aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* mt7620: disable image generation for Netgear EX2700Petr Štetiar2019-07-201-1/+1
| | | | | | | | | Image generation is currently failing on builbots due to the following error: WARNING: Image file [...] mt7620-ex2700-squashfs-factory.bin is too big Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86: add modern network modules to Generic targetAlberto Bursi2019-07-201-1/+2
| | | | | | | | | | | | | | | | Many Atom-based embedded/industrial x86 boards can't run 64bit operating systems due to either processor or board firmware limitations, but they have modern interfaces (PCIe) or have modern Intel gigabit controllers onboard. With the current default package selection for x86 Generic target their network won't work. Add the modern gigabit network modules needed or most likely going to be used as add-in cards, similar to what is the list on x86_64 target. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it> [fixed whitespace issue] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit bb27cde2579b0273c464e5ccd3dda7d14e84fd23)
* ath25: disable image generation for ubnt2 and ubnt5 devicesPetr Štetiar2019-07-201-2/+2
| | | | | | | | | | | | | | | | Image generations is currently failing on builbots due to the following errors: mkfwimage -B XS2 -v XS2 [...] ath25-ubnt2-squashfs-sysupgrade.bin ERROR: Failed creating firmware layout description - error code: -2 mkfwimage -B XS5 -v XS5 [...] ath25-ubnt5-squashfs-sysupgrade.bin ERROR: Failed creating firmware layout description - error code: -2 That cryptic -2 error simply means, that kernel+rootfs doesn't fit into the firmware partition. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* gpio-button-hotplug: unify polled and interrupt codeDavid Bauer2019-07-191-65/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch unifies the polled and interrupt-driven gpio_keys code paths as well implements consistent handling of the debounce interval set for the GPIO buttons and switches. Hotplug events will only be fired if 1. The input changes its state and remains stable for the duration of the debounce interval (default is 5 ms). 2. In the initial stable (no state-change for duration of the debounce interval) state once the driver module gets loaded. Switch type inputs will always report their stable state. Unpressed buttons will not trigger an event for the initial stable state. Whereas pressed buttons will trigger an event. This is consistent with upstream's gpio-key driver that uses the input subsystem (and dont use autorepeat). Prior to this patch, this was handled inconsistently for interrupt-based an polled gpio-keys. Hence this patch unifies the shared logic into the gpio_keys_handle_button() function and modify both implementations to handle the initial state properly. The changes described in 2. ) . can have an impact on the failsafe trigger. Up until now, the script checked for button state changes. On the down side, this allowed to trigger the failsafe by releasing a held button at the right time. On the plus side, the button's polarity setting didn't matter. Now, the failsafe will only engage when a button was pressed at the right moment (same as before), but now it can theoretically also trigger when the button was pressed the whole time the kernel booted and well into the fast-blinking preinit phase. However, the chances that this can happen are really small. This is because the gpio-button module is usually up and ready even before the preinit state is entered. So, the initial pressed button event gets lost and most devices behave as before. Bisectors: If this patch causes a device to permanently go into failsafe or experience weird behavior due to inputs, please check the following: - the GPIO polarity setting for the button - the software-debounce value Run-tested for 'gpio-keys' and 'gpio-keys-polled' on - devolo WiFi pro 1200e - devolo WiFi pro 1750c - devolo WiFi pro 1750x - Netgear WNDR4700 - Meraki MR24 - RT-AC58U Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [further cleanups, simplification and unification] (cherry picked from commit 27f3f493de0610c74de2ea406641b256bfcc13a9)
* gpio-button-hotplug: fix 4.19 build breakage on malta/be64Petr Štetiar2019-07-191-0/+1
