aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ath79: fix port order for dir 825-c1 and 835-a1Sebastian Kemper2019-01-221-11/+11
| | | | | | | | | | LAN ports 1 and 4 and 2 and 3 are interchanged. Fix this in 02_network so the ports show up in the correct order in luci. The correct ucidef_add_switch line is already present. This commit moves the blocks around to keep alphabetical order. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
* ar71xx: ag71xx: preserve port mirror flags during swconfig applyMilan Krstic2019-01-221-0/+4
| | | | | | | | | | The swconfig load operation always triggers 'apply' function which in this driver currently clears port mirroring flags effectively undoing port mirroring configuration. This fix preserves port mirroring flags during apply. Signed-off-by: Milan Krstic <milan.krstic@gmail.com>
* ath79: ag71xx: preserve port mirror flags during swconfig applyMilan Krstic2019-01-221-0/+4
| | | | | | | | The swconfig load operation always triggers 'apply' function which in this driver currently clears port mirroring flags effectively undoing port mirroring configuration. Signed-off-by: Milan Krstic <milan.krstic@gmail.com>
* procd: Add wrapper for uci_validate_section()Jeffery To2019-01-225-29/+39
| | | | | | | | | | | | | | | | | This adds a wrapper (uci_load_validate) for uci_validate_section() that allows callers (through a callback function) to access the values set by uci_validate_section(), without having to manually declare a (potentially long) list of local variables. The callback function receives two arguments when called, the config section name and the return value of uci_validate_section(). If no callback function is given, then the wrapper exits with the value returned by uci_validate_section(). This also updates several init scripts to use the new wrapper function. Signed-off-by: Jeffery To <jeffery.to@gmail.com>
* iputils: install ping, ping6, traceroute6 with setuid rootCarsten Wolff2019-01-221-3/+3
| | | | | | | | | these utilities need to run with uid 0 to be useful. Thus, install them setuid root like other distros do, too. Signed-off-by: Carsten Wolff <carsten@wolffcarsten.de> [use INSTALL_SUID macro] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* fstools: media change detection (eg:sdcard) using kernel pollingMatthias Badaire2019-01-222-1/+10
| | | | | | | | | | | | | | | | | | | Linux kernel has a polling mechanism that can be activated by changing the parameter /sys/module/block/parameters/events_dfl_poll_msecs which is deactivated by default or the /sys/block/[device]/events_poll_msecs for one device. This patch set the events_poll_msecs when a disk is inserted. Once the media disk change event is sent by the kernel then we force a re-read of the devices using /sbin/block info. With this patch, insertion and ejection of sd card will automatically generate partition devices in /dev. Signed-off-by: Matthias Badaire <mbadaire@gmail.com> [rewrap commit message, fix bashisms, fix non-matching condition, bump pkg release] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ncurses: package only versioned shared objectsJo-Philipp Wich2019-01-221-4/+8
| | | | | | | Also fix the libxxxw.so* -> libxxx.so* linking to actually work, the prevsious code failed to properly symlink the versioned .so files. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* readline: Update to 8.0 and various fixesDaniel Engberg2019-01-223-32/+30
| | | | | | | | | | | | | | | | Update (lib)readline to 8.0 Remove autoreconf Remove blankspace at the end of the lines in description Remove --enable-shared and --enable-static as they're enabled by default Remove TARGET_CPPFLAGS Simplify install sections Install readline.pc (pkgconfig) Add patch for linking (lib)ncurses Source: https://git.buildroot.net/buildroot/plain/package/readline/0000-curses-link.patch Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* libnetfilter-conntrack: update to 1.0.7Peter Wagner2019-01-221-3/+3
| | | | | | Signed-off-by: Peter Wagner <tripolar@gmx.at> [split from https://github.com/openwrt/openwrt/pull/1274] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* conntrack-tools: relocated to packages feedJo-Philipp Wich2019-01-222-97/+0
