| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
| |
Boards added: WNR1000v2, WNR2000v3, WNR612v2, WNDR3700.
Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
(cherry picked from commit d47b68700644f37084b82845e9557b1e9954f533)
[removed WNR1000v2/WNR2000v3 since not supported in 19.07]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
|
|
|
|
|
|
|
|
|
| |
In ar71xx, the board name for the TL-WR1043ND v3 is equal to v2:
tl-wr1043nd-v2
Fix SUPPORTED_DEVICES for v3 in ath79 accordingly.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit b5791118ccd3039cc9ef6fd3b1c4efcad6ab154f)
|
|
|
|
|
|
|
|
|
|
| |
Fix the error that tl-wdr3320-v2 can't upgrade firmware via web
interface by using magic_ver="0200" for this device.
Signed-off-by: 南浦月 <nanpuyue@gmail.com>
[commit message facelift]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 0ff2385a92c0a31769fce954b7bd571d6114dbc8)
|
|
|
|
|
|
|
|
| |
Boards added: WNR1000v2, WNR2000v3, WNR2200, WNR612v2, WNDR4300.
Boards changed: WNDR3700 (u-boot env size is 2 sectors not 1).
Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
(cherry picked from commit 11052900494ec8216b9b39ba0b24d5e036f4d323)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Refreshed all patches.
Altered patches:
- 301-arch-support-layerscape.patch
Remove upstreamed:
- 950-0311-sc16is7xx-Fix-for-Unexpected-interrupt-8.patch
Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* New upstream microcode datafile 20190918
*Might* contain mitigations for INTEL-SA-00247 (RAMBleed), given
the set of processors being updated.
* Updated Microcodes:
sig 0x000306d4, pf_mask 0xc0, 2019-06-13, rev 0x002e, size 19456
sig 0x000306f4, pf_mask 0x80, 2019-06-17, rev 0x0016, size 18432
sig 0x00040671, pf_mask 0x22, 2019-06-13, rev 0x0021, size 14336
sig 0x000406f1, pf_mask 0xef, 2019-06-18, rev 0xb000038, size 30720
sig 0x00050654, pf_mask 0xb7, 2019-07-31, rev 0x2000064, size 33792
sig 0x00050657, pf_mask 0xbf, 2019-08-12, rev 0x500002b, size 51200
sig 0x00050662, pf_mask 0x10, 2019-06-17, rev 0x001c, size 32768
sig 0x00050663, pf_mask 0x10, 2019-06-17, rev 0x7000019, size 24576
sig 0x00050664, pf_mask 0x10, 2019-06-17, rev 0xf000017, size 24576
sig 0x00050665, pf_mask 0x10, 2019-06-17, rev 0xe00000f, size 19456
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
|
|
|
|
|
|
|
|
|
|
| |
* Implements MDS mitigation (RIDL, Fallout, Zombieload), INTEL-SA-00223
CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091
* Updated Microcodes:
sig 0x000206d6, pf_mask 0x6d, 2019-05-21, rev 0x061f, size 18432
sig 0x000206d7, pf_mask 0x6d, 2019-05-21, rev 0x0718, size 19456
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* New Microcodes:
sig 0x00030678, pf_mask 0x02, 2019-04-22, rev 0x0838, size 52224
sig 0x00030678, pf_mask 0x0c, 2019-04-22, rev 0x0838, size 52224
sig 0x00030679, pf_mask 0x0f, 2019-04-23, rev 0x090c, size 52224
sig 0x000406c3, pf_mask 0x01, 2019-04-23, rev 0x0368, size 69632
sig 0x000406c4, pf_mask 0x01, 2019-04-23, rev 0x0411, size 68608
sig 0x00050657, pf_mask 0xbf, 2019-02-27, rev 0x5000021, size 47104
sig 0x000806e9, pf_mask 0x10, 2018-10-18, rev 0x009e, size 98304
