aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: ag71xx: Replace duplicate debugging code with simple function callPetr Štetiar2018-12-171-16/+1
| | | | | | | ag71xx_dump_regs is used in code several times, and is providing same output. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* scripts/qemustart: more compact rand_mac()Yousong Zhou2018-12-171-1/+1
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ipq806x: drop kernel/ rootfs partition images for the ZyXEL NBG6817Stefan Lippers-Hollmann2018-12-171-3/+1
| | | | | | | | | | | | | Since commit 8e9a59a6b924469c0061d4bd945ae0c6dbfdecfe (build: add mkrasimage) a proper factory image can be provided for the ZyXEL NBG6817, which can be flashed from the OEM firmware or used for tftp based push-button recovery, therefore the previously used partition images for mmcblk0p5-rootfs.bin and mmcblk0p4-kernel.bin are no longer required (and using them properly has always been slightly difficult and risky) and can now be dropped from the image generation code. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* ath79: add d-link dir-825-c1 and dir-835-a1Sebastian Kemper2018-12-178-8/+344
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit ports both dir-825-c1 and dir-835-a1 from ar71xx to ath79. They're pretty much identical, except dir-835-a1 has less LEDs. The routers come with 128 MByte of RAM and 16 MBytes of flash and sport 2.4GHz and 5.0GHz wireless. Both routers have entries already in OpenWrt's TOH. Please check there for more information on these antiquities. https://openwrt.org/toh/hwdata/d-link/d-link_dir-825_c1 https://openwrt.org/toh/hwdata/d-link/d-link_dir-835_a1 Installation: 1. Connect to the web interface of the vendor firmware (usually listening on 192.168.0.1). 2. Go to "Tools", then "Firmware". 3. In the "Firmware Upgrade" box click "Browse". 4. Select the OpenWrt factory image for your router. 5. Click "Upload", confirm the popups if you agree to flash the file you selected. 6. Wait for firmware upgrade to complete. It takes about 5 minutes. Run-tested on dir-825-c1. dir-835-a1 should work as well, but I don't have this router so I can't confirm. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [trivial changes]
* image: add cameo-factory commandSebastian Kemper2018-12-171-0/+12
| | | | | | | | | | | This command enables factory image generation for Cameo boards. On upgrade the vendor firmware will check the size of the provided image and if a specific string is located at the end of the binary. cameo-factory will generate an image that the vendor firmware accepts. Tested on a D-Link DIR-825 C1 with vendor firmwares 3.01 and 3.04. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
* ipq40xx: device-tree overhaulChristian Lamparter2018-12-1714-145/+156
| | | | | | | | | | | | - replace licence texts with SPDX-License-Identifier where applicable. - make node-names more generic to fit with Device-Tree Release v0.2 Section 2.2.2 Generic Names Recommendation. - utilize wifi0/1, blsp1_uart1 labels Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: specify "firmware" partition format for EnGenius EAP1300Christian Lamparter2018-12-171-0/+1
| | | | | | | Specify firmware partition format by compatible string. Cc: Steven Lin <steven.lin@senao.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: specify "firmware" partition format for GL.iNet GL-B1300Christian Lamparter2018-12-171-0/+1
| | | | | | Specify firmware partition format by compatible string. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: specify "firmware" partition format for Compex WPJ428Christian Lamparter2018-12-171-0/+1
| | | | | | Specify firmware partition format by compatible string. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: specify "firmware" partition format for ZyXEL WRE6606Christian Lamparter2018-12-171-0/+1
| | | | | | Specify firmware partition format by compatible string. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: specify "firmware" partition format for Netgear EX61[50]0v2Christian Lamparter2018-12-171-0/+1