| | | | | | | In order to prepare the switch from librpc to libtirpc, we need to relocate conntrack-tools to the packages feed. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* scripts: ipkg-remove: handle existing .ipk files without SourceName fieldJo-Philipp Wich2019-01-211-0/+5
| | | | | | | | | | | | Package archives built before commit e6bcf1e4ac ("build: add ABI_VERSION to binary package names") lack the SourceName control file field which caused ipkg-remove to skip such archives. Add fallback code that matches the files by their basename followed by an underscore, similar to how the old cleanup code worked. Fixes: #2067 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: bump 4.14 to 4.14.94Koen Vandeputte2019-01-211-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.151Koen Vandeputte2019-01-211-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: ar7 Compile-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* bcm53xx: add support for Phicomm K3Hao Dong2019-01-204-0/+241
| | | | | | | | | | | | | | | | | | | | | | | Hardware specifications: - CPU: Broadcom BCM4709C0 @1.4GHz (Dual-Core ARM) - RAM: 512 MB (DDR3) - Flash: 128 MB (NAND) - LAN ports: 3, LAN speed: 10/100/1000 - WAN ports: 1, WAN speed: 10/100/1000 - 2.4G: BCM4366 4x4 MIMO 1000Mbps -- Skyworks SE2623L 2.4GHz Power Amplifier (x4) - 5G: BCM4366 4x4 MIMO 2167Mbps -- RFMD RFPA5542 5GHz Power Amplifier Module (x4) - USB: 1x USB 3.0 port - 1x LED, 1x reset button, 1x power switch - 1x system status touch screen Flash: - Enter CFE - Upload the trx file - Reboot Signed-off-by: Hao Dong <halbertdong@gmail.com>
* mt76: update to the latest versionFelix Fietkau2019-01-201-3/+3
| | | | | | | | | | | | | | | d273ddd mt7603: fix number of frames limit in .release_buffered_frames 63bf183 mt76: add channel switch announcement support e45db12 mt7603: fix tx status info 9d11596 mt7603: discard bogus tx status data 4bcb2f9 mt7603: fix txd q_idx field value 4206db7 mt76: set IEEE80211_HW_NEEDS_UNIQUE_STA_ADDR flag c4e4982 mt7603: set IEEE80211_HW_TX_STATUS_NO_AMPDU_LEN 702f557 mt7603: use maximum tx count for buffered multicast packets 158529d mt7603: fix PSE reset retry sequence fc31457 mt7603: implement support for SMPS Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add support for indicating missing tx A-MPDU lengthFelix Fietkau2019-01-201-0/+121
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* nghttp2: bump to 1.36.0Hans Dedecker2019-01-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | e7e8ee5f Update bash_completion b3b4e335 Update manual pages bd93d90a Don't treat text as option if it matches -[0-9] ea69c84b Bump up version number to 1.36.0 783b649b Update AUTHORS eb21e6f8 Merge branch 'update-http-parser' ab2aa567 Fix test failure ff87a542 Use http-parser 0d0a24e19eb5ba232d2ea8859aba2a7cc6c42bc4 439dbce6 Merge branch 'nghttpx-h1-connection-pool-per-addr' e9c9838c nghttpx: Pool h1 backend connection per address 803d4ba9 Merge branch 'nghttpx-randomize-roundrobin-order' 732245e5 make clang-format 9e8d5433 Use clang-format-7 fdcdb21c nghttpx: Randomize backend address round robin order per thread 11d0533c nghttpx: Ensure that cert serial does not exceed 20 bytes dbb5f00d Merge pull request #1287 from rckclmbr/fix_serial_size 9cc412e2 Merge pull request #1285 from staticinvocation/master 5b2efc0a Fix getting long serial numbers for openssl < 1.1 7e4c48a4 Disable shared library if ENABLE_SHARED_LIB is OFF 082e162f Merge pull request #1282 from alagoutte/travis 7cc7c06c .travis(.yml): no longer need llvm-toolchain-trusty-7 12ebeb30 .travis(.yml): Update to Xenial c78abbe1 Update mruby to 2.0.0 124c7848 nghttpx: Add missing return ce9667c4 Merge branch 'nghttpx-fix-trailing-slash-handling' f3f40840 nghttpx: Fix broken trailing slash handling 302abf1b h2load: Fix compile error with gcc 089a03be h2load: Write log file with write(2) de4fe728 Merge branch 'pyos-master' d1b3a83f h2load: add an option to write per-request logs eb679253 Merge branch 'puscas-port_in_use' 6800d317 added access to the number of the current server port c98362ea Bump up version number to 1.36.0-DEV Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* kernel: N_BADCLASS: fix macro to actually work - class e supportKevin Darbyshire-Bryant2019-01-193-3/+3
