aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* lantiq: Use the correct SPI flash speed for the Netgear DGN3500Daniel Gimpelevich2016-05-271-1/+1
| | | | Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* tools/tplink-safeloader: split CPE210 from CPE510 profileAlexander Couzens2016-05-272-10/+24
| | | | | | | | | The CPE210 was still described for the OEM upgrade as compatible, even the wireless configuration isn't compatible anymore between both series (2ghz and 5ghz). Update the CPE210 image profile to use the new profile. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ar71xx: switch ordering and template to improve readabilityAlexander Couzens2016-05-271-5/+5
| | | | | | | The CPE210's ancestor is the CPE510 not the other way around. The device profile is also named after the CPE510. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ramips: fix Netgear EX2700 imagesJoseph C. Lehner2016-05-271-8/+4
| | | | | | | | The bootloader on this device expects the kernel partition to end on a 64k boundary. The last 64 byte of the kernel partition must contain a valid uImage header (the fakeroot partition). Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
* kernel/mtd: Add support for Macronix mx25u25635f, used in C2600 v1.1Ash Benz2016-05-271-0/+10
| | | | Signed-off-by: Ash Benz <ash.benz@bk.ru>
* kernel/mac80211: skip ath10k OTP check if caldata foundAsh Benz2016-05-271-0/+42
| | | | Signed-off-by: Ash Benz <ash.benz@bk.ru>
* ipq806x/dts: Add Archer C2600 DTSAsh Benz2016-05-271-0/+425
| | | | Signed-off-by: Ash Benz <ash.benz@bk.ru>
* ipq806x/base-files: extract ath10k caldataAsh Benz2016-05-271-0/+68
| | | | Signed-off-by: Ash Benz <ash.benz@bk.ru>
* ipq806x/base-files: Add support for Archer C2600Ash Benz2016-05-272-1/+22
| | | | Signed-off-by: Ash Benz <ash.benz@bk.ru>
* ipq806x/base-files: Add Archer C2600 LEDs and boardAsh Benz2016-05-272-0/+8
| | | | Signed-off-by: Ash Benz <ash.benz@bk.ru>
* ipq806x: Add Archer C2600 to image/MakefileAsh Benz2016-05-271-1/+24
| | | | Signed-off-by: Ash Benz <ash.benz@bk.ru>
* ipq806x: Add support for linux-4.4Ram Chandra Jangir2016-05-27137-24887/+628
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 1)Changes - Rebased the patches for linux-4.4.7 - Added patch to fix spi nor fifo and dma support - Added patch to configure watchdog barktime 2)Testing Tested on IPQ AP148 Board: a. NOR boot and NAND boot b. ethernet network and ath10k wifi c. ubi sysupgrade UnTested dwc3 usb has not been validated on IPQ board(AP148) 3)Known Issues: Once we flash ubi image on AP148, and if we reset the board, uboot on first boot creates PEB and LEB for dynamic sized partitions, which is incorrect and not what linux expects which causes errors when trying to mount rootfs. In order to test this, we can use the below steps: a. Flash the ubi image on board and don't reset the board b. load the kernel fit image in RAM and boot from there. Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
* fw-utils/tplink-safeloader.c: Add support for Archer C2600Ash Benz2016-05-271-3/+111
| | | | Signed-off-by: Ash Benz <ash.benz@bk.ru>
* include/image.mk: move build step tplink-safeloader to image.mkAsh Benz2016-05-272-12/+12
| | | | | | Move tplink-safeloader from target/linux/ar71xx/image/tp-link.mk to include/image.mk Signed-off-by: Ash Benz <ash.benz@bk.ru>
* toolchain: uClibc: Bump to the most recent version 1.0.14Alexey Brodkin2016-05-272-2/+2
| | | | | | This change updates uClibc version to the most recent 1.0.14 release. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* lantiq: do not build images which exceed the flash sizeMathias Kresin2016-05-271-42/+46
| | | | | | | | | | The user benpicco in #openwrt reported that images are build which are bigger that the available flash size. He provided a proof of concept fix and gave permission to me to send it for inclusion. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: VGV7510KW22 - remove NOR SPL leftoversMathias Kresin2016-05-271-6/+2
| | | | | | Missed this one with my last cleanup patch. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7510KW22 - enable the IP101A phyMathias Kresin2016-05-272-5/+23
| | | | | | | | | | | | The RJ45 WAN port is used for xDSL as well as the IP101A. The pins 1,2,3,6 of the RJ45 are connected to the IP101A and the pins 4,5 are connected to the xdsl chip. Drop the ip101a-rst node. It can't be controlled and is not required at all. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7510KW22 - fix pinmux configurationMathias Kresin2016-05-271-25/+1
| | | | | | | | | | | The STP pinmux was initially added in assumption LAN2 led is driven by it. It worked somehow because STP group and gphy0 led0 share the GPIO. Do it the right way by adding the gphy0 led0 the gphy function. According to the author, the SPI node is a copy & paste leftover. Which makes sense since nothing is connected to the SPI bus on this device. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: Add Arcadyan VGV7519 supportMathias Kresin2016-05-272-1/+309
