aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* base-files: use procd init for urandom_seedEtienne CHAMPETIER2016-07-272-25/+28
| | | | | | | | | | Previous implementation was blocking the init and breaking halt/reboot/sysupgrade (reported by Daniel Golle) v2: use procd logging, use set -e + trap for error handling Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com> Tested-by: Daniel Golle <daniel@makrotopia.org>
* mvebu: limit image builds to profile selectionFelix Fietkau2016-07-261-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files: remove support of profile-specific base-filesFelix Fietkau2016-07-261-15/+0
| | | | | | | It is incompatible with multi-profile builds and has not been used in-tree anyway. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath9k: fix warning in client mode (GH#195)Felix Fietkau2016-07-261-0/+69
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: remove image prefix from kernel files in KDIRFelix Fietkau2016-07-251-6/+7
| | | | | | | This allows the image builder to change EXTRA_IMAGE_NAME at a later point in time without breaking the build Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: remove cpio.gz and tar.gz from regular filesystem typesFelix Fietkau2016-07-252-15/+16
| | | | | | | They are not used to produce regular firmware images anyway. Instead, call their build templates directly if enabled in the config Signed-off-by: Felix Fietkau <nbd@nbd.name>
* image: remove shell calls from legacy ubi/ubifs image codeFelix Fietkau2016-07-252-11/+5
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kirkwood: fix UBIFS_OPTS variable in image buildFelix Fietkau2016-07-251-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Remove existing old link before creating a new oneStefan Weil2016-07-251-1/+2
| | | | | | | This is needed after a kernel update, otherwise the new link is written as linux/linux-$(LINUX_VERSION). Signed-off-by: Stefan Weil <sw@weilnetz.de>
* apm821xx: fix atheros PCIe cards on the MR24Christian Lamparter2016-07-251-9/+12
| | | | | | | | | | | | | | | The consolidation of the MR24 and WNDR4700 subtargets into the nand subtarget broke MR24's atheros wlan. This was because the wndr4700's board code used a pci_fixup routines to supply the ath9k module with the calibration data. This is not necessary on the MR24 as it has standard mini-pcie ports. Hence the two AR9380 mini-pcie cards do not need any calibration data overrides. Cc: chrisrblake93@gmail.com Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: use lzma compression for the initramfs imagesChristian Lamparter2016-07-252-1/+2
| | | | | | | | | | | | | | | | | | | | | | The MR24's u-boot takes it sweet time decompressing the LZMA-packed initramfs image. A user reported that compared to the old gzip method in v2: it "takes a ton longer to decompress like 4\x the old boot time for decompression". This patch also fixes a issue with the WNDR4700's initramfs image getting to big and causing the following u-boot crash during the decompression: "Uncompressing Multi-File Image ... Error: inflate() returned -5 out-of-mem or overwrite error - must RESET board to recover" This patch fixes both issues by reverting the MR24's initramfs compression method back to gzip. And choosing to compress the initramfs within the initramfs image as LZMA by default. Cc: chrisrblake93@gmail.com Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath9k: remove intermediate queueing patch until it is fixed properlyFelix Fietkau2016-07-241-871/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* iperf3: update to version 3.1.3Hauke Mehrtens2016-07-241-2/+2
| | | | | | | | | | old size: iperf3_3.0.11-1_mips_34kc_dsp.ipk 30147 new size: iperf3_3.1.3-1_mips_34kc_dsp.ipk 33640 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* iperf: update to version 2.0.9Hauke Mehrtens2016-07-241-2/+2
| | | | | | | | | | old size: iperf_2.0.8-1_mips_34kc_dsp.ipk 27911 new size: iperf_2.0.9-1_mips_34kc_dsp.ipk 28681 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* cyassl: update to wolfssl version 3.9.6Hauke Mehrtens2016-07-241-2/+2
| | | | | | | | | | | | Changelog: https://www.wolfssl.com/wolfSSL/Docs-wolfssl-changelog.html old size: libcyassl_3.9.0-1_mips_34kc_dsp.ipk 147552 new size: libcyassl_3.9.6-1_mips_34kc_dsp.ipk 150087 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* curl: update to version 7.50.0Hauke Mehrtens2016-07-242-4/+4
| | | | | | | | | | | | | | Changelog: https://curl.haxx.se/changes.html old sizes: libcurl_7.49.0-1_mips_34kc_dsp.ipk 97569 curl_7.49.0-1_mips_34kc_dsp.ipk 37925 new sizes: libcurl_7.50.0-1_mips_34kc_dsp.ipk 97578 curl_7.50.0-1_mips_34kc_dsp.ipk 38017 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* openssl: re-enable NPN by defaultFelix Fietkau2016-07-241-1/+1
