aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ubus: update to the latest version, switch to git.openwrt.org, fixes a lua ↵Felix Fietkau2015-05-251-3/+3
| | | | | | | | binding memory leak Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45750
* mpc85xx: TL-WDR4900: Fix port 6 being shown as up (10MBit/half) in LUCI/swconfigFelix Fietkau2015-05-251-0/+1
| | | | | | | | | | | | | | | | | Currently port 6 is shown as up 10MBit/half in LUCI and swconfig. Reason is that all bits in the port 6 config are zero. This means that also the aneg flag is not set and in this case ar8216_read_port_link hardcodes the link to be up. This is no real problem but a little annoying. To fix this initialize port 6 with the aneg bit enabled. This causes ar8216_read_port_link to evaluate the link status bit which is always zero for port 6 as no PHY is connected to this port. And it doesn't hurt as port 6 isn't connected to anything on TL-WDR4900. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 45749
* netifd: bump to current HEADFelix Fietkau2015-05-251-2/+2
| | | | | | | | | This introduces a new config parameter "no-proto-task" useful for xl2tpd. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 45748
* ramips: fix hang on boot on rt305xJonas Gorski2015-05-251-0/+31
| | | | | | | | | | | Fix an upstream regression on 3.18+ that causes rt305x based devices to hang on boot. Fixes #19715. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45747
* image.mk: make image too big warnings more visibleJonas Gorski2015-05-251-2/+2
| | | | | | | | | Output warnings through stderr to allow them to be easilier spotted when building with V=w. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45746
* gdb: disable liblzma explictlyNicolas Thill2015-05-241-2/+3
| | | | | | | | | * fix build failure when gdb is build after liblzma * bump release number Signed-off-by: Nicolas Thill <nico@openwrt.org> SVN-Revision: 45745
* fuse: fix exec environment for mount and umountNicolas Thill2015-05-243-7/+62
| | | | | | | | | | * add upstream patch (CVE-2015-3202) * refresh patches * bump release number Signed-off-by: Nicolas Thill <nico@openwrt.org> SVN-Revision: 45744
* package/kernel: remove reference to ep93xx targetNicolas Thill2015-05-241-1/+1
| | | | | | Signed-off-by: Nicolas Thill <nico@openwrt.org> SVN-Revision: 45743
* package/kernel: remove reference to 3.12 kernel versionNicolas Thill2015-05-241-1/+0
| | | | | | Signed-off-by: Nicolas Thill <nico@openwrt.org> SVN-Revision: 45742
* comgt: the package contained too many filesJohn Crispin2015-05-231-1/+0
| | | | | | | | fixes #19698 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45741
* fuse: fix build on arm64John Crispin2015-05-231-0/+34
| | | | | | | | | | | | | | | error: ../include/fuse_kernel.h:93:15: error: conflicting types for 'int64_t' ../include/fuse_kernel.h:92:15: error: conflicting types for 'uint64_t' reported by buildbot fix by adopting upstream patch: http://git.baserock.org/cgi-bin/cgit.cgi/delta/fuse.git/commit/include/fuse_kernel.h?id=914871b20a901e3e1e981c92bc42b1c93b7ab81b Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 45740
* w1-gpio-custom: Fix uninitialised variable causing 1-wire to not bind to GPIOJohn Crispin2015-05-231-0/+1
| | | | | | Signed-off-by: Andrew McDonnell <bugs@andrewmcdonnell.net> SVN-Revision: 45739
* scripts/feeds: Delete package/feeds folder in the clean procedure to prevent ↵John Crispin2015-05-231-1/+1
| | | | | | | | | | | | | | | | | dangling links. Hello, if you run: ./scripts/feeds clean It removes ./feeds folder but not ./package/feeds/ which is full of dangling links then. This patch fixes it. Best Regards, Martin Strbačka Signed-off-by: Martin Strbacka <martin.strbacka@nic.cz> SVN-Revision: 45738
* conntrack-tools: add init script for conntrackdJohn Crispin2015-05-232-0/+19
| | | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> SVN-Revision: 45737
