aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* target: sunxi: enable builtin crypto-hw module sun4i-ssYousong Zhou2016-11-241-0/+5
| | | | | | | CONFIG_CRYPTO_DEV_SUN4I_SS was previously set to y but did not take effect because of the absence of CONFIG_CRYPTO_HW=y Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* build: find_md5: ignore non-existent files or directoriesYousong Zhou2016-11-241-1/+1
| | | | | | | Targets like malta can have no patches/ directory available and this commit tries quash "no such file or directory" messages from `find` Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* apm821xx: make it possible to update the dtb partition on the WNDR4700Christian Lamparter2016-11-242-6/+6
| | | | | | | | | | | | | | | | | | | | Currently, the device-tree partition is marked as read-only. Hence, userspace tools like mtd can't write into the partition. This however will be necessary in case the DTB needs to be updated. This patch also adds the kernel.dtb image, so the compiled DTB is exported as a file and available in the binary directory along the firmware images. Note: the u-boot does expects the dtb to be a uimage. To update the dtb manually: 1. copy the generated dtb to the router. 2. mtd erase /dev/mtd2 3. mtd write wndr4700.dtb /dev/mtd2 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* target: sunxi: enable kvm supportYousong Zhou2016-11-241-16/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | Unlike x86, kvm for arm has to be built into the kernel. The kernel config was prepared with the following command make kernel_menuconfig CONFIG_TARGET=platform Then enable ARM_LPAE, VIRTUALIZATION, KVM in that order Other config changes are done by the build system. The following text tries to explain some of them, for archive purposes probably... - BUILD_BIN2C. It was dropped probably because the prompt is empty and no other config option selects it. bin2c is a host executable for converting binary content to a piece of c code for inclusion - CRYPTO_DEV_SUN4I_SS. It was dropped because the dependency CRYPTO_HW was not enabled. Setting that aside, packaging it as a loadbable module in lieu of other sunxi specific modules seems more appropriate - PGTABLE_LEVELS. It was changed from 2 to 3 because 3 is the default when ARM_LPAE is enabled - HAVE_KERNEL_GZIP, etc.. These are enabled in generic config - SCHED_INFO, ZLIB_INFLATE. These were dropped probably for the same reason as for BUILD_BIN2C Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* package: add kernel packages for kvm virtualizationYousong Zhou2016-11-241-0/+105
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* toolchain: gcc: disable ifunc on *-musl by defaultYousong Zhou2016-11-242-0/+76
| | | | | | | | Otherwise the built binaries may fail with Error relocating /usr/bin/qemu-system-x86_64: unsupported relocation type 37 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* build: scan.mk: remove not used variable SCAN_STAMPYousong Zhou2016-11-241-2/+2
| | | | | | | It was left behind since rewrite of metadata scanning done with commit bdc9419 in July 2007 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* uml: clean up the kernel config and add squashfs+ext4/f2fs supportFelix Fietkau2016-11-245-20/+23
| | | | | | Replaces plain ext4 images Signed-off-by: Felix Fietkau <nbd@nbd.name>
* package/utils/fuse: update to 2.9.7Paul Wassi2016-11-245-74/+5
| | | | | | | | Update fuse+libfuse to upstream 2.9.7. Drop the patch for CVE-2015-3202, which is already integrated in the newer version. Rework the other patches. Also switch PKG_SOURCE from @SF to libfuse's github releases. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* mvebu: simplify etc/board.d/02_networkPaul Wassi2016-11-241-5/+1
| | | | | | | Unify switch configuration on Linksys WRTxx00AC series. LAN = eth0, WAN = eth1 Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* mvebu: use image metadata for firmware validationFelix Fietkau2016-11-242-22/+6
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: write protect vgv7519 u-boot and u-boot-env partitionsEddi De Pieri2016-11-231-0/+2
| | | | Signed-off-by: Eddi De Pieri <eddi@depieri.net>
* uboot-envtools: make it not sharedEddi De Pieri2016-11-231-0/+2
