aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: fix of_node handling in LEDs core codeRafał Miłecki2017-03-086-0/+496
| | | | | | | | | This backports fixes for setting of_node and making it possible to read extra info from DT. This was partially fixed by: [PATCH] leds: leds-gpio: Set of_node for created LED devices but it didn't work during initialization. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* brcm2708: detect Raspberry Pi Zero WStijn Tintel2017-03-083-1/+8
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* brcm2708: order boards and models alphabeticallyStijn Tintel2017-03-084-20/+24
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ramips: fix Linksys RE6500 switch port mappingJo-Philipp Wich2017-03-071-1/+4
| | | | | | | | Properly map the internal switch ports to the proper LAN1..LAN4 labels. Fixes #530. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* openvpn: move list of params and bools to a separate fileYousong Zhou2017-03-073-30/+205
| | | | | | | So that future patches for addition/removal of them can be more readable Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* procd.sh: use parameterized respawn valuesClaudiu Brasovean2017-03-071-1/+3
| | | | | | | | | | continue work started here: http://patchwork.ozlabs.org/patch/520859 Extend /etc/config/system with parameters to set the default respawn treshold and respawn timeout for procd launched services that have respawn enabled. This results in cleaner init scripts, while making sure services have respawn parameters set. Signed-off-by: Claudiu Brasovean <cbrasho@gmail.com>
* ar71xx: fix build without CONFIG_NOP_USB_XCEIV (FS#593)Felix Fietkau2017-03-072-11/+7
| | | | | | | | Open-code usb_phy_generic_register instead of calling it, since it is really trivial. Avoid pulling CONFIG_NOP_USB_XCEIV into the kernel config and add a proper dependency instead Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix usb chipidea controller supportFelix Fietkau2017-03-071-8/+19
| | | | | | | | | | | | | If ehci platform driver is loaded before the chipidea controller driver, both are competing for the same IO resources and the generic driver gets used for the hardware. This results in USB device mode being unavailable. Split generic EHCI support code out of kmod-usb2, so that the chipidea driver can be included without also pulling in the generic one. Also rework the load order, so that the chipidea driver gets loaded first, in case both are installed Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: disable deprecated CONFIG_USB_EHCI_ATH79 symbolFelix Fietkau2017-03-073-1/+2
| | | | | | USB_EHCI_HCD_PLATFORM is used instead Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ppp: propagate master peerdns setting to dynamic slave interfaceJo-Philipp Wich2017-03-073-2/+4
| | | | | | | | | | Honour the parent interfaces peerdns option when spawning a virtual DHCPv6 interface in order to avoid pulling in IPv6 DNS servers when the user opted to inhibit peer DNS servers in the configuration. Fixes #597. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* odhcpd: add loglevel uci option in odhcpd defaultsHans Dedecker2017-03-061-0/+1
| | | | Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* procd: update to git HEAD versionHans Dedecker2017-03-061-3/+3
| | | | | | | 8f218f5 procd: service gets deleted when its last instance is freed 35209a0 procd: update modprobe path Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcp6c: update to git HEAD versionHans Dedecker2017-03-061-3/+3
| | | | | | c69555c dhcpv6: use PRIu64 print macro Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* opkg: fix several package installation bugsJo-Philipp Wich2017-03-061-3/+3