| | | | | | | | | | | | | | | | | | | Backport upstream patch: Commit 65cab850f0ee ("net: Allow class-e address assignment via ifconfig ioctl") modified the IN_BADCLASS macro a bit, but unfortunatly one too many '(' characters were added to the line, making any code that used it, not build properly. Also, the macro now compares an unsigned with a signed value, which isn't ok, so fix that up by making both types match properly. Reported-by: Christopher Ferris <cferris@google.com> Fixes: 65cab850f0ee ("net: Allow class-e address assignment via ifconfig ioctl") Cc: Dave Taht <dave.taht@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* build: add ABI_VERSION to binary package namesJo-Philipp Wich2019-01-195-10/+35
| | | | | | | | | | | | | | | | | | | | | | Add the ABI_VERSION source makefile variable to the binary package basename and resolve source dependencies on packages with ABI_VERSION set to such expanded names. If for example a package specifies DEPENDS:=libopenssl while the OpenSSL Makefile specifies ABI_VERSION:=1.0.0, the resulting ipk control data dependency will be "Depends: libopenssl1.0.0" and the libopenssl ipk file will be called "libopenssl1.0.0_<version>_<arch>.ipk". The next time a library such as OpenSSL is updated to an incompatible version, the ABI_VERSION shall be changed accordingly to prevent opkg from simply upgrading to an incompatible library without considering the dependencies of already installed packages. Also introduce another "SourceName" control field which is required by the newly introduced "scritps/ipkg-remove" to determine the proper related .ipk files to delete upon buildroot package clean operations. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: expose ABI version in .packageauxvarsJo-Philipp Wich2019-01-193-1/+12
| | | | | | | Subdequent commits need this information to resolve the ABI version when computing binary ipk dependencies. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: rename .packagesubdirs to .packageauxvarsJo-Philipp Wich2019-01-193-6/+6
| | | | | | | | Subsequent commits will put more auxiliary information into this file, such as the per-package ABI version, so rename the metadata script subcommand and file names accordingly. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* packages: set more explicit ABI_VERSION valuesJo-Philipp Wich2019-01-199-13/+13
| | | | | | | | | | | | | | | | | | | | | | In the case of upstream libraries, set the ABI_VERSION variable to the soname value of the first version version after the last backwards incompatible change. For custom OpenWrt libraries, set the ABI_VERSION to the date of the last Git commit doing backwards incompatible changes to the source, such as changing function singatures or dropping exported symbols. The soname values have been determined by either checking https://abi-laboratory.pro/index.php?view=tracker or - in the case of OpenWrt libraries - by carefully reviewing the changes made to header files thorough the corresponding Git history. In the future, the ABI_VERSION values must be bumped whenever the library is updated to an incpompatible version but not with every package update, in order to reduce the dependency churn in the binary package repository. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* opkg: update to latest Git headJo-Philipp Wich2019-01-191-4/+4
| | | | | | | | | | | | | This update fixes some cosmetical issues and a number of segmentation faults when parsing lists having Conflicts or Replaces tags. d217daf libopkg: fix replacelist parsing and writing 9dd9a07 libopkg: fix segmentation fault when traversing conflicts 34571ba libopkg: consider provided packages in pkg_vec_mark_if_matches() 18740e6 opkg_download: print error when fork() fails e3d7330 libopkg: don't print unresolved dependencies twice Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: fix firmware splitter for edimax based boardsMathias Kresin2019-01-194-4/+4
| | | | | | Use the correct splitter for board with the edimax header. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: add DT binding support to the Edimax uImage parserMathias Kresin2019-01-191-0/+10
| | | | | | It allows specifying those parsers directly in the DT. Signed-off-by: Mathias Kresin <dev@kresin.me>
* dnsmasq: allow building without tftp server supportRosy Song2019-01-171-2/+7
| | | | | | It saves 2871 bytes on package size while 4 bytes on memory size. Signed-off-by: Rosy Song <rosysong@rosinson.com>
