4
| | | | | | | | | | Debugging shows that using the general method properly cleans on each run, while the method specifying the client-ID shows "No effect" even while in connected state. Fixes several connectivity issues seen on specific modems. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: use new image build code for WHR-G300NINAGAKI Hiroshi2018-02-132-42/+21
| | | | | | | | The tftp.bin image for Buffalo WHR-G300N was not built, so I was fixed it after rewriting to new image build code. And the code for factory-EU.bin was broken, so I deleted it. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* mediatek: remove the CPU_SUBTYPEJohn Crispin2018-02-131-1/+0
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* cns3xxx: remove linux 4.9 supportKoen Vandeputte2018-02-1329-1607/+13
| | | | | | | | - Remove kernel 4.9 support - Apply specific 4.14 changes directly to source - Refreshed all Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* target: Remove nomips16 option.Rosen Penev2018-02-131-3/+1
| | | | | | There is no target with a CPU subtype of nomips16. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/mkimage: copy mkenvimage to bin directoryEvgeniy Didin2018-02-131-0/+2
| | | | | | | | | | | | | | For some boards u-boot binary environment file is required, which is generated by mkenvimage utility. But in OpenWrt there is no separate support for mkenvimage, which is a part of u-boot tools. mkenvimage gets built in u-boot/tools as well as mkimage anyways. So lets just copy mkenvimage to the $(STAGING_DIR_HOST)/bin/ directory. Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> CC: Alexey Brodkin <abrodkin@synopsys.com> CC: Hauke Mehrtens <hauke@hauke-m.de> CC: John Crispin <john@phrozen.org>
* kernel: add missing symbol for v4.14John Crispin2018-02-131-0/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* octeontx: add support for OCTEON TX targetTim Harvey2018-02-138-0/+1049
| | | | | | | | | | | The Cavium OCTEON TX is an ARM 64-bit SoC leveraging CPU cores and periperhals from the Cavium ThunderX SoC. This initial support provides a 4.14 kernel and kernel+initramfs that is bootable on the Gateworks Newport GW630x as well as the Cavium sff8104 reference board. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* packages: uboot-mxs: override instead of appending u-boot make flagsMichael Heimpold2018-02-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | This prevents passing down the HOSTCC stuff set in u-boot.mk which results in linking errors against openssl: tools/mxsimage.o: In function `sb_aes_reinit': mxsimage.c:(.text+0x202): undefined reference to `EVP_CIPHER_CTX_reset' tools/mxsimage.o: In function `mxsimage_generate': mxsimage.c:(.text+0x110d): undefined reference to `EVP_MD_CTX_new' mxsimage.c:(.text+0x114f): undefined reference to `EVP_MD_CTX_free' mxsimage.c:(.text+0x11c3): undefined reference to `EVP_MD_CTX_new' mxsimage.c:(.text+0x1323): undefined reference to `EVP_MD_CTX_free' mxsimage.c:(.text+0x134a): undefined reference to `EVP_CIPHER_CTX_reset' tools/mxsimage.o: In function `mxsimage_verify_print_header': mxsimage.c:(.text+0x23ce): undefined reference to `EVP_MD_CTX_new' mxsimage.c:(.text+0x242c): undefined reference to `EVP_MD_CTX_new' mxsimage.c:(.text+0x246b): undefined reference to `EVP_MD_CTX_free' mxsimage.c:(.text+0x24ef): undefined reference to `EVP_CIPHER_CTX_reset' mxsimage.c:(.text+0x2e52): undefined reference to `EVP_MD_CTX_free' collect2: error: ld returned 1 exit status Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* packages: uboot-mxs: bump to 2017.11Michael Heimpold2018-02-132-120/+292
| | | | | | Also update the U-Boot BSP patch for I2SE Duckbill devices. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* mxs: rename files to files-4.9Michael Heimpold2018-02-131-0/+0
| | | | | | | | The Device Tree file for I2SE Duckbill boards was updated upstream. Let's use the upstream version for upcoming kernel 4.14 by keeping our current version for v4.9 still around. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* ramips: Add support for the GnuBee Personal Cloud TwoRosen Penev2018-02-137-0/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GnuBee Personal Cloud Two crowdfunded on https://www.crowdsupply.com It is a low-cost, low-power, network-attached storage device. Specifications: - SoC: MediaTek MT7621AT - RAM: DDR3 512 MB - Flash: 32 MB - Six SATA ports for 3.5" Drives - One SDcard - One USB 3.0 - Two USB 2.0 - Gigabit Ethernet: Three Ports - UART 3.5mm Audio Jack or 3 pin header - 57600 8N1 - Three GPIOs available on a pin header Flash instructions: The GnuBee Personal Cloud Two ships with libreCMC installed. libreCMC is a Free Software Foundation approved fork of LEDE/OpenWrt. As such one can upgrade using the webinterface or sysupgrade. Das U-Boot has multiple options for recovery or updates including : - USB - http - tftp Errata: - While there are three ethernet ports, the third requires support for the second GMAC. This will come in kernel 4.14. - The first hard drive slot has a clearance issue with the two fan headers. Workaround is to pull the headers out and connect the pins to jumper wires. - Using this device as a NAS is problematic with the 4.9 kernel as many /dev/sdX reads throw silent errors. The current theory behind this is some kind of unhandled DMA mapping error in the kernel. This is not an issue with kernel 4.4. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Signed-off-by: Rosen Penev <rosenp@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 22:04:31 +0000