| | | | | | | | | | | | | | | Update to latest Git in order to import the following fixes: 19070b6 unarchive: fix possible segmentation fault in deb_extract() 758527e pkg: forward "provided_by_hand" flag in pkg_merge() 1fdc2ca pkg: mark bit fields in pkg_t unsigned 15fc1ee opkg_cmd: avoid null pointer dereference in opkg_what_depends_conflicts_cmd() 439c89e opkg_cmd: fix endless loop in whatprovides/whatreplaces 0fb3e9f pkg_depends: propagate virtual provided detail flag to providers 793155f pkg_depends: fix unsatisfied dependency installation order b1dc770 libopkg: fix some overly aggressive line wrapping in pkg_depends.c Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: fix whiteout rename on ubifs (FS#579)Felix Fietkau2017-03-061-0/+25
| | | | | | This was apparently caused by some linux upstream merge damage Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: set status led for the gl-* boardsWojciech Jowsa2017-03-064-128/+129
| | | | Signed-off-by: Wojciech Jowsa <w.jowsa@radytek.com>
* kernel: more tpm related symbolsJohn Crispin2017-03-063-0/+5
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* fstools: add blockdJohn Crispin2017-03-062-3/+38
| | | | | | this daemon replaces mountd. Signed-off-by: John Crispin <john@phrozen.org>
* mountd: drop in favour of blockdJohn Crispin2017-03-063-70/+0
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* odhcpd: Bump to latest HEADFlorian Fainelli2017-03-051-3/+3
| | | | | | | | Brings in the following change: 9eac2a896341 dhcpv6-ia: Check lockf return value Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* malta: restore "be" subtarget from being source-onlyYousong Zhou2017-03-054-1/+4
| | | | | | | | | | The malta "be" and "le" subtargets share the arch with many devices of ar71xx and ramips. They can be handy for testing, debugging, trying both snapshot and release builds. This commit makes the "be" subtarget part of the ci and release builds Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* toolchain: Allow external toolchains to specify libthread-dbFlorian Fainelli2017-03-041-0/+28
| | | | | | | | | | | | | | | | | We need to let external toolchains be able to specify the path and specification file to the libthread-db POSIX thread debugging shared libraries. This fixes GDB not being able to be installed because it is depending on libthread-db: Collected errors: * satisfy_dependencies_for: Cannot satisfy the following dependencies * for gdb: * libthread-db * * opkg_install_cmd: Cannot install package gdb. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* brcm2708: add support for the new Raspberry Pi Zero WÁlvaro Fernández Rojas2017-03-042-5/+9
| | | | | | Support is experimental since I haven't got any device to test. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708-gpu-fw: update to latest versionÁlvaro Fernández Rojas2017-03-041-7/+7
| | | | | | This is needed in order to add support for the new RPi Zero W Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: update linux 4.9 patches to latest versionÁlvaro Fernández Rojas2017-03-04203-2012/+8458
| | | | | | | | | | As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.9.y - Remove led1 from diag.sh for RPi3 since it causes boot issues. - Fix modules.mk typos. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: update kernel 4.4 to 4.4.52Kevin Darbyshire-Bryant2017-03-0315-98/+30
| | | | | | | | | | | | Bump kernel from 4.4.50 to 4.4.52 Refresh patches Compile tested all 4.4. targets Run tested: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* kernel: fix kmod-tpm-tis packagingJo-Philipp Wich2017-03-031-1/+3
| | | | | | The tmp-tis module depends on tpm_tis_core.ko, so package this file as well. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ath10k-firmware: update qca9984 firmwarePavel Kubelun2017-03-031-3/+3
| | | | | | Bump qca9984 firmware. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ubox: update to the latest versionFelix Fietkau2017-03-031-3/+3
| | | | | | 21a4bd0 kmodloader: modprobe: return 0 for loaded modules Signed-off-by: Felix Fietkau <nbd@nbd.name>
* openssl: Use mkhash for STAMP_CONFIGUREDFlorian Fainelli2017-03-011-1/+1