sig 0x000806eb, pf_mask 0xd0, 2018-10-25, rev 0x00a4, size 99328
sig 0x000806ec, pf_mask 0x94, 2019-02-12, rev 0x00b2, size 98304
sig 0x000906ec, pf_mask 0x22, 2018-09-29, rev 0x00a2, size 98304
sig 0x000906ed, pf_mask 0x22, 2019-02-04, rev 0x00b0, size 97280
* Updated Microcodes:
sig 0x000206a7, pf_mask 0x12, 2019-02-17, rev 0x002f, size 12288
sig 0x000306a9, pf_mask 0x12, 2019-02-13, rev 0x0021, size 14336
sig 0x000306c3, pf_mask 0x32, 2019-02-26, rev 0x0027, size 23552
sig 0x000306d4, pf_mask 0xc0, 2019-03-07, rev 0x002d, size 19456
sig 0x000306e4, pf_mask 0xed, 2019-03-14, rev 0x042e, size 16384
sig 0x000306e7, pf_mask 0xed, 2019-03-14, rev 0x0715, size 17408
sig 0x000306f2, pf_mask 0x6f, 2019-03-01, rev 0x0043, size 34816
sig 0x000306f4, pf_mask 0x80, 2019-03-01, rev 0x0014, size 18432
sig 0x00040651, pf_mask 0x72, 2019-02-26, rev 0x0025, size 21504
sig 0x00040661, pf_mask 0x32, 2019-02-26, rev 0x001b, size 25600
sig 0x00040671, pf_mask 0x22, 2019-03-07, rev 0x0020, size 14336
sig 0x000406e3, pf_mask 0xc0, 2019-04-01, rev 0x00cc, size 100352
sig 0x000406f1, pf_mask 0xef, 2019-03-02, rev 0xb000036, size 30720
sig 0x00050654, pf_mask 0xb7, 2019-04-02, rev 0x200005e, size 32768
sig 0x00050662, pf_mask 0x10, 2019-03-23, rev 0x001a, size 32768
sig 0x00050663, pf_mask 0x10, 2019-03-23, rev 0x7000017, size 24576
sig 0x00050664, pf_mask 0x10, 2019-03-23, rev 0xf000015, size 23552
sig 0x00050665, pf_mask 0x10, 2019-03-23, rev 0xe00000d, size 19456
sig 0x000506c9, pf_mask 0x03, 2019-01-15, rev 0x0038, size 17408
sig 0x000506ca, pf_mask 0x03, 2019-03-01, rev 0x0016, size 15360
sig 0x000506e3, pf_mask 0x36, 2019-04-01, rev 0x00cc, size 100352
sig 0x000506f1, pf_mask 0x01, 2019-03-21, rev 0x002e, size 11264
sig 0x000706a1, pf_mask 0x01, 2019-01-02, rev 0x002e, size 73728
sig 0x000806e9, pf_mask 0x10, 2019-04-01, rev 0x00b4, size 98304
sig 0x000806e9, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328
sig 0x000806ea, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328
sig 0x000806eb, pf_mask 0xd0, 2019-03-30, rev 0x00b8, size 98304
sig 0x000806ec, pf_mask 0x94, 2019-03-30, rev 0x00b8, size 97280
sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328
sig 0x000906ea, pf_mask 0x22, 2019-04-01, rev 0x00b4, size 98304
sig 0x000906eb, pf_mask 0x02, 2019-04-01, rev 0x00b4, size 99328
sig 0x000906ec, pf_mask 0x22, 2019-02-14, rev 0x00ae, size 98304
sig 0x000906ed, pf_mask 0x22, 2019-03-17, rev 0x00b8, size 97280
* Implements MDS mitigation (RIDL, Fallout, Zombieload), INTEL-SA-00223
CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
|
|
|
|
|
|
|
|
|
| |
When Nanostation M was renamed from ubnt,nano-m to ubnt,nanostation-m
in commit f1396ac753cc ("ath79: align naming of Ubiquiti Nanostation M"),
the caldata extraction in 10-ath9k-eeprom was overlooked.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 5dc535419fe5f59839686570545fc4180e14d545)
|
|
|
|
|
|
|
| |
77ad0de plugin: avoid truncating numeric values
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit aa89bdcd04676b21cbe3e8a7b8df3545a86d947a)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Many bugs were fixed--2 patches removed here.
