aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* base-files: fix feed list in PKG_CONFIG_DEPENDSMatthias Schiffer2018-07-121-1/+1
| | | | | | | | FEEDS_ENABLED and FEEDS_DISABLED are derived from FEEDS_AVAILABLE, not FEEDS_INSTALLED. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit 6dac434c0011524b9ac01725727faa1a19ea4a48)
* include/feeds.mk: always add available feeds to PACKAGE_SUBDIRSMatthias Schiffer2018-07-121-5/+1
| | | | | | | | | | | | | | | | Setting CONFIG_FEED_... symbols combined two different effects: Disabling a feed in the generated opkg distfeeds.conf, and omitting the feed from PACKAGE_SUBDIRS. It does not make sense to omit built feeds from PACKAGE_SUBDIRS, as it will only lead to packages that can be enabled in .config (and that will consequently be built) not to be found during rootfs creation, breaking the build. All feeds that packages are emitted to should simply always be added to PACKAGE_SUBDIRS instead; the CONFIG_FEED_... only configure the generated distfeeds.conf like this. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit 9af22f1ac9122b54700dd38f627fdd446e1109f4)
* scripts/feeds: add src-dummy methodMatthias Schiffer2018-07-121-1/+6
| | | | | | | | | | The src-dummy method does not actually obtain any feed, but it can be used to insert addtional entries into the opkg distfeeds.conf. This is useful to make package feeds available to users without requiring the corresponding source feeds to be available during build. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit 6bdd5d8459cca7ceb93c841cccf61dc7ce830092)
* ramips: TP-Link TL-WR902AC v3: add missing wps buttonPeter Lundkvist2018-07-121-1/+7
| | | | Signed-off-by: Peter Lundkvist <peter.lundkvist@gmail.com>
* ramips: TP-Link TL-WR902AC v3: don't build factory imagePeter Lundkvist2018-07-121-1/+0
| | | | | | | | | | | | | | | | | | | | | The line that produces factory image was accidentally left by me while testing before inital commit. I came to the conclusion that flashing from OEM firmware does not work (seems to share this behavior with other tplinks based on mt7628). I have not done any further analysis, as I was unable to open the case and attach a serial port (too much glue). Maybe i will try once more. So the way to do initial flashing (or un-bricking) is to use the tftp-recover image. It is possible to revert to OEM firmware with tftp recovery; in this case the first 512 bytes the image file need to be cut off. Signed-off-by: Peter Lundkvist <peter.lundkvist@gmail.com> [add explaination provided via mail as commit message] Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: bump 4.14 to 4.14.54 for 18.06Koen Vandeputte2018-07-1228-285/+285
| | | | | | | | | | | | Refreshed all patches Reworked patches to match upstream: 335-v4.16-netfilter-nf_tables-add-single-table-list-for-all-fa.patch Compile-tested on: cns3xxx, imx6, x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.111 for 18.06Koen Vandeputte2018-07-126-169/+191
| | | | | | | | | Refreshed all patches Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mac80211: Expose support for ath9k DynackKoen Vandeputte2018-07-121-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enables support for Dynack feature. When a remote station is far away, we need to compensate for the distance by allowing more time for an ACK to arrive back before issueing a retransmission. Currently, it needs to be set fixed to indicate the maximum distance the remote station will ever be. While this mostly works for static antennae, it introduces 2 issues: - If the actual distance is less, speed is reduced due to a lot of wates wait-time - If the distance becomes greater, retries start to occur and comms can get lost. Allowing to set it dynamically using dynack ensures the best possible tradeoff between speed vs distance. This feature is currently only supported in ath9k. it is also disabled by default. Enabling it can be done in 2 ways: - issue cmd: iw phy0 set distance auto - sending the NL80211_ATTR_WIPHY_DYN_ACK flag to mac80211 driver using netlink Disabling it can be done by providing a valid fixed value. To give an idea