| | | | | | | | | | | | | The current way of creating a STAMP_CONFIGURED filename for OpenSSL can lead to an extremely long filename that makes touch unable to create it, and fail the build. Use mkhash to produce a hash against OPENSSL_OPTIONS which creates a shortert stamp file, Fixes #572 Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* rssileds: Fix build with external toolchainsFlorian Fainelli2017-03-011-2/+4
| | | | | | | | Pass down TARGET_CPPFLAGS for path to header files, and append the libraries we depend on in TARGET_LDFLAGS. Put TARGET_LDFLAGS at the end of the command line as is required by modern GCC/binutils. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* adb: Also pass TARGET_CPPFLAGSFlorian Fainelli2017-03-011-1/+1
| | | | | | | Fixes build issues with external toolchains that do not have STAGING_DIR in their default search path. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* swconfig: Link with libuboxFlorian Fainelli2017-03-011-1/+1
| | | | | | | | | | | | | | | | | | | Fixes linking failures observed with external toolchains: /home/florian/dev/toolchains/stbgcc-4.8-1.5/bin/../lib/gcc/mipsel-linux-gnu/4.8.5/../../../../mipsel-linux-gnu/bin/ld: warning: libubox.so, needed by /home/florian/dev/openwrt/trunk/staging_dir/target-mipsel-unknown-linux-gnu_glibc/usr/lib/libuci.so, not found (try using -rpath or -rpath-link) /home/florian/dev/openwrt/trunk/staging_dir/target-mipsel-unknown-linux-gnu_glibc/usr/lib/libuci.so: undefined reference to `blobmsg_open_nested' /home/florian/dev/openwrt/trunk/staging_dir/target-mipsel-unknown-linux-gnu_glibc/usr/lib/libuci.so: undefined reference to `blobmsg_parse' /home/florian/dev/openwrt/trunk/staging_dir/target-mipsel-unknown-linux-gnu_glibc/usr/lib/libuci.so: undefined reference to `blob_nest_end' /home/florian/dev/openwrt/trunk/staging_dir/target-mipsel-unknown-linux-gnu_glibc/usr/lib/libuci.so: undefined reference to `blobmsg_add_field' Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* px5g: Fix TARGET_LDFLAGS and add TARGET_CPPFLAGSFlorian Fainelli2017-03-011-2/+2
| | | | | | | | Make sure we pass down TARGET_CPPFLAGS to let toolchains with no default search paths to find the mbdetls headers, and override TARGET_LDFLAGS to include libraries we are linking against. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* omcproxy: Update to latest HEADFlorian Fainelli2017-03-011-3/+3
| | | | | | | Brings the following change: 1fe6f48f8a50 Cmake: Find libubox/list.h Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* usbmode: Update to latest HEADFlorian Fainelli2017-03-011-3/+3
| | | | | | | | | | | Brings the following changes: 22f041e18df0 Extend StandardEject sequence to include LUN 1 61fdf7e9b1cc cmake: Search for libjson-c 2769852e76b5 cmake: Find libubox/blobmsg_json.h 8a47c4b6649f add TargetClass support Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* bsdiff: Also pass down TARGET_CPPFLAGSFlorian Fainelli2017-03-011-2/+2
| | | | | | | Fixes build with external toolchains not having STAGING_DIR in their default search path(s). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* thc-ipv6: Allow overriding CFLAGSFlorian Fainelli2017-03-011-0/+12
| | | | | | | | thc-ipv6 did not allow an external environment to override CFLAGS, which would lead to our CFLAGS not being passed properly (relro, optimizations, etc...) Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* ramips: remove kmod-mt76* from EX2700 imagesJoseph C. Lehner2017-03-011-1/+1
| | | | | | | These modules are not needed by the EX2700, since it does not have an external wifi chip (MT7620A is covered by rt2x00). Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
* ramips: rename patch file suffix from .c to .patchFurong Xu2017-03-012-0/+0
| | | | Signed-off-by: Furong Xu <xfr@outlook.com>
* ramips: add support for Afoundry EW-1200Francois Goudal2017-03-017-0/+142