This release of wolfSSL includes fixes for 5 security vulnerabilities,
including two CVEs with high/critical base scores:
- potential invalid read with TLS 1.3 PSK, including session tickets
- potential hang with ocspstaping2 (always enabled in openwrt)
- CVE-2019-15651: 1-byte overread when decoding certificate extensions
- CVE-2019-16748: 1-byte overread when checking certificate signatures
- DSA attack to recover DSA private keys
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit f4853f7cca816214cd6e64cffe2b73d0b8c16def)
|
|
|
|
|
|
|
|
|
| |
Hardware acceleration was disabled when AES-CCM was selected as a
workaround for a build failure. This applies a couple of upstream
patches fixing this.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit ab19627ecc3923687fd339f4f23dc45572d00ce0)
|
|
|
|
|
|
|
|
| |
c9b6668 ustream-ssl: skip writing pending data if .eof is true after connect
Fixes: CVE-2019-5101, CVE-2019-5102
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 6f9157e6bdea91507af84acdf53da7c0e6879bc1)
|
|
|
|
|
|
|
|
|
|
|
| |
465f8dc wolfssl: adjust to new API in v4.2.0
3b06c65 Update example certificate & key, fix typo
1c38fd8 wolfssl: enable CN validation
33308ee ustream-io-cyassl.c: fix client-mode connections
79d91aa Remove CyaSSL, WolfSSL < 3.10.4 support
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 57ff06405e09ebce705c01178143c3ce907993b2)
|
|
|
|
|
|
|
|
|
|
|
| |
Instead of depending on kmod-usb2 make it depend on the normal USB
dependencies. This should hopefully fix some problems seen in the build
bot builds for powerpc_8540.
In addition also activate DRIVER_11N_SUPPORT support.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 3ff3b044c01949cd7280978b17d0348ee9e7f4ae)
|
|
|
|
|
|
|
|
|
| |
This patch breaks building on PowerPC, like the mpc85xx_generic
target for me.
Fixes: FS#2585
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit b01305c8d26d8eb3525cf79591075601b04736cc)
|
|
|
|
|
|
|
|
|
|
| |
Forward the OpenWrt TARGET_LDFLAGS to the linker of the fw_printenv tool.
In addition also use the more standard make invocation script.
With this change the fw_printenv tool is built with PIE and Full RELRO
support when activated globally in OpenWrt.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
(cherry picked from commit b7b2be0b268ced260ca8df84be1b0d469aaf6e38)
|
|
|
|
|
|
|
| |
Backported upstream patch.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit 39035df71c37d474be2cb2a0fad8d70da095c68b)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
All buttons on the Netgear R6220 are active-low while they are flagged
as active-high.
The GPIO status reads the following for no buttons pressed:
root@64367-r6220:~# cat /sys/kernel/debug/gpio
gpio-7 ( |wps ) in hi
gpio-8 ( |wifi ) in hi
gpio-14 ( |reset ) in hi
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit f7f9fe5256ebb660d3160452c3c01a9eb080938f)
|
|
|
|
|
|
|
|
|
|
|
| |
This fixes the netdev LED trigger for interfaces, which are renamed
during initialization (e.g. ppp interfaces).
Fixes: FS#2193
Fixes: FS#2239
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit edbadec843a77286d4f690a3641b7bca97f4c998)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When switching from master branch to 19.07 or older, we need to ensure
that Python symlink in staging bin directory points to Python 2.
We can't rely completly just on SetupHostCommand as its executed only in
cases when the $(STAGING_DIR_HOST)/bin/python doesn't already exist, so
we need to remove it before running SetupHostCommand.