| | | | | | | | | | | | uboot-envtools have some stuff related to the cpu. This should fix following error on lantiq soc: Downloading http://downloads.lede-project.org/snapshots/packages/mips_24kc/base/uboot-envtools_2015.10-1_mips_24kc.ipk. Configuring uboot-envtools. //usr/lib/opkg/info/uboot-envtools.postinst: .: line 10: can't open '/lib/ar71xx.sh' Signed-off-by: Eddi De Pieri <eddi@depieri.net>
* uboot-lantiq: vgv7519 fix tftp loading of big kernel/image sizeEddi De Pieri2016-11-231-1/+3
| | | | | | | | | | | | | | | | | | On my board: Bytes transferred = 7084442 (6c199a hex) Image Name: MIPS OpenWrt Linux-3.10.49 Created: 2014-11-11 17:40:00 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 7084378 Bytes = 6.8 MiB Load Address: 80002000 Entry Point: 80002000 Verifying Checksum ... OK Uncompressing Kernel Image ... LZMA: uncompress or overwrite error 7 - must RESET b ROM VER: 1.0.5 CFG 01 Signed-off-by: Eddi De Pieri <eddi@depieri.net>
* ramips: Add device DLINK DWR-512-BGiuseppe Lippolis2016-11-235-0/+142
| | | | | | | | | | | | | | | | | | | | | | The Dlink DWR-512-B modem is a ralink 5350 processor based embedding a 3G mini-pcie router. The oem JBOOT bootloader has to be replaced by a RT5350 SDK U-Boot such as https://github.com/stevenylai/ralink_sdk - U-Boot configured for the RT5350 256MiB SDR. Main reason to change the bootloader is the encrypted header used to store the kernel image. In this way an image can only be generated using the propietary binboy tool (included in the GPL distribution from Dlink). The binboy tool doesn't allow to modify the kernel/rootfs partition scheme. This is considered a big constraint (limited kernel size and inefficient usage of flash space). For interested people I pubblished the details of my investigation about the encrypted firmware header here: http://lists.infradead.org/pipermail/lede-dev/2016-October/003435.html Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
* ramips: do not append metadata to CY-SWR1100 factory imageMathias Kresin2016-11-231-1/+1
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: cleanup dts files of mt7621 based boardsMathias Kresin2016-11-2320-184/+130
| | | | | | | | | | | | | | | | | | | | Fix a typo in mt7621.dtsi compatible string. Disable spi, sdhci and pci in mt7621.dtsi and enable the nodes in the indiviual board dts files. The nodes require further device specific configuration anyway. Remove the m25p80@0 spi child node from mt7621.dtsi and add the chunked-io parameter to the individual board dts files. Fix the spi flash compatible string for the WNDR3700V5. Drop the mt7621-eval-board compatible string for all boards which are not the eval board. Drop the linux,modalias parameter from spi flash node. Remove the xhci node from board files, it is already enabled in dtsi. Disable xhci for boards not having usb ports populated. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: order mt7621.mk alphabeticalMathias Kresin2016-11-231-94/+94
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath10k-ct-firmware: Update to latest firmwares.Ben Greear2016-11-221-6/+6
| | | | | | | | | | | | The 10.1 includes a good many stability fixes related to the effort of backporting upstream 10.2 firmware. Also enables 802.1q vlan support. Successfully tested on apu2. The 10.4 firmwares including new backported code as well as stability fixes. 10.4 has been tested on Fedora x86-64 platforms, but not on LEDE specifically since I had issues compiling LEDE for my 9980/9984 AP hardware. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct: Update to latest.Ben Greear2016-11-221-2/+2
| | | | | | Fixes locking issue, quietens some potential message floods. Signed-off-by: Ben Greear <greearb@candelatech.com>
* netifd: update to the latest versionFelix Fietkau2016-11-221-3/+3
| | | | | | Fixes config reload on bridge MAC address changes Signed-off-by: Felix Fietkau <nbd@nbd.name>
* brcm63xx: Livebox 1: add userspace board supportDaniel Gonzalez Cabanelas2016-11-213-0/+12
| | | | | | | | | | Fix configuration files for the Livebox 1 routers. - Add status led - Set eth0 as the LAN port, for coherence with RedBoot and comfortability. - Add led triggers Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: Livebox 1: relocate the kernel to fix bootDaniel Gonzalez Cabanelas2016-11-212-2/+2
| | | | | | | | Fix Image generation for the Livebox 1 - missing "relocate-kernel", wrong "LOADADDR", fix it Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: Livebox 1: fix part probe nameDaniel Gonzalez Cabanelas2016-11-211-1/+1