* kernel: remove upstreamed patch from 4.19Stijn Tintel2019-01-171-89/+0
| | | | | | | | | | This patch applies cleanly, so it doesn't cause errors while rebasing patches. It results in redifinition of inode_still_linked, causing build to fail when ubifs is enabled. Drop the patch. Fixes: a37098a2d013 ("kernel: bump 4.19 to 4.19.16") Reported-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn> Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: drop old symbol from 4.19Stijn Tintel2019-01-171-1/+0
| | | | | | CONFIG_LIRC_STAGING was removed in kernel 4.16. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: bump 4.19 to 4.19.16Stijn Tintel2019-01-1741-476/+129
| | | | | | | | | | | | | | | | | Refresh patches. Remove upstreamed patches: - backport/096-mips-math-emu-Write-protect-delay-slot-emulation-pages.patch - backport/096-v4.20-netfilter-ipv6-Preserve-link-scope-traffic-original-.patch - backport/424-v4.20-net-dsa-fix-88e6060-roaming.patch - hack/100-mtd-rawnand-qcom-fix-memory-corruption-that-causes-p.patch - pending/510-f2fs-fix-sanity_check_raw_super-on-big-endian-machines.patch Update patch that no longer applies: - backport/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch Compile-tested: mesongx Runtime-tested: mesongx Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* odhcpd: fix onlink IA check (FS#2060)Hans Dedecker2019-01-161-3/+3
| | | | | | | 0a36768 dhcpv6-ia: fix compiler warning 1893905 dhcpv6-ia: fix onlink IA check (FS#2060) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dnsmasq: backport latest pre2.81 patchesKevin Darbyshire-Bryant2019-01-1632-41/+4118
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | f52bb5b fix previous commit 18eac67 Fix entries in /etc/hosts disabling static leases. f8c77ed Fix removal of DHCP_CLIENT_MAC options from DHCPv6 relay replies. 4bf62f6 Tidy cache_blockdata_free() 9c0d445 Fix e7bfd556c079c8b5e7425aed44abc35925b24043 to actually work. 2896e24 Check for not(DS or DNSKEY) in is_outdated_cname_pointer() a90f09d Fix crash freeing negative SRV cache entries. 5b99eae Cache SRV records. 2daca52 Fix typo in ra-param man page section. 2c59473 File logic bug in cache-marshalling code. Introduced a couple of commits back. cc921df Remove nested struct/union in cache records and all_addr. ab194ed Futher address union tidying. 65a01b7 Tidy address-union handling: move class into explicit argument. bde4647 Tidy all_addr union, merge log and rcode fields. e7bfd55 Alter DHCP address selection after DECLINE in consec-addr mode. Avoid offering the same address after a recieving a DECLINE message to stop an infinite protocol loop. This has long been done in default address allocation mode: this adds similar behaviour when allocaing addresses consecutively. The most relevant fix for openwrt is 18eac67 (& my own local f52bb5b which fixes a missing bracket silly) To quote the patch: It is possible for a config entry to have one address family specified by a dhcp-host directive and the other added from /etc/hosts. This is especially common on OpenWrt because it uses odhcpd for DHCPv6 and IPv6 leases are imported into dnsmasq via a hosts file. To handle this case there need to be separate *_HOSTS flags for IPv4 and IPv6. Otherwise when the hosts file is reloaded it will clear the CONFIG_ADDR(6) flag which was set by the dhcp-host directive. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: bump 4.9 to 4.9.150Koen Vandeputte2019-01-1617-166/+43
| | | | | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 096-mips-math-emu-Write-protect-delay-slot-emulation-pages.patch Altered patches: - 024-7-net-reorganize-struct-sock-for-better-data-locality.patch Compile-tested on: ar7 Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 3.18 to 3.18.132Koen Vandeputte2019-01-163-6/+6
| | | | | | | | | Refreshed all patches. Compile-tested: adm5120 Runtime-tested: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* firmware-utils: mksercommfw: overhaul image creationMathias Kresin2019-01-154-281/+135
