aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Fix dependency for hostapdWilco Baan Hofman2017-01-261-1/+1
| | | | Signed-off-by: Wilco Baan Hofman <wilco@baanhofman.nl>
* ar71xx: add support to TP-Link Archer C59v1 and C60v1Henryk Heisig2017-01-2616-0/+531
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - 8x LED (controled by 74HC595), 3x button - UART header on PCB TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Currently not working: - Port LAN1 on C59, LAN4 on C60 - WiFi 5GHz (missing ath10k firmware for QCA9886 chip) - Update from oficial web interface ( tplink-saveloader not support "product-info") Flash instruction: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. reset Signed-off-by: Henryk Heisig <hyniu@o2.pl> [Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: QCA956X: add missing registerHenryk Heisig2017-01-266-4/+66
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ar71xx: fix netgear wndr3700 v1/v2, wndr3800/wndr3800ch switch port mappingQian Zheng2017-01-261-2/+5
| | | | Signed-off-by: Qian Zheng <sotux82@gmail.com>
* ar71xx: fix netgear wnr2000 v3 switch port mappingQian Zheng2017-01-261-2/+2
| | | | | | Signed-off-by: Qian Zheng <sotux82@gmail.com> [Jo-Philipp Wich: fix alphabetical order after merging with gl-ar300 case] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: fix tl-wr841n-v7 switch port mappingQian Zheng2017-01-261-1/+5
| | | | | | Signed-off-by: Qian Zheng <sotux82@gmail.com> [Jo-Philipp Wich: fix alphabetical order] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* opkg: clarify messages and errors related to downloadsHannu Nyman2017-01-262-1/+62
| | | | | | | | | | | | | Clarify opkg's messages related to downloads: * more visible error message for package list download failure * separate error message for signature file download error * if wget returns 4, signal the network error more clearly * remove '.' from end of filenames and URLs * try signature check only if the package list was downloaded ok. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* imagebuilder: properly escape single quotes in device titlesJo-Philipp Wich2017-01-261-1/+1
| | | | | | | | | | | | | The name "Plat'Home OpenBlocks AX3" causes the imagebuilders "make info" command to fail with: bash: -c: line 0: syntax error near unexpected token `(' bash: -c: line 0: `echo; [...]' Makefile:99: recipe for target '_call_info' failed Properly escape single quotes to avoid breaking the echo commands. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ath9k: add stability fixes for long standing hang issues (FS#13, #34, #373, ↵Felix Fietkau2017-01-2516-57/+523
| | | | | | | | | | | | | #383) The radio would stop communicating completely. This issue was easiest to trigger on AR913x devices, e.g. the TP-Link TL-WR1043ND, but other hardware was occasionally affected as well. The most critical issue was a race condition in disabling/enabling IRQs between the IRQ handler and the IRQ processing tasklet Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: refresh patchFelix Fietkau2017-01-251-17/+17
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Add video feed to feeds.conf.defaultMirko Vogt2017-01-251-0/+1
| | | | Signed-off-by: Mirko Vogt <mirko-openwrt@nanl.de>
* bcm53xx: disable building Linksys EA6300 V1 imageRafał Miłecki2017-01-251-1/+2
| | | | | | | This device has 2 TRX partitions (main one and failsafe one) and Linux may not detect them properly failing to run userspace. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: update the ethernet compat stringJohn Crispin2017-01-255-6/+6
| | | | | | | mt2701 is an earlier version of the ip core, so use that compat string as baseline. Signed-off-by: John Crispin <john@phrozen.org>
* uboot-lantiq: mark SPL variants as brokenMathias Kresin2017-01-251-0/+5
| | | | | | | | | | | | | | | | | All SPL variants are lzo compressed. The lzop binary is used for compression but is not available in tools. Additionally at least the NAND SPL support is broken and doesn't create working bootloaders. The fb3370 SPI NOR SPL enabled u-boot isn't required for LEDE since the LEDE images are targeting the pre-installed EVA bootloader. Mark these u-boot variants as well as the SPL variants for the reference boards as broken till the lzma issues are fixed upstream and we can use lzma instead of lzo compression. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: fix a tool portability issueFelix Fietkau2017-01-251-3/+3
| | | | | | Use the standard off_t type instead of loff_t Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86: fix sysupgrades on disks with 4k block sizeFelix Fietkau2017-01-251-9/+2
| | | | | | | Even when the disk uses 4k blocks, the partition table still uses units of 512 byte sectors. Always use ibs=512 for the offsets Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: Fix mikrotik subtarget default profile for device profile selectionAlex Samorukov2017-01-251-0/+1
