aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Revert "kernel: ar8327/ar8337: disable ARL access code to avoid lockups ↵Stijn Tintel2017-02-221-6/+0
| | | | | | | | | | | (FS#384)" This reverts commit ec1a695daa7390a6c24e3b28d3956f194cba2cb5. Revert the workaround, the problem was properly fixed in 237454991618e0e8b7ceb8a8a2a43fca12c1a454. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ipq806x: fix fakerootfs positionThomas Reifferscheid2017-02-211-2/+2
| | | | | | | | | | | | The fakeroot header is expected by the netgear bootloader in the last 64 bytes of the last block used by the uImage. With the current linux-4.9 uImage being more than 128k smaller than the linux-4.4 uImage the bootloader was unable to locate the rootfs ih_magic and was refusing to load and start the kernel. Fixes: FS#542 Signed-off-by: Thomas Reifferscheid <thomas@reifferscheid.org>
* build: skip opkg host dependency within the SDKFelix Fietkau2017-02-211-1/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* archs38: only calculate entry point address when necessaryFelix Fietkau2017-02-211-5/+2
| | | | | | | $(eval) runs even during prereq check, which can cause bogus error messages Signed-off-by: Felix Fietkau <nbd@nbd.name>
* arc770: only calculate entry point address when necessaryFelix Fietkau2017-02-211-5/+2
| | | | | | | $(eval) runs even during prereq check, which can cause bogus error messages Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ubox: update to the latest versionFelix Fietkau2017-02-211-3/+3
| | | | | | | | c553354 cmake: fix typo 8973576 kmodloader: fix not being able to find some modules fce9382 cmake: Check for getrandom system call Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86_64: Add support for EFI framebuffer (FS#515)Alif M. Ahmad2017-02-211-1/+2
| | | | | | | | | | | | | | | CONFIG_FB_EFI and CONFIG_FB_SIMPLE are needed to display console text on EFI framebuffer. CONFIG_FB_EFI is needed when the kernel is directly launched via EFI shell or EFI startup.nsh script. CONFIG_FB_SIMPLE is needed when launching the kernel via grub2 efi. In this case, grub2 has prepared a gfxterm framebuffer and the kernel just need to use the already prepared grub's gfxterm framebuffer to display console text. Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
* px5g: replace px5g-standalone with a statically linked variant of px5g-mbedtlsFelix Fietkau2017-02-2118-8017/+22
| | | | | | | | px5g-standalone only supports SHA1 for certificates, which is strongly deprecated. The new px5g-standalone is about 27k bigger (compressed), and has identical behavior to px5g-mbedtls (it uses SHA256). Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mbedtls: add --function-sections and --data-sections to CFLAGSFelix Fietkau2017-02-211-0/+2
| | | | | | | This allows binaries that links these libraries statically to be reduced by using --gc-sections on link Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: move opkg host dependency from package/install to package/compileFelix Fietkau2017-02-211-1/+3
| | | | | | | Improves parallel build behavior, since it allows opkg to be built at the same time as other packages Signed-off-by: Felix Fietkau <nbd@nbd.name>
* cmake: skip build system check on compileFelix Fietkau2017-02-211-0/+4
| | | | | | | | | | | | | cmake checks the build system and its variables on its own to detect if the makefiles need to be regenerated. Unfortunately this can invalidate overrides passed in the Build/Configure step. On non-Linux systems this breaks the build when switching between targets of the same package architecture. Fix this by forcibly disabling the build system check and relying on the LEDE build system to take care of these things Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: allow building an individual subdir without dependencies using NO_DEPS=1Felix Fietkau2017-02-211-2/+2