| | | | | | | Specify firmware partition format by compatible string. Cc: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: specify "firmware" partition format for AVM Fritz!Box 4040Christian Lamparter2018-12-171-0/+1
| | | | | | Specify firmware partition format by compatible string. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: add DT binding support to the fit parserChristian Lamparter2018-12-171-0/+6
| | | | | | It allows specifying default and Netgear parsers directly in the DT. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* base-files: Fix netdev led triggerHauke Mehrtens2018-12-161-1/+4
| | | | | | | | | | In the upstream netdev led trigger the one mode file was replaced by 3 files named rx, tx and link. Fix the netdev trigger configuration code to use the modified API. Fixes: aa3b6a08c56 ("kernel: Replace ledtrig-netdev with upstream backport") Reported-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* omcproxy: use PROJECT_GIT in PKG_SOURCE_URLHans Dedecker2018-12-161-1/+1
| | | | | | Switch PKG_SOURCE_URL to git.openwrt.org Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* Revert "elfutils: install library files for pkg-config"Kevin Darbyshire-Bryant2018-12-161-3/+0
| | | | | | | | | | | | This reverts commit 216397b8124dafafbd79afdf9f8e716b55775194. Due to: Package ip-tiny is missing dependencies for the following libraries: libelf.so.1 Makefile:187: recipe for target '/var/lib/buildbot/slaves/slave-lede-builds4/mips_24kc/build/sdk/bin/packages/mips_24kc/base/ip-tiny_4.19.0-6_mips_24kc.ipk' failed Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* omcproxy: switch to OpenWrt github repoHans Dedecker2018-12-162-40/+5
| | | | | | | Switch to OpenWrt github repo in PKG_SOURCE_URL so we can remove the out of tree patch Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* gemini: Activate USB support againHauke Mehrtens2018-12-161-0/+1
| | | | | | | | | | | This activates the CONFIG_USB_SUPPORT option in the in the gemini kernel again which will provide the core USB support and makes it possible to compile the rest of the USB parts into modules. Without this change USB will not be available in the gemini target and some modules fail to compile because the feature list indicates USB support. Fixes: 10ec966f7ba7 ("gemini: Break out USB to packages") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: Make eapol-test depend on libubusHauke Mehrtens2018-12-161-3/+3
| | | | | | | | The eapol-test application also uses the code with the newly activated ubus support, add the missing dependency. Fixes: f5753aae233 ("hostapd: add support for WPS pushbutton station") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools/sdimage: Fix build with host Linux headers < 3.18Hauke Mehrtens2018-12-161-0/+13
| | | | | | | | The ufb tool needs the host UAPI Linux headers from kernel 3.18 or later, remove it for now as it is not used anyway. Fixes: 4bf5c4395b3 ("tools/sdimage: update to latest git version") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mbedtls: fix compilation on ARM < 6Hauke Mehrtens2018-12-161-0/+27
| | | | | | | | mbedtls uses some instructions introduced in ARMv6 which are not available in older architectures. Fixes: 3f7dd06fd85 ("mbedtls: Update to 2.14.1") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: add support for Netgear R6350NOGUCHI Hiroshi2018-12-165-2/+179
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Netgear R6350 is a wireless router, aka Netgear AC1750. Specification: - SoC: Mediatek MT7621AT (2 CPU cores, 4 threads) - RAM: 128MiB (Nanya NT5CC64M16GP-DI) - ROM: 128MiB NAND Flash (Macronix MX30LF1G18AC-TI) - Wireless: for 11b/g/n (upto 300Mbps): MT7603 for 11a/ac (upto 1450Mbps) : MT7615, is not avaliable now - Ethernet LAN speed: up to 1000Mbps - Ethernet LAN ports: 4 - Ethernet WAN speed: up to 1000Mbps - Ethernet WAN ports: 1 - USB ports: 1 (USB 2.0) - LEDs: 4 (all can be controlled by SoC's GPIO) - buttons: 2 - serial ports: unknown Installation through telnet: - Copy kernel.bin and rootfs.bin to a USB flash disk, plug to usb port on the router. - Enable telnet with link: http://192.168.1.1/setup.cgi?todo=debug (login if required, default: admin password) - You will see "Debug Enabled!" - Telnet 192.168.1.1 and login with "root" - ls /mnt/shares/ to find out path of your USB disk. 