| | | | Signed-off-by: Alex Samorukov <samm@os2.kiev.ua>
* ar71xx: improve Mikrotik hAP Lite device supportAlex Samorukov2017-01-253-4/+5
| | | | | | | | - remove CONFIG_MTD_SPI_NOR_USE_4K_SECTORS - enable jffs2 support - fix sysupgrade Signed-off-by: Alex Samorukov <samm@os2.kiev.ua>
* tools: update kernel2minor to 0.24 versionSergey Sergeev2017-01-254-61/+4
| | | | Signed-off-by: Sergey Sergeev <adron@yapic.net>
* mxs: fix image build issuesFelix Fietkau2017-01-252-5/+9
| | | | | | | stage u-boot images in KERNEL_BUILD_DIR for building images always select uboot-mxs Signed-off-by: Felix Fietkau <nbd@nbd.name>
* u-boot.mk: add support for overriding DEFAULTFelix Fietkau2017-01-251-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* u-boot.mk: add UBOOT_MAKE_FLAGS variable similar to MAKE_FLAGSFelix Fietkau2017-01-251-1/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* brcm47xx: backport arch patch with Luxul devices supportRafał Miłecki2017-01-242-14/+260
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* package-ipkg: Do not fail build without base-filesFlorian Fainelli2017-01-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | If the base-files package is not selected, we will fail executing the very first postinst script: make[3]: Leaving directory `/local/users/fainelli/openwrt/trunk' cp -fpR /local/users/fainelli/openwrt/trunk/build_dir/target-arm_xscale_musl-1.1.15_eabi/root-orion /local/users/fainelli/openwrt/trunk/build_dir/target-arm_xscale_musl-1.1.15_eabi/root.orig-orion ./usr/lib/opkg/info/busybox.postinst: line 3: /local/users/fainelli/openwrt/trunk/build_dir/target-arm_xscale_musl-1.1.15_eabi/root-orion/lib/functions.sh: No such file or directory ./usr/lib/opkg/info/busybox.postinst: line 4: default_postinst: command not found postinst script ./usr/lib/opkg/info/busybox.postinst has failed with exit code 127 make[2]: *** [package/install] Error 1 Check for the existence of lib/functions.sh, and if it does not exist, just bail out gracefully. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* base-files: fix user creation on sysupgrade with few opkg control filesMatthias Schiffer2017-01-241-1/+1
| | | | | | | | | | | If only a single opkg control file exists (which can happen with CONFIG_CLEAN_IPKG), grep would not print the file name by default. Instead of forcing it using -H, we just switch to -l (print only file names) and get rid of the cut. Add -s to suppress an error message when no control files exist. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* include/rootfs.mk: keep Require-User lines with CONFIG_CLEAN_IPKGMatthias Schiffer2017-01-241-1/+9
| | | | | | | | Require-User is handled by /etc/uci-defaults/13_fix_group_user on first boot, so we need to keep these when removing all opkg data with CONFIG_CLEAN_IPKG. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mac80211: brcmfmac: don't use uninitialize mem for country codesRafał Miłecki2017-01-241-2/+2
| | | | | | | There was a bug in brcmfmac patch that could result in treating random memory as source of country codes. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* Add back the commit "ath9k: Add airtime fairness scheduler"Felix Fietkau2017-01-249-15/+728
| | | | | | | | | This reverts commit c296ba834db4ce8c71e0ad7030aab188fe60b27b. According to several reports, the issues with the airtime fairness changes are gone in current versions. It's time to re-apply the patch now. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kirkwood: add ZyXEL NSA310bAlberto Bursi2017-01-249-13/+271
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL NSA310 device is a Kirkwood based NAS: - SoC: Marvell 88F6702 1200Mhz - SDRAM memory: 256MB DDR2 400Mhz - Gigabit ethernet: Realtek (over pcie) - Flash memory: 128MB - 1 Power button - 1 Power LED (blue) - 5 Status LED (green/red) - 1 Copy/Sync button - 1 Reset button - 2 SATA II port (1 internal and 1 external) - 2 USB 2.0 ports (1 front and 1 back) - Smart fan The stock u-boot cannot read ubi so it should be replaced with the LEDE/OpenWRT's u-boot or with a u-boot from here https://github.com/mibodhi/u-boot-kirkwood This device's boot ROM supports "kwboot" tool (in mainline u-boot, built automatically if CONFIG_KIRKWOOD is declared) that sends an uboot image to the board over serial connection, it is very easy to unbrick. The stock bootloader can use usb and read from FAT filesystems, so the installation process is simple, place the uboot file on a USB flashdrive formatted as FAT (here it is "openwrt-kirkwood-nsa310.bin", then connect TTL to the board and write the following commands in the bootloader console: usb reset fatload usb 0 0x1000000 openwrt-kirkwood-nsa310.bin nand write 0x1000000 0x00000 0x100000 reset Now you are rebooting in the new u-boot, write this in its console to install the firmware: usb reset fatload usb 0 0x2000000 