This is a cherry-pick of 3b68fb57c938af3948ae4c2da61501183fbef649
with python3 instead of python2
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Here is a way to break your build env without this patch:
1) have python point to python3, and no python2
2) start the build, SetupHostCommand will create a symlink
./staging_dir/host/bin/python -> /usr/bin/python
3) build fails on scons because it can't find any python2
4) install python2 and restart the build
5) the build fails on wireless-regdb compile because python is python3 instead of python
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
|
|
|
|
|
|
|
| |
Fixes CVE-2019-15903
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit b4af2c689fc8736777940b7bbf009bb1672296ec)
|
|
|
|
|
|
|
| |
Fixes CVE-2019-5094
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 700e7a2eb9c515ffe4f3278857e538ea37cc5e56)
|
|
|
|
|
|
|
|
|
|
|
| |
Refresh patches, for changes in version 7.66.0 see https://curl.haxx.se/changes.html#7_66_0
Fixes CVEs:
CVE-2019-5481
CVE-2019-5482
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(cherry picked from commit 71cf4a272c9cf7d6e604e6327d0c94aeceac26e7)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To simplify the upgrade process and ensure easier identification of
device partitioning, the following devices are disabled on ath79
target in openwrt-19.07 branch:
- glinet,gl-ar300m-nor
- glinet,gl-ar300m-nand
- glinet,gl-ar750s
Proper ath79 (NAND) support for the devices is expected to be
introduced based on kernel 4.19 (see GitHub PR #2184).
In openwrt-19.07, ar71xx should be used for those devices.
With this, we ensure that the new ath79 image names (at least for
releases) refer to the updated partitioning.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
|
|
|
|
|
|
|
|
|
|
|
| |
The QCA953x only supports 25 MHz refclk, however some OEMs set an
invalid bootstrap value for the REF_CLK option, which would break the
clock detection in ath9k.
Force the QCA953x refclk to 25MHz in ath9k, as this is (according to the
datasheet) the only valid frequency.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 4c6fe32468bc60cc25a8c298498c0be3c73e7378)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This fixes commit bae927c551fd ("ar71xx: add support for TP-LINK CPE510
V2.0") where the support for this device wasn't optimal.
Device support for the CPE510v2 so far has been a hack to enable
flashing with CPE510v1 images. Those even have different hardware (e.g.
additional ethernet port).
With this patch, we provide proper support for this device in ar71xx.
Installation:
- Flash factory image through stock firmware WEB UI or through TFTP
- To get to TFTP recovery just hold reset button while powering on
for around 4-5 seconds and release.
- Rename factory image to recovery.bin
- Stock TFTP server IP: 192.168.0.100
- Stock device TFTP address: 192.168.0.254
Fixes: bae927c551fd ("ar71xx: add support for TP-LINK CPE510 V2.0")
Signed-off-by: Andrew Cameron <apcameron@softhome.net>
[Rebased onto revert commit, changed comments in mach-cpe510.c,
changed commit title and description, fixed eth0 MAC address,
removed eth1 initialization]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[squashed revert, added fixes tag]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit c79b796280fa5cd64bac663f9d5e5d9a737c30d6)
[added CPE510V2 entry to tplink-safeloader.c]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
|
|
|
|
|
|
|
| |
This will have GIT ignore patches in root directory, as created
when using "git format-patch".
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 2c5413559880c54c5eec980121febfe6c7cd287a)
|
|
|
|
| |
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
|
|
| |
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is a problem with the EA8500, the switch will not work after soft
reboot, the only way to get it working again is to power cycle it
manually.
There are probably several issues in the play, it's quite hard to fix it
without having access to the actual device, so I don't see any other
option now, then revert the offending commit.
Ref: PR#2047
Fixes: FS#2168 ("Switch no longer work after restart on Linksys EA8500")
Reported-by: Adam <424778940z@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 04d6753d03e3a6db07b7a2d3296774d0965bbbfa)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The release notes since last time for wave-1:
* October 5, 2019: Fix too-short msg caused by invalid use of PayloadLen in receive path.
This appears to resolve the issue of getting (and ignoring) too-short commands
when we detect loss of CE interrupts and go into polling mode.