'myUdisk' for example. - cd /mnt/shares/myUdisk - mtd_write write rootfs.bin Rootfs - mtd_write write kernel.bin Kernel - reboot recovery when bricked: nmrpflash can be used to recover to the netgear firmware if a broken image was flashed. The SC_PART_MAP partition suggests that an on flash partition table exists. After implementing a partition parser/builder for the sercom partition format, the definitions don't match the flash layout used by the stock firmware. It either means the partition format has not yet been completely understood or it isn't used by the stock firmware. For now, use fixed partitions instead. Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com> [apply latest ramips changes and document the on flash partition map issues] Signed-off-by: Mathias Kresin <dev@kresin.me>
* jffs2: Fix use of uninitialized delayed_work, lockdep breakageDaniel Santos2018-12-164-2/+126
| | | | | | | | | | I've sent this one upstream. This patch is critical if you want to run with "prove lock correctness" (lockdep) and you happen to have certain mtd devices. The misuse of the uninitialized object is undefined behaviour, but being zeroed it does not appear to have actually broken anything other than the lockdep engine. Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
* tools/sdimage: update to latest git versionMichael Heimpold2018-12-161-3/+3
| | | | | | | This includes code cleanups and fixes some portability issues, compiler warnings about printf arguments etc. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* kernel/modules: HMC5843 3D-compass kernel module support enabled.Roman Bazalevsky2018-12-161-0/+17
| | | | Signed-off-by: Roman Bazalevsky <rvb@rvb.name>
* mbedtls: Update to 2.14.1Daniel Engberg2018-12-162-26/+26
| | | | | | | | | | | Update mbedtls to 2.14.1 This fixes: * CVE-2018-19608: Local timing attack on RSA decryption Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> [Update to 2.14.1] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* netfilter: Add fib support for nftablesBrett Mastbergen2018-12-164-0/+19
| | | | Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
* kernel: mv88e6060: disable hardware level MAC learningAnderson Luiz Alves2018-12-163-0/+132
| | | | | | | | | | | | | | | | Disable Marvell's hardware level MAC learning because it breaks station roaming. When enabled it drops all frames that arrive from a MAC address that is on a different port at learning table. Problem description: Multiple APs with inter-AP roaming connected to different ports, when station moves from one AP on one port to another AP on another port, traffic flow breaks down because the learning table is not updated. Signed-off-by: Anderson Luiz Alves <alacn1@gmail.com> [Replaced with upstream version, move to generic] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add mv88e61xx switch port-mirroring supportDeng Qingfang2018-12-162-6/+169
| | | | | | Compile & run tested on mvebu Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* mt76: fix dependenciesDeng Qingfang2018-12-161-1/+1
| | | | | | Only MT76x0U needs kmod-mt76x02-usb Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* swconfig: Add missing includeRosen Penev2018-12-162-1/+2
| | | | | | | | | Fixes these warnings: swlib.c:455:18: warning: implicit declaration of function 'isspace' swlib.c:461:9: warning: implicit declaration of function 'isdigit' Signed-off-by: Rosen Penev <rosenp@gmail.com>
* f2fs-tools: Update to 1.12.0Rosen Penev2018-12-163-2/+61
| | | | | | | | | | | Added two upstream mailing list patches that fix behavior under big endian systems. Issue was present since version 1.11.0. Tested on Turris Omnia. Original discussion: https://github.com/openwrt/openwrt/pull/1575 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* lantiq: add integer latency stat for lantiq-dslAndre Heider2018-12-161-0/+8
| | | | | | | The current stats always have a 'ms' suffix, and they're used by luci. Introduce dsl.latency_[down|up] values, exported in µs without suffix. Signed-off-by: Andre Heider <a.heider@gmail.com>