| | | | | | | | | | | | | | | | Based on a submission to the uboot-lantiq repo by Eddi De Pieri. Major cleanup and addition of brnboot second stage u-boot was done by me. The second stage brnboot u-boot is untested, since the brnboot prompt is secured by a still unknown password. But should work. The former ram values are replaced with the ram values extracted from the original brnboot. The old ones didn't worked with the ramboot image. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: vrx200 - lzma compress gphy firmwareMathias Kresin2016-05-272-18/+29
| | | | | | | | | | | | The default bootloader partition of some devices is to small for an u-boot with uncompressed gphy firmware(s). Instead of increasing the bootloader partition size, in compare to the stock firmware, compress the firmware. This would allow the bootloader of at least the FritzBox 3370 as well as the bootloader of the VGV7510KW22 to fit into the bootloader partition of the stock firmware. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: vrx200 - add support for dual nor flashMathias Kresin2016-05-272-12/+30
| | | | | | | | Based on a submission to the uboot-lantiq repo by Eddi De Pieri. Devices like the xrx200 Arcadyan VGV7519 are using two NOR flash chips. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7519 - fix brn partition layoutMathias Kresin2016-05-271-4/+50
| | | | | | | | | Use the brnboot partition layout as it is listed in the OpenWrt wiki article for this board. Configure the brnboot root selector for this device as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7519 - get mac address from board_config partitionMathias Kresin2016-05-271-2/+3
| | | | | | | Use the mac address stored in the board_config partition instead of a static one. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7519 - add vlan supportMathias Kresin2016-05-272-1/+3
| | | | | | Add the lantiq,switch property to enable vlans and setup them up. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7519 - add second usb portMathias Kresin2016-05-271-0/+5
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7519 - cleanup pinmux configurationMathias Kresin2016-05-271-15/+3
| | | | | | | | | | | | Cleanup the pinmux configuration by removing the unused spi node. Nothing is connected to the SPI bus on devices. The stp_out pinmux child node covers the same GPIOs as the already used stp group. The same applies to the gphy-leds_out pinmux node and the "gphy0 led1" as well as "gphy1 led0" groups. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7519 - remove/merge redundant parts in dtsMathias Kresin2016-05-273-68/+21
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix ARV4518PWR01 networkMohammed Berdai2016-05-271-0/+4
| | | | | | | | This patch fixes the missing Lan interface config in the file /etc/config/network for ARV4518PWR01/A which results in eth0 and br-lan being down and therefore no way to access the router unless via UART-TTL. Signed-off-by: Mohammed Berdai <mohammed.berdai@gmail.com>
* mac80211: brcmfmac: return -ENFILE if interface existsRafał Miłecki2016-05-301-1/+1
| | | | | | | This makes brcmfmac compatible with mac80211 which uses dev_alloc_name (and so returns -ENFILE on error). Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mac80211: change default SSID from Lede to LEDERafał Miłecki2016-05-291-1/+1
| | | | | | | | | | LEDE project seems to be using "LEDE" as its acronym everywhere. To keep things consistent adjust default wireless SSID. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Jo-Philipp Wich <jo@mein.io> Acked-by: John Crispin <john@phrozen.org> Acked-by: Alexander Couzens <lynxis@fe80.eu>
* ramips: add backported MT7628 pinmux fixesÁlvaro Fernández Rojas2016-05-294-2/+220
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* download.pl: Rework URLsDaniel Engberg2016-05-281-15/+32
| | | | | | | | Provide HTTPS URL when possible, try to keep 8 mirrors per entry and spread over several locations of the world. Since most active contributors are in US/CA and/or EU prioritize mirrors that are within those regions if possible. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* kernel: fix dependency chain of kmod-igbJo-Philipp Wich2016-05-281-1/+1
| | | | | | | | | | | The igb kmods selects kmod-i2c-algo-bit which in turn is invisible until kmod-i2c-core gets selected, causing kmod-igb to be hidden from menuconfig as well. Let kmod-igb select kmod-i2c-core as well in order to make it visible in menuconfig right away. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* util-linux: fix breakageDirk Neukirchen2016-05-281-7/+25
| | | | | | | | | | | | | | | | | | | | | | | | | - install correct libs to staging/usr/lib fixes eudev, nfs-kernel-server the lib*.a seem broken - use the correct .so files and remove .a libs - some build breakage was observed with parallel builds: text-utils/more-more.o: In function `putstring': more.c:(.text+0x1f4): undefined reference to `tputs' text-utils/more-more.o: In function `initterm': more.c:(.text+0x1b74): undefined reference to `setupterm' more.c:(.text+0x1f0c): undefined reference to `tparm' more.c:(.text+0x20ac): undefined reference to `tigetnum' more.c:(.text+0x20c8): undefined reference to `tigetflag' more.c:(.text+0x20ec): undefined reference to `tigetstr' more.c:(.text+0x2148): undefined reference to `PC' text-utils/more-more.o: In function `reset_tty': more.c:(.text+0x2630): undefined reference to `tputs' - fix line length Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* base-files: rework postinstall uci-defaults handlingJo-Philipp Wich2016-05-271-5/+4