| | | | | | | | | | | | | | While testing 4.19 build on malta/be64, I've encountered following error: gpio-button-hotplug/gpio-button-hotplug.c:529:18: error: implicit declaration of function 'gpio_to_desc' which is caused by the missing include fixed by this patch. Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit dd6d82112a10796dd5aa0f9e9c76ec8e77e7e211)
* ath79: Use -v1 suffix for TP-Link WDR3600/4300Adrian Schmutzler2019-07-175-14/+14
| | | | | | | | | | | | | | | In ath79, identifiers tplink_tl-wdr3600 and tplink_tl-wdr4300 have been used while most other TP-Link devices include the revision. Although there actually is only one major revision of these devices, they bear the revision on their bottom (v1.x). TP-Link also refers to the devices as V1 on its web page. This patch thus adds -v1 to both so it is more consistent with other devices and with what you would expect from reading the on-device sticker and the support pages. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* openvpn: fix handling of list optionsMatt Merhar2019-07-172-3/+4
| | | | | | | | | | | | | | | This addresses an issue where the list option specified in /etc/config/openvpn i.e. 'tls_cipher' would instead show up in the generated openvpn-<name>.conf as 'ncp-ciphers'. For context, 'ncp_ciphers' appears after 'tls_cipher' in OPENVPN_LIST from openvpn.options. Also, the ordering of the options in the UCI config file is now preserved when generating the OpenVPN config. The two currently supported list options deal with cipher preferences. Signed-off-by: Matt Merhar <mattmerhar@protonmail.com> (cherry picked from commit 1d4c4cbd20580dd211431ab58460a6eebd5e021e)
* ath79: ar9330: add missing watchdog nodePetr Štetiar2019-07-171-0/+10
| | | | | | | | | It was reported in FS#2385, that Carambola2 doesn't currently have working watchdog so fix it by adding watchdog node. Ref: FS#2385 Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 0893f28e19afbd9d4081f59df10631d6ef02e0d7)
* iptables: update to 1.8.3Deng Qingfang2019-07-178-170/+28
| | | | | | | | | | | | | | | | | | | | | | Update iptables to 1.8.3 ChangeLog: https://netfilter.org/projects/iptables/files/changes-iptables-1.8.3.txt Removed upstream patches: - 001-extensions_format-security_fixes_in_libip.patch - 002-include_fix_build_with_kernel_headers_before_4_2.patch - 003-ebtables-vlan-fix_userspace_kernel_headers_collision.patch Altered patches: - 200-configurable_builtin.patch - 600-shared-libext.patch No notable size changes Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [lipibtc ABI_VERSION fix] (cherry picked from commit 299f6cb2da0a443484339aaa51b3d9edcc21ce4e)
* libroxml: bump to the 3.0.2 versionRafał Miłecki2019-07-161-3/+3
| | | | | | | | * Fix for memory leak regression * Support for (un)escaping Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 430d65c544551f9af88cdc6f0b9c6c12364b28f9)
* fstools: add direct dependencies on libblobmsg-json and libjson-cPetr Štetiar2019-07-151-2/+2
| | | | | | | | | | | | | | | | | The OpenWrt buildroot ABI version rebuild tracker does not handle transient dependencies, therefore add all libraries linked by block-mount and blockd as direct dependencies to the corresponding binary package definition. This ensures that block-mount and blockd is automatically rebuilt and relinked if any of these libraries has its ABI_VERSION updated in the future. Fixes: FS#2373 [jow: similar fix for procd and 98.42% of commit message] Signed-off-by: Jo-Philip Wich <jow@mein.io> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit cbae306815bdfc335eeedc35dc5df3d2d4021a2a)
* busybox: strip off ALTERNATIVES specYousong Zhou2019-07-121-19/+3
| | | | | | | | Now that busybox is a known alternatives provider by opkg, we remove the ALTERNATIVES spec and add a note to make the implicit situation clear Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> (cherry-picked from commit 62be427067ee3883b68bcfb08dfc0c43dce22fa3)
* opkg: bump to version 2019-06-14Yousong Zhou2019-07-121-3/+3
| | | | | | | | | Opkg starting from this version special-cases busybox as alternatives provider. There should be no need to add entries to ALTERNATIVES of busybox package Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> (cherry-picked from commit e51b513f75d28306a744637b0fbe7fdd6e3fb813)