of a practical example: In my usecase, we have mesh wifi device installed on ships/platforms. Currently, the coverage class is set at 12000m fixed. When a vessel moved closer (ex. 1500m), the measured link capacity was a lot lower compared to setting the coverage class fixed to 1500m Dynack completely solved this, nearly providing double the bandwidth at closer range compared to the fixed setting of 12000m being used. Also when a vessel sailed to a distance greater than the fixed setting, communication was lost as the ACK's never arrived within the max allowed timeframe. Actual distance: 6010m iperf 60s run avg Fixed 12150m: 31 Mbit/s Dynack: 58 Mbit/s Fixed 6300m: 51 Mbit/s Dynack: 59 Mbit/s Fixed 3000m: 13 Mbit/s (lots of retries) Dynack: 58 Mbit/s Actual distance: 1504m iperf 60s run avg Fixed 12150m: 31 Mbit/s Dynack: 86 Mbit/s Fixed 6300m: 55 Mbit/s Dynack: 87 Mbit/s Fixed 3000m: 67 Mbit/s Dynack: 87 Mbit/s Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bcm47xxpart: fix getting user-space data partition nameRafał Miłecki2018-07-102-2/+4
| | | | | | | | | | | | Partition name is picked by a parser_trx_data_part_name(). It has to get correct partition offset (taking care of bad blocks) to work properly. This fixes UBI support for devices that have kernel flashed on partition with a bad block. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 7ddba08d873a0ce6d2d32b8f6a1bea550107ca44)
* mac80211: initialize sinfo in cfg80211_get_stationSven Eckelmann2018-07-081-0/+42
| | | | | | | | | | | | | | | | | | | | Most of the implementations behind cfg80211_get_station will not initialize sinfo to zero before manipulating it. For example, the member "filled", which indicates the filled in parts of this struct, is often only modified by enabling certain bits in the bitfield while keeping the remaining bits in their original state. A caller without a preinitialized sinfo.filled can then no longer decide which parts of sinfo were filled in by cfg80211_get_station (or actually the underlying implementations). cfg80211_get_station must therefore take care that sinfo is initialized to zero. Otherwise, the caller may tries to read information which was not filled in and which must therefore also be considered uninitialized. In batadv_v_elp_get_throughput's case, an invalid "random" expected throughput may be stored for this neighbor and thus the B.A.T.M.A.N V algorithm may switch to non-optimal neighbors for certain destinations. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> (cherry picked from commit 87493dac11f3c7bbbc1fed9aef1cf9ff62053ab0)
* ath10k-ct: search DT for BDF variant infoSven Eckelmann2018-07-083-1/+363
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Board Data File (BDF) is loaded upon driver boot-up procedure. The right board data file is identified on QCA4019 using bus, bmi-chip-id and bmi-board-id. The problem, however, can occur when the (default) board data file cannot fulfill the vendor requirements and it is necessary to use a different board data file. This problem was solved for SMBIOS by adding a special SMBIOS type 0xF8. Something similar has to be provided for systems without SMBIOS but with device trees. No solution was specified by QCA and therefore a new one has to be found for ath10k. The device tree requires addition strings to define the variant name wifi@a000000 { status = "okay"; qcom,ath10k-calibration-variant = "RT-AC58U"; }; wifi@a800000 { status = "okay"; qcom,ath10k-calibration-variant = "RT-AC58U"; }; This would create the boarddata identifiers for the board-2.bin search * bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=RT-AC58U * bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=RT-AC58U Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> (cherry picked from commit 1c01e02575bd2af96741ba79ed12004fdfb15544)
* wireguard: bump to 0.0.20180625Kevin Darbyshire-Bryant2018-07-071-2/+2