| | | | | | | | | | | | | | | Some package postinstall operations, e.g. those emitted by the LuCI build system, source and delete the uci-defaults themselves upon package insteall, causing the generic defaults apply code to trigger shell errors like: .../luci-app-ddns.postinst: .: line 130: can't open './40_luci-ddns' Rework the generic apply code to check the existence of the uci-defaults script before trying to source it, use sed to prefilter the list of entries from the control file and perform the directory change in a subshell, avoiding the need for cd $OLDPWD. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* util-linux: fix sfdiskDirk Neukirchen2016-05-271-86/+85
| | | | | | | | | | | | | | | | | | reported by reproducible openwrt project[1]: we package some libtool shell script - add missing dependencies - fix paths - make in InstallDev does not seem to be necessary tested (cal,dmesg,sfdisk) on x86 qemu VM with allyesconfig [1]: https://reproducible.debian.net/openwrt/openwrt.html [Jo-Philipp Wich: fix double slash in sfdisk path, reword commit message] Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: add GPIO pin for usb power switch for RouterBOARD 912Cezary Jackiewicz2016-05-271-0/+4
| | | | | | | RB912 has one usb shared between external USB and miniPCIe slot. GPIO52 can reroute power to external USB (=1) or internal miniPCIe slot (=0) Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* mediatek: more mtd fixesJohn Crispin2016-05-251-0/+62
| | | | | | this fixes full builds when ALL_KMODS is selected Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: fix regression in VG3503J.dtsJohn Crispin2016-05-241-0/+2
| | | | | | | | 9d0608eef3e5b9fca - "lantiq: VG3503J - merge profiles" resulted in the dts file missing the version string. Signed-off-by: John Crispin <john@phrozen.org>
* procd: Update to latest headAlexey Brodkin2016-05-241-2/+2
| | | | | | | | This includes a fix for building against uClibc: http://git.openwrt.org/?p=project/procd.git;a=commit;h=9a6f83d3c168523ac7b898ae481c2fd8c501d6a6 Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: John Crispin <john@phrozen.org>
* mediatek: update mtd backportJohn Crispin2016-05-241-626/+423
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* sdk: remove redundant symbol declarationJo-Philipp Wich2016-05-241-7/+0
| | | | | | | | Commit d79f8909c1bde8376c82537798ce363797033cf9 introduced CONFIG_ALL, CONFIG_ALL_KMODS and CONFIG_ALL_NONSHARED as menuconfig choices to the SDK, therefor we can drop the hardcoded CONFIG_ALL symbol declaration now. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* sdk: stop shipping a .configJo-Philipp Wich2016-05-241-1/+0
| | | | | | | | | | | | | | | | Now that the most important options are exposed via menuconfig in the SDK we can stop shipping a (possibly outdated) copy of .config from the emitting buildroot. Leaving out .config has two positive side effects: - A simple "make" run without any prior config will launch menuconfig, forcing interactive users to make appropriate choices - Buildbot systems (e.g. our phase2 builder) can issue a "make defconfig" to obtain a .config enabling all packages by default Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* iproute2: Use URL aliasDaniel Engberg2016-05-241-1/+1
| | | | | | Remove hardcoded URLs and use alias instead. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* iw: Use URL aliasDaniel Engberg2016-05-241-1/+1
| | | | | | Remove hardcoded URL and use alias instead. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* kirkwood: add missing kernel symbolJo-Philipp Wich2016-05-241-0/+1
| | | | | | | The query for ARMADA_THERMAL is stalling the kconfig process and as long as we do not package it, simply disable the symbol. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* jsonfilter: allow empty pathsJo-Philipp Wich2016-05-241-2/+2
| | | | | | | Allow path specifications to refer to just '@' or '$' which is useful for exporting the keys or array indizes of the toplevel object to the shell. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* dropbear: Fix incorrect CONFIG_TARGET_INIT_PATH.Dario Ernst2016-05-241-2/+2
| | | | | | | Fix a „semantic typo“ introduced in b78aae793e20e06defa1e75ab4d30dbb6807c139, where TARGET_INIT_PATH was used instead of CONFIG_TARGET_INIT_PATH. Signed-off-by: Dario Ernst <Dario.Ernst@riverbed.com>
* x86: generalize partition discovery for sysupgradeJo-Philipp Wich2016-05-243-26/+55
| | | | | | | | | | | | | | | Generalize the partition discovery in sysupgrade in order to fix sysupgrade and config backup/recovery on MMC block devices which use a different naming scheme compared to mtdblock or sd* devices. The change also adds the find applet to the ramdisk utilities so that upgrade code can rely on it. The commit is based on the initial submission by Russell Senior at http://patchwork.ozlabs.org/patch/625440/ . Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 17:27:15 +0000