* ar71xx: fix nand init issues on some rb2011 devicesKoen Vandeputte2019-07-121-1/+5
| | | | | | | | | | | | | | | | | | | | While flashing lots of RB2011 devices, I noticed that some of them refused to boot properly, failing over the NAND parameters. Checking in detail shows that some device seem to use another NAND flash which only support standard 2048-byte pages, without 512-byte subpage support. This commit disables usage of these small subpage completely. Advantages: - Both NAND's with(out) subpage support are working now - The nand speed increases a bit (measured roughly 1%) in typical usecases Disadvantages: - The maximum storage capacity decreases by ~0.2% as small changes can consume a full page (2048 bytes) now. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: delete leftovers from unused kernel versionsKoen Vandeputte2019-07-121-4/+0
| | | | | | | | Commit 000d400baa0a ("kernel: drop everything not on kernel version 4.14") dropped everything not related to kernel 4.14, but forgot to remove the parts in kernel-version. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.133Koen Vandeputte2019-07-122-7/+7
| | | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2019-3900 Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mac80211: Do not build b43legacy on BRCM47xx mips74 subtargetHauke Mehrtens2019-07-121-1/+1
| | | | | | | | | | | | | | b43legacy needs ssb support and we do not compile the mips74 subtarget of the brcm47xx target with SSB support. This causes a build failure in the mac80211 package and only some of the kernel modules are being created. I am not aware of any device with a BRCM47xx mips74 CPU which uses a b43legacy compatible device. Fixes: FS#2334 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit e05310b9b80f944c718374b449b6fe48d06d412d)
* kernel: cherry pick patch removing __linux__ checkFredrik Olofsson2019-07-101-0/+47
| | | | | | | | | | | This is already included in newer upstream. Needed to build BPF programs using the MIPS kernel include files. Without this patch, clang fails with "#error Use a Linux compiler or give up." in sgidefs.h when building BPF programs. Signed-off-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com> (cherry-picked from commit 7d96c301d6afc9f360c26b404e435e8e03c1e207)
* base-files: Fix path check in get_mac_binaryAdrian Schmutzler2019-07-091-1/+1
| | | | | | | | | | Logic was inverted when changing from string check to file check. Fix it. Fixes: 8592602d0a88 ("base-files: Really check path in get_mac_binary") Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 6ed3349308b24a6bac753643970a1f9f56ff6070)
* kernel: bump 4.14 to 4.14.132Koen Vandeputte2019-07-095-9/+9
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* wolfssl: Fix package hashHauke Mehrtens2019-07-081-1/+1
| | | | | Fixes: 3167a57f7262 ("wolfssl: update to 3.15.7, fix Makefile") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* netsupport: move out mqprio from kmod-schedKonstantin Demin2019-07-081-1/+1
| | | | | | | | | | | | | Currently, there's unable to install "kmod-sched-mqprio" after "kmod-sched" (or vice versa), because "sch_mqprio.ko" is shipped in both packages. Fixes: f83522fa6361 ("linux: Add kmod-sched-mqprio") Fixes: 6af639e0bf78 ("linux: Add kmod-sched-act-vlan") Fixes: 72c7e2dc467c ("linux: Add kmod-sched-flower") Signed-off-by: Konstantin Demin <rockdrilla@gmail.com> [Add cls_flower and act_vlan] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* wolfssl: update to 3.15.7, fix MakefileEneas U de Queiroz2019-07-084-13/+13
| | | | | | | | | | This includes a fix for a medium-level potential cache attack with a variant of Bleichenbacher’s attack. Patches were refreshed. Increased FP_MAX_BITS to allow 4096-bit RSA keys. Fixed poly1305 build option, and some Makefile updates. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit 2792daab5ad26e916619052fc7f581cddc1ea53c)
* base-files: Really check path in get_mac_binaryAdrian Schmutzler2019-07-051-1/+1
| | | | | | | | Currently, path argument is only checked for being not empty. This changes behavior to actually check whether path exists. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mpc85xx: Use gzip compressed kernel on HiveAP-330Pawel Dembicki2019-07-051-1/+1