* Makefile: remove non-existent STAGING_DIR_TOOLCHAIN from dircleanJohn Crispin2015-05-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Makefile: remove non-existent STAGING_DIR_TOOLCHAIN from dirclean Openwrt's top level Makefile uses STAGING_DIR_TOOLCHAIN in the make dirclean statement. https://dev.openwrt.org/browser/trunk/Makefile#L55 rm -rf $(STAGING_DIR) $(STAGING_DIR_HOST) $(STAGING_DIR_TOOLCHAIN) $(TOOLCHAIN_DIR) $(BUILD_DIR_HOST) $(BUILD_DIR_TOOLCHAIN) As far as I can determine, no such variable has been defined. I made a search in Openwrt source repository and the one line in Makefile's dirclean command is the only place where that variable exists. The item has been introduced to Makefile by r8362, but even at that time neither Makefile nor rules.mk defined such a variable. Most likely the goal has been to set both staging_dir/toolchain and build_dir/toolchain to be cleaned, but one of the variables has been erroneous. The correct variable for build_dir/toolchain has been then added by r13494. References: https://dev.openwrt.org/changeset/8362/ https://dev.openwrt.org/browser/trunk/Makefile?rev=8362 https://dev.openwrt.org/browser/trunk/rules.mk?rev=8362 https://lists.openwrt.org/pipermail/openwrt-devel/2007-August/001159.html https://dev.openwrt.org/changeset/13494 In current code, TOOLCHAIN_DIR = $(TOPDIR)/staging_dir/$(TOOLCHAIN_DIR_NAME) BUILD_DIR_TOOLCHAIN = $(TOPDIR)/build_dir/$(TOOLCHAIN_DIR_NAME) so the item STAGING_DIR_TOOLCHAIN in the rm command is unnecessary. signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 45736
* modules/sound: cleanup by removing unsupported Kernel casesJohn Crispin2015-05-231-10/+0
| | | | | | Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 45735
* modules/usb: another cleanup: remove ancient module namesJohn Crispin2015-05-231-8/+0
| | | | | | | | | modules relating to CONFIG_USB_AUDIO Kernel <2.6.35 is not supported in trunk Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 45734
* modules/usb: cleanup remove old module namesJohn Crispin2015-05-231-10/+0
| | | | | | | | delete cases for Kernel <3.10 (nop-usb-xceiv), <3.12 (phy-nop) Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 45733
* octeon: build squashfs image for UBNT ERLITEJohn Crispin2015-05-231-2/+6
| | | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> SVN-Revision: 45732
* ipq806x: enable cpu idle support in kernel confJohn Crispin2015-05-232-0/+6
| | | | | | Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45731
* ipq806x: add & enable cpufreq supportJohn Crispin2015-05-2333-2/+6531
| | | | | | | | | | | | | | | This change set enables frequency scaling on ipq806x, which speeds-up the CPU and allows it to achieve its max frequency. These patches are cherry-picked & backported from the following location: *130-132: linux-next *133-143: LKML - https://lkml.org/lkml/2015/3/21/15 *144: derived from other qcom similar dts *145: derived from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-3.14/drivers/cpufreq/cpufreq-krait.c Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45730
* ipq806x: add power regulators supportJohn Crispin2015-05-2314-11/+1415
| | | | | | | | | Patches are cherry-picked from linux-next. We're also adding the corresponding config option to the kernel. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45729
* ipq806x: disable i2c device on gsbi4John Crispin2015-05-237-7/+113
| | | | | | | | | | | | | | Patch cherry-picked from the following location: https://chromium-review.googlesource.com/#/c/269931/ Disable the i2c device on gsbi4 and mark gsbi4_h and gsbi4_qup clks as unused. If they are enabled, clock framework will turn them off at end of probe. On ipq806x by design gsbi4_qup, gsbi4_h clks and i2c on gsbi4 are meant for RPM usage. So turning them off in kernel is incorrect. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45728
* ipq806x: refresh kernel patchesJohn Crispin2015-05-236-43/+12
| | | | | | Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45727
* ar71xx: Add support for the Meraki MR12 & MR16John Crispin2015-05-2311-0/+349
| | | | | | | | | | This patch is to add support for the Meraki MR12 and MR16 Access Points. Currently everything is working, minus the 2nd NIC interface on the MR12 which is built into the SoC. Signed-off-by: Chris R Blake <chrisrblake93 at gmail.com> SVN-Revision: 45726