* October 12, 2019: Fix regression in IBSS mode that caused SWBA overrun issues. Related to
regression added during the ct-station logic, specifically TSF allocation.
Thanks for Ahmed Zaki @ Mage-Networks for helping to diagnose and test.
* October 15, 2019: Only send beacon tx completion events if we can detect CT driver is being
used (based on CT_STATS_OK flag being set). This should help CT firmware work
better on stock driver.
The release notes since last time for wave-2:
* October 15, 2019: Only send beacon tx completion events if we can detect CT driver is being
used (based on ATH10k_USE_TXCOMPL_TXRATE2 | ATH10k_USE_TXCOMPL_TXRATE1 flags being set).
This should help CT firmware work better on stock driver.
* October 31, 2019: Compile out peer-ratecode-list-event. ath10k driver ignores the event.
* November 1, 2019: Fix rate-ctrl related crash when nss and other things were changed while
station stays associated. See bug: https://github.com/greearb/ath10k-ct/issues/96
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(cherry picked from commit e716e93a2f7290086f49992c9980773c88100c3a)
|
|
|
|
| |
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Import patches from upstream to sync 19.07 with master:
9f3e3323e996 rt2x00: allow to specify watchdog interval
2034afe4db4a rt2800: add helpers for reading dma done index
759c5b599cf4 rt2800: initial watchdog implementation
09db3b000619 rt2800: add pre_reset_hw callback
710e6cc1595e rt2800: do not nullify initialization vector data
e403fa31ed71 rt2x00: add restart hw
0f47aeeada2a rt2800: do not enable watchdog by default
41a531ffa4c5 rt2x00usb: fix rx queue hang
3b902fa811cf rt2x00usb: remove unnecessary rx flag checks
1dc244064c47 rt2x00: no need to check return value of debugfs_create functions
706f0182b1ad rt2800usb: Add new rt2800usb device PLANEX GW-USMicroN
95844124385e rt2x00: clear IV's on start to fix AP mode regression
567a9b766b47 rt2x00: do not set IEEE80211_TX_STAT_AMPDU_NO_BACK on tx status
14d5e14c8a6c rt2x00: clear up IV's on key removal
13fa451568ab Revert "rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band"
--pending-- rt2800: remove errornous duplicate condition
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
|
|
|
|
|
|
|
|
|
|
| |
With this commit, the WAN LED is triggered by the switch port state
instead of the eth0 netdev.
Otherwise, the LED is always illuminated, regardless of the WAN port
link state.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 70d5989c9c99788a9b2a1a737987edcf7e1ae382)
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This enables PMKSA and opportunistic key caching by default for
WPA2/WPA3-Personal, WPA3-Personal and OWE auth types.
Otherwise, Apple devices won't connect to the WPA3 network.
This should not degrade security, as there's no external authentication
provider.
Tested with OCEDO Koala and iPhone 7 (iOS 13.1).
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 3034f8c3b85e70b1dd9b4cd5cd33e9d2cd8be3b8)
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
|
|
|
| |
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit d26738bc767f48d2dee7097cbfc6d07ffeee58fb)
|
|
|
|
|
|
|
| |
Fixes: 853e4dd3 ("ipqx0xx: add Generic subtarget")
Ref: https://forum.openwrt.org/t/ipq40xx-snapshot-not-updated-since-22nd-august/44126
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit 40e3f660c1c0f400092cce09feb8c13bec97caeb)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Both targets miss a subtarget causing an image naming style which is
different from other all othe targets, even tho it already uses
`x/generic/` as subfolder as if the subtarget would exist.
This commit adds the Generic subtarget resulting in consistent naming.