| | | | | | | | | | | | | | | | | | | After commit 1e41de2f48 ("mpc85xx: convert TL-WDR4900 v1 to simpleImage") XZ compression of zImage was enabled. This change exposed a problem with the HiveAP-330 images, which was fixed by foregoing the compression on the kernel altogether with commit 98089bb8ba8 ("mpc85xx: Use uncompressed kernel on the HiveAP-330"). This patch adds back the gzip compression of the kernel image by utilizing the generic OpenWRT uImage method instead of relying on the PowerPC bootwrapper script that did it previously. Compile-tested: p1020/hiveap-330 Tested-by: Chris Blake <chrisrblake93@gmail.com> [run-tested] Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [filled in even more text]
* lantiq: enable STP where referencedMathias Kresin2019-07-032-0/+2
| | | | | | | | | | | While moving common used parts to dtsi files, the was disabled by default but not enabled for all boards using the STP. Fixes: f519fea4c6db ("lantiq: kernel 4.14: cleanup dts files") Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Mathias Kresin <dev@kresin.me> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* ar71xx: fix ath79/rb4xx IRQ initialization on kernel 4.14W. Michael Petullo2019-07-031-1/+1
| | | | | | | | | | | | | Apply the same approach as in commit 3b53d6fdbc24 ("ar71xx: fix pci irq init on kernel 4.14") to fix IRQ initialization for ath79-based chipsets on rb4xx. Ref: PR#2182 Acked-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: W. Michael Petullo <mike@flyn.org> [commit ref fix] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 8c7d6c47a7893db689e50e1917479ad07a96547a)
* fstools: block-mount: fix restart of fstab serviceKarel Kočí2019-06-282-1/+5
| | | | | | | | | | | | | | | | Restarting service causes file-systems to be unmounted without being mounted back. When this service was obsoleted it should have been implemented in a way that all actions are ignored. Up to this commit default handler was called when restart was requested. This default handler just simply calls stop and start. That means that stop called unmount but start just printed that this service is obsoleted. This instead implements restart that just prints same message like start does. It just calls start in reality. This makes restart unavailable for call. Signed-off-by: Karel Kočí <karel.koci@nic.cz> (cherry picked from commit 3ead9e7b743b1fbd3b07f5a72a16999abbec9347)
* mvebu: Fix platform.sh for non-generic espressobin versionsBrett Mastbergen2019-06-281-2/+4
| | | | | | | | | When the non-generic espressobin targets were added these board checks were not updated. One side effect of this is that config is not saved during an upgrade of -emmc,-v7, or -v7-emmc devices. Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com> (cherry picked from commit 95c1dc5e8678a1fd87234a4d77c8c6643703023c)
* mvebu: fix regression for non-generic ESPRESSObin versionsVladimir Vid2019-06-283-2/+9
| | | | | | | | | | | | | | When targets for multiple ESPRESSObin devices were added, not all files were updated which means any ESPRESSObin version beside generic won't have proper networking, sysupgrade and uboot-env. This patch fixes the issue. * fixup network detection * fixup uboot-env * fixup platform.sh for sysupgrade Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> (cherry picked from commit bc47285cb3c0125424e628521f905f1f0d7b4cef)
* mvebu: image: fix generic-arm64.bootscript mmc selectionVladimir Vid2019-06-281-2/+8
| | | | | | | | | | | Not all versions of ESPRESSObin require SD card, but can be booted from the internal emmc flash (mmc dev 1) instead. Add a simple check in the bootscript to see which mmc device is detected and boot from it using mmcdev variable. Tested-by: Tomasz Maciej Nowak <tomek_n@o2.pl> Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> (cherry picked from commit 008b41b9b0ddd4c5c877a769a85d27eb9c4e21a4)
* base-files: use OPENWRT prefix for os-release variablesBjørn Mork2019-06-271-8/+8