| | | | | | | | | | | | | | | | | | | | | | This device features both a 2.4 and 5Ghz radio, and supports 802.11a/b/g/n/ac modes. It has 5 Gb-Ethernet ports and a USB 3.0 host port. It is powered by the Mediatek MT7621 SoC, and the MT7602E and MT7612E wifi chipsets, together with 128MB of RAM and 16 MB of SPI Flash. The stock firmware is in fact based on some openwrt barrier breaker, with a mediatek SDK kernel, and an afoundry custom made web interface (not LuCI based). Firmware update page on the stock web interface can not accept sysupgrade images, it bricks the device. At this point, the only working solution I found was to connect to the serial console port (available on J4 header) and to use opkg to install dropbear. Then scp the sysupgrade file in the device's /tmp and run sysupgrade from console without preserving configuration files. Signed-off-by: Francois Goudal <francois@goudal.net>
* kernel: fix earlycon by keeping __earlycon_tableRafał Miłecki2017-03-012-1/+10
| | | | | | | | Somewhere between 4.4 and 4.9 there was a change that made OF_EARLYCON_DECLARE adding entries to the __earlycon_table instead of __earlycon_of_table. We need to keep this table as well. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: brcmfmac: always print error when PSM's watchdog firesRafał Miłecki2017-03-012-1/+148
| | | | | | This error is important enough to be displayed even without debugging. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: backport Broadcom's iProc QSPI driverRafał Miłecki2017-03-019-0/+2300
| | | | | | | | This driver has been added instead of improving spi-bcm53xx. It has some advantages: allows SPI speed control & hopefully doesn't have bug that was stopping us from using multiple SPI messages for writing flash data. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* opkg: mark as essential (FS#571)Jo-Philipp Wich2017-03-011-0/+1
| | | | | | Flag the opkg package as essential to avoid accidential uninstalls of it. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kirkwood: fix include in etc/board.d/02_networkAlberto Bursi2017-02-281-0/+1
| | | | | | the mtd_get_mac_ascii function called within this script requires the inclusion of /lib/functions/system.sh Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* ramips: add support for HiWiFi HC5962ZengFei Zhang2017-02-286-1/+176
| | | | | | | | | | | | | | | | | | | | | | | | | This patch adds supports for the HiWiFi HC5962(gee4) http://www.hiwifi.com Short specification: - MT7621AT + MT7612EN + 7603EN - 256MB DDR3 RAM - 128MB NAND flash - 1+3 x 1000M Ethernet - 1x USB 2.0 port. 1x USB 3.0 port. - reset button - UART pad on PCB (JP3: TX, RX, GND, 3.3V) Flash instruction: 1, Download lede-ramips-mt7621-hc5962-squashfs-factory.bin 2, Login as root via SSH on 192.168.199.1 and then copy factory.bin(using wget or nc or...) to /tmp/ 3, use the following commands: $ mtd write /tmp/lede-ramips-mt7621-hc5962-squashfs-factory.bin firmware $ mtd erase firmware_backup && reboot After reboot you should be able to login as root via SSH on 192.168.1.1 Signed-off-by: ZengFei Zhang <zhangzengfei@kunteng.org>
* bcm53xx: backport accepted BCM5301X and BCM53573 patchesRafał Miłecki2017-02-2818-0/+1378
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: fix MIPS memory function optimization build error in decompressorFelix Fietkau2017-02-281-10/+20
| | | | | | | | | | | | | | | | | | Fixes the following build error: CC arch/mips/boot/compressed/decompress.o OBJCOPY arch/mips/boot/compressed/vmlinux.bin XZKERN arch/mips/boot/compressed/vmlinux.bin.z OBJCOPY arch/mips/boot/compressed/piggy.o LD vmlinuz arch/mips/boot/compressed/decompress.o: In function `lzma2_lzma': /tmp2/mehrtens/linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_lzma2.c:884: undefined reference to `memmove' make[1]: *** [vmlinuz] Error 1 make: *** [vmlinuz] Error 2 lib/decompress_unxz.c only defines its own memmove function if there is no macro with the same name. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wireless-tools: Change download url to githubHsing-Wang Liao2017-02-281-1/+1
| | | | Signed-off-by: Hsing-Wang Liao <kuoruan@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 02:01:29 +0000