| | | | | | | | Fix the DTS file for the Livebox 1 routers: - part probe wrong, it should be RedBoot (uppercase matters) Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: Livebox 1: fix led namingDaniel Gonzalez Cabanelas2016-11-211-5/+5
| | | | | | | | Fix the DTS file for the Livebox 1 routers: - leds are totally wrong, fix them. Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: Livebox 1: use button 1 as failsafe buttonDaniel Gonzalez Cabanelas2016-11-211-3/+3
| | | | | | | | Fix the DTS file for the Livebox 1 routers: - no failsafe button, use button 1 for this purpose Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* base-files: ignore failure of stopping services on removalJonas Gorski2016-11-211-1/+1
| | | | | | | | | Packages that do a killall <cmd> with the same name as the init script will fail the prerm step when the service isn't running. Do make them removable without having to restart the service, ignore the return code. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Jo-Philipp Wich <jo@mein.io>
* opkg: run prerm scripts for the old version also on upgradeJonas Gorski2016-11-212-1/+74
| | | | | | | | | To make sure we properly restart services on upgrade we need to call the prerm script of the old package, in case the init script changes (or vanishes). Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Jo-Philipp Wich <jo@mein.io>
* base-files: don't modify enabled state of service on upgradeJonas Gorski2016-11-212-11/+13
| | | | | | | | Properly stop/start services on upgrade, but don't change the enabled state. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Jo-Philipp Wich <jo@mein.io>
* opkg: set PKG_UPGRADE also when running scripts for the old packageJonas Gorski2016-11-215-15/+16
| | | | | | | | Allow scripts from the package to be upgraded to be aware of being upgraded. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Jo-Philipp Wich <jo@mein.io>
* Revert "grub2: add PKG_FIXUP:=autoreconf"John Crispin2016-11-211-1/+0
| | | | | | | | this caused build errors on x86 This reverts commit a0ea22ac430f91ab045431a79b2e2161e66cd56a. Signed-off-by: John Crispin <john@phrozen.org>
* ramips: fix wrong check for MT7621ATAndrew Yong2016-11-211-1/+1
| | | | | | | fix in sdhci Use ralink_soc == MT762X_SOC_MT7621AT instead of CONFIG_SOC_MT7621 which is wrong and breaks builds on mt7620a-similar platforms (MT7621, MT7688) Signed-off-by: Andrew Yong <me@ndoo.sg>
* lantiq: add missing metadata for tp-link imagesFelix Fietkau2016-11-211-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts/getver.sh: treat all commits as local if can't find upstreamRafał Miłecki2016-11-211-1/+1
| | | | | | | | | | | | | | | If something goes wrong and script can't find upstream revision it will return something like: r2220 which looks like a valid upstream revision 2220. We cant' distinguish it from e.g. 2200 upstream commits and 20 local ones. The new format still provides revision number but also points clearly that is may be not the upstream one: r0+2220 Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: John Crispin < john@phrozen.org>
* grub2: add PKG_FIXUP:=autoreconfAlexandru Ardelean2016-11-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The host-side build of grub2 requires this sometimes. This will re-generate the ./configure script from configure.ac. I don't know the conditions of how this reproduces, it just sometimes appears, and sometimes doesn't. Build error ``` <lede-dir>/build_dir/target-x86_64_musl-1.1.15_yogi/host/grub-2.02~beta2/build-aux/missing: line 81: aclocal-1.14: command not found WARNING: 'aclocal-1.14' is missing on your system. You should only need it if you modified 'acinclude.m4' or 'configure.ac' or m4 files included by 'configure.ac'. The 'aclocal' program is part of the GNU Automake package: <http://www.gnu.org/software/automake> It also requires GNU Autoconf, GNU m4 and Perl in order to run: <http://www.gnu.org/software/autoconf> <http://www.gnu.org/software/m4/> <http://www.perl.org/> Makefile:3962: recipe for target 'aclocal.m4' failed ``` Adding PKG_FIXUP adds sanity (i.e. autoreconf is used for host & target builds) over just using HOST_FIXUP. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* ramips: Fix sdhci kernel panics on MT7621Andrew Yong2016-11-211-2/+2