| | | | | | | | | | | Just stumbled across this LEDE legacy, without finding any real reason to keep it. There is a single LEDE_DEVICE_MANUFACTURER_URL dependency in the luci feed repo which needs to be syncronized. Signed-off-by: Bjørn Mork <bjorn@mork.no> [re-added missing commit message] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 8a34a54b6aa6e9a5e2983d554fd5b97bec97e891)
* ramips: mt7621: add IRQ for GPIO nodeChuanhong Guo2019-06-271-0/+3
| | | | | | | This makes interrupt-based gpio-keys working. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> (cherry picked from commit 110daa16e44bb53941a18396ab6a7d9fdd1fa362)
* uqmi: bump to latest git HEADKoen Vandeputte2019-06-271-4/+4
| | | | | | | | 1965c7139374 uqmi: add explicit check for message type when expecting a response 01944dd7089b uqmi_add_command: fixed command argument assignment Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit 47986dc6ea1d643cd348501da09cd2e3ee2f9ee1)
* kernel: bump 4.14 to 4.14.131Koen Vandeputte2019-06-271-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* layerscape: drop pause frame support for aquantia phyYangbo Lu2019-06-261-52/+10
| | | | | | | | | | | | An aquantia phy patch which dropped pause frame support was missing when integrated LSDK-19.03 kernel patches into OpenWrt. Without this patch, LS1043A 10G port would not work. So apply it. Patch link https://source.codeaurora.org/external/qoriq/qoriq-components/ linux/commit/?h=linux-4.14&id=66346b115818365cfaf99d292871b19f0a1d2850 Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* kernel: bump 4.14 to 4.14.130Koen Vandeputte2019-06-258-12/+12
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* apm821xx: fix bogus key-presses on bootChristian Lamparter2019-06-245-0/+37
| | | | | | | | | | | | | | | | | | | | | | | "There are often transient line events when the system is powered up and initialized and it is often necessary for the gpio_chip driver to clear any interrupt flags in hardware before setting up the gpio chip, especially the irqchip portions of it." <http://lists.infradead.org/pipermail/openwrt-devel/2019-June/017630.html> This patch adds a fix for the APM821XX's interrupt controller to clear any bogus pending toggled interrupts that happens on various APM821XX boards on boot. The patch also changes the debouce-interval from the default 5ms debounce interval to 60ms all around. The default setting caused on occasions that the button state became stuck in a pressed state, even though the button was released. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mpc85xx: Use uncompressed kernel on the HiveAP-330Chris Blake2019-06-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems that newer builds of OpenWRT have a gzip kernel larger than 2MB~, which for some reason fails to boot on this board. However, we have 8MB of kernel space and currently the uncompressed kernel is 6.5MB~, so we have some space to grow until a better solution is worked out. Before: ## Booting kernel from Legacy Image at ee840000 ... Image Name: Linux-4.19.53 Created: 2019-06-22 11:17:48 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 2315724 Bytes = 2.2 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 02000000 ... Image Name: OpenWrt fake ramdisk Created: 2019-06-22 11:17:48 UTC Image Type: PowerPC Linux RAMDisk Image (uncompressed) Data Size: 0 Bytes = 0 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at ec000000 Booting using the fdt blob at 0xec000000 Uncompressing Kernel Image ... Error: Bad gzipped data GUNZIP: uncompress, out-of-mem or overwrite error - must RESET board to recover Loading Ramdisk to 10000000, end 10000000 ... OK Loading Device Tree to 00ffa000, end 00fffc78 ... OK ft_fixup_l2cache: FDT_ERR_NOTFOUND After: ## Booting kernel from Legacy Image at ee840000 ... Image Name: POWERPC OpenWrt Linux-4.19.53 Created: 2019-06-22 11:17:48 UTC Image Type: PowerPC Linux Kernel Image (uncompressed) Data Size: 6724584 Bytes = 6.4 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 02000000 ... Image Name: OpenWrt fake ramdisk Created: 2019-06-22 11:17:48 UTC Image Type: PowerPC Linux RAMDisk Image (uncompressed) Data Size: 0 Bytes = 0 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at ec000000 Booting using the fdt blob at 0xec000000 Loading Kernel Image ... OK OK Loading Ramdisk to 10000000, end 10000000 ... OK Loading Device Tree to 00ffa000, end 00fffc78 ... OK Signed-off-by: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [75 cpl limit]