* rtl8812au: Add out-of-tree driver.Ben Greear2018-12-162-0/+68
| | | | | | | | | Use a forked version of the rtl8812au driver that works better with OpenWRT (fix compile bugs, fix phy MAC address, etc) Signed-off-by: Ben Greear <greearb@candelatech.com> [update to 2018-11-16, replace rtw_byteorder.h, rename folder] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* omcproxy: fix compilation on little-endian CPUsEneas U de Queiroz2018-12-162-1/+36
| | | | | | Don't use cpu_to_be32 outside of a function. Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
* ath79: add support for TP-Link TL-WR842N/ND v1 routerMarcin Jurkowski2018-12-154-0/+175
| | | | | | | | | | | | | | | | | | This ports support for TP-Link TL-WR842N/ND v1 from ar71xx. CPU: Atheros AR7241 400 MHz RAM: 32 MiB FLASH: 8 MiB PORTS: 4 Port 100/10 Switch, 1 Port 100/10 Wan WiFi: Atheros AR9287 LED: SYS, WiFi, LAN, WAN, 3G, QSS BTN: WiFi, Reset/WPS AR71xx target used "tl-mr3420" as board id so force flag is needed if upgrading from old target. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [trivial cleanup]
* ipq806x: add ath10k calibration data MAC addresses patchingChristian Lamparter2018-12-152-35/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ben Greear reported in his patch: |Subject: netgear r7800: Fix mac address of radios. | |Reloading the driver causes the phyX to change, and that |caused the MAC address to change. This is because all ODM/OEMs except QCA bothered to write the correct MAC address for the ath10k wifi into the calibration data. This patch copies over the MAC patching helper functions from ipq40xx's target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata file and converts all the devices to patch the correct MACs into the extracted calibration data before it gets sent to the driver, which sets up the device with the correct MAC address. It also removes the entries in the 10_fix_wifi_mac file as they have served their purpose for good. Please note the C2600: There is conflicting information on what the offset for the second wifi is supposed to be. This patch uses what was specified in 10_fix_wifi_mac. According to Ben Greear this method is save to use with the stock firmware too. As he explained that the stock firmware messes up rx-bssid mask calculation when the MAC is changed after the first vif is created. Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ramips: mt7620: add usb packagesMathias Kresin2018-12-151-4/+16
| | | | | | | | | Add the usb drivers for all boards with enabled ochi/ehci node in the dts file. Fixes: FS#1987 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: mt7620: remove unnecessary usb packagesMathias Kresin2018-12-151-3/+3
| | | | | | These are either installed as dependency or not required at all. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: mt7620: add usb ohci driverMathias Kresin2018-12-151-6/+6
| | | | | | | Add the USB 1.1 driver for all boards not having a fixed USB 2.0 device attached to the USB bus. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: several fixes for HC5x61Deng Qingfang2018-12-156-25/+43
| | | | | | | | | | | | | | | | | | | | | - Mark other partitions as read-only for HC5x61 - Only enable USB and PCIe for HC5761/HC5861 HC5661 doesn't have a USB port, and there is nothing attached to its PCIe. - Fix HC5761 switch ports HC5761 has only 3 ethernet ports (1x WAN + 2x LAN). Remove unused ports. - Fix HC5861 5GHz radio HC5861 has MT7612EN 5GHz WiFi chip, not MT7610EN. - Fix HC5761/HC5861 WiFi LEDs After 5GHz is enabled, it becomes wlan0. And 2.4GHz would be wlan1. - Fix HC5x61 image size It should be 15872k (0xf80000) Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* ipq40xx: integrate ath10kcal_patch_mac into ath10kcal_patch_mac_crcChristian Lamparter2018-12-151-17/+11
| | | | | | | | | | | | | | | In the thread: "ipq806x: add ath10k calibration data MAC addresses patching" Chuanhong Guo <gch981213@gmail.com> noted that: "All ath10k calibration data have a checksum at 0x2. ath10kcal_patch_mac works for QCA9880/QCA9882 only because the ath10k firmware for these two chips doesn't check the checksum value. (QCA proprietary driver checks this and refuses to use caldata with incorrect checksum.)" This patch updates 11-ath10k-caldata of the ipq40xx target accordingly. Reported-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath10k-firmware: update all CT firmware variantsMichael Yartys2018-12-151-32/+32