* rampis: add support for status led on ASUS RT-N14UJohn Crispin2015-05-231-1/+1
| | | | | | | | | | The diag.sh script lacked an entry for the status led on the RT-N14U, map it to the asus:blue:power led which is also used by the boot loader to report boot status (eg. TFTP recovery mode VS normal boot) Signed-off-by: Matteo Panella <m.panella@level28.org> SVN-Revision: 45725
* ramips: Adding support for AXIMCom MR-102N 3G/4G Travel Mobile RouterJohn Crispin2015-05-238-1/+144
| | | | | | | | | | MR-102N is a RT3050F based wireless router(32M RAM + 8M NOR flash) with 1 USB and 1 ethernet port. The original product information can be found at: http://www.aximcom.com/en/MR-102N Signed-off-by: Tai-hwa Liang <atliang@gmail.com> SVN-Revision: 45724
* ramips: fix switch names for several boards in device treeJohn Crispin2015-05-233-4/+4
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 45723
* ramips: add support for Comfast CF-WR800NJohn Crispin2015-05-237-0/+133
| | | | | | | | | This patch adds support for Comfast CF-WR800N, a wall-plug wireless router based on the MT7620N SoC with one Ethernet port and a 802.11n 2.4 GHz radio. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 45722
* ubox: various logd cleanupsJohn Crispin2015-05-231-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45721
* uClibc: add signal info for seccomp related SIGSYSJohn Crispin2015-05-231-0/+145
| | | | | | | | | | | | | | uClibc doesn't define signal info for the SIGSYS signal which is issued in case of hitting a syscall prohibited by seccomp. This is sad as it makes debugging seccomp filter policies impossible on some architectures (at least ARM and PowerPC, maybe also others) which do not coincidentally set si_value.sival_int as the syscall number. To fix this, import the definitions and macros needed from glibc. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 45720
* procd: make the jail code also work on armJohn Crispin2015-05-231-4/+4
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45719
* lantiq: Fix initialization of the PCI IRQs when PCIe is also enabledJohn Crispin2015-05-231-18/+19
| | | | | | | | | | There are already ifx_pcie_bios_{map_irq,plat_dev_init} hooks defined in ifxmips_pcie.c. Instead of defining a new hook we simply re-use the existing ones (this is basically what the lantiq BSP code does). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 45718
* lantiq: Fix PCIe bus when PCI is also enabled.John Crispin2015-05-231-10/+10
| | | | | | | | | | | The PCIe bus seems to require a hack/workaround when PCI is enabled as well. Unfortunately this is guarded by an CONFIG_IFX_PCI ifdef, which is only defined in lantiq's BSP code. The config symbol for the upstream lantiq PCI driver is CONFIG_PCI_LANTIQ. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 45717
* bcm53xx: add OHCI (USB 1.1) supportHauke Mehrtens2015-05-231-26/+4
| | | | | | | | | | There is also a OHCI controller, activate it for USB 1.1 support. This should close #19601. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 45716
* arm64: enable new errata backported to 3.18Jonas Gorski2015-05-221-7/+6
| | | | | | | | | 3.18.13 introduced a bunch of new errata, enable them to be on the safe side. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45715
* kernel: add missing generic config symbolJonas Gorski2015-05-221-0/+1
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45714
* tools: gengetopt: Disable doc and tests buildsFlorian Fainelli2015-05-221-0/+13
| | | | | | | | | | Simply disable the build of the "doc" and "tests" directories to speed up the build and avoid the potential for errors coming from external tools being used (e.g: source-highlight installed on a non-standard location). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 45713
* ds-lite: fix resolve retry for fqdn peeraddrsJonas Gorski2015-05-222-6/+7
| | | | | | | | | | | If the first resolveip call will fail, peeraddr will be now empty, and the subsequent resolveip call will try to resolve an empty string. Fix this by storing the result in a temporary variable. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45712