| | | | | | Several packages rely on it Signed-off-by: Felix Fietkau <nbd@nbd.name>
* openssl: add back the CAST cipher by defaultFelix Fietkau2016-07-241-1/+1
| | | | | | At least netatalk and some ipsec packages use it Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools: bring back genext2fs for apm821xxFelix Fietkau2016-07-237-4/+688
| | | | | | | | This reverts commit 8c68c104eaba65273280c7a4727fbb10ab10f5af. It is used for apm821xx, which needs ext2 (not ext4) images for some devices. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* linux: Get rid of 000-keep_initrafs_the_default.patchAlexey Brodkin2016-07-233-75/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With that patch in place for initramfs no additional options are reported for "/" partition. What's really important is missing info about sizes. Which in its turn makes opkg think that there's no space on "/" partition to install software. I understand that's a sort of corner-case, people rarely install packages on ramfs but anyways why not? Just in case that's what I see with the patch: ---------------------->8-------------------- root@lede:/# cat /proc/mounts rootfs / rootfs rw 0 0 proc /proc proc rw,nosuid,nodev,noexec,noatime 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,noatime 0 0 tmpfs /tmp tmpfs rw,nosuid,nodev,noatime 0 0 tmpfs /dev tmpfs rw,nosuid,relatime,size=512k,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,mode=600 0 0 debugfs /sys/kernel/debug debugfs rw,noatime 0 0 ---------------------->8-------------------- And without: ---------------------->8-------------------- root@lede:/# cat /proc/mounts rootfs / rootfs rw,size=256168k,nr_inodes=32021 0 0 proc /proc proc rw,nosuid,nodev,noexec,noatime 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,noatime 0 0 tmpfs /tmp tmpfs rw,nosuid,nodev,noatime 0 0 tmpfs /dev tmpfs rw,nosuid,relatime,size=512k,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,mode=600 0 0 debugfs /sys/kernel/debug debugfs rw,noatime 0 0 ---------------------->8-------------------- Note how different is entry for rootfs. And given there's no known rationale for that patch we're getting rid of it. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Jonas Gorski <jonas.gorski@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: John Crispin <john@phrozen.org> Cc: Felix Fietkau <nbd@nbd.name>
* openssl: revert the no-ripemd change, openssh needs that cipherFelix Fietkau2016-07-231-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k: Support installing CT firmware for QCA9984 NICs.Ben Greear2016-07-231-0/+35
| | | | | | | | | This firmware has been lightly tested on non LEDE system to date, and will be undergoing further testing and development. Allow users to easily install this on their LEDE system as they prefer. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct-firmware: Update to latest 9880 firmware.Ben Greear2016-07-231-2/+2
| | | | | | Fixes some issues with AES encryption and macbooks. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct: Update to latest ath10k-ct driver.Ben Greear2016-07-231-2/+2
| | | | | | Adds support for 9984 NICs, and an upstream bugfix or two. Signed-off-by: Ben Greear <greearb@candelatech.com>
* sunxi/pcduino3: Remove selection of absent rtl8188euAlexey Brodkin2016-07-231-1/+1
| | | | | | | | | Since commit 217a64375547 "wireless: remove rtl8188eu (staging)" there's no point in selection of the missing module. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: John Crispin <john@openwrt.org> Cc: Zoltan Herpai <wigyori@uid0.hu>
* openssl: add option to disable SRP supportDirk Feytons2016-07-232-1/+11
| | | | Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
* openssl: add --gc-sectionsDirk Feytons2016-07-231-1/+2
| | | | Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
* openssl: remove some unneeded functionality and algorithmsDirk Feytons2016-07-232-3/+28
| | | | | | | | The patch needed for this commit has been sent upstream: https://github.com/openssl/openssl/pull/1155 Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [add back bf and srp]
* openssl: add option to disable PSK supportDirk Feytons2016-07-232-1/+11
| | | | Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
* openssl: add option for NPN supportDirk Feytons2016-07-233-1/+23
| | | | | | | | NPN has been superseded by ALPN so NPN is disabled by default The patch has been sent to OpenSSL for inclusion, see https://github.com/openssl/openssl/pull/1100 Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
* openssl: add option to disable compression supportDirk Feytons2016-07-232-3/+15
| | | | | | | By default it's disabled. After the CRIME attack it seems the use of compression is discouraged. Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
* openssl: add option to omit deprecated APIsDirk Feytons2016-07-232-1/+11
| | | | Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
* ledtrig-usbdev: fix duplicate match detectionFelix Fietkau2016-07-231-4/+5
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: add ath10k firmware to profile defaults where ath10k is usedFelix Fietkau2016-07-224-33/+33
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* image.mk: create default ubifs before calling legacy image build codeFelix Fietkau2016-07-221-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* apm821xx: rework image build code for MyBook LiveFelix Fietkau2016-07-221-11/+13
| | | | | | | Eliminate redundant mkfs calls, preparation for upcoming image build core rework Signed-off-by: Felix Fietkau <nbd@nbd.name>
* apm821xx: add DEVICE_DTS_DIR variable, remove redundant DEVICE_VARS entryFelix Fietkau2016-07-221-1/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* apm821xx: add missing default profiles for subtargetsFelix Fietkau2016-07-223-0/+41
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* apm821xx: add support for the Netgear Centria N900 WNDR4700/WNDR4720Christian Lamparter2016-07-2217-1/+2129
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for Netgear Centria N900 WNDR4700/WNDR4720 hardware highlights: CPU: AMCC PowerPC APM82181 Rev. E at 1000 MHz (PLB=166, OPB=83, EBC=83 MHz) Security support, Boot ROM Location NAND wo/ECC 2k page (8 bits) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: AMCC APM82181 Evaluation Board, PCIE0/SATA1, 1*USB OTG DRAM: 256 MB (ECC not enabled, 500 Mb/s, 32-bit, CL3) NAND: 128 MiB (SLC, erase size: 128 KiB, page size: 2048, OOB size: 64) ETH: Atheros AR8327N Gigabit Switch (4 x LAN, 1 x WAN) USB: 2 x 3.0 (Renesas uPD720202K8-711-BAA-A, firmware not included) SATA: 1 x SATA-II 3.5" Hard Drive Bay for HDDs (DesignWare SATA). WLAN1: Atheros AR9380 5GHz 802.11an 3:3x3 WLAN2: Atheros AR9581 2.4GHz 802.11bgn 3:3x3 SDCARD: GL827L SD/MMC/MS Flash Card Reader (on internal dwc2 USB 2.0 host) I2C: GMT G781 (i2c-0 @ 0x4d - lm90 compatible temperature sensor) TC654 (i2c-0 @ 0x1b - Dual PWM fan Speed controller) WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! INFO: Since this device only has a NAND chip. I opted for going with root.squashfs in a UBI volume. There's no squashfs/jffs2 image. This target produces three images. a. netgear factory image This image can be used to flash the Netgear WNDR4700 via the firmware recovery mechanism and the web admin site. The bootloader can be instructed to do a firmware recovery via the # fw_recovery command. It will start a tftp server and listen on 192.168.1.1 (the ipaddr variable in u-boot) for incoming, binary tftp clients. The firmware recovery mechanism is also started if any of the flash content which contains the kernel, device-tree definitions or the (fake)rootfs fails to verify or load. b. sysupgrade.tar image for sysupgrade An sysupgrade will replace the entire current LEDE installation with a newer version. This does include the kernel and the ubi rootfs partition. The configuration can be carried over automatically as well if desired. simply copy the sysupgrade.tar to a the WNDR4700 running LEDE and run: root@lede:~# sysupgrade sysupgrade.tar and let it reboot. Note: The devicetree flash area is NOT updated. Until the devicetree definition is stable, this can lead to all sorts of hardware detection problems! So make sure, if you experience issues: try the fw_recovery. If you are unsure whenever this affects you: test if you can reproduce your issue with the initramfs method. As it will always have up-to-date device-tree definitions. c. initramfs image for TFTP (for development and testing) To use the initramfs method, follow the following steps: 1) Move the "lede-apm821xx-netgear-WNDR4700-initramfs-kernel.bin" file to to the root directory of your TFTP server. 2) rename it to wndr4700.bin 3) On the WNDR4700 - Hit Enter during u-boot and insert: # tftp 400000 wndr4700.bin; run addtty; bootm 400000 - This will boot the LEDE image. Note: The default tftp server is 192.168.1.7, if you want to change it: # setenv serverip 192.168.8.7; Note2: The default address for the WNDR4700 is 192.168.1.1: # setenv ipaddr 192.168.8.8; Note: Connect you tftp server on the last LAN port (not the WAN) Note: The firmware for the USB 3.0 Host chip is not included anymore. Therefore the two USB 3.0 ports will not work without the uPD7070x-firmware package installed. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: lm90 add thermal sensor interface support for device treeChristian Lamparter2016-07-222-0/+453