| | | | | | | | | | | | | | | | | | | | | dfd9827 version: bump snapshot 88729f0 wg-quick: android: prevent outgoing handshake packets from being dropped 1bb9daf compat: more robust ktime backport 68441fb global: use fast boottime instead of normal boottime d0bd6dc global: use ktime boottime instead of jiffies 18822b8 tools: fix misspelling of strchrnul in comment 0f8718b manpages: eliminate whitespace at the end of the line 590c410 global: fix a few typos bb76804 simd: add missing header 7e88174 poly1305: give linker the correct constant data section size fd8dfd3 main: test poly1305 before chacha20poly1305 c754c59 receive: don't toggle bh Compile-tested-for: ath79 Archer C7 v2 Run-tested-on: ath79 Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 3ce11588f6346ebedde68ef30a06e01999e292bb)
* kmod-sched-cake: bump to latest 20180706Kevin Darbyshire-Bryant2018-07-071-3/+3
| | | | | | | | Fixes a potential infinite loop bug when in unlimited (ie not using built in shaper) mode. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 4bd4ece9eafbcde62d1e6efc4cf820f05906dd28)
* kmod-sched-cake: bump to latest cakeKevin Darbyshire-Bryant2018-07-071-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This bumps to the latest & possibly greatest cake, sadly it's still inedible but from an SQM point of view quite tasty :-) Main tweaks since previous bump, improved ack_filter, some extra stats, support for 64bit netlink parameters (higher rates/byte counters) 0520a6c Fix NAT option handling 8da93e1 Make sure we always call qdisc_watchdog_init() in cake_init() f65daf6 Fix mismatched parenthesis 51d4ab3 Change flag handling to be safe even when mixing with non-eligible ACKs f2ea091 ack_filter: protect DCTCP with stricter filtering of ECE marks 28b4560 ACK filter: Handle wrapping sequence numbers and DSACKs 73f62d9 Use the right PAD attribute for options 5969c14 Use 32 for tin backlog e289f31 Move all the u64 netlink attributes together 36180a0 Check ACK seqno before parsing SACKs 91bbc01 Merge branch 'mine' into cobalt 58c55ec Rework SACK check to compare the ranges of two SACKs 9a5d593 ack_filter: Add proper handling of SACKs eca95d4 ack_filter: short-circuit TCP flag check d50a246 compat: backport some ktime functions 7b7ad11 compat: define tcpopt_fastopen for pre-4.1 kernels ca54cdb Fix ktime compare 9d7dcc0 ack filter: Parse TCP options and only drop safe ones b119882 Return EOPNOTSUPP on NAT option if conntrack is not available 842d7f0 Don't try to pad stats with tin_stats padding bd46dc2 Use 64-bit divide helper 8e41bf0 Make sure we never drop SACKs when filtering ACKs 66e5d60 Avoid comparing ktime_t to scalar values 7fab017 Actually commit the ktime_t changes fca6d13 Switch to ktime_t and get rid of cobalt.h 6f7e5af Can't use do_div with 64-bit divisors Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit abeae38dbbe8b7fda10ad36fb5db57ed16c93479)
* iproute2: tc: update support for cakeKevin Darbyshire-Bryant2018-07-071-28/+83
| | | | | | | | | | Bump iproute2/tc support of cake. Add support for cake's change to u64 attribute passing for certain attributes (rate & byte counts) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit a2165f936e94ed71dff5fdbf0fbc58c88fb17158)
* ipq806x: fix numbering for Netgear R7800 LAN portsAleksandr V. Piskunov2018-07-041-5/+5
| | | | | | | | | | Netgear R7800 switch LAN ports are numbered backwards in LuCI, i.e. numbering is not corresponding to the actual physical port labels, patch fixes that. Signed-off-by: Aleksandr V. Piskunov <aleksandr.v.piskunov@gmail.com> [merged with existing board using the same config] Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* lantiq: backport stp-xway get callback implementationMathias Kresin2018-07-032-0/+94
| | | | | | | | | | | To keep the status of a LED connected to the stp during boot, the get callback is required. If the callback is missing and the LED default state is set to keep in the devicetree, the gpio led driver errors out during load. Fixes: FS#1620 Signed-off-by: Mathias Kresin <dev@kresin.me>
* build: fix target metadata scan dependenciesFelix Fietkau2018-07-033-4/+10
| | | | | | | Move SCAN_DEPS to scan.mk to eliminate redundancy with scripts/feeds Add image/*.mk to SCAN_DEPS for targets to pick up newly added devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: ensure that iwinfo is selected when building for multiple devicesFelix Fietkau2018-07-031-0/+1