* kernel: update 3.18 to 3.18.14Jonas Gorski2015-05-21194-1460/+625
| | | | | | | | | | | | | | Changelogs: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14 Build tested on brcm63xx and ipq806x, runtested on brcm63xx. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45711
* mac80211: make it work with 3.18.12+Jonas Gorski2015-05-2130-69/+98
| | | | | | | | | | | | | | | 3.18.12 backported 61ada528dea028331e99e8ceaed87c683ad25de2 ("sched/wait: Provide infrastructure to deal with nested blocking") from 3.19, causing the following error on load: [ 13.588000] compat: exports duplicate symbol woken_wake_function (owned by kernel) Fix this by guarding it with a check for 3.18.11 or earlier instead of 3.19. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45710
* brcm63xx: fix failsafe lan and status led for DSL-274xB rev. F1Jonas Gorski2015-05-212-1/+3
| | | | | | | | | Add it to the appropriate places so the power led properly works and ethernet is properly configured for failsafe. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45709
* brcm63xx: Add Huawei HG655b supportJonas Gorski2015-05-219-0/+207
| | | | | | | | | | | | | | | This patch adds support for the Huawei HG655b. Nothing much special in this router, it's just another BCM6368 with a Ralink RT3062 wifi chip and the calibration data embedded in the main flash chip at offset 0x7c0000. There is also configuration data used by the OEM firmware before the cal_data partition, this area is protected by the board_data partition in this patch. Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45708
* odhcpd: fix DHCPv6 downstream PDSteven Barth2015-05-211-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45707
* generic/4.0: fix error during kernel patch applicationSteven Barth2015-05-201-10/+3
| | | | | | | | | | | | | | | | | | | | Commit 5168c9a5702648eb690d32ec821647aca80aeba9 introduced a regression during patch application on the 4.0 kernel. Some of the patched content doesn't match the actual code, therefore leading to the following error: Applying patch generic/667-ipv6-Fixed-source-specific-default-route-handling.patch patching file net/ipv6/ip6_output.c Hunk #1 FAILED at 886. 1 out of 1 hunk FAILED -- rejects in file net/ipv6/ip6_output.c patching file net/ipv6/route.c Hunk #1 succeeded at 2247 (offset 2 lines). Patch generic/667-ipv6-Fixed-source-specific-default-route-handling.patch does not apply (enforce with -f) This change just adapts the actual patch to fix what is in kernel 4.0 and make it apply cleanly. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45705
* mvebu: supress useless in-cpu rtc init on the MambaImre Kaloz2015-05-191-0/+14
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 45704
* tools/mkimage: backport gcc5 compatibility, patchHauke Mehrtens2015-05-191-0/+93
| | | | | | | | | | | | | | | | | | | | | Fedora 22 includes gcc5 by default build leads to error: include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc5.h: No such file or directory backport upstream patch: "Add linux/compiler-gcc5.h to fix builds with gcc5" id: 478b02f1a7043b673565075ea5016376f3293b23 Issue was reported at https://forum.openwrt.org/viewtopic.php?id=56853 & replicated in a VM created, flashed and tested ar71xx image successfully as test Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 45703
* base-files: fix default pre-/postrm for packages with a dotJonas Gorski2015-05-191-2/+2
| | | | | | | | | | | | | Instead of stripping everything after the first dot, strip everything after the last dot. This fixes pre-/postrm actions for packages with a dot in their name, like libusb-1.0. Fixes #19668. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45702
* netifd: improve IPv6 onlink-route handlingSteven Barth2015-05-191-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45701
* ipv6: remove now unneeded source-dest-routing workaroundsSteven Barth2015-05-199-37/+19
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45700
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 01:22:51 +0000