| | | | | | | | | | | | | | Enable work-arounds present in the code commented-out but needed to write to sdcard on mt7621 which currently causes kernel to oops when engaging in serious writing to sdcard. With this change applied, there are still occasional warnings thrown by the mmc driver, however, at least it no longer crashes the system and even large writes (full-card dump/erase/write/compare) don't show any corruption. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Rebase to LEDE and added "CONFIG_SOC_MT7621" check to ensure non-MT7621 devices do not face performance regressions. Signed-off-by: Andrew Yong <me@ndoo.sg>
* odhcpd: update to latest git HEADJohn Crispin2016-11-211-2/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* odhcpd: update to latest git HEADJohn Crispin2016-11-211-4/+4
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mvebu: Add BQL patch for mvneta driver.Toke Høiland-Jørgensen2016-11-211-0/+83
| | | | | | | | This adds the patch submitted to upstream that adds BQL to the mvneta driver: https://patchwork.kernel.org/patch/9328413/. Helps latency under load when the physical link is saturated. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
* firmware-utils: Add support for the Cisco Meraki MX60/MX60WChris Blake2016-11-211-11/+58
| | | | | | | | | | | | | | This patch adds header support for the Cisco Meraki MX60/MX60W, which are a part of the apm821xx target. Some structure changes were needed due to the fact this device uses U-Boot (unlike other devices in mkmerakifw.c) which uses a different header structure to define the load offsets for the image. A thanks to Christian for helping implement this properly. Cc: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* lantiq: use dwc2 by default on danubeBen Mulvihill2016-11-211-13/+13
| | | | | | Use dwc2 by default on all danube boards. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
* lantiq: dwc2 parameters for danubeBen Mulvihill2016-11-211-2/+31
| | | | | | | | | | Parameters for dwc2 on lantiq. A separate dwc2_core_params structure is defined for danube because danube fifo sizes are large enough to be autodetected. This is not the case on arx and vrx. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
* lantiq: device tree bindings for dwc2 on danubeBen Mulvihill2016-11-211-1/+2
| | | | | | | | | Device tree binding for dwc2 usb driver on danube. Leave old ifxhcd-danube driver as an alternative. Also adds dr_mode = "host" to eliminate warning on boot. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
* lantiq: initialise dwc2 on danubeBen Mulvihill2016-11-211-0/+10
| | | | | | Initialise dwc2 usb driver on danube boards as well as ar9 and vr9. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
* apm821xx: Add support for the Cisco Meraki MX60/MX60WChris Blake2016-11-2111-16/+283
| | | | | | | | | | | | | | | | | | | This patch adds support for the Cisco Meraki MX60/MX60W Security Appliance. Flashing information can be found at https://github.com/riptidewave93/LEDE-MX60 Specs are as follows: AppliedMicro APM82181 SoC at 800MHz 1GiB NAND - Samsung K9K8G08U0D 512MB DDR RAM - 4x Nanya NT5TU128M8GE-AC Atheros AR8327-BL1A Gigabit Ethernet Switch 1x USB 2.0 Port More info can be found at https://wiki.openwrt.org/toh/meraki/mx60 Cc: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* ramips: add support for WeVO W2914NS v2perillamint2016-11-218-0/+168
| | | | Signed-off-by: Yong-hyu Ban <perillamint@gentoo.moe>
* openvpn: update to 2.3.13Magnus Kroken2016-11-211-2/+2
| | | | | | Changelog: https://community.openvpn.net/openvpn/wiki/ChangesInOpenvpn23#OpenVPN2.3.13 Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* ar71xx: Fix switch config on Mikrotik RB450/GJoão Chaínho2016-11-211-2/+6
| | | | | | | This patch fixes the ethernet switch initial config for Mikrotik RB450 and RB450G. The previous version wrongly changed the RouterStation Pro config. This one creates a specific config for the RB450G and leaves the RouterStation Pro unchanged. Signed-off-by: João Chaínho <joaochainho@gmail.com>
* uboot-envtools: add 'dockstar' for kirkwoodPaul Wassi2016-11-211-0/+1
| | | | | | Add board 'dockstar' to known fw_env-configurations. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* uboot-envtools: add support for YunCore CPE830Piotr Dymacz2016-11-211-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 22:05:38 +0000