lede-kirkwood-nsa310b-squashfs-factory.bin nand erase.part ubi nand write 0x2000000 ubi 0x600000 If your firmware file is bigger than 6 MiBs you should write its size in hex instead of 0x600000 above, or remove that number entirely (it will take a while in this case). If you are using another uboot that can read ubi, set mtdparts like this mtdparts=mtdparts=orion_nand:0x00c0000(uboot),0x80000(uboot_env),0x7ec0000(ubi) And set your bootcmd to be like this bootcmd=run setenv bootargs; ubi part ubi; ubi read 0x800000 kernel; bootm 0x800000 Then you can install the firmware as described above. After you installed (or configured) the u-boot for booting the firmware, write the device's mac address in the ethaddr u-boot env. The MAC address is usually on a sticker under the device (one of the two codes is the serial), it should begin with "107BEF" as it is assigned to ZyXEL. write in the u-boot console (use your MAC address instead of the example) setenv ethaddr 10:7B:EF:00:00:00 saveenv to save the mac address in the u-boot. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* uboot-envtools: add nsa310b envsAlberto Bursi2017-01-241-0/+1
| | | | | | | accessing the u-boot's envs on this device is required to read the mac address. These are the envs of the new u-boot, not of the stock one. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* mvebu: set fan_ctrl.sh only on mambaHans Geiblinger2017-01-242-1/+23
| | | | | Signed-off-by: Hans Geiblinger <cybrnook2002yahoo.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
* uboot-zynq: switch to u-boot.mkFelix Fietkau2017-01-241-98/+17
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-sunxi: clean up, switch to u-boot.mkFelix Fietkau2017-01-244-107/+124
| | | | | | | | Instead of referencing u-boot packages from device profiles and having a -all metapackage, make the u-boot packages hidden (they don't install to bin/ anyway), and name the files in KERNEL_BUILD_DIR appropriately Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-pxa: remove packageFelix Fietkau2017-01-242-104/+0
| | | | | | support for pxa has been gone for a long time now Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-oxnas: switch to u-boot.mkFelix Fietkau2017-01-2429-76/+10
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-omap: switch to u-boot.mkFelix Fietkau2017-01-241-75/+16
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-mxs: switch to u-boot.mkFelix Fietkau2017-01-241-66/+10
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-mvebu: switch to u-boot.mkFelix Fietkau2017-01-244-84/+14
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-layerscape-32b: simplify the package, it does not build anythingFelix Fietkau2017-01-241-64/+16
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-layerscape: switch to u-boot.mkFelix Fietkau2017-01-241-69/+22
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-imx6: switch to u-boot.mkFelix Fietkau2017-01-241-88/+29
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-at91: switch to u-boot.mkFelix Fietkau2017-01-241-71/+11
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-kirkwood: switch to u-boot.mkFelix Fietkau2017-01-241-78/+38
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-ar71xx: switch to using u-boot.mkFelix Fietkau2017-01-2416-82/+19
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-lantiq: switch to using u-boot.mkFelix Fietkau2017-01-241-259/+209
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: add generic build template for u-boot packagesFelix Fietkau2017-01-241-0/+96
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-kirkwood: add uboot for nsa310bAlberto Bursi2017-01-243-9/+745
| | | | | | | | | | | | this commit allows to make a standalone u-boot for nsa310b. While both first-stage and second-stage u-boot work fine if installed to flash or loaded with kwboot, I could not get stock u-boot nor bodhi's u-boot to chainload any second stage u-boot (I also tried with dockstar's uboot that works fine on this device if loaded with kwboot). Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* sdk: explicitely remove ccache directories when packing SDKJo-Philipp Wich2017-01-241-0/+6
| | | | | | | | | | Upon first invocation, the ccache program will create the required directory hierarchy so there is no point in shipping these empty directories. Removing those paths also avoids shipping dangling symlinks in case the directories got linked elsewhere, e.g. into a shared global cache. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: make the touch .autoremove call non-fatalFelix Fietkau2017-01-241-1/+1
| | | | | | | Fixes build issues when there is nothing to do on the compile step (e.g. with unselected packages). Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: remove CPU_TYPE:=mips32r2, it gets overwritten anywayFelix Fietkau2017-01-241-2/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-05 18:54:02 +0000