* ipq40xx: Linksys: sysupgrade: Ensure OEM volumes are removedJeff Kletsky2019-06-241-20/+22
| | | | | | | | | | | | | | | | | | When OEM volumes are present in the [alt_]firmware partition, sysupgrade will write a new kernel, but will fail to write the root file system. The next boot will hang indefinitely Waiting for root device /dev/ubiblock0_0... Modified ipq40xx/base-files/lib/upgrade/linksys.sh to remove both `squashfs` and `ubifs` if found on the target firmware partition's UBI device. Run-tested-on: Linksys EA8300 Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [applied some shellcheck suggestions as well]
* kernel: bump 4.14 to 4.14.129Koen Vandeputte2019-06-248-28/+10
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mac80211: update WDS/4addr fix to the version accepted upstreamStefan Lippers-Hollmann2019-06-221-31/+27
| | | | | | | | | | | | | This updates "{nl,mac}80211: allow 4addr AP operation on crypto controlled devices" to the version (v3), which was accepted into upstream mac80211.git and which is tagged for -stable backporting (v4.18+). https://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git/commit/?id=33d915d9e8ce811d8958915ccd18d71a66c7c495 Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [format-patch]
* iproute2: update ctinfo supportKevin Darbyshire-Bryant2019-06-201-10/+5
| | | | | | | | | Follow upstream changes - header file changes only no functional or executable changes, hence no package bump required Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit a8f0c02f80fa0c7c55702770b3ca99f6db5405e7)
* kernel: update act_ctinfoKevin Darbyshire-Bryant2019-06-201-10/+28
| | | | | | | | Follow upstream changes - header file changes no executable difference at all Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 5273fb6b21b953428e2f9ea5892872db5aaf22c1)
* ath79: Add SUPPORTED_DEVICES for Archer C7 v1/v2Adrian Schmutzler2019-06-201-0/+2
| | | | | | | | The identifier for both devices is "archer-c7" on ar71xx, set here: https://github.com/openwrt/openwrt/blob/master/target/linux/ar71xx/base-files/lib/ar71xx.sh#L348 https://github.com/openwrt/openwrt/blob/master/target/linux/ar71xx/base-files/lib/ar71xx.sh#L511 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: fix uci led oneshot/timer triggerRobinson Wu2019-06-201-0/+1
| | | | | | | | | | | | | | This patch adds a missing type property which prevented the creation of oneshot and timer led triggers when they are specified in the /etc/board.d/01_leds files. i.e.: ucidef_set_led_timer "system" "system" "zhuotk:green:system" "1000" "1000" Fixes: b06a286a4861 ("base-files: cleanup led functions in uci-defaults.sh") Signed-off-by: Robinson Wu <wurobinson@qq.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 4.14 to 4.14.128Koen Vandeputte2019-06-2011-24/+24
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: base-files: fix board detect on new MikroTik devicesHenryk Heisig2019-06-191-147/+165
| | | | | | | | | | | | | | | | | | | | Move all MikroTik devices to new function to increase script execution speed. Machine name in new version of MikroTik RouterBOARD devices add "RB" before model name: Old machine name: MikroTik RouterBOARD 951Ui-2nD New: MikroTik RouterBOARD RB951Ui-2nD So this patch should fix it for all currently supported MikroTik boards. Tested-by: Cezary Jackiewicz <cezary@eko.one.pl> [wAP R-2nD] Signed-off-by: Henryk Heisig <hyniu@o2.pl> [rebased,commit message facelift,script fixes] Signed-off-by: Petr Štetiar <ynezz@true.cz> [spotted missing 922UAGS-5HPacD] Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.127Koen Vandeputte2019-06-189-13/+13
| | | | | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2019-11479 - CVE-2019-11478 - CVE-2019-11477 Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.126Koen Vandeputte2019-06-185-11/+122
| | | | | | | | | | | | | | | | | | Refreshed all patches. Altered patches: - 816-pcie-support-layerscape.patch This patch also restores the initial implementation of the ath79 perfcount IRQ issue. (78ee6b1a40b5) It was wrongfully backported upstream initially and got reverted now. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-05 20:59:01 +0000