| | | | | | | | | | | | | | | | | | | | Move the zip compression into a build recipe. Pad the image using the existing build recipes as well to remove duplicate functionality Change the code to append header and footer in two steps. Allow to use a fixed filename as the netgear update image does. Use a fixed timestamp within the zip archive to make the images reproducible. Due to the changes we are now compatible to the gnu89 c standard used by default on the buildbots and we don't need to force a more recent standard anymore. Beside all changes, the footer still looks wrong in compare to the netgear update image. Signed-off-by: Mathias Kresin <dev@kresin.me>
* tools: zip: add option for reproducible archivesMathias Kresin2019-01-151-0/+145
| | | | | | | | | | | Add the option -mt/--mtime to pass a timestamp which is used as filedate for the containing files. So far, it isn't used for anything written to the extra fields, therefore requires the -X (eXclude eXtra file attributes) parameter to be effective. Signed-off-by: Mathias Kresin <dev@kresin.me>
* tools: add zip utilityMathias Kresin2019-01-159-1/+234
| | | | | | | One image requires a zip compressed image, so add the zip util found in the packages feed, and extend it with some useful debian patches. Signed-off-by: Mathias Kresin <dev@kresin.me>
* odhcpd: update to latest git HEAD (FS#2020)Hans Dedecker2019-01-151-3/+3
| | | | | | | | | | | 7abbed4 dhcpv6: add setting to choose IA_NA, IA_PD or both dd1aefd router: add syslog tracing for skipped routes 0314d58 router: filter route information option 5e99738 router: make announcing DNS info configurable (FS#2020) 1fe77f3 router: check return code of odhcpd_get_interface_dns_addr() 8f49804 config: check for invalid DNS addresses Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* kmod-sched-cake: bump to latest cakeKevin Darbyshire-Bryant2019-01-141-3/+3
| | | | | | | | | | 331ac70 Correctly update parent qlen when splitting GSO packets 581967c Makefile: Hook into Kbuild/Kconfig infrastructure The parent qlen change is relevant if using cake as a leaf qdisc, the makefile is a no-op. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* elfutils: bump to 0.175Kevin Darbyshire-Bryant2019-01-141-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4ea9a2db164c Update upload-release.sh script and po files. a01938d584b9 libelf: Mark both fsize and msize with const attribute. c338a0541663 libebl: Don't update w, t and len unnecessarily in ebl_object_note_type_name. 422b549007f6 Prepare for 0.175 22ec8efc1dd8 elflint: Allow PT_GNU_EH_FRAME segment to match SHT_X86_64_UNWIND section. cf10453f8252 libelf: Correctly setup alignment of SHF_COMPRESSED section data. d3e6266754b9 strip: Also handle gnu compressed debug sections with --reloc-debug-sections 72e30c2e0cb4 Handle GNU Build Attribute ELF Notes. 7a3f6fe60b85 Recognize NT_VERSION notes. cff53f1784c9 libcpu: Recognize bpf jump variants BPF_JLT, BPF_JLE, BPF_JSLT and BPF_JSLE ecbe3120cddb libdwelf: New function dwelf_elf_begin. 4b0342b85b5b backends: Add x86_64 section_type_name for SHT_X86_64_UNWIND. 825e48c4e942 Also find CFI in sections of type SHT_X86_64_UNWIND 4789e0fb92b0 libelf: Explicitly update section data after (de)compression. 1628254ba215 strip: Add --reloc-debug-sections-only option. f2d59180b90b strip: Extract code to update shdrstrndx into new common function. f6ae0ab9350e strip: Split out debug section relocation into separate helper functions. b15ee95bcee4 strip: Always copy over any phdrs if there are any. e574889d92b1 unstrip: Add ELF_CHECK to make sure gelf_getehdr () doesn't return NULL. 5199e15870e0 Recognize and parse GNU Property notes. b75ff1bbd060 addr2line: Use elf_getshdrstrndx not Ehdr field to print section name. 35197ea4c43e readelf: Use shstrndx to lookup section names. 9a74c190a2b3 backends: ppc use define instead of const for size of dwarf_regs array. 72d023b35f36 readelf: Make sure readp is smaller than cieend in print_debug_frame_section. dce0b3b63ba0 readelf: Make sure readp is smaller than cieend in print_debug_frame_section. 1e7c230b277b Check sh_entsize is not zero. 22d2d082d57a size: Handle recursive ELF ar files. 2b16a9be6993 arlib: Check that sh_entsize isn't zero. 4cdb0fd0d3b4 ar: Assume epoch if ar_date is bogus. 577511f66842 findtextrel: Check that sh_entsize isn't zero. 20f9de9b5f70 libdwfl: Sanity check partial core file data reads. 2f4a040fab52 readelf: Handle multiple .debug_macro sections and decode header flag. eee4269e5315 unstrip: Renumber the group section indexes. c06ab0bbb476 strip, unstrip: Handle SHT_GROUP correctly. 2876b3b648f6 Handle ADD/SUB relocations 69d6e67eee30 tests: backtrace-dwarf.c improve error handling in test framework. Originally-produced--by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: bump 4.14 to 4.14.93Stijn Tintel2019-01-1447-325/+106