| | | | | | | QUILT=1 had the same effect, but it is sometimes useful to be able to do this without quilt Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts/feeds: Reuse TOPDIR if defined in environmentMichal Sojka2017-02-211-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The feeds script sets value of TOPDIR in a way that is inconsistent with how toplevel Makefile sets it. The inconsistency manifests when I use a "build directory" with symlinks to LEDE source (see below). When make is invoked in such a directory, make's TOPDIR variable is set to that directory, whereas scripts/feeds sets TOPDIR to the top of LEDE source, which results in creating feeds directory inside the LEDE source instead of in the build directory. This patch changes the script so that it reuses the TOPDIR value form the environment if it exists. The result is that 'make package/symlinks' correctly fetches feeds to the build directory instead in the source. I use the following commands to create the build directory: ln -s $SRC/config config ln -s $SRC/Config.in Config.in ln -s $SRC/feeds.conf.default feeds.conf.default ln -s $SRC/include include ln -s $SRC/Makefile Makefile mkdir package ln -s $SRC/package/base-files package/base-files ln -s $SRC/package/boot package/boot ln -s $SRC/package/devel package/devel ln -s $SRC/package/firmware package/firmware ln -s $SRC/package/kernel package/kernel ln -s $SRC/package/libs package/libs ln -s $SRC/package/Makefile package/Makefile ln -s $SRC/package/network package/network ln -s $SRC/package/system package/system ln -s $SRC/package/utils package/utils ln -s $SRC/rules.mk rules.mk ln -s $SRC/scripts scripts ln -s $SRC/target target ln -s $SRC/toolchain toolchain ln -s $SRC/tools tools This allows me to easily test changes in LEDE on multiple targets. Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
* opkg: re-enable usign supportJo-Philipp Wich2017-02-201-2/+2
| | | | | | | | | The switch to cmake caused the -DHAVE_USIGN flag to get lost, disabling compilation of the correspondinf support code. Update to latest Git head which enables usign support by default. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "px5g-standalone: provide px5g via PROVIDES"Stijn Tintel2017-02-201-1/+0
| | | | | | | | | | | | This reverts commit cc66f819b4e778732a32f08f5dc39a2554682b73. This commit causes opkg to install px5g-standalone instead of px5g when installing luci-ssl. As luci-ssl depends on mbedtls, using px5g-standalone makes no sense. Next to that, it creates deprecated SHA1 certificates. Revert the commit to avoid pxg5-standalone to be installed by accident. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* libubox: fix host build on macOSFelix Fietkau2017-02-201-7/+0
| | | | | | Use the defaults instead of a custom non-portable Host/Install section Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: add kernel 4.9 configRafał Miłecki2017-02-201-0/+335
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* hostapd: fix feature indicationJo-Philipp Wich2017-02-201-2/+14
| | | | | | | | - Fix eap test to work with standalone hostapd builds - Fix 11n test to check the correct define - Add 11ac, 11r and 11w tests Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* dnsmasq: bump to dnsmasq v2.77test3Kevin Darbyshire-Bryant2017-02-205-131/+217
| | | | | | | | | | | | | | | | New test release (since test1) includes 2 LEDE patches that are upstream and may be dropped, along with many spelling fixes. Add forthcoming 2017 root zone trust anchor to trust-anchors.conf. Backport 2 patches that just missed test3: Reduce logspam of those domains handled locally 'local addresses only' Implement RFC-6842 (Client-ids in DHCP replies) Compile & run tested Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* ar71xx: fix vlan settings for some boardsWeijie Gao2017-02-201-1/+1
| | | | | | | | | | | For AR71XX devices, GMAC1 always connects port 0 of the built-in switch, as the CPU port. This patch sets correct vlan for some devices with wrong settings: a) mark port 0 as CPU port, tagged b) reverse port order, marking these ports untagged Signed-off-by: Weijie Gao <hackpascal@gmail.com>
* ar71xx: Add more boards to the routerboard serial detection patchThibaut VARENE2017-02-201-1/+3
| | | | | | This patch enables serial console on the 435 series and the 953gs. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* kernel: add Chinese codepagesHsing-Wang Liao2017-02-201-0/+32
| | | | Signed-off-by: Hsing-Wang Liao <kuoruan@gmail.com>
* uboot-omap: Update to u-boot v2017.01Alexandru Gagniuc2017-02-204-57/+2