| | | | | | | | | | | | | | From 912-hwmon-lm90-expose-to-thermal-fw-via-DT.patch: "This patch adds to lm90 temperature sensor the possibility to expose itself as thermal zone device, registered on the thermal framework. The thermal zone is built only if a device tree node describing a thermal zone for this sensor is present inside the lm90 DT node. Otherwise, the driver behavior will be the same." Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: tc654: add driver for Microchip TC654/TC655 PWM fan controllersChristian Lamparter2016-07-221-0/+1037
| | | | | | | | | | | | | | | | | | | This patch adds a hwmon driver for the Microchip TC654 and TC655 Dual SMBus PWM Fan Speed Controllers with Fan Fault detection. The chip is described in the DS2001734C Spec Document from Microchip. It supports: - Shared PWM Fan Drive for two fans - Provides RPM - automatic PWM controller (needs additional NTC/PTC Thermistors.) - Overtemperature alarm (when using NTC/PTC Thermistors) The TC654 is used by the Netgear WNDR47X0 to control its system fan. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: add support for the Western Digital MyBook Live SeriesChristian Lamparter2016-07-2220-2/+1006
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware Highlights: This patch adds support for Western Digital MyBook Live Series: CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: Apollo-3G - APM82181 Board, 1*SATA DRAM: 256 MB (2x NT5TU64M16GG-AC) FLASH: 512 kB (SST 39VF040) Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The MyBook Live Duo additionally features a 1x USB 2.0 host port and can support a second hard-drive. This target produces two images for a target. 1. ext4 image The extracted/raw image can be directly installed on the internal HDD via "dd if=img.ext4 of=/dev/sdX". This can either be done in place with the stock MyBook Live firmware via ssh. Or by removing the HDD and writing the image with a different PC. The the compressed images are useful for sysupgrade. 2. recovery.tar image for TFTP and Serial. extract the recovery.tar to a TFTP server directory. On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: sata_dwc_460ex: backport fixes and cleanups from 4.7Christian Lamparter2016-07-221-0/+1088
| | | | | | | | | | This patch fixes the sata_dwc_460ex SATA driver which is used by the SATA controllers in the MyBook Live Series and WNDR4700. The code was backported from the upstream kernel. It can be dropped completely on 4.7+. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: dw_dmac: backport fixes and cleanups from 4.7Christian Lamparter2016-07-224-0/+2303
| | | | | | | | | | This patch fixes the dw_dmac dma engine which is used by the SATA controllers in the MyBook Live Series and WNDR4700. The code was backported from the upstream kernel. It can be dropped completely on 4.7+. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: add support for the Cisco Meraki MR24Chris Blake2016-07-2216-10/+732
| | | | | | | | | | | | | | | | | | | This patch adds support for the Cisco Meraki MR24 Access point to the apm821xx target. Board: MR24 - Meraki MR24 Cloud Managed Access Point CPU: APM82181 SoC 800 MHz (PLB=200 OPB=100 EBC=100) Flash size: 32MiB RAM Size: 128MiB Wireless: Atheros AR9380 5.0GHz + Atheros AR9380 2.4GHz Ethernet ports: 1x Gigabit Atheros AR8035 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! For flashing instructions, visit: <https://github.com/riptidewave93/Openwrt-MR24/blob/master/README.md#flashing> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* apm821xx: add support for the apm821xx device targetChris Blake2016-07-2215-0/+1178
| | | | | | | | This adds a new target for PowerPC APM82181 and APM82161 (464-based) boards, as well as adds support for the booke-wdt watchdog package. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* ppc4xx: remove booke-wdt watchdog packageChristian Lamparter2016-07-225-18/+4
| | | | | | | | This patch gets rid of the booke watchdog kmod package. Instead the affected boards will enable it in their kernel configs. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* lantiq: fix image creation of P2812HNUF3 & BTHOMEHUBV3AMathias Kresin2016-07-221-2/+2
| | | | | | | | Both devices were converted to the new image build code but still using the LegacyDevice define. Therefore an image isn't created for the mentioned devices. Signed-off-by: Mathias Kresin <dev@kresin.me>
* libpcap: fix dependency of install-shared-so make targetMatthias Schiffer2016-07-211-16/+20
| | | | | | | | | | | | | There seems to be a situation in which a rebuild of libpcap.so is triggered in the install step of the libpcap Makefile. libpcap.so is the wrong target, leading to the build failure reported in [1]. Fix the dependency of install-shared-so to $(SHAREDLIB) so the build can succeed in this case. [1] https://dev.openwrt.org/ticket/19894 Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* samba36: avoid picking up a dependency on libunwind (fixes GH #212)Felix Fietkau2016-07-211-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 23:20:43 +0000