| | | | | | | extra_packages needs to be added there, like on profiles and target packages lists Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: limit dictionary size for lzma compressionFelix Fietkau2018-07-031-1/+1
| | | | | | | | | | | | In some cases, recent builds fail to boot from flash with at least some MT7621 based devices. The error message is: "LZMA ERROR 1 - must RESET board to recover" Booting the same kernel via TFTP works for some reason. Through testing I figured out that limiting the LZMA dictionary size seems to prevent these errors Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 4.14 to 4.14.52 for 18.06Stijn Segers2018-07-02147-1694/+912
| | | | | | | Compile-tested on: ramips/mt7621, x86/64. Run-tested on: ramips/mt7621. Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* kernel: bump 4.9 to 4.9.110 for 18.06Stijn Segers2018-07-026-201/+179
| | | | | | Compile-tested on ar71xx. Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* ramips: move mt7620n i2c_pins definition to right placeAndrey Jr. Melnikov2018-06-271-7/+7
| | | | | | | | | | Move to i2c pins pinmux node to the pinctrl node. Fixes: a0685deec458 ("ramips: Add i2c support for mt7620n") Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com> [fix commit message] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq806x: remove "firmware" partition definition from netgear routersHannu Nyman2018-06-274-20/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the "firmware" partition definition from the DTS of R7800 to fix sysupgrade. Commit 4645a6d3 defined CONFIG_MTD_SPLIT_UIMAGE_FW=y for ipq806x and that causes mtd to misbehave as additional kernel and ubi partitions are detected from inside the "firmware" partition. [ 1.111324] 0x000001480000-0x000001880000 : "kernel" [ 1.121005] 0x000001880000-0x000007900000 : "ubi" [ 1.283912] 0x000007900000-0x000008000000 : "reserve" [ 1.296407] 0x000001480000-0x000007900000 : "firmware" [ 1.468043] no rootfs found after FIT image in "firmware" [ 2.426860] 2 uimage-fw partitions found on MTD device firmware [ 2.426931] 0x000001480000-0x000001880000 : "kernel" [ 2.440420] 0x000001880000-0x000007900000 : "ubi" Both kernel and ubi are already defined in DTS, so this duplication leads into errors in sysupgrade: Writing from <stdin> to kernel ... ubiattach: error!: strtoul: unable to parse the number '6 mtd10' ubiattach: error!: bad MTD device number: "6 mtd10" The partition is defined to same area as kernel+ubi, and is not needed for sysupgrade anymore. Remove it to fix things. Only tested for the R7800 but all of them should behave equal. Fixes: FS#1617 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> [squashed commits, add "tested on" note] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq806x: Enlarge R7800 flash - use netgear partitionHannu Nyman2018-06-271-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Increase the available flash memory size in Netgear R7800 by taking into the use the unused "netgear" partition that is located after the firmware partition. Available flash space for kernel+rootfs+overlay increases by 68 MB from 32 MB to 100 MB. In a typical build, overlay space increases from 15 to 85, increasing the package installation possibilities greatly. Reverting to the OEM firmware is still possible, as the OEM firmware contains logic to initialise the "netgear" partition if its contents do not match expectations. In OEM firmware, "netgear" contains 6 UBI sub-partitions that are defined in /etc/netgear.cfg and initialisation is done by /etc/preinit Tested with Openwrt master r7093-4fdc6ca31b and OEM V1.0.2.52 Reference to forum discussion in Netgear R7800 exploration thread: https://forum.lede-project.org/t/netgear-r7800-exploration-ipq8065-qca9984/285/1118 (messages 1118-1158) Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* ramips: add switch port index for I-O DATA WN-GX300GRINAGAKI Hiroshi2018-06-271-2/+2