| | | | | | | Wave-1 firmware (988x, 9887): bug fixes Wave-2 firmware (4019, 9888, 99x0, 9984): fix protected management frames, rate-ctrl fixes, and performance improvements Signed-off-by: Michael Yartys <michael.yartys@gmail.com>
* ath10k-ct: Update to 2018-12-11 and use version based on 4.19Hauke Mehrtens2018-12-155-24/+583
| | | | | | | | | | This updates the ath10k-ct driver to the version from 2018-12-11 and selects the ath10k-ct version based on kernel 4.19 by default. CONFIG_ATH10K_CE was introduced between kernel 4.16 and 4.19 and is a mandatory option. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* gcc: update to version 7.4.0Hauke Mehrtens2018-12-1526-322/+8
| | | | | | | | This updates the GCC to the next minor release which fixes 178 bugs. The two removed patches are included in gcc 7.4.0 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: netfilter: chain filters merged into nf_tables.koHauke Mehrtens2018-12-153-12/+12
| | | | | | | | | | | | | | | | | | In mainline kernel commit 02c7b25e5f5 ("netfilter: nf_tables: build-in filter chain type") all chain filters were merged into one file and into one kernel module to save some memory. The code protected by these configuration options CONFIG_NF_TABLES_BRIDGE, CONFIG_NF_TABLES_IPV4, CONFIG_NF_TABLES_ARP, CONFIG_NF_TABLES_IPV6, CONFIG_NF_TABLES_NETDEV and CONFIG_NF_TABLES_INET was merged into the nft_chain_filter.c file which is now always compiled into the nf_tables.ko file. This only happened in kernel 4.19 and OpenWrt has to select these as modules in older kennel versions. Mark them as build-in in the kernel 4.19 specific kernel configuration file which will then not be overwritten by the package specific settings which try to make them modular again. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: netfilter: Adapt merge ipv4/ipv6 masquerade codeHauke Mehrtens2018-12-152-4/+4
| | | | | | | | | | | | | | | | In kernel commit 0168e8b361 ("netfilter: nat: merge ipv4/ipv6 masquerade code into main nat module") the CONFIG_NF_NAT_MASQUERADE_IPV4 and CONFIG_NF_NAT_MASQUERADE_IPV6 kernel configuration option were changed to bool and the code will not be compiled as a own module any more, but it will be integrated into nf_nat_ipv4.ko or nf_nat_ipv6.ko to save some memory. Activate these options as bool in the generic kernel 4.19 configuration only, to always build them into the nf_nat_ipv*.ko modules. The kmod file will still try to select them as module, but the generic configuration will not be overwritten. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: netfilter: Add nf_conncount.koHauke Mehrtens2018-12-151-0/+1
| | | | | | | Some kernel modules from kmod-ipt-conntrack-extra depend on nf_conncount.ko, which was added in kernel 4.16, add it to the kmod. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: netfilter: Add nf_tproxy_ipv{4,6} and nf_socket_ipv{4,6}Hauke Mehrtens2018-12-151-0/+4
| | | | | | | | | | The nf_socket.ko module was split in commit 8db4c5be88f ("netfilter: move socket lookup infrastructure to nf_socket_ipv{4,6}.c") into a common, n IPv4 and an IPv6 part. The nf_tproxy.ko module was split in commit 45ca4e0cf27 ("netfilter: Libify xt_TPROXY") into a common, an IPv4 and an IPv6 part. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: netfilter: Add nf_defrag_ipv6.ko to NF_CONNTRACK on 4.19Hauke Mehrtens2018-12-151-1/+2
| | | | | | | | | | | In kernel commit a0ae2562c6c ("netfilter: conntrack: remove l3proto abstraction") The modules nf_conntrack_ipv4.ko, nf_conntrack_ipv6.ko and nf_conntrack.ko were squashed together into one module. This module now depends on nf_defrag_ipv6 when IPv6 support was activated. This is part of the main netfilter packages, so add nf_defrag_ipv6.ko also to the default netfilter packages on kernel 4.19 and later. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>