~/src/openwrt/openwrt/bin/targets/ipq806x/generic$ ls
openwrt-ipq806x-generic-netgear_d7800-initramfs-uImage
openwrt-ipq806x-generic-netgear-d7800.manifest
openwrt-ipq806x-generic-netgear_d7800-squashfs-factory.img
openwrt-ipq806x-generic-netgear_d7800-squashfs-sysupgrade.bin
CC: John Crispin <john@phrozen.org>
Signed-off-by: Paul Spooren <mail@aparcar.org>
(cherry picked from commit 853e4dd3062df7cb5704b15d6af6730e3194b571)
|
|
|
|
|
|
|
|
|
| |
The 2.4 GHz radio had very poor signal reception (-89 dBm for an AP
sitting 5 m away). By enabling the external amplifier, received signal
has improved to -50 dBm for the same AP.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
(cherry picked from commit e667d6f46b5fa9ade5da1d76c8cc1aab1df1dcb6)
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Modify GL-AR300M-Lite and GL-AR300M (NOR):
* Include qca9531_glinet_gl-ar300m.dtsi directly
rather than qca9531_glinet_gl-ar300m-nor.dts
* Remove redundant inclusion of gpio.h and input.h
Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit f5c7fe2ff0deb20f76b4d65195434e35cbb4e08a)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
So far, WiFi MAC addresses for this device have been set up from
caldata. However, this returns values which do not look like MAC
addresses. They also do not match stock firmware:
wlan0 (5.0): 00:11:22:00:17:D0 from 0x8004
wlan1 (2.4): 00:11:22:00:17:CD from 0x4 (and 0x2e)
It looks like the only valid MAC address on this device is at 0x28.
So, this patch changes setup to calculate addresses based on the
value at 0x28:
lan: *:0A (flash, label)
wan: *:0B (flash + 1)
wifi2: *:0A (flash)
wifi5: *:0C (flash + 2)
Thanks to Roger Pueyo Centelles <roger.pueyo@guifi.net> for
investigating this on his devices.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit d1072096f49823eb39357f9555d7854a9c91bcfb)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update libevent to 2.1.11
Use CMake instead GNU Autotools
Backport following commits:
https://github.com/libevent/libevent/commit/f05ba671931e2b4e38459899f6f63f79f99869fe
..and partially
https://github.com/libevent/libevent/commit/7201062f3ef505a77baa6ccaf1cf73812462308a
to fix compilation
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(cherry picked from commit f351beedfd47766e5e44a04af50e3724bec54dbc)
(resolves FS#2435)
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
d442d62 plugin: fix double free in finish callback
ee26d83 main: exec_self: make clang analyzer happy
90e40bd file: exec: properly free memory on error
9ecfada uci: free configs list memory on return
32fba36 exec: always call finish_cb to allow plugin to free up memory
ca3e2d5 plugin: do not free method name separately
02c6e1d exec: properly free memory on rpc_exec() error
cc50263 plugin: exec: properly free memory on parse error
bd0ed25 uci: reset uci_ptr flags when merging set operations
37aa919 plugin: fix leaking invoked method name for exec plugins
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit c2675bb0cef373ff59fcc2dbd77471d244bbc774)
|
|
|
|
|
|
|
|
|
| |
Refreshed all patches.
Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
|
|
|
|
|
|
|
|
|
|
| |
The kconfig symbol is an invisible one since its introduction. It is
not supposed to be enabled on its own.
Resolves FS#1821
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit 4bf9bec361699e1c033460964158531adf15d7ee)
|
|
|
|
|
|
|
|
|
| |
Refreshed all patches.
Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
|
|
|
|
|
|
|
|
| |
Improves rate control responsiveness and performance
Signed-off-by: Felix Fietkau <nbd@nbd.name>
[reworked to apply on 4.19.79 mac80211 + renumbered + refreshed]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The Unifi AC-LR has identical hardware to the Unifi AC-Lite.
The antenna setup is different according to the vendor,
which explains the thicker enclosure.
Therefore, it is helpful to know the exact device variant,
instead of having "Ubiquiti UniFi-AC-LITE/LR".
Signed-off-by: Andreas Ziegler <dev@andreas-ziegler.de>
[fix legacy name in commit message; add old boardname to
SUPPORTED_DEVICES]
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 07c1ddf522dbe6085af664cf03a41f636a70b99c)
Signed-off-by: David Bauer <mail@david-bauer.net>
|