| | | | | | | | | | | WN-GX300GR has 5x RJ45 ports (port 0-4), and these ports are orderd on the device as follows: 4 3 2 1 0 1-4: lan 0: wan Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* uboot-kirkwood: fix malformed boot configurationAlberto Bursi2018-06-268-8/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With current uboot default configuration the bootloader will fail to start the OpenWrt firmware with the following error: ----- unexpected character 'b' at the end of partition Error initializing mtdparts! incorrect device type in ubi Partition ubi not found! Error, no UBI device/partition selected! Wrong Image Format for bootm command Error occured, error code = 112 ----- If the uboot configuration is examined with printenv I can see that mdtparts line (on a nsa310) is wrong: ----- mtdparts=mtdparts=orion_nand:0x0c0000(uboot), 0x80000(uboot_env),0x7ec0000(ubi)bootargs_root= ---- The "bootargs_root=" that was appended to it should not be there. Fix the issue by adding a \0 line terminator at the end of affected lines, mimicking what is also done by uboot upstream. This issue was detected and confirmed on a nsa310, nsa325 and a pogoplug v4, but it's not hardware-specific, so apply the same fix to other devices as well. Note that the issue is with the uboot's integrated boot configuration, which is not used unless the uboot configuration in flash is unavailable (erased or corrupted), which happens only on first time installation, or if the user deletes the uboot configuration when upgrading uboot. People just upgrading from an older uboot without erasing their previous uboot configuration stored in flash would not have noticed this issue. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* mac80211: make rtl8xxxu build againJohn Crispin2018-06-261-0/+38
| | | | | | | we only wanted to drop rtl8xxxue support Signed-off-by: John Crispin <john@phrozen.org> (cherry picked from commit d8981133b27e7deebc79dc5fc51beb06b3b0a221)
* mac80211: rtl8xxxu: drop support patchesJohn Crispin2018-06-2658-3569/+0
| | | | | | | | | | After a very enlightening but unfortunately far too short exchange with Jes we mutually agreed to drop the patches. They are unfortunately not ready yet. Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: John Crispin <john@phrozen.org> (cherry picked from commit 66c5696cdf9599ccef652a651f52c0f7f53da44a)
* base-files: fix links in banner.failsafeSven Roederer2018-06-241-1/+3
| | | | | | | Update the link to the current section in the documentaion wiki. This fixes https://github.com/openwrt/packages/issues/6282 Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>
* musl: sys/socket.h: fix SO_PEERSEC value on MIPSMatthias Schiffer2018-06-241-0/+59
| | | | | | | | | | | Differing from all other archs supported by musl, MIPS defines SO_PEERSEC to 30 instead of 31. Patch has also been submitted upstream. Reported-by: Andrey Jr. Mlenikov <temnota.am@gmail.com> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit 4b50854a60fce73aa83b50c445ea93970322d442)
* ar71xx: Add support for TP-Link CPE210 v2Adrian Schmutzler2018-06-237-11/+143
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This PR adds support for a popular low-cost 2.4GHz N based AP Specifications: - SoC: Qualcomm Atheros QCA9533 (650MHz) - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 2.4GHz N based built into SoC 2x2 - Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Notes: TP-Link does not use bootstrap registers so without this patch reference clock detects as 40MHz while it is actually 25MHz. This is due to messed up bootstrap resistor configuration on the PCB. Provided GPL code just forces 25MHz reference clock. That causes booting with completely wrong clocks, for example, CPU tries to boot at 1040MHz while the stock is 650MHz. So this PR depends on PR #672 to remove 40MHz reference clock. Thanks to Sven Eckelmann <sven@narfation.org> for properly patching that. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 5c5bf8b8658a588423f6ec445d7ef6a36f99a396)
* ar71xx: Add TP-Link Pharos v2 board detectionAdrian Schmutzler2018-06-232-14/+33
| | | | | | | | | | | Add support for detecting TP-Link Pharos v2 boards. They use different format in product-info partition than v1 boards. Code was written mostly by Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 2524febf7927a1bf430d64b7790feb126023e3d1)