| | | | | | | | | | | | | Refresh patches. Remove upstreamed patches: - backport/096-mips-math-emu-Write-protect-delay-slot-emulation-pages.patch - pending/510-f2fs-fix-sanity_check_raw_super-on-big-endian-machines.patch - brcm2708/950-0415-qmi_wwan-apply-SET_DTR-quirk-to-the-SIMCOM-shared-de.patch Compile-tested: ar71xx, ath79, brcm2708/bcm27{08,10}, octeon, x86/64 Runtime-tested: ar71xx, ath79, brcm2708/bcm27{08,10}, octeon, x86/64 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* busybox: fix ALTERNATIVES alphabetical orderingHans Dedecker2019-01-131-2/+2
| | | | | | | Commit 3f0eb71dae added ALTERNATIVES for wget but not in correct alphabetical order; increase PKG_RELEASE as well. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* firmware-utils: mkdlinkfw: fix buildMathias Kresin2019-01-131-1/+1
| | | | | | | | | | | | | While we don't need the gnu99 option anymore, we still need to force the c99 standard to fix the following build error on the build bots: src/mkdlinkfw.c: In function 'find_auh_headers': src/mkdlinkfw.c:267:3: error: 'for' loop initial declarations are only allowed in C99 or C11 mode for (int i = 0; i < header_counter; i++) { ^ src/mkdlinkfw.c:267:3: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code Signed-off-by: Mathias Kresin <dev@kresin.me>
* build: remove duplicate mksercomfw image recipeMathias Kresin2019-01-131-10/+0
| | | | | | | Keep the ramips/mt76x8 copy, since it's only required for this target at the moment. Signed-off-by: Mathias Kresin <dev@kresin.me>
* firmware-utils: mkdlinkfw: fix error handlingMathias Kresin2019-01-131-3/+3
| | | | | | | fread() doesn't set errno, ferror need to be used to check for errors. While at it, check if we read the expect number of elements. Signed-off-by: Mathias Kresin <dev@kresin.me>
* firmware-utils: mkdlinkfw: create reproducible headerMathias Kresin2019-01-131-3/+18
| | | | | | | | Use the SOURCE_DATE_EPOCH environment variable if set instead of the current time. The used timestamp matches the timestamp of the latest commit this way and make the images reproducible. Signed-off-by: Mathias Kresin <dev@kresin.me>
* firmware-utils: mkdlinkfw: cleanup codeMathias Kresin2019-01-134-42/+5
| | | | | | | Drop unused function and macros. With the cleanup the gnu extension typeof isn't used any longer and the gnu99 compile flag can be dropped. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uclient: add ALTERNATIVES for wgetHans Dedecker2019-01-131-1/+2
| | | | | | | | Don't symlink uclient-fetch anymore to /bin/wget but rather use the ALTERNATIVES support for wget to install it as /usr/bin/wget. Let uclient-fetch provide wget Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* busybox: add ALTERNATIVES for wgetHans Dedecker2019-01-131-0/+1
| | | | | | | Busybox wget applet conflicts with the version from uclient. Fix this by using ALTERNATIVE support for wget in busybox. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uboot-sunxi: Orange Pi Zero Plus: Fix SdCard detectionHauke Mehrtens2019-01-131-0/+28
| | | | | | | | | The Detection pin is at PF6 and not at PH13 like defined before. I checked the schematics and now I am am not seeing this error message any more: Loading Environment from FAT... Card did not respond to voltage select! Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: disable AXP209 on Olimex A13 OlinuxinoZoltan HERPAI2019-01-131-0/+19
| | | | | | | | | | | | | | Disable the PMIC on Olimex A13 Olinuxino, as the SPL cannot set the core voltage correctly, which causes the board to freeze later at kernel if CPU throttling is enabled (see below). This will almost certainly kill the VGA output (which requires LDO3 to be set), but this is still a better option than to disable CPU throttling for all Cortex-A8 based devices. [ 2.485632] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 384000 KHz [ 2.525698] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 432000 KHz Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 11:17:48 +0000