| | | | | | | | | | | | Specifying USE_PRIVATE_LIBGCC is no longer needed, as it is the default. Patch 001 is removed, since it was already merged upstream. Patches 100 and 101 are removed because they do not appear to be needed anymore, and they do not conform with the sign-off and commit message procedures. Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
* uboot-omap: Do not hide bootloader packagesAlexandru Gagniuc2017-02-201-1/+0
| | | | | | | | | | | | | Because they were hidden, there was no way to disable the uboot targets in menuconfig, so they had to be built every time. The omap target is the only one to hide uboot packages. To be consistent with the other targets, and have more control over the build, un-hide the u-boot packages. Note that the default behavior remains unchanged, as uboot will be built unless explicitly disabled. Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
* ar71xx: add support for TL-WR802N Version 2Thomas Roberts2017-02-2012-2/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the TP-Link TL-WR802N Version 2. Specification: - SoC: Qualcomm Atheros QCA9533 (560 MHz, MIPS 24Kc) - RAM: 32 MiB - Storage: 4 MiB of FLash on board - Wireless: Built into QCA9533 (Honey Bee), PHY modes b/g/n - Ethernet: 1x100M (port0) Installation through OEM Web Interface: - Connect to TL-WR802N by Ethernet or Wi-Fi - Go to http://192.168.0.1 (default user is "admin" & password is "admin) - Go to "System Tools -> Firmware Upgrade" - Browse for firmware "*.factory-us.bin" or "*.factory-eu.bin" for eu model - Click upgrade Installation through tftp: Note: T_OUT, T_IN and GND on the board must be connected to USB TTL Serial Configuration 115200 8n1 - Boot the TL-WR802N - When "Autobooting in 1 seconds" appears type "tpl" followed by enter - Connect to the board Ethernet port (IPADDR: 192.168.1.1, ServerIP: 192.168.1.10) - tftpboot 0x80000000 <Firmware Image Name> - Record the result of "printenv bootcmd" - Enter "erase <Result of 'printenv bootcmd'> +0x3c0000" (e.g erase 0x9f020000 +0x3c0000) - Enter "cp.b 0x80000000 <Result of 'printenv bootcmd'> 0x3c0000" (e.g cp.b 0x80000000 0x9f020000 0x3c0000) - Enter "bootm <Result of 'printenv bootcmd'>" (e.g bootm 0x9f020000) Signed-off-by: Thomas Roberts <tom.p.roberts@gmail.com>
* sdk: emit proper tag references for base URLsJo-Philipp Wich2017-02-191-3/+5
| | | | | | | | | Properly resolve symbolic tag names when constructing the base feed Git url and avoid emitting "HEAD" references when building from detached commits. Fixes #495, #501. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* opkg: switch to own fork to improve memory usageJo-Philipp Wich2017-02-1930-3495/+24
| | | | | | | | | | Switch to our own fork of opkg to significantly reduce the required amount of memory when updating lists or installing packages. Preliminary tests showed a usage drop of about 90% during these operations, from ~3.7MB with unmodified opkg to ~360KB with our custom fork. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* libubox: add host buildJo-Philipp Wich2017-02-191-0/+14
| | | | | | Our opkg fork requires libubox to build, so add a host build for it. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* firewall3: update to Git head to support xtables API level > 11Jo-Philipp Wich2017-02-191-3/+3
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* gen-dependencies.sh: fix handling variations in "file" outputFelix Fietkau2017-02-191-1/+1
| | | | | | On some systems, file adds ", with debug info" after "not stripped" Signed-off-by: Felix Fietkau <nbd@nbd.name>
* rstrip.sh: fix handling variations in "file" outputFelix Fietkau2017-02-191-1/+1
| | | | | | On some systems, file adds ", with debug info" after "not stripped" Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: fix warning if ltq_atm modules are missingMathias Kresin2017-02-181-2/+1
| | | | | | | | | Fixes the following warning on first boot if the ltq_atm modules are not included in the image: ls: /lib/modules/4.4.49/ltq_atm*: No such file or directory Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: set the internet led interface according to wan interfaceMathias Kresin2017-02-181-0/+1
| | | | | | | | Use the nas0 interface for the netdev trigger as default. Use the ptm0 interface for xRX200 boards to match the default wan interface set in 02_network. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: introduce lantiq_is_vdsl_systemMathias Kresin2017-02-182-1/+5
| | | | | | | Move the code to check if the current system is a system with vdsl support to a dedicate function to make it reusable. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix ARV7519RW22 switch port indexingMathias Kresin2017-02-181-1/+1
| | | | | | Fixes FS#454. Signed-off-by: Mathias Kresin <dev@kresin.me>
* odhcp6c: fix PKG_MIRROR_HASHHans Dedecker2017-02-171-1/+1
| | | | Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uhttpd: use sha256 when generating certificates with openssl (FS#512)Felix Fietkau2017-02-171-1/+1
| | | | | | Patch from attachment to FS#512 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libpcap: remove feature dependencies on kmod-* packagesFelix Fietkau2017-02-171-2/+0
| | | | | | USB support could be built into the kernel as well Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dropbear: bump PKG_RELEASEStijn Tintel2017-02-171-1/+1
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ar71xx: fix ethernet PLL configuration for QCA956xFelix Fietkau2017-02-171-1/+1
| | | | | | | QCA956x is configured like AR934x, not like the older chips. Should fix ethernet hangs when using the WAN port without SGMII Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix lan ports on archer C59 and C60Henryk Heisig2017-02-174-14/+39
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* x86: Set default baud rate on Geode images to 115200David Woodhouse2017-02-171-1/+0
| | | | | | | | | | | Prior to commit 1496b95a0 ("x86: clean up default grub baudrate settings") we had three different baud rates for the Geode targets: 19200 for net5501, 38400 for alix2, and 115200 for Geos. It doesn't seem that there's a very good reason for varying from our default 115200 baud, so let's make the Geode target do that instead. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* x86: Add Geos profile for Geode subtargetDavid Woodhouse2017-02-173-0/+44
| | | | | | | | | | This makes the Geode images actually useful again. The Geos profile should include the relevant hardware for that board, and the Default profile adds the via-rhine adapter which seems to have been present in the net5501 and alix targets killed in commit 9e0759ea265 ("x86: merge all geode based subtargets into one"). Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* ar71xx: add support for 8devices Lima boardKarol Dudek2017-02-1710-0/+117
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Lima is a module for the (IoE) internet of everything applications, based on Qualcomm/Atheros QCA4531. Specification: - 650/600/216 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 32 MB of FLASH - 2T2R 2.4 GHz - 2x 10/100 Mbps Ethernet - USB 2.0 Host - PCIe - UART for serial console - 14x GPIO Flash instruction: 1. Download lede-ar71xx-generic-lima-squashfs-sysupgrade.bin and rename it to 8dev_recovery.bin 2. Binary file copy to USB stick and plug into slot USB 3. Press S2 (reset) button 4. Press and hold the S1 button by 5 seconds 5. Wait ~40 seconds to complete recovery Tested on: - Lima development kit Signed-off-by: Karol Dudek <karoiz@sli.pl>
* mediatek: add more missing symbolsJohn Crispin2017-02-162-0/+4
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: add v4.9 supportJohn Crispin2017-02-1650-0/+11894
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mediatek: add config file for v4.9John Crispin2017-02-161-0/+435
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mvebu: add linux 4.9 supportFelix Fietkau2017-02-1662-1/+9799
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ar8216: flush ARL table during reset after init_globalsGünther Kelleter2017-02-161-0/+1
| | | | | | | | | | commit 33b72b8e0faf7a39faabece584fd6da61cd8f8df "ar8216: adjust ATU flushing in case of link changes" introduced portwise flushing on link down events. Now the ARL table could be in a chaotic state after boot where ar8xxx_sw_get_arl_table looped forever (depending on the entries collected while booting). Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
* mediatek: bump to v4.9John Crispin2017-02-16110-27215/+136
| | | | Signed-off-by: John Crispin <john@phrozen.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-07 00:14:33 +0000