* mac80211: backport brcmfmac changes from kernel 4.18Rafał Miłecki2018-06-2311-0/+631
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit c446e38c862201dd4d6a4fb8ea6e49172980952d)
* mac80211: backport brcmfmac firmware & clm_blob loading reworkRafał Miłecki2018-06-238-41/+1392
| | | | | | | It backports remaining brcmfmac changes from 4.17. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 7e8eb7f309a802ba10a13ddb807c6a31fecc9183)
* mac80211: backport brcmfmac data structure reworkRafał Miłecki2018-06-2310-9/+1426
| | | | | | | It backports brcmfmac commits from kernel 4.17. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 3c8bb92655c68a07abf5358ef23eb98422ed8d6d)
* mac80211: backport "brcmfmac: cleanup and some rework" from 4.17Rafał Miłecki2018-06-239-1/+772
| | | | | | | | | | | | It was described by Arend as: > This series is intended for 4.17 and includes following: > > * rework bus layer attach code. > * remove duplicate variable declaration. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 0da9303e5b444e2c98c24719c48c09f4c976c5a7)
* bcm53xx: fix NAND partitions on D-Link DIR-885LRafał Miłecki2018-06-231-0/+39
| | | | | | | | | | | This fixes missing rootfs on above device: [ 2.652292] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 (...) [ 2.687909] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) Fixes: 05cb6aa69f66 ("bcm53xx: replace linux,part-probe with a proper partitions subnode") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit e53d0da775082ee5d1d18949b00850590cf81650)
* build: change version.mk defaults to OpenWrtJo-Philipp Wich2018-06-221-2/+2
| | | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io> (backported from commit 333e609703ff40a272b8f8832a8af682826fb572)
* OpenWrt v18.06.0-rc1: revert to branch defaultsJo-Philipp Wich2018-06-225-11/+9
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* OpenWrt v18.06.0-rc1: adjust config defaultsv18.06.0-rc1Jo-Philipp Wich2018-06-225-9/+11
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "LEDE v18.06.0-rc1: adjust config defaults"Jo-Philipp Wich2018-06-225-10/+8
| | | | | | | This reverts commit 97b1765a45499ecc56db44f79453d3c6040bb5e7. The tree is in an inconsistent state and we need to complete some rebranding. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "LEDE v18.06.0-rc1: revert to branch defaults"Jo-Philipp Wich2018-06-225-8/+10
| | | | | | | This reverts commit 55df39e684f8fde90c52212350062440dc6c9754. The tree is in an inconsistent state and we need to complete some rebranding. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* LEDE v18.06.0-rc1: revert to branch defaultsJo-Philipp Wich2018-06-225-10/+8
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* LEDE v18.06.0-rc1: adjust config defaultsJo-Philipp Wich2018-06-225-8/+10
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* iptables: set nonshared flagJohn Crispin2018-06-221-0/+1
| | | | | | | this makes sure that offloading support is properly included for v4.14 targets. Signed-off-by: John Crispin <john@phrozen.org> (cherry picked from commit ebe1216c7cd10357c3277fb25bae4e508d4b165a)
* kernel: cleanup offload hooks on netdev unregisterChen Minqiang2018-06-221-0/+96
| | | | | Signed-off-by: Chen Minqiang <ptpt52@gmail.com> (cherry picked from commit e317bb06fdfb46cf0c6496e3db4eb020ea28b656)
* mac80211: fix up ath10k led patchJohn Crispin2018-06-221-26/+52
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mac80211: drop 355-ath9k-limit-retries-for-powersave-response-frames.patchJohn Crispin2018-06-2218-235/+153
| | | | | | | several people reported this bug to be causing drop out issues Signed-off-by: John Crispin <john@phrozen.org> (cherry picked from commit cac1a4be66f548735878beccc10dc4b1ec7ad364)
* mac80211: ath10k fix vht160 firmware crashAnsuel Smith2018-06-222-0/+182
| | | | | | | When the 160mhz width is selected the ath10k firmware crash. This fix this problem. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> (cherry picked from commit 134e832814f1986c7ee